linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Jagan Teki <jagan@amarulasolutions.com>
To: Andrzej Hajda <a.hajda@samsung.com>,
	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	Chen-Yu Tsai <wens@csie.org>,
	Maxime Ripard <maxime.ripard@bootlin.com>,
	David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	dri-devel@lists.freedesktop.org, linux-sunxi@googlegroups.com,
	Jagan Teki <jagan@amarulasolutions.com>,
	Michael Trimarchi <michael@amarulasolutions.com>,
	linux-amarula@amarulasolutions.com,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/6] drm/sun4i: dsi: Add bridge support
Date: Fri, 15 Mar 2019 18:38:22 +0530	[thread overview]
Message-ID: <20190315130825.9005-4-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20190315130825.9005-1-jagan@amarulasolutions.com>

Some display panels would come up with a non-DSI output which
can have an option to connect DSI interface by means of bridge
convertor.

This DSI to non-DSI bridge convertor would require a bridge
driver that would communicate the DSI controller for bridge
functionalities.

So, add support for bridge functionalities in Allwinner DSI
controller.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 65 +++++++++++++++++++-------
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h |  1 +
 2 files changed, 49 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index 0960b96b62cc..64d74313b842 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -781,6 +781,9 @@ static void sun6i_dsi_encoder_enable(struct drm_encoder *encoder)
 	if (!IS_ERR(dsi->panel))
 		drm_panel_prepare(dsi->panel);
 
+	if (!IS_ERR(dsi->bridge))
+		drm_bridge_pre_enable(dsi->bridge);
+
 	/*
 	 * FIXME: This should be moved after the switch to HS mode.
 	 *
@@ -796,6 +799,9 @@ static void sun6i_dsi_encoder_enable(struct drm_encoder *encoder)
 	if (!IS_ERR(dsi->panel))
 		drm_panel_enable(dsi->panel);
 
+	if (!IS_ERR(dsi->bridge))
+		drm_bridge_enable(dsi->bridge);
+
 	sun6i_dsi_start(dsi, DSI_START_HSC);
 
 	udelay(1000);
@@ -812,6 +818,9 @@ static void sun6i_dsi_encoder_disable(struct drm_encoder *encoder)
 	if (!IS_ERR(dsi->panel)) {
 		drm_panel_disable(dsi->panel);
 		drm_panel_unprepare(dsi->panel);
+	} else if (!IS_ERR(dsi->bridge)) {
+		drm_bridge_disable(dsi->bridge);
+		drm_bridge_post_disable(dsi->bridge);
 	}
 
 	phy_power_off(dsi->dphy);
@@ -973,11 +982,16 @@ static int sun6i_dsi_attach(struct mipi_dsi_host *host,
 	struct sun6i_dsi *dsi = host_to_sun6i_dsi(host);
 
 	dsi->device = device;
-	dsi->panel = of_drm_find_panel(device->dev.of_node);
-	if (IS_ERR(dsi->panel))
-		return PTR_ERR(dsi->panel);
 
-	dev_info(host->dev, "Attached device %s\n", device->name);
+	dsi->bridge = of_drm_find_bridge(device->dev.of_node);
+	if (!dsi->bridge) {
+		dsi->panel = of_drm_find_panel(device->dev.of_node);
+		if (IS_ERR(dsi->panel))
+			return PTR_ERR(dsi->panel);
+	}
+
+	dev_info(host->dev, "Attached %s %s\n",
+		 dsi->bridge ? "bridge" : "panel", device->name);
 
 	return 0;
 }
@@ -1055,8 +1069,10 @@ static int sun6i_dsi_bind(struct device *dev, struct device *master,
 	struct sun4i_tcon *tcon0 = sun4i_get_tcon0(drm);
 	int ret;
 
-	if (!dsi->panel)
+	if (!(dsi->panel || dsi->bridge)) {
+		dev_info(drm->dev, "No panel or bridge found... DSI output disabled\n");
 		return -EPROBE_DEFER;
+	}
 
 	dsi->drv = drv;
 
@@ -1078,19 +1094,29 @@ static int sun6i_dsi_bind(struct device *dev, struct device *master,
 	}
 	dsi->encoder.possible_crtcs = BIT(0);
 
-	drm_connector_helper_add(&dsi->connector,
-				 &sun6i_dsi_connector_helper_funcs);
-	ret = drm_connector_init(drm, &dsi->connector,
-				 &sun6i_dsi_connector_funcs,
-				 DRM_MODE_CONNECTOR_DSI);
-	if (ret) {
-		dev_err(dsi->dev,
-			"Couldn't initialise the DSI connector\n");
-		goto err_cleanup_connector;
+	if (dsi->panel) {
+		drm_connector_helper_add(&dsi->connector,
+					 &sun6i_dsi_connector_helper_funcs);
+		ret = drm_connector_init(drm, &dsi->connector,
+					 &sun6i_dsi_connector_funcs,
+					 DRM_MODE_CONNECTOR_DSI);
+		if (ret) {
+			dev_err(dsi->dev,
+				"Couldn't initialise the DSI connector\n");
+			goto err_cleanup_connector;
+		}
+
+		drm_connector_attach_encoder(&dsi->connector, &dsi->encoder);
+		drm_panel_attach(dsi->panel, &dsi->connector);
 	}
 
-	drm_connector_attach_encoder(&dsi->connector, &dsi->encoder);
-	drm_panel_attach(dsi->panel, &dsi->connector);
+	if (dsi->bridge) {
+		ret = drm_bridge_attach(&dsi->encoder, dsi->bridge, NULL);
+		if (ret) {
+			dev_err(dsi->dev, "Couldn't attach the DSI bridge\n");
+			goto err_cleanup_connector;
+		}
+	}
 
 	return 0;
 
@@ -1104,7 +1130,12 @@ static void sun6i_dsi_unbind(struct device *dev, struct device *master,
 {
 	struct sun6i_dsi *dsi = dev_get_drvdata(dev);
 
-	drm_panel_detach(dsi->panel);
+	if (dsi->panel)
+		drm_panel_detach(dsi->panel);
+
+	if (dsi->bridge)
+		drm_bridge_detach(dsi->bridge);
+
 }
 
 static const struct component_ops sun6i_dsi_ops = {
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
index 5c4983212f89..76874ff8e3ef 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
@@ -36,6 +36,7 @@ struct sun6i_dsi {
 	struct sun4i_tcon	*tcon;
 	struct mipi_dsi_device	*device;
 	struct drm_panel	*panel;
+	struct drm_bridge	*bridge;
 	const struct sun6i_dsi_variant	*variant;
 };
 
-- 
2.18.0.321.gffc6fa0e3


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-03-15 13:09 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-15 13:08 [PATCH 0/6] drm/bridge: Add ICN6211 MIPI-DSI/RGB bridge Jagan Teki
2019-03-15 13:08 ` [PATCH 1/6] drm/bridge: Export drm_bridge_detach Jagan Teki
2019-03-15 13:27   ` [linux-sunxi] " Paul Kocialkowski
2019-03-18 16:48     ` Jagan Teki
2019-03-18 16:57       ` Paul Kocialkowski
2019-03-18 17:07         ` Jagan Teki
2019-03-15 13:08 ` [PATCH 2/6] drm/exynos: dsi: Use drm_bridge_detach Jagan Teki
2019-03-19  3:59   ` Inki Dae
2019-03-15 13:08 ` Jagan Teki [this message]
2019-03-15 13:32   ` [linux-sunxi] [PATCH 3/6] drm/sun4i: dsi: Add bridge support Paul Kocialkowski
2019-03-15 13:45     ` Maxime Ripard
2019-03-15 13:48       ` Paul Kocialkowski
2019-05-22 12:01     ` Jagan Teki
2019-03-15 13:08 ` [PATCH 4/6] dt-bindings: display: bridge: Add ICN6211 MIPI-DSI to RGB convertor bridge Jagan Teki
2019-03-15 13:34   ` Maxime Ripard
2019-03-18 16:58     ` Jagan Teki
2019-03-19  2:59       ` [linux-sunxi] " Chen-Yu Tsai
2019-03-19  7:48         ` Jagan Teki
2019-03-19  8:35       ` Maxime Ripard
2019-03-15 13:08 ` [PATCH 5/6] drm/bridge: Add Chipone ICN6211 MIPI-DSI/RGB " Jagan Teki
2019-03-15 13:33   ` Maxime Ripard
2019-03-17 16:30     ` Laurent Pinchart
2019-03-18 17:59     ` Jagan Teki
2019-03-19  3:05       ` [linux-sunxi] " Chen-Yu Tsai
2019-03-15 13:08 ` [PATCH 6/6] arm64: dts: allwinner: bananapi-m64: Enable S070WV20-CT16 DSI panel Jagan Teki
2019-03-15 13:25   ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190315130825.9005-4-jagan@amarulasolutions.com \
    --to=jagan@amarulasolutions.com \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=a.hajda@samsung.com \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-amarula@amarulasolutions.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=michael@amarulasolutions.com \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).