Linux-ARM-Kernel Archive on
 help / color / Atom feed
From: Russell King - ARM Linux admin <>
To: Stuart Menefy <>
	Will Deacon <>,,
	Arnd Bergmann <>, Nicolas Pitre <>
Subject: Re: [PATCH] ARM: MCPM: Add provision for platform specific wfi alternative
Date: Mon, 11 Feb 2019 14:12:41 +0000
Message-ID: <> (raw)
In-Reply-To: <>

On Mon, Feb 11, 2019 at 01:53:14PM +0000, Stuart Menefy wrote:
> Folks
> On Sun, 10 Feb 2019 at 23:12, Stuart Menefy
> <> wrote:
> >
> > On some platforms (in particular the Exynos5260) the wfi is not
> > executed directly by the operating system but by trapping into the
> > secure monitor. This allows us to replicate the behaviour of the
> > vendor supplied kernel using the MCPM framework.
> >
> > Signed-off-by: Stuart Menefy <>
> I forgot to add, this is a part of a series of patches which updates
> the Exynos 5260
> support, allowing use of the kernel on secure parts and adding suspend
> functionality,
> Version 1 of the patches has been posted to the samsung-soc mailing list:
> and I'm just about to post version 2. However as this is the only patch which
> touches generic ARM files I though I'd better check the approach is acceptable
> to a wider audience.

Please don't limit patches to just the SoC specific mailing list - copy
linux-arm-kernel and linux-kernel as well.  Thanks.

RMK's Patch system:
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to 11.9Mbps down 500kbps up

linux-arm-kernel mailing list

  reply index

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-10 23:12 Stuart Menefy
2019-02-11 13:53 ` Stuart Menefy
2019-02-11 14:12   ` Russell King - ARM Linux admin [this message]
2019-02-11 15:57   ` Nicolas Pitre

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on

Archives are clonable:
	git clone --mirror linux-arm-kernel/git/0.git
	git clone --mirror linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ \
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone