From: Julien Grall <julien.grall@arm.com>
To: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
kvmarm@lists.cs.columbia.edu
Cc: suzuki.poulose@arm.com, marc.zyngier@arm.com,
catalin.marinas@arm.com, julien.thierry@arm.com,
will.deacon@arm.com, christoffer.dall@arm.com,
Julien Grall <julien.grall@arm.com>,
james.morse@arm.com
Subject: [PATCH RFC 03/14] arm64/mm: Move bits to asid_info
Date: Thu, 21 Mar 2019 16:36:12 +0000 [thread overview]
Message-ID: <20190321163623.20219-4-julien.grall@arm.com> (raw)
In-Reply-To: <20190321163623.20219-1-julien.grall@arm.com>
The variable bits hold information for a given ASID allocator. So move
it to the asid_info structure.
Because most of the macros were relying on bits, they are now taking an
extra parameter that is a pointer to the asid_info structure.
Signed-off-by: Julien Grall <julien.grall@arm.com>
---
arch/arm64/mm/context.c | 59 +++++++++++++++++++++++++------------------------
1 file changed, 30 insertions(+), 29 deletions(-)
diff --git a/arch/arm64/mm/context.c b/arch/arm64/mm/context.c
index cfe4c5f7abf3..da17ed6c7117 100644
--- a/arch/arm64/mm/context.c
+++ b/arch/arm64/mm/context.c
@@ -27,7 +27,6 @@
#include <asm/smp.h>
#include <asm/tlbflush.h>
-static u32 asid_bits;
static DEFINE_RAW_SPINLOCK(cpu_asid_lock);
struct asid_info
@@ -36,6 +35,7 @@ struct asid_info
unsigned long *map;
atomic64_t __percpu *active;
u64 __percpu *reserved;
+ u32 bits;
} asid_info;
#define active_asid(info, cpu) *per_cpu_ptr((info)->active, cpu)
@@ -46,17 +46,17 @@ static DEFINE_PER_CPU(u64, reserved_asids);
static cpumask_t tlb_flush_pending;
-#define ASID_MASK (~GENMASK(asid_bits - 1, 0))
-#define ASID_FIRST_VERSION (1UL << asid_bits)
+#define ASID_MASK(info) (~GENMASK((info)->bits - 1, 0))
+#define ASID_FIRST_VERSION(info) (1UL << ((info)->bits))
#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
-#define NUM_USER_ASIDS (ASID_FIRST_VERSION >> 1)
-#define asid2idx(asid) (((asid) & ~ASID_MASK) >> 1)
-#define idx2asid(idx) (((idx) << 1) & ~ASID_MASK)
+#define NUM_USER_ASIDS(info) (ASID_FIRST_VERSION(info) >> 1)
+#define asid2idx(info, asid) (((asid) & ~ASID_MASK(info)) >> 1)
+#define idx2asid(info, idx) (((idx) << 1) & ~ASID_MASK(info))
#else
-#define NUM_USER_ASIDS (ASID_FIRST_VERSION)
-#define asid2idx(asid) ((asid) & ~ASID_MASK)
-#define idx2asid(idx) asid2idx(idx)
+#define NUM_USER_ASIDS(info) (ASID_FIRST_VERSION(info))
+#define asid2idx(info, asid) ((asid) & ~ASID_MASK(info))
+#define idx2asid(info, idx) asid2idx(info, idx)
#endif
/* Get the ASIDBits supported by the current CPU */
@@ -86,13 +86,13 @@ void verify_cpu_asid_bits(void)
{
u32 asid = get_cpu_asid_bits();
- if (asid < asid_bits) {
+ if (asid < asid_info.bits) {
/*
* We cannot decrease the ASID size at runtime, so panic if we support
* fewer ASID bits than the boot CPU.
*/
pr_crit("CPU%d: smaller ASID size(%u) than boot CPU (%u)\n",
- smp_processor_id(), asid, asid_bits);
+ smp_processor_id(), asid, asid_info.bits);
cpu_panic_kernel();
}
}
@@ -103,7 +103,7 @@ static void flush_context(struct asid_info *info)
u64 asid;
/* Update the list of reserved ASIDs and the ASID bitmap. */
- bitmap_clear(info->map, 0, NUM_USER_ASIDS);
+ bitmap_clear(info->map, 0, NUM_USER_ASIDS(info));
for_each_possible_cpu(i) {
asid = atomic64_xchg_relaxed(&active_asid(info, i), 0);
@@ -116,7 +116,7 @@ static void flush_context(struct asid_info *info)
*/
if (asid == 0)
asid = reserved_asid(info, i);
- __set_bit(asid2idx(asid), info->map);
+ __set_bit(asid2idx(info, asid), info->map);
reserved_asid(info, i) = asid;
}
@@ -159,7 +159,7 @@ static u64 new_context(struct asid_info *info, struct mm_struct *mm)
u64 generation = atomic64_read(&info->generation);
if (asid != 0) {
- u64 newasid = generation | (asid & ~ASID_MASK);
+ u64 newasid = generation | (asid & ~ASID_MASK(info));
/*
* If our current ASID was active during a rollover, we
@@ -172,7 +172,7 @@ static u64 new_context(struct asid_info *info, struct mm_struct *mm)
* We had a valid ASID in a previous life, so try to re-use
* it if possible.
*/
- if (!__test_and_set_bit(asid2idx(asid), info->map))
+ if (!__test_and_set_bit(asid2idx(info, asid), info->map))
return newasid;
}
@@ -183,22 +183,22 @@ static u64 new_context(struct asid_info *info, struct mm_struct *mm)
* a reserved TTBR0 for the init_mm and we allocate ASIDs in even/odd
* pairs.
*/
- asid = find_next_zero_bit(info->map, NUM_USER_ASIDS, cur_idx);
- if (asid != NUM_USER_ASIDS)
+ asid = find_next_zero_bit(info->map, NUM_USER_ASIDS(info), cur_idx);
+ if (asid != NUM_USER_ASIDS(info))
goto set_asid;
/* We're out of ASIDs, so increment the global generation count */
- generation = atomic64_add_return_relaxed(ASID_FIRST_VERSION,
+ generation = atomic64_add_return_relaxed(ASID_FIRST_VERSION(info),
&info->generation);
flush_context(info);
/* We have more ASIDs than CPUs, so this will always succeed */
- asid = find_next_zero_bit(info->map, NUM_USER_ASIDS, 1);
+ asid = find_next_zero_bit(info->map, NUM_USER_ASIDS(info), 1);
set_asid:
__set_bit(asid, info->map);
cur_idx = asid;
- return idx2asid(asid) | generation;
+ return idx2asid(info, asid) | generation;
}
void check_and_switch_context(struct mm_struct *mm, unsigned int cpu)
@@ -228,7 +228,7 @@ void check_and_switch_context(struct mm_struct *mm, unsigned int cpu)
*/
old_active_asid = atomic64_read(&active_asid(info, cpu));
if (old_active_asid &&
- !((asid ^ atomic64_read(&info->generation)) >> asid_bits) &&
+ !((asid ^ atomic64_read(&info->generation)) >> info->bits) &&
atomic64_cmpxchg_relaxed(&active_asid(info, cpu),
old_active_asid, asid))
goto switch_mm_fastpath;
@@ -236,7 +236,7 @@ void check_and_switch_context(struct mm_struct *mm, unsigned int cpu)
raw_spin_lock_irqsave(&cpu_asid_lock, flags);
/* Check that our ASID belongs to the current generation. */
asid = atomic64_read(&mm->context.id);
- if ((asid ^ atomic64_read(&info->generation)) >> asid_bits) {
+ if ((asid ^ atomic64_read(&info->generation)) >> info->bits) {
asid = new_context(info, mm);
atomic64_set(&mm->context.id, asid);
}
@@ -272,23 +272,24 @@ static int asids_init(void)
{
struct asid_info *info = &asid_info;
- asid_bits = get_cpu_asid_bits();
+ info->bits = get_cpu_asid_bits();
/*
* Expect allocation after rollover to fail if we don't have at least
* one more ASID than CPUs. ASID #0 is reserved for init_mm.
*/
- WARN_ON(NUM_USER_ASIDS - 1 <= num_possible_cpus());
- atomic64_set(&info->generation, ASID_FIRST_VERSION);
- info->map = kcalloc(BITS_TO_LONGS(NUM_USER_ASIDS), sizeof(*info->map),
- GFP_KERNEL);
+ WARN_ON(NUM_USER_ASIDS(info) - 1 <= num_possible_cpus());
+ atomic64_set(&info->generation, ASID_FIRST_VERSION(info));
+ info->map = kcalloc(BITS_TO_LONGS(NUM_USER_ASIDS(info)),
+ sizeof(*info->map), GFP_KERNEL);
if (!info->map)
panic("Failed to allocate bitmap for %lu ASIDs\n",
- NUM_USER_ASIDS);
+ NUM_USER_ASIDS(info));
info->active = &active_asids;
info->reserved = &reserved_asids;
- pr_info("ASID allocator initialised with %lu entries\n", NUM_USER_ASIDS);
+ pr_info("ASID allocator initialised with %lu entries\n",
+ NUM_USER_ASIDS(info));
return 0;
}
early_initcall(asids_init);
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-03-21 16:37 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-21 16:36 [PATCH RFC 00/14] kvm/arm: Align the VMID allocation with the arm64 ASID one Julien Grall
2019-03-21 16:36 ` [PATCH RFC 01/14] arm64/mm: Introduce asid_info structure and move asid_generation/asid_map to it Julien Grall
2019-03-21 17:03 ` Suzuki K Poulose
2019-03-21 17:27 ` Julien Grall
2019-03-21 16:36 ` [PATCH RFC 02/14] arm64/mm: Move active_asids and reserved_asids to asid_info Julien Grall
2019-03-21 16:36 ` Julien Grall [this message]
2019-03-21 16:36 ` [PATCH RFC 04/14] arm64/mm: Move the variable lock and tlb_flush_pending " Julien Grall
2019-03-21 16:36 ` [PATCH RFC 05/14] arm64/mm: Remove dependency on MM in new_context Julien Grall
2019-03-21 16:36 ` [PATCH RFC 06/14] arm64/mm: Store the number of asid allocated per context Julien Grall
2019-03-21 16:36 ` [PATCH RFC 07/14] arm64/mm: Introduce NUM_ASIDS Julien Grall
2019-03-21 16:36 ` [PATCH RFC 08/14] arm64/mm: Split asid_inits in 2 parts Julien Grall
2019-03-21 16:36 ` [PATCH RFC 09/14] arm64/mm: Split the function check_and_switch_context in 3 parts Julien Grall
2019-03-21 16:36 ` [PATCH RFC 10/14] arm64/mm: Introduce a callback to flush the local context Julien Grall
2019-03-21 16:36 ` [PATCH RFC 11/14] arm64: Move the ASID allocator code in a separate file Julien Grall
2019-06-05 16:56 ` Julien Grall
2019-06-05 20:41 ` Palmer Dabbelt
2019-06-11 1:56 ` Gary Guo
2019-06-19 8:07 ` Guo Ren
2019-06-19 8:54 ` Julien Grall
2019-06-19 9:12 ` Will Deacon
2019-06-19 12:18 ` Guo Ren
2019-06-19 12:39 ` Will Deacon
2019-06-20 9:33 ` Guo Ren
2019-06-24 10:40 ` Will Deacon
2019-06-25 7:25 ` Palmer Dabbelt
2019-09-07 23:52 ` Guo Ren
2019-09-12 14:02 ` Will Deacon
2019-09-12 14:59 ` Guo Ren
[not found] ` <CAJF2gTTsHCsSpf1ncVb=ZJS2d=r+AdDi2=5z-REVS=uUg9138A@mail.gmail.com>
2019-09-14 8:49 ` Guo Ren
2019-09-16 12:57 ` Jean-Philippe Brucker
2019-09-19 13:07 ` Guo Ren
2019-09-19 15:18 ` Jean-Philippe Brucker
2019-09-20 0:07 ` Guo Ren
2019-09-20 7:18 ` Jean-Philippe Brucker
2019-09-14 14:01 ` Palmer Dabbelt
2019-09-15 5:03 ` Anup Patel
2019-09-16 18:18 ` Will Deacon
2019-09-16 18:28 ` Palmer Dabbelt
2019-09-17 3:42 ` Anup Patel
2019-09-19 13:36 ` Guo Ren
2019-06-19 11:51 ` Guo Ren
2019-06-19 12:52 ` Julien Grall
2019-06-21 14:16 ` Catalin Marinas
2019-06-23 16:35 ` Guo Ren
2019-06-24 10:22 ` Will Deacon
2019-06-27 9:41 ` qi.fuli
2019-06-27 10:26 ` Will Deacon
2019-06-24 15:38 ` Catalin Marinas
2019-06-30 4:29 ` Guo Ren
2019-07-01 9:17 ` Catalin Marinas
2019-07-16 3:31 ` Guo Ren
2019-07-22 16:38 ` Catalin Marinas
2019-03-21 16:36 ` [PATCH RFC 12/14] arm64/lib: asid: Allow user to update the context under the lock Julien Grall
2019-03-21 16:36 ` [PATCH RFC 13/14] arm/kvm: Introduce a new VMID allocator Julien Grall
2019-03-21 16:36 ` [PATCH RFC 14/14] kvm/arm: Align the VMID allocation with the arm64 ASID one Julien Grall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190321163623.20219-4-julien.grall@arm.com \
--to=julien.grall@arm.com \
--cc=catalin.marinas@arm.com \
--cc=christoffer.dall@arm.com \
--cc=james.morse@arm.com \
--cc=julien.thierry@arm.com \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=suzuki.poulose@arm.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).