Linux-ARM-Kernel Archive on lore.kernel.org
 help / Atom feed
From: Lokesh Vutla <lokeshvutla@ti.com>
To: <marc.zyngier@arm.com>, Tony Lindgren <tony@atomide.com>,
	Nishanth Menon <nm@ti.com>,
	Santosh Shilimkar <ssantosh@kernel.org>,
	Rob Herring <robh+dt@kernel.org>, <tglx@linutronix.de>,
	<jason@lakedaemon.net>
Cc: Device Tree Mailing List <devicetree@vger.kernel.org>,
	Peter Ujfalusi <peter.ujfalusi@ti.com>,
	Lokesh Vutla <lokeshvutla@ti.com>, Sekhar Nori <nsekhar@ti.com>,
	linux-kernel@vger.kernel.org, Tero Kristo <t-kristo@ti.com>,
	Linux ARM Mailing List <linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v5 06/10] irqchip: ti-sci-intr: Add support for Interrupt Router driver
Date: Tue, 12 Feb 2019 13:12:33 +0530
Message-ID: <20190212074237.2875-7-lokeshvutla@ti.com> (raw)
In-Reply-To: <20190212074237.2875-1-lokeshvutla@ti.com>

Texas Instruments' K3 generation SoCs has an IP Interrupt Router
that does allows for redirection of input interrupts to host
interrupt controller. Interrupt Router inputs are either from a
peripheral or from an Interrupt Aggregator which is another
interrupt controller.

Configuration of the interrupt router registers can only be done by
a system co-processor and the driver needs to send a message to this
co processor over TISCI protocol.

Add support for Interrupt Router driver over TISCI protocol.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
Changes since v4:
- Moved the ti_sci irq resource handling to ti-sci-common.c from ti_sci.c.
  Firmware maintainer rejected the idea of having this in firmware driver as
  the resource handling is specific to the client.
- Obtain the number of peripheral interrupts attached to INTR by parsing DT.
  Using this information store the max irqs that can be allocated to INTA.
  This is done for pre allocating the INTA irqs(vints) during inta driver
  probe.
  This will not work for cases where there are more that 1 INTAs attached to
  INTR, but wanted to show this approach as suggested by Marc.

 MAINTAINERS                         |   3 +
 drivers/irqchip/Kconfig             |  11 +
 drivers/irqchip/Makefile            |   1 +
 drivers/irqchip/irq-ti-sci-common.c | 131 ++++++++++++
 drivers/irqchip/irq-ti-sci-common.h |  59 ++++++
 drivers/irqchip/irq-ti-sci-intr.c   | 315 ++++++++++++++++++++++++++++
 6 files changed, 520 insertions(+)
 create mode 100644 drivers/irqchip/irq-ti-sci-common.c
 create mode 100644 drivers/irqchip/irq-ti-sci-common.h
 create mode 100644 drivers/irqchip/irq-ti-sci-intr.c

diff --git a/MAINTAINERS b/MAINTAINERS
index c918d9b2ee18..823eeb672cf0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15065,6 +15065,9 @@ F:	Documentation/devicetree/bindings/clock/ti,sci-clk.txt
 F:	drivers/clk/keystone/sci-clk.c
 F:	drivers/reset/reset-ti-sci.c
 F:	Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
+F:	drivers/irqchip/irq-ti-sci-intr.c
+F:	drivers/irqchip/irq-ti-sci-common.c
+F:	drivers/irqchip/irq-ti-sci-common.h
 
 Texas Instruments ASoC drivers
 M:	Peter Ujfalusi <peter.ujfalusi@ti.com>
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 3d1e60779078..a8d9bed0254b 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -406,6 +406,17 @@ config IMX_IRQSTEER
 	help
 	  Support for the i.MX IRQSTEER interrupt multiplexer/remapper.
 
+config TI_SCI_INTR_IRQCHIP
+	bool
+	depends on TI_SCI_PROTOCOL && ARCH_K3
+	select IRQ_DOMAIN
+	select IRQ_DOMAIN_HIERARCHY
+	help
+	  This enables the irqchip driver support for K3 Interrupt router
+	  over TI System Control Interface available on some new TI's SoCs.
+	  If you wish to use interrupt router irq resources managed by the
+	  TI System Controller, say Y here. Otherwise, say N.
+
 endmenu
 
 config SIFIVE_PLIC
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index c93713d24b86..0499fae148a9 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -94,3 +94,4 @@ obj-$(CONFIG_CSKY_APB_INTC)		+= irq-csky-apb-intc.o
 obj-$(CONFIG_SIFIVE_PLIC)		+= irq-sifive-plic.o
 obj-$(CONFIG_IMX_IRQSTEER)		+= irq-imx-irqsteer.o
 obj-$(CONFIG_MADERA_IRQ)		+= irq-madera.o
+obj-$(CONFIG_TI_SCI_INTR_IRQCHIP)	+= irq-ti-sci-intr.o irq-ti-sci-common.o
diff --git a/drivers/irqchip/irq-ti-sci-common.c b/drivers/irqchip/irq-ti-sci-common.c
new file mode 100644
index 000000000000..79d9c4e8ea14
--- /dev/null
+++ b/drivers/irqchip/irq-ti-sci-common.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common Code for TISCI IRQCHIP drivers
+ *
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ *	Lokesh Vutla <lokeshvutla@ti.com>
+ */
+
+#include <linux/of.h>
+#include <linux/bitmap.h>
+#include <linux/device.h>
+#include <linux/soc/ti/ti_sci_protocol.h>
+#include "irq-ti-sci-common.h"
+
+/**
+ * ti_sci_get_free_resource() - Get a free resource from TISCI resource.
+ * @res:	Pointer to the TISCI resource
+ *
+ * Return: resource num if all went ok else TI_SCI_RESOURCE_NULL.
+ */
+u16 ti_sci_get_free_resource(struct ti_sci_resource *res)
+{
+	u16 set, free_bit;
+
+	mutex_lock(&res->request_mutex);
+	for (set = 0; set < res->sets; set++) {
+		free_bit = find_first_zero_bit(res->desc[set].res_map,
+					       res->desc[set].num);
+		if (free_bit != res->desc[set].num) {
+			set_bit(free_bit, res->desc[set].res_map);
+			mutex_unlock(&res->request_mutex);
+			return res->desc[set].start + free_bit;
+		}
+	}
+	mutex_unlock(&res->request_mutex);
+
+	return TI_SCI_RESOURCE_NULL;
+}
+
+/**
+ * ti_sci_release_resource() - Release a resource from TISCI resource.
+ * @res:	Pointer to the TISCI resource
+ * @id:		Resource id to be released.
+ */
+void ti_sci_release_resource(struct ti_sci_resource *res, u16 id)
+{
+	u16 set;
+
+	mutex_lock(&res->request_mutex);
+	for (set = 0; set < res->sets; set++) {
+		if (res->desc[set].start <= id &&
+		    (res->desc[set].num + res->desc[set].start) > id)
+			clear_bit(id - res->desc[set].start,
+				  res->desc[set].res_map);
+	}
+	mutex_unlock(&res->request_mutex);
+}
+
+u32 ti_sci_get_num_resources(struct ti_sci_resource *res)
+{
+	u32 count = 0, set;
+
+	for (set = 0; set < res->sets; set++)
+		count += res->desc[set].num;
+
+	return count;
+}
+
+/**
+ * devm_ti_sci_get_of_resource() - Get a TISCI resource assigned to a device
+ * @handle:	TISCI handle
+ * @dev:	Device pointer to which the resource is assigned
+ * @of_prop:	property name by which the resource are represented
+ *
+ * Return: Pointer to ti_sci_resource if all went well else appropriate
+ *	   error pointer.
+ */
+struct ti_sci_resource *
+devm_ti_sci_get_of_resource(const struct ti_sci_handle *handle,
+			    struct device *dev, u32 dev_id, char *of_prop)
+{
+	struct ti_sci_resource *res;
+	u32 resource_subtype;
+	int i, ret;
+
+	res = devm_kzalloc(dev, sizeof(*res), GFP_KERNEL);
+	if (!res)
+		return ERR_PTR(-ENOMEM);
+
+	res->sets = of_property_count_elems_of_size(dev_of_node(dev), of_prop,
+						    sizeof(u32));
+	if (res->sets < 0) {
+		dev_err(dev, "%s resource type ids not available\n", of_prop);
+		return ERR_PTR(res->sets);
+	}
+
+	res->desc = devm_kcalloc(dev, res->sets, sizeof(*res->desc),
+				 GFP_KERNEL);
+	if (!res->desc)
+		return ERR_PTR(-ENOMEM);
+
+	for (i = 0; i < res->sets; i++) {
+		ret = of_property_read_u32_index(dev_of_node(dev), of_prop, i,
+						 &resource_subtype);
+		if (ret)
+			return ERR_PTR(-EINVAL);
+
+		ret = handle->ops.rm_core_ops.get_range(handle, dev_id,
+							resource_subtype,
+							&res->desc[i].start,
+							&res->desc[i].num);
+		if (ret) {
+			dev_err(dev, "dev = %d subtype %d not allocated for this host\n",
+				dev_id, resource_subtype);
+			return ERR_PTR(ret);
+		}
+
+		dev_dbg(dev, "dev = %d, subtype = %d, start = %d, num = %d\n",
+			dev_id, resource_subtype, res->desc[i].start,
+			res->desc[i].num);
+
+		res->desc[i].res_map =
+			devm_kzalloc(dev, BITS_TO_LONGS(res->desc[i].num) *
+				     sizeof(*res->desc[i].res_map), GFP_KERNEL);
+		if (!res->desc[i].res_map)
+			return ERR_PTR(-ENOMEM);
+	}
+	mutex_init(&res->request_mutex);
+
+	return res;
+}
diff --git a/drivers/irqchip/irq-ti-sci-common.h b/drivers/irqchip/irq-ti-sci-common.h
new file mode 100644
index 000000000000..60c4b28bebab
--- /dev/null
+++ b/drivers/irqchip/irq-ti-sci-common.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Common header file for TISCI IRQCHIP drivers
+ *
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ *	Lokesh Vutla <lokeshvutla@ti.com>
+ */
+
+#ifndef __TI_SCI_COMMON_IRQCHIP_H
+#define __TI_SCI_COMMON_IRQCHIP_H
+
+#include <linux/mutex.h>
+
+#define TI_SCI_RESOURCE_NULL	0xffff
+#define TI_SCI_DEV_ID_MASK	0xffff
+#define TI_SCI_DEV_ID_SHIFT	16
+#define TI_SCI_IRQ_ID_MASK	0xffff
+#define TI_SCI_IRQ_ID_SHIFT	0
+#define TI_SCI_VINT_IRQ		BIT(0)
+#define HWIRQ_TO_DEVID(hwirq)	(((hwirq) >> (TI_SCI_DEV_ID_SHIFT)) & \
+				 (TI_SCI_DEV_ID_MASK))
+#define HWIRQ_TO_IRQID(hwirq)	((hwirq) & (TI_SCI_IRQ_ID_MASK))
+#define TO_HWIRQ(dev, index)	((((dev) & TI_SCI_DEV_ID_MASK) << \
+				 TI_SCI_DEV_ID_SHIFT) | \
+				((index) & TI_SCI_IRQ_ID_MASK))
+
+/**
+ * struct ti_sci_resource_desc - Description of TI SCI resource instance range.
+ * @start:	Start index of the resource.
+ * @num:	Number of resources.
+ * @res_map:	Bitmap to manage the allocation of these resources.
+ */
+struct ti_sci_resource_desc {
+	u16 start;
+	u16 num;
+	unsigned long *res_map;
+};
+
+/**
+ * struct ti_sci_resource - Structure representing a resource assigned
+ *			    to a device.
+ * @sets:		Number of sets available from this resource type
+ * @request_mutex:	mutex to protect request and release of resources.
+ * @desc:		Array of resource descriptors.
+ */
+struct ti_sci_resource {
+	u16 sets;
+	/* Mutex to protect request and release of resources */
+	struct mutex request_mutex;
+	struct ti_sci_resource_desc *desc;
+};
+
+u16 ti_sci_get_free_resource(struct ti_sci_resource *res);
+void ti_sci_release_resource(struct ti_sci_resource *res, u16 id);
+u32 ti_sci_get_num_resources(struct ti_sci_resource *res);
+struct ti_sci_resource *
+devm_ti_sci_get_of_resource(const struct ti_sci_handle *handle,
+			    struct device *dev, u32 dev_id, char *of_prop);
+#endif /*__TI_SCI_COMMON_IRQCHIP_H */
diff --git a/drivers/irqchip/irq-ti-sci-intr.c b/drivers/irqchip/irq-ti-sci-intr.c
new file mode 100644
index 000000000000..7e224552a735
--- /dev/null
+++ b/drivers/irqchip/irq-ti-sci-intr.c
@@ -0,0 +1,315 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Texas Instruments' K3 Interrupt Router irqchip driver
+ *
+ * Copyright (C) 2018-2019 Texas Instruments Incorporated - http://www.ti.com/
+ *	Lokesh Vutla <lokeshvutla@ti.com>
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irqchip.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/irqdomain.h>
+#include <linux/soc/ti/ti_sci_protocol.h>
+#include "irq-ti-sci-common.h"
+
+/**
+ * struct ti_sci_intr_irq_domain - Structure representing a TISCI based
+ *				   Interrupt Router IRQ domain.
+ * @sci:	Pointer to TISCI handle
+ * @dst_irq:	TISCI resource pointer representing GIC irq controller.
+ * @vint_irqs:	Number of GIC irqs that can be allocated to INTA.
+ * @dst_id:	TISCI device ID of the GIC irq controller.
+ */
+struct ti_sci_intr_irq_domain {
+	const struct ti_sci_handle *sci;
+	struct ti_sci_resource *dst_irq;
+	u32 vint_irqs;
+	u16 dst_id;
+};
+
+static struct irq_chip ti_sci_intr_irq_chip = {
+	.name			= "INTR",
+	.irq_eoi		= irq_chip_eoi_parent,
+	.irq_mask		= irq_chip_mask_parent,
+	.irq_unmask		= irq_chip_unmask_parent,
+	.irq_retrigger		= irq_chip_retrigger_hierarchy,
+	.irq_set_type		= irq_chip_set_type_parent,
+	.irq_set_affinity	= irq_chip_set_affinity_parent,
+};
+
+/**
+ * ti_sci_intr_irq_domain_translate() - Retrieve hwirq and type from
+ *					IRQ firmware specific handler.
+ * @domain:	Pointer to IRQ domain
+ * @fwspec:	Pointer to IRQ specific firmware structure
+ * @hwirq:	IRQ number identified by hardware
+ * @type:	IRQ type
+ *
+ * Return 0 if all went ok else appropriate error.
+ */
+static int ti_sci_intr_irq_domain_translate(struct irq_domain *domain,
+					    struct irq_fwspec *fwspec,
+					    unsigned long *hwirq,
+					    unsigned int *type)
+{
+	struct ti_sci_intr_irq_domain *intr = domain->host_data;
+
+	if (fwspec->param_count != 4)
+		return -EINVAL;
+
+	*hwirq = TO_HWIRQ(fwspec->param[0], fwspec->param[1]);
+	*type = fwspec->param[2];
+
+	if (fwspec->param[3] != 0 && fwspec->param[3] != 1)
+		return -EINVAL;
+
+	if (fwspec->param[3] && intr->vint_irqs <= 0)
+		return -ERANGE;
+
+	return 0;
+}
+
+static inline void ti_sci_intr_free_gic_irq(struct ti_sci_intr_irq_domain *intr,
+					    u32 hwirq, u16 dst_irq, u8 vint_irq)
+{
+	u16 src_id, src_index;
+
+	src_id = HWIRQ_TO_DEVID(hwirq);
+	src_index = HWIRQ_TO_IRQID(hwirq);
+	intr->sci->ops.rm_irq_ops.free_irq(intr->sci, src_id, src_index,
+					   intr->dst_id, dst_irq, vint_irq);
+	ti_sci_release_resource(intr->dst_irq, dst_irq);
+	if (vint_irq == TI_SCI_VINT_IRQ)
+		intr->vint_irqs++;
+}
+
+/**
+ * ti_sci_intr_irq_domain_free() - Free the specified IRQs from the domain.
+ * @domain:	Domain to which the irqs belong
+ * @virq:	Linux virtual IRQ to be freed.
+ * @nr_irqs:	Number of continuous irqs to be freed
+ */
+static void ti_sci_intr_irq_domain_free(struct irq_domain *domain,
+					unsigned int virq, unsigned int nr_irqs)
+{
+	struct ti_sci_intr_irq_domain *intr = domain->host_data;
+	struct irq_data *data, *parent_data;
+	phys_addr_t vint_irq;
+
+	data = irq_domain_get_irq_data(domain, virq);
+	vint_irq = (phys_addr_t)irq_data_get_irq_chip_data(data);
+	parent_data = irq_domain_get_irq_data(domain->parent, virq);
+
+	ti_sci_intr_free_gic_irq(intr, data->hwirq, parent_data->hwirq,
+				 vint_irq);
+	irq_domain_free_irqs_parent(domain, virq, 1);
+	irq_domain_reset_irq_data(data);
+}
+
+/**
+ * ti_sci_intr_alloc_gic_irq() - Allocate GIC specific IRQ
+ * @domain:	Point to the interrupt router IRQ domain
+ * @virq:	Corresponding Linux virtual IRQ number
+ * @dev:	TISCI device IRQ generating the IRQ
+ * @irq:	IRQ offset within the device
+ * @flags:	Corresponding flags to the IRQ
+ * @vint_irq:	Flag to tell if requested irq is from interrupt aggregator.
+ *
+ * Returns 0 if all went well else appropriate error pointer.
+ */
+static int ti_sci_intr_alloc_gic_irq(struct irq_domain *domain,
+				     unsigned int virq, u32 hwirq, u32 flags,
+				     u8 vint_irq)
+{
+	struct ti_sci_intr_irq_domain *intr = domain->host_data;
+	struct irq_fwspec fwspec;
+	u16 src_id, src_index;
+	u16 dst_irq;
+	int err;
+
+	src_id = HWIRQ_TO_DEVID(hwirq);
+	src_index = HWIRQ_TO_IRQID(hwirq);
+
+	dst_irq = ti_sci_get_free_resource(intr->dst_irq);
+	if (dst_irq == TI_SCI_RESOURCE_NULL)
+		return -EINVAL;
+
+	fwspec.fwnode = domain->parent->fwnode;
+	fwspec.param_count = 3;
+	fwspec.param[0] = 0;	/* SPI */
+	fwspec.param[1] = dst_irq - 32; /* SPI offset */
+	fwspec.param[2] = flags & IRQ_TYPE_SENSE_MASK;
+
+	err = irq_domain_alloc_irqs_parent(domain, virq, 1, &fwspec);
+	if (err)
+		goto err_irqs;
+
+	err = intr->sci->ops.rm_irq_ops.set_irq(intr->sci, src_id, src_index,
+						intr->dst_id, dst_irq,
+						vint_irq);
+	if (err)
+		goto err_msg;
+
+	if (vint_irq == TI_SCI_VINT_IRQ)
+		intr->vint_irqs--;
+
+	return 0;
+
+err_msg:
+	irq_domain_free_irqs_parent(domain, virq, 1);
+err_irqs:
+	ti_sci_release_resource(intr->dst_irq, dst_irq);
+	return err;
+}
+
+/**
+ * ti_sci_intr_irq_domain_alloc() - Allocate Interrupt router IRQs
+ * @domain:	Point to the interrupt router IRQ domain
+ * @virq:	Corresponding Linux virtual IRQ number
+ * @nr_irqs:	Continuous irqs to be allocated
+ * @data:	Pointer to firmware specifier
+ *
+ * Return 0 if all went well else appropriate error value.
+ */
+static int ti_sci_intr_irq_domain_alloc(struct irq_domain *domain,
+					unsigned int virq, unsigned int nr_irqs,
+					void *data)
+{
+	struct irq_fwspec *fwspec = data;
+	phys_addr_t vint_irq;
+	unsigned long hwirq;
+	u32 type;
+	int err;
+
+	err = ti_sci_intr_irq_domain_translate(domain, fwspec, &hwirq, &type);
+	if (err)
+		return err;
+
+	vint_irq = fwspec->param[3] & TI_SCI_VINT_IRQ;
+
+	err = ti_sci_intr_alloc_gic_irq(domain, virq, hwirq, type, vint_irq);
+	if (err)
+		return err;
+
+	err = irq_domain_set_hwirq_and_chip(domain, virq, hwirq,
+					    &ti_sci_intr_irq_chip,
+					    (void *)vint_irq);
+	if (err) {
+		ti_sci_intr_irq_domain_free(domain, virq, 1);
+		return err;
+	}
+
+	return 0;
+}
+
+static const struct irq_domain_ops ti_sci_intr_irq_domain_ops = {
+	.alloc		= ti_sci_intr_irq_domain_alloc,
+	.free		= ti_sci_intr_irq_domain_free,
+	.translate	= ti_sci_intr_irq_domain_translate,
+};
+
+static int ti_sci_intr_irq_domain_probe(struct platform_device *pdev)
+{
+	struct irq_domain *parent_domain, *domain;
+	struct device_node *parent_node, *dn;
+	struct ti_sci_intr_irq_domain *intr;
+	struct device *dev = &pdev->dev;
+	struct of_phandle_iterator it;
+	int ret, count, intsize;
+
+	parent_node = of_irq_find_parent(dev_of_node(dev));
+	if (!parent_node) {
+		dev_err(dev, "Failed to get IRQ parent node\n");
+		return -ENODEV;
+	}
+
+	parent_domain = irq_find_host(parent_node);
+	if (!parent_domain) {
+		dev_err(dev, "Failed to find IRQ parent domain\n");
+		return -ENODEV;
+	}
+
+	intr = devm_kzalloc(dev, sizeof(*intr), GFP_KERNEL);
+	if (!intr)
+		return -ENOMEM;
+
+	intr->sci = devm_ti_sci_get_by_phandle(dev, "ti,sci");
+	if (IS_ERR(intr->sci)) {
+		ret = PTR_ERR(intr->sci);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "ti,sci read fail %d\n", ret);
+		intr->sci = NULL;
+		return ret;
+	}
+
+	ret = of_property_read_u32(dev_of_node(dev), "ti,sci-dst-id",
+				   (u32 *)&intr->dst_id);
+	if (ret) {
+		dev_err(dev, "missing 'ti,sci-dst-id' property\n");
+		return -EINVAL;
+	}
+
+	intr->dst_irq = devm_ti_sci_get_of_resource(intr->sci, dev,
+						    intr->dst_id,
+						    "ti,sci-rm-range-girq");
+	if (IS_ERR(intr->dst_irq)) {
+		dev_err(dev, "Destination irq resource allocation failed\n");
+		return PTR_ERR(intr->dst_irq);
+	}
+
+	domain = irq_domain_add_hierarchy(parent_domain, 0, 0, dev_of_node(dev),
+					  &ti_sci_intr_irq_domain_ops, intr);
+	if (!domain) {
+		dev_err(dev, "Failed to allocate IRQ domain\n");
+		return -ENOMEM;
+	}
+
+	if (of_property_read_u32(dev_of_node(dev), "#interrupt-cells",
+				 &intsize))
+		return -EINVAL;
+
+	count = 0;
+	for_each_node_with_property(dn, "interrupts") {
+		if (of_irq_find_parent(dn) != dev_of_node(dev))
+			continue;
+		count += of_property_count_elems_of_size(dn, "interrupts",
+							 sizeof(u32) * intsize);
+	}
+
+	for_each_node_with_property(dn, "interrupts-extended") {
+		of_for_each_phandle(&it, ret, dn, "interrupts-extended",
+				    "#interrupt-cells", 0) {
+			if (it.node == dev_of_node(dev))
+				count++;
+		}
+	}
+
+	intr->vint_irqs = ti_sci_get_num_resources(intr->dst_irq) - count;
+
+	return 0;
+}
+
+static const struct of_device_id ti_sci_intr_irq_domain_of_match[] = {
+	{ .compatible = "ti,sci-intr", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, ti_sci_intr_irq_domain_of_match);
+
+static struct platform_driver ti_sci_intr_irq_domain_driver = {
+	.probe = ti_sci_intr_irq_domain_probe,
+	.driver = {
+		.name = "ti-sci-intr",
+		.of_match_table = ti_sci_intr_irq_domain_of_match,
+	},
+};
+module_platform_driver(ti_sci_intr_irq_domain_driver);
+
+MODULE_AUTHOR("Lokesh Vutla <lokeshvutla@ticom>");
+MODULE_DESCRIPTION("K3 Interrupt Router driver over TI SCI protocol");
+MODULE_LICENSE("GPL v2");
-- 
2.19.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply index

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-12  7:42 [PATCH v5 00/10] Add support for TISCI irqchip drivers Lokesh Vutla
2019-02-12  7:42 ` [PATCH v5 01/10] firmware: ti_sci: Add support to get TISCI handle using of_phandle Lokesh Vutla
2019-02-12  7:42 ` [PATCH v5 02/10] firmware: ti_sci: Add support for RM core ops Lokesh Vutla
2019-02-12  7:42 ` [PATCH v5 03/10] firmware: ti_sci: Add support for IRQ management Lokesh Vutla
2019-02-12  7:42 ` [PATCH v5 04/10] firmware: ti_sci: Add RM mapping table for am654 Lokesh Vutla
2019-02-12  7:42 ` [PATCH v5 05/10] dt-bindings: irqchip: Introduce TISCI Interrupt router bindings Lokesh Vutla
2019-02-12 16:22   ` Tony Lindgren
2019-02-13  4:25     ` Lokesh Vutla
2019-02-13 15:26       ` Tony Lindgren
2019-02-13 20:40         ` Rob Herring
2019-02-14  8:38         ` Lokesh Vutla
2019-02-14 15:41           ` Tony Lindgren
2019-02-14 17:32             ` Lokesh Vutla
2019-02-14 17:46               ` Tony Lindgren
2019-02-14 18:02                 ` Lokesh Vutla
2019-02-15 16:16                   ` Tony Lindgren
2019-02-16  3:29                     ` Lokesh Vutla
2019-02-18 14:32                       ` Tony Lindgren
2019-02-19  8:51                         ` Lokesh Vutla
2019-02-19 15:35                           ` Tony Lindgren
2019-02-19 16:19                             ` Lokesh Vutla
2019-02-19 17:11                               ` Tony Lindgren
2019-02-19 17:56                                 ` Tony Lindgren
2019-02-20  5:53                                   ` Lokesh Vutla
2019-02-20 16:36                             ` Tony Lindgren
2019-02-20 17:17                               ` Lokesh Vutla
2019-02-12 16:30   ` Tony Lindgren
2019-02-13  4:22     ` Lokesh Vutla
2019-02-13 15:32       ` Tony Lindgren
2019-02-14  8:40         ` Lokesh Vutla
2019-02-14 15:42           ` Tony Lindgren
2019-02-16  3:30   ` Lokesh Vutla
2019-02-18 14:35     ` Tony Lindgren
2019-02-22 10:10       ` Peter Ujfalusi
2019-02-18 15:12   ` Marc Zyngier
2019-02-18 15:27     ` Lokesh Vutla
2019-02-12  7:42 ` Lokesh Vutla [this message]
2019-02-18 15:52   ` [PATCH v5 06/10] irqchip: ti-sci-intr: Add support for Interrupt Router driver Marc Zyngier
2019-02-20 13:17     ` Lokesh Vutla
2019-03-19 12:44       ` Lokesh Vutla
2019-02-12  7:42 ` [PATCH v5 07/10] dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings Lokesh Vutla
2019-02-12  7:42 ` [PATCH v5 08/10] irqchip: ti-sci-inta: Add support for Interrupt Aggregator driver Lokesh Vutla
2019-02-12  7:42 ` [PATCH v5 09/10] soc: ti: Add MSI domain support for K3 Interrupt Aggregator Lokesh Vutla
2019-02-13 16:41   ` Tony Lindgren
2019-02-12  7:42 ` [PATCH v5 10/10] soc: ti: am6: Enable interrupt controller drivers Lokesh Vutla
2019-02-16  3:37 ` [PATCH v5 00/10] Add support for TISCI irqchip drivers Lokesh Vutla

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190212074237.2875-7-lokeshvutla@ti.com \
    --to=lokeshvutla@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=nm@ti.com \
    --cc=nsekhar@ti.com \
    --cc=peter.ujfalusi@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=ssantosh@kernel.org \
    --cc=t-kristo@ti.com \
    --cc=tglx@linutronix.de \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org infradead-linux-arm-kernel@archiver.kernel.org
	public-inbox-index linux-arm-kernel


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox