From: Zhiyong Tao <zhiyong.tao@mediatek.com>
To: <robh+dt@kernel.org>, <linus.walleij@linaro.org>,
<mark.rutland@arm.com>, <matthias.bgg@gmail.com>,
<sean.wang@kernel.org>
Cc: devicetree@vger.kernel.org, sean.wang@mediatek.com,
srv_heupstream@mediatek.com, chuanjia.liu@mediatek.com,
biao.huang@mediatek.com, zhiyong.tao@mediatek.com,
erin.lo@mediatek.com, hui.liu@mediatek.com,
linux-kernel@vger.kernel.org, hongzhou.yang@mediatek.com,
linux-mediatek@lists.infradead.org, linux-gpio@vger.kernel.org,
eddie.huang@mediatek.com, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/4] pinctrl: add drive for I2C related pins on MT8183
Date: Mon, 25 Mar 2019 20:23:02 +0800 [thread overview]
Message-ID: <20190325122302.5483-5-zhiyong.tao@mediatek.com> (raw)
In-Reply-To: <20190325122302.5483-1-zhiyong.tao@mediatek.com>
This patch provides the advanced drive for I2C used pins on MT8183.
The detail strength specification description of the I2C pin:
When E1=0/E0=0, the strength is 0.125mA.
When E1=0/E0=1, the strength is 0.25mA.
When E1=1/E0=0, the strength is 0.5mA.
When E1=1/E0=1, the strength is 1mA.
For I2C pins, there are existing generic driving setup and the above
specific driving setup. I2C pins can only support 2/4/6/8/10/12/14/16mA
driving adjustment in generic driving setup. But in specific driving
setup, they can support 0.125/0.25/0.5/1mA adjustment.
If we enable specific driving setup for I2C pins,
the existing generic driving setup will be disabled.
For some special features, we need the I2C pins specific driving setup.
The specific driving setup is controlled by E1E0EN.
So we need add extra vendor driving preperty instead of the generic
driving property. We can add "mediatek,drive-strength-adv = <XXX>;"
to describe the specific driving setup property.
"XXX" means the value of E1E0EN. So the valid arguments of
"mediatek,drive-strength-adv" are from 0 to 7.
Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
---
drivers/pinctrl/mediatek/pinctrl-mt8183.c | 50 ++++++++++++++++++++++++
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c | 47 ++++++++++++++++++++++
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h | 11 ++++++
drivers/pinctrl/mediatek/pinctrl-paris.c | 12 ++++++
4 files changed, 120 insertions(+)
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8183.c b/drivers/pinctrl/mediatek/pinctrl-mt8183.c
index 6262fd3678ea..2c7409ed16fa 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt8183.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt8183.c
@@ -472,6 +472,51 @@ static const struct mtk_pin_field_calc mt8183_pin_r1_range[] = {
PIN_FIELD_BASE(133, 133, 8, 0x0D0, 0x10, 13, 1),
};
+static const struct mtk_pin_field_calc mt8183_pin_e1e0en_range[] = {
+ PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 20, 1),
+ PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 15, 1),
+ PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 12, 1),
+ PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 7, 1),
+ PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 12, 1),
+ PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 9, 1),
+ PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 19, 1),
+ PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 22, 1),
+ PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 24, 1),
+ PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 14, 1),
+ PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 27, 1),
+ PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 17, 1),
+};
+
+static const struct mtk_pin_field_calc mt8183_pin_e0_range[] = {
+ PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 21, 1),
+ PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 16, 1),
+ PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 13, 1),
+ PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 8, 1),
+ PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 13, 1),
+ PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 10, 1),
+ PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 20, 1),
+ PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 23, 1),
+ PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 25, 1),
+ PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 15, 1),
+ PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 28, 1),
+ PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 18, 1),
+};
+
+static const struct mtk_pin_field_calc mt8183_pin_e1_range[] = {
+ PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 22, 1),
+ PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 17, 1),
+ PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 14, 1),
+ PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 9, 1),
+ PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 14, 1),
+ PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 11, 1),
+ PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 21, 1),
+ PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 24, 1),
+ PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 26, 1),
+ PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 16, 1),
+ PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 29, 1),
+ PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 19, 1),
+};
+
static const struct mtk_pin_reg_calc mt8183_reg_cals[PINCTRL_PIN_REG_MAX] = {
[PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt8183_pin_mode_range),
[PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt8183_pin_dir_range),
@@ -485,6 +530,9 @@ static const struct mtk_pin_reg_calc mt8183_reg_cals[PINCTRL_PIN_REG_MAX] = {
[PINCTRL_PIN_REG_PUPD] = MTK_RANGE(mt8183_pin_pupd_range),
[PINCTRL_PIN_REG_R0] = MTK_RANGE(mt8183_pin_r0_range),
[PINCTRL_PIN_REG_R1] = MTK_RANGE(mt8183_pin_r1_range),
+ [PINCTRL_PIN_REG_DRV_EN] = MTK_RANGE(mt8183_pin_e1e0en_range),
+ [PINCTRL_PIN_REG_DRV_E0] = MTK_RANGE(mt8183_pin_e0_range),
+ [PINCTRL_PIN_REG_DRV_E1] = MTK_RANGE(mt8183_pin_e1_range),
};
static const char * const mt8183_pinctrl_register_base_names[] = {
@@ -517,6 +565,8 @@ static const struct mtk_pin_soc mt8183_data = {
.drive_get = mtk_pinconf_drive_get_rev1,
.adv_pull_get = mtk_pinconf_adv_pull_get,
.adv_pull_set = mtk_pinconf_adv_pull_set,
+ .adv_drive_get = mtk_pinconf_adv_drive_get,
+ .adv_drive_set = mtk_pinconf_adv_drive_set,
};
static const struct of_device_id mt8183_pinctrl_of_match[] = {
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
index b1c368455d30..ef8732e8966b 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
@@ -674,3 +674,50 @@ int mtk_pinconf_adv_pull_get(struct mtk_pinctrl *hw,
return 0;
}
+
+int mtk_pinconf_adv_drive_set(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc, u32 arg)
+{
+ int err;
+
+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_EN, arg & 1);
+ if (err)
+ return err;
+
+ if (arg & 1) {
+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_E0,
+ !!(arg & 2));
+ if (err)
+ return err;
+
+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_E1,
+ !!(arg & 4));
+ if (err)
+ return err;
+ }
+
+ return err;
+}
+
+int mtk_pinconf_adv_drive_get(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc, u32 *val)
+{
+ u32 en, e0, e1;
+ int err;
+
+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_EN, &en);
+ if (err)
+ return err;
+
+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_E0, &e0);
+ if (err)
+ return err;
+
+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_E1, &e1);
+ if (err)
+ return err;
+
+ *val = (e0 | e1 << 1 | en << 2) & 0x7;
+
+ return 0;
+}
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
index 6d24522739d9..1b7da42aa1d5 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
@@ -63,6 +63,9 @@ enum {
PINCTRL_PIN_REG_IES,
PINCTRL_PIN_REG_PULLEN,
PINCTRL_PIN_REG_PULLSEL,
+ PINCTRL_PIN_REG_DRV_EN,
+ PINCTRL_PIN_REG_DRV_E0,
+ PINCTRL_PIN_REG_DRV_E1,
PINCTRL_PIN_REG_MAX,
};
@@ -224,6 +227,10 @@ struct mtk_pin_soc {
int (*adv_pull_get)(struct mtk_pinctrl *hw,
const struct mtk_pin_desc *desc, bool pullup,
u32 *val);
+ int (*adv_drive_set)(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc, u32 arg);
+ int (*adv_drive_get)(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc, u32 *val);
/* Specific driver data */
void *driver_data;
@@ -287,5 +294,9 @@ int mtk_pinconf_adv_pull_set(struct mtk_pinctrl *hw,
int mtk_pinconf_adv_pull_get(struct mtk_pinctrl *hw,
const struct mtk_pin_desc *desc, bool pullup,
u32 *val);
+int mtk_pinconf_adv_drive_set(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc, u32 arg);
+int mtk_pinconf_adv_drive_get(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc, u32 *val);
#endif /* __PINCTRL_MTK_COMMON_V2_H */
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index b59e10852bfb..dcd295f0eb4b 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -20,12 +20,14 @@
#define MTK_PIN_CONFIG_RDSEL (PIN_CONFIG_END + 2)
#define MTK_PIN_CONFIG_PU_ADV (PIN_CONFIG_END + 3)
#define MTK_PIN_CONFIG_PD_ADV (PIN_CONFIG_END + 4)
+#define MTK_PIN_CONFIG_DRV_ADV (PIN_CONFIG_END + 5)
static const struct pinconf_generic_params mtk_custom_bindings[] = {
{"mediatek,tdsel", MTK_PIN_CONFIG_TDSEL, 0},
{"mediatek,rdsel", MTK_PIN_CONFIG_RDSEL, 0},
{"mediatek,pull-up-adv", MTK_PIN_CONFIG_PU_ADV, 1},
{"mediatek,pull-down-adv", MTK_PIN_CONFIG_PD_ADV, 1},
+ {"mediatek,drive-strength-adv", MTK_PIN_CONFIG_DRV_ADV, 2},
};
#ifdef CONFIG_DEBUG_FS
@@ -34,6 +36,7 @@ static const struct pin_config_item mtk_conf_items[] = {
PCONFDUMP(MTK_PIN_CONFIG_RDSEL, "rdsel", NULL, true),
PCONFDUMP(MTK_PIN_CONFIG_PU_ADV, "pu-adv", NULL, true),
PCONFDUMP(MTK_PIN_CONFIG_PD_ADV, "pd-adv", NULL, true),
+ PCONFDUMP(MTK_PIN_CONFIG_DRV_ADV, "drive-strengt-adv", NULL, true),
};
#endif
@@ -311,6 +314,15 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
return -ENOTSUPP;
}
break;
+ case MTK_PIN_CONFIG_DRV_ADV:
+ if (hw->soc->adv_drive_set) {
+ err = hw->soc->adv_drive_set(hw, desc, arg);
+ if (err)
+ return err;
+ } else {
+ return -ENOTSUPP;
+ }
+ break;
default:
err = -ENOTSUPP;
}
--
2.12.5
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-03-25 12:24 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-25 12:22 [PATCH v3 0/4] PINCTRL: Mediatek pinctrl patch on mt8183 Zhiyong Tao
2019-03-25 12:22 ` [PATCH 1/4] dt-bindings: pinctrl: mt8183: add binding document Zhiyong Tao
2019-03-25 12:23 ` [PATCH 2/4] arm64: dts: mt8183: add pintcrl file Zhiyong Tao
2019-03-25 19:30 ` Rob Herring
2019-03-26 2:54 ` Zhiyong Tao
2019-03-25 12:23 ` [PATCH 3/4] arm64: dts: mt8183: add pintcrl device node Zhiyong Tao
2019-03-25 12:23 ` Zhiyong Tao [this message]
2019-03-25 18:25 ` [PATCH 4/4] pinctrl: add drive for I2C related pins on MT8183 Nicolas Boichat
2019-03-26 3:10 ` Zhiyong Tao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190325122302.5483-5-zhiyong.tao@mediatek.com \
--to=zhiyong.tao@mediatek.com \
--cc=biao.huang@mediatek.com \
--cc=chuanjia.liu@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=eddie.huang@mediatek.com \
--cc=erin.lo@mediatek.com \
--cc=hongzhou.yang@mediatek.com \
--cc=hui.liu@mediatek.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=sean.wang@kernel.org \
--cc=sean.wang@mediatek.com \
--cc=srv_heupstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).