From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Sekhar Nori <nsekhar@ti.com>, Kevin Hilman <khilman@kernel.org>,
Alan Stern <stern@rowland.harvard.edu>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>,
Linus Walleij <linus.walleij@linaro.org>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 7/8] ARM: davinci: da830-evm: remove legacy usb helpers
Date: Mon, 11 Feb 2019 11:37:01 +0100 [thread overview]
Message-ID: <20190211103702.4277-8-brgl@bgdev.pl> (raw)
In-Reply-To: <20190211103702.4277-1-brgl@bgdev.pl>
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The logic implemented by these routines now lives in the da8xx-ohci
driver. Remove dead code.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
arch/arm/mach-davinci/board-da830-evm.c | 67 -------------------------
1 file changed, 67 deletions(-)
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 0712a37153a8..8d30f68773a0 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -52,8 +52,6 @@ static const short da830_evm_usb11_pins[] = {
-1
};
-static da8xx_ocic_handler_t da830_evm_usb_ocic_handler;
-
static struct gpiod_lookup_table da830_evm_usb_gpio_lookup = {
.dev_id = "ohci-da8xx",
.table = {
@@ -62,60 +60,11 @@ static struct gpiod_lookup_table da830_evm_usb_gpio_lookup = {
},
};
-static int da830_evm_usb_set_power(unsigned port, int on)
-{
- gpio_set_value(ON_BD_USB_DRV, on);
- return 0;
-}
-
-static int da830_evm_usb_get_power(unsigned port)
-{
- return gpio_get_value(ON_BD_USB_DRV);
-}
-
-static int da830_evm_usb_get_oci(unsigned port)
-{
- return !gpio_get_value(ON_BD_USB_OVC);
-}
-
-static irqreturn_t da830_evm_usb_ocic_irq(int, void *);
-
-static int da830_evm_usb_ocic_notify(da8xx_ocic_handler_t handler)
-{
- int irq = gpio_to_irq(ON_BD_USB_OVC);
- int error = 0;
-
- if (handler != NULL) {
- da830_evm_usb_ocic_handler = handler;
-
- error = request_irq(irq, da830_evm_usb_ocic_irq,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "OHCI over-current indicator", NULL);
- if (error)
- pr_err("%s: could not request IRQ to watch over-current indicator changes\n",
- __func__);
- } else
- free_irq(irq, NULL);
-
- return error;
-}
-
static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = {
- .set_power = da830_evm_usb_set_power,
- .get_power = da830_evm_usb_get_power,
- .get_oci = da830_evm_usb_get_oci,
- .ocic_notify = da830_evm_usb_ocic_notify,
-
/* TPS2065 switch @ 5V */
.potpgt = (3 + 1) / 2, /* 3 ms max */
};
-static irqreturn_t da830_evm_usb_ocic_irq(int irq, void *dev_id)
-{
- da830_evm_usb_ocic_handler(&da830_evm_usb11_pdata, 1);
- return IRQ_HANDLED;
-}
-
static __init void da830_evm_usb_init(void)
{
int ret;
@@ -150,22 +99,6 @@ static __init void da830_evm_usb_init(void)
return;
}
- ret = gpio_request(ON_BD_USB_DRV, "ON_BD_USB_DRV");
- if (ret) {
- pr_err("%s: failed to request GPIO for USB 1.1 port power control: %d\n",
- __func__, ret);
- return;
- }
- gpio_direction_output(ON_BD_USB_DRV, 0);
-
- ret = gpio_request(ON_BD_USB_OVC, "ON_BD_USB_OVC");
- if (ret) {
- pr_err("%s: failed to request GPIO for USB 1.1 port over-current indicator: %d\n",
- __func__, ret);
- return;
- }
- gpio_direction_input(ON_BD_USB_OVC);
-
gpiod_add_lookup_table(&da830_evm_usb_gpio_lookup);
ret = da8xx_register_usb11(&da830_evm_usb11_pdata);
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-02-11 10:39 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-11 10:36 [PATCH v2 0/8] ARM: davinci: move the da8xx-ohci GPIO logic into the driver Bartosz Golaszewski
2019-02-11 10:36 ` [PATCH v2 1/8] usb: ohci-da8xx: add a new line after local variables Bartosz Golaszewski
2019-02-11 10:36 ` [PATCH v2 2/8] usb: ohci-da8xx: add a helper pointer to &pdev->dev Bartosz Golaszewski
2019-02-11 10:36 ` [PATCH v2 3/8] ARM: davinci: omapl138-hawk: use gpio lookup entries for usb gpios Bartosz Golaszewski
2019-02-11 10:36 ` [PATCH v2 4/8] ARM: davinci: da830-evm: " Bartosz Golaszewski
2019-02-11 10:36 ` [PATCH v2 5/8] usb: ohci-da8xx: add vbus and overcurrent gpios Bartosz Golaszewski
2019-02-12 8:20 ` Sekhar Nori
2019-02-11 10:37 ` [PATCH v2 6/8] ARM: davinci: omapl138-hawk: remove legacy usb helpers Bartosz Golaszewski
2019-02-11 10:37 ` Bartosz Golaszewski [this message]
2019-02-11 10:37 ` [PATCH v2 8/8] usb: ohci-da8xx: remove unused callbacks from platform data Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190211103702.4277-8-brgl@bgdev.pl \
--to=brgl@bgdev.pl \
--cc=bgolaszewski@baylibre.com \
--cc=gregkh@linuxfoundation.org \
--cc=khilman@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).