linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: Nishanth Menon <nm@ti.com>, Tero Kristo <t-kristo@ti.com>,
	Dave Gerlach <d-gerlach@ti.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-kernel@vger.kernel.org,
	Peter Ujfalusi <peter.ujfalusi@ti.com>,
	Faiz Abbas <faiz_abbas@ti.com>, Keerthy <j-keerthy@ti.com>,
	linux-arm-kernel@lists.infradead.org,
	Roger Quadros <rogerq@ti.com>
Subject: Re: [PATCH 11/14] bus: ti-sysc: Add quirk handling for external optional functional clock
Date: Mon, 8 Apr 2019 09:51:20 -0700	[thread overview]
Message-ID: <20190408165120.GJ49658@atomide.com> (raw)
In-Reply-To: <20190325215849.13182-12-tony@atomide.com>

* Tony Lindgren <tony@atomide.com> [190325 22:00]:
> @@ -200,6 +278,12 @@ static int sysc_get_clocks(struct sysc *ddata)
>  	if (ddata->nr_clocks < 1)
>  		return 0;
>  
> +	if ((ddata->cfg.quirks & SYSC_QUIRK_EXT_OPT_CLOCK)) {
> +		error = sysc_init_ext_opt_clock(ddata, NULL);
> +		if (error)
> +			return error;
> +	}
> +

After some more testing with mcpdm, these flags are not enough
for dropping the platform data. We need to use the same flags
as in platform data, and add SYSC_QUIRK_NO_RESET_ON_INIT and
SYSC_QUIRK_SWSUP_SIDLE to avoid patching this again. Updated
patch below.

Regards,

Tony

8< ----------------------
From tony Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 21 Mar 2019 11:00:21 -0700
Subject: [PATCH] bus: ti-sysc: Add quirk handling for external optional
 functional clock

We cannot access mcpdm registers at all unless there is an optional pdmclk
configured. As this is currently only needed for mcpdm, let's check for
mcpdm in sysc_get_clocks(). If it turns out to be needed for other modules
too, we can add more flags to the quirks table for this.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/bus/ti-sysc.c                 | 91 ++++++++++++++++++++++++++-
 include/linux/platform_data/ti-sysc.h |  1 +
 2 files changed, 91 insertions(+), 1 deletion(-)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -47,7 +47,10 @@ enum sysc_clocks {
 	SYSC_MAX_CLOCKS,
 };
 
-static const char * const clock_names[SYSC_ICK + 1] = { "fck", "ick", };
+static const char * const clock_names[SYSC_MAX_CLOCKS] = {
+	"fck", "ick", "opt0", "opt1", "opt2", "opt3", "opt4",
+	"opt5", "opt6", "opt7",
+};
 
 #define SYSC_IDLEMODE_MASK		3
 #define SYSC_CLOCKACTIVITY_MASK		3
@@ -129,6 +132,81 @@ static u32 sysc_read_revision(struct sysc *ddata)
 	return sysc_read(ddata, offset);
 }
 
+static int sysc_add_named_clock_from_child(struct sysc *ddata,
+					   const char *name,
+					   const char *optfck_name)
+{
+	struct device_node *np = ddata->dev->of_node;
+	struct device_node *child;
+	struct clk_lookup *cl;
+	struct clk *clock;
+	const char *n;
+
+	if (name)
+		n = name;
+	else
+		n = optfck_name;
+
+	/* Does the clock alias already exist? */
+	clock = of_clk_get_by_name(np, n);
+	if (!IS_ERR(clock)) {
+		clk_put(clock);
+
+		return 0;
+	}
+
+	child = of_get_next_available_child(np, NULL);
+	if (!child)
+		return -ENODEV;
+
+	clock = devm_get_clk_from_child(ddata->dev, child, name);
+	if (IS_ERR(clock))
+		return PTR_ERR(clock);
+
+	/*
+	 * Use clkdev_add() instead of clkdev_alloc() to avoid the MAX_DEV_ID
+	 * limit for clk_get(). If cl ever needs to be freed, it should be done
+	 * with clkdev_drop().
+	 */
+	cl = kcalloc(1, sizeof(*cl), GFP_KERNEL);
+	if (!cl)
+		return -ENOMEM;
+
+	cl->con_id = n;
+	cl->dev_id = dev_name(ddata->dev);
+	cl->clk = clock;
+	clkdev_add(cl);
+
+	clk_put(clock);
+
+	return 0;
+}
+
+static int sysc_init_ext_opt_clock(struct sysc *ddata, const char *name)
+{
+	const char *optfck_name;
+	int error, index;
+
+	if (ddata->nr_clocks < SYSC_OPTFCK0)
+		index = SYSC_OPTFCK0;
+	else
+		index = ddata->nr_clocks;
+
+	if (name)
+		optfck_name = name;
+	else
+		optfck_name = clock_names[index];
+
+	error = sysc_add_named_clock_from_child(ddata, name, optfck_name);
+	if (error)
+		return error;
+
+	ddata->clock_roles[index] = optfck_name;
+	ddata->nr_clocks++;
+
+	return 0;
+}
+
 static int sysc_get_one_clock(struct sysc *ddata, const char *name)
 {
 	int error, i, index = -ENODEV;
@@ -200,6 +278,12 @@ static int sysc_get_clocks(struct sysc *ddata)
 	if (ddata->nr_clocks < 1)
 		return 0;
 
+	if ((ddata->cfg.quirks & SYSC_QUIRK_EXT_OPT_CLOCK)) {
+		error = sysc_init_ext_opt_clock(ddata, NULL);
+		if (error)
+			return error;
+	}
+
 	if (ddata->nr_clocks > SYSC_MAX_CLOCKS) {
 		dev_err(ddata->dev, "too many clocks for %pOF\n", np);
 
@@ -901,6 +985,11 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 	SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47422e03, 0xffffffff,
 		   SYSC_QUIRK_LEGACY_IDLE),
 
+	/* Quirks that need to be set based on the module address */
+	SYSC_QUIRK("mcpdm", 0x40132000, 0, 0x10, -1, 0x50000800, 0xffffffff,
+		   SYSC_QUIRK_EXT_OPT_CLOCK | SYSC_QUIRK_NO_RESET_ON_INIT |
+		   SYSC_QUIRK_SWSUP_SIDLE),
+
 #ifdef DEBUG
 	SYSC_QUIRK("adc", 0, 0, 0x10, -1, 0x47300001, 0xffffffff, 0),
 	SYSC_QUIRK("atl", 0, 0, -1, -1, 0x0a070100, 0xffffffff, 0),
diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h
--- a/include/linux/platform_data/ti-sysc.h
+++ b/include/linux/platform_data/ti-sysc.h
@@ -46,6 +46,7 @@ struct sysc_regbits {
 	s8 emufree_shift;
 };
 
+#define SYSC_QUIRK_EXT_OPT_CLOCK	BIT(10)
 #define SYSC_QUIRK_LEGACY_IDLE		BIT(9)
 #define SYSC_QUIRK_RESET_STATUS		BIT(8)
 #define SYSC_QUIRK_NO_IDLE		BIT(7)
-- 
2.21.0

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2019-04-08 16:51 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-25 21:58 [PATCH 00/14] ti-sysc changes to probe devices with dts data only Tony Lindgren
2019-03-25 21:58 ` [PATCH 01/14] bus: ti-sysc: Fix sysc_unprepare() when no clocks have been allocated Tony Lindgren
2019-03-25 21:58 ` [PATCH 02/14] bus: ti-sysc: Handle missed no-idle property in addition to no-idle-on-init Tony Lindgren
2019-03-31  6:41   ` Rob Herring
2019-03-25 21:58 ` [PATCH 03/14] bus: ti-sysc: Make functions static Tony Lindgren
2019-03-25 21:58 ` [PATCH 04/14] bus: ti-sysc: Move legacy platform data idling into separate functions Tony Lindgren
2019-03-25 21:58 ` [PATCH 05/14] bus: ti-sysc: Add separate functions for handling clocks Tony Lindgren
2019-04-03 18:00   ` Tony Lindgren
2019-03-25 21:58 ` [PATCH 06/14] bus: ti-sysc: Enable all clocks directly during init to read revision Tony Lindgren
2019-03-25 21:58 ` [PATCH 07/14] bus: ti-sysc: Allocate mdata as needed and do platform data based init later Tony Lindgren
2019-03-25 21:58 ` [PATCH 08/14] bus: ti-sysc: Manage clocks for the interconnect target module in all cases Tony Lindgren
2019-03-25 21:58 ` [PATCH 09/14] bus: ti-sysc: Move rstctrl reset to happen later Tony Lindgren
2019-03-26 23:13   ` Tony Lindgren
2019-03-26 23:22     ` Suman Anna
2019-03-26 23:40       ` Tony Lindgren
2019-03-27 16:27         ` Suman Anna
2019-03-27 18:37           ` Tony Lindgren
2019-03-25 21:58 ` [PATCH 10/14] bus: ti-sysc: Add support for early quirks based on register address Tony Lindgren
2019-03-25 21:58 ` [PATCH 11/14] bus: ti-sysc: Add quirk handling for external optional functional clock Tony Lindgren
2019-04-08 16:51   ` Tony Lindgren [this message]
2019-03-25 21:58 ` [PATCH 12/14] bus: ti-sysc: Pass clockactivity quirk to platform functions Tony Lindgren
2019-03-25 21:58 ` [PATCH 13/14] bus: ti-sysc: Handle swsup idle mode quirks Tony Lindgren
2019-03-25 21:58 ` [PATCH 14/14] bus: ti-sysc: Detect DMIC for debugging Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190408165120.GJ49658@atomide.com \
    --to=tony@atomide.com \
    --cc=d-gerlach@ti.com \
    --cc=faiz_abbas@ti.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=j-keerthy@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=peter.ujfalusi@ti.com \
    --cc=rogerq@ti.com \
    --cc=t-kristo@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).