From: "Z.q. Hou" <zhiqiang.hou@nxp.com>
To: "linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"bhelgaas@google.com" <bhelgaas@google.com>,
"robh+dt@kernel.org" <robh+dt@kernel.org>,
"mark.rutland@arm.com" <mark.rutland@arm.com>,
"l.subrahmanya@mobiveil.co.in" <l.subrahmanya@mobiveil.co.in>,
"shawnguo@kernel.org" <shawnguo@kernel.org>,
Leo Li <leoyang.li@nxp.com>,
"lorenzo.pieralisi@arm.com" <lorenzo.pieralisi@arm.com>,
"catalin.marinas@arm.com" <catalin.marinas@arm.com>,
"will.deacon@arm.com" <will.deacon@arm.com>
Cc: "M.h. Lian" <minghuan.lian@nxp.com>,
"Z.q. Hou" <zhiqiang.hou@nxp.com>,
Xiaowei Bao <xiaowei.bao@nxp.com>,
Mingkai Hu <mingkai.hu@nxp.com>
Subject: [PATCHv5 09/20] PCI: mobiveil: Correct inbound/outbound window setup routines
Date: Fri, 12 Apr 2019 08:36:06 +0000 [thread overview]
Message-ID: <20190412083635.33626-10-Zhiqiang.Hou@nxp.com> (raw)
In-Reply-To: <20190412083635.33626-1-Zhiqiang.Hou@nxp.com>
From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Outbound window routine:
- Remove unused var definitions and register read operations.
- Add the upper 32-bit cpu address setup of the window.
- Instead of blindly write, only change the fields specified.
- Mask the lower bits of window size in case override the
control bits.
- Check if the passing window number is available, instead of
the total number of the initialized windows.
Inbound window routine:
- Add parameter 'u64 cpu_addr' to specify the cpu address
of the window instead of using 'pci_addr'.
- Change 'int pci_addr' to 'u64 pci_addr', and add setup
of the upper 32-bit PCI address of the window.
- Move the PCIe PIO master enablement to mobiveil_host_init().
- Instead of blindly write, only change the fields specified.
- Mask the lower bits of window size in case override the
control bits.
- Check if the passing window number is available, instead of
the total number of the initialized windows.
- And add the statistic of initialized inbound windows.
Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver")
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
---
V5:
- Corrected and retouched the subject and changelog.
drivers/pci/controller/pcie-mobiveil.c | 70 +++++++++++++++-----------
1 file changed, 42 insertions(+), 28 deletions(-)
diff --git a/drivers/pci/controller/pcie-mobiveil.c b/drivers/pci/controller/pcie-mobiveil.c
index e88afc792a5c..4ba458474e42 100644
--- a/drivers/pci/controller/pcie-mobiveil.c
+++ b/drivers/pci/controller/pcie-mobiveil.c
@@ -65,9 +65,13 @@
#define PAB_AXI_AMAP_CTRL(win) PAB_REG_ADDR(0x0ba0, win)
#define WIN_ENABLE_SHIFT 0
#define WIN_TYPE_SHIFT 1
+#define WIN_TYPE_MASK 0x3
+#define WIN_SIZE_SHIFT 10
+#define WIN_SIZE_MASK 0x3fffff
#define PAB_EXT_AXI_AMAP_SIZE(win) PAB_EXT_REG_ADDR(0xbaf0, win)
+#define PAB_EXT_AXI_AMAP_AXI_WIN(win) PAB_EXT_REG_ADDR(0x80a0, win)
#define PAB_AXI_AMAP_AXI_WIN(win) PAB_REG_ADDR(0x0ba4, win)
#define AXI_WINDOW_ALIGN_MASK 3
@@ -82,8 +86,10 @@
#define PAB_PEX_AMAP_CTRL(win) PAB_REG_ADDR(0x4ba0, win)
#define AMAP_CTRL_EN_SHIFT 0
#define AMAP_CTRL_TYPE_SHIFT 1
+#define AMAP_CTRL_TYPE_MASK 3
#define PAB_EXT_PEX_AMAP_SIZEN(win) PAB_EXT_REG_ADDR(0xbef0, win)
+#define PAB_EXT_PEX_AMAP_AXI_WIN(win) PAB_EXT_REG_ADDR(0xb4a0, win)
#define PAB_PEX_AMAP_AXI_WIN(win) PAB_REG_ADDR(0x4ba4, win)
#define PAB_PEX_AMAP_PEX_WIN_L(win) PAB_REG_ADDR(0x4ba8, win)
#define PAB_PEX_AMAP_PEX_WIN_H(win) PAB_REG_ADDR(0x4bac, win)
@@ -455,49 +461,51 @@ static int mobiveil_pcie_parse_dt(struct mobiveil_pcie *pcie)
}
static void program_ib_windows(struct mobiveil_pcie *pcie, int win_num,
- int pci_addr, u32 type, u64 size)
+ u64 cpu_addr, u64 pci_addr, u32 type, u64 size)
{
- int pio_ctrl_val;
- int amap_ctrl_dw;
+ u32 value;
u64 size64 = ~(size - 1);
- if ((pcie->ib_wins_configured + 1) > pcie->ppio_wins) {
+ if (win_num >= pcie->ppio_wins) {
dev_err(&pcie->pdev->dev,
"ERROR: max inbound windows reached !\n");
return;
}
- pio_ctrl_val = csr_readl(pcie, PAB_PEX_PIO_CTRL);
- pio_ctrl_val |= 1 << PIO_ENABLE_SHIFT;
- csr_writel(pcie, pio_ctrl_val, PAB_PEX_PIO_CTRL);
-
- amap_ctrl_dw = csr_readl(pcie, PAB_PEX_AMAP_CTRL(win_num));
- amap_ctrl_dw |= (type << AMAP_CTRL_TYPE_SHIFT) |
- (1 << AMAP_CTRL_EN_SHIFT) |
- lower_32_bits(size64);
- csr_writel(pcie, amap_ctrl_dw, PAB_PEX_AMAP_CTRL(win_num));
+ value = csr_readl(pcie, PAB_PEX_AMAP_CTRL(win_num));
+ value &= ~(AMAP_CTRL_TYPE_MASK << AMAP_CTRL_TYPE_SHIFT |
+ WIN_SIZE_MASK << WIN_SIZE_SHIFT);
+ value |= (type << AMAP_CTRL_TYPE_SHIFT) | (1 << AMAP_CTRL_EN_SHIFT) |
+ (lower_32_bits(size64) & WIN_SIZE_MASK << WIN_SIZE_SHIFT);
+ csr_writel(pcie, value, PAB_PEX_AMAP_CTRL(win_num));
csr_writel(pcie, upper_32_bits(size64),
PAB_EXT_PEX_AMAP_SIZEN(win_num));
- csr_writel(pcie, pci_addr, PAB_PEX_AMAP_AXI_WIN(win_num));
+ csr_writel(pcie, lower_32_bits(cpu_addr),
+ PAB_PEX_AMAP_AXI_WIN(win_num));
+ csr_writel(pcie, upper_32_bits(cpu_addr),
+ PAB_EXT_PEX_AMAP_AXI_WIN(win_num));
+
+ csr_writel(pcie, lower_32_bits(pci_addr),
+ PAB_PEX_AMAP_PEX_WIN_L(win_num));
+ csr_writel(pcie, upper_32_bits(pci_addr),
+ PAB_PEX_AMAP_PEX_WIN_H(win_num));
- csr_writel(pcie, pci_addr, PAB_PEX_AMAP_PEX_WIN_L(win_num));
- csr_writel(pcie, 0, PAB_PEX_AMAP_PEX_WIN_H(win_num));
+ pcie->ib_wins_configured++;
}
/*
* routine to program the outbound windows
*/
static void program_ob_windows(struct mobiveil_pcie *pcie, int win_num,
- u64 cpu_addr, u64 pci_addr,
- u32 config_io_bit, u64 size)
+ u64 cpu_addr, u64 pci_addr, u32 type, u64 size)
{
- u32 value, type;
+ u32 value;
u64 size64 = ~(size - 1);
- if ((pcie->ob_wins_configured + 1) > pcie->apio_wins) {
+ if (win_num >= pcie->apio_wins) {
dev_err(&pcie->pdev->dev,
"ERROR: max outbound windows reached !\n");
return;
@@ -507,10 +515,12 @@ static void program_ob_windows(struct mobiveil_pcie *pcie, int win_num,
* program Enable Bit to 1, Type Bit to (00) base 2, AXI Window Size Bit
* to 4 KB in PAB_AXI_AMAP_CTRL register
*/
- type = config_io_bit;
value = csr_readl(pcie, PAB_AXI_AMAP_CTRL(win_num));
- csr_writel(pcie, 1 << WIN_ENABLE_SHIFT | type << WIN_TYPE_SHIFT |
- lower_32_bits(size64), PAB_AXI_AMAP_CTRL(win_num));
+ value &= ~(WIN_TYPE_MASK << WIN_TYPE_SHIFT |
+ WIN_SIZE_MASK << WIN_SIZE_SHIFT);
+ value |= 1 << WIN_ENABLE_SHIFT | type << WIN_TYPE_SHIFT |
+ (lower_32_bits(size64) & WIN_SIZE_MASK << WIN_SIZE_SHIFT);
+ csr_writel(pcie, value, PAB_AXI_AMAP_CTRL(win_num));
csr_writel(pcie, upper_32_bits(size64), PAB_EXT_AXI_AMAP_SIZE(win_num));
@@ -518,11 +528,10 @@ static void program_ob_windows(struct mobiveil_pcie *pcie, int win_num,
* program AXI window base with appropriate value in
* PAB_AXI_AMAP_AXI_WIN0 register
*/
- value = csr_readl(pcie, PAB_AXI_AMAP_AXI_WIN(win_num));
- csr_writel(pcie, cpu_addr & (~AXI_WINDOW_ALIGN_MASK),
+ csr_writel(pcie, lower_32_bits(cpu_addr) & (~AXI_WINDOW_ALIGN_MASK),
PAB_AXI_AMAP_AXI_WIN(win_num));
-
- value = csr_readl(pcie, PAB_AXI_AMAP_PEX_WIN_H(win_num));
+ csr_writel(pcie, upper_32_bits(cpu_addr),
+ PAB_EXT_AXI_AMAP_AXI_WIN(win_num));
csr_writel(pcie, lower_32_bits(pci_addr),
PAB_AXI_AMAP_PEX_WIN_L(win_num));
@@ -604,6 +613,11 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
value |= APIO_EN_MASK;
csr_writel(pcie, value, PAB_AXI_PIO_CTRL);
+ /* Enable PCIe PIO master */
+ value = csr_readl(pcie, PAB_PEX_PIO_CTRL);
+ value |= 1 << PIO_ENABLE_SHIFT;
+ csr_writel(pcie, value, PAB_PEX_PIO_CTRL);
+
/*
* we'll program one outbound window for config reads and
* another default inbound window for all the upstream traffic
@@ -616,7 +630,7 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
CFG_WINDOW_TYPE, resource_size(pcie->ob_io_res));
/* memory inbound translation window */
- program_ib_windows(pcie, WIN_NUM_0, 0, MEM_WINDOW_TYPE, IB_WIN_SIZE);
+ program_ib_windows(pcie, WIN_NUM_0, 0, 0, MEM_WINDOW_TYPE, IB_WIN_SIZE);
/* Get the I/O and memory ranges from DT */
resource_list_for_each_entry(win, &pcie->resources) {
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-04-12 8:37 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-12 8:35 [PATCHv5 00/20] PCI: mobiveil: fixes for Mobiveil PCIe Host Bridge IP driver Z.q. Hou
2019-04-12 8:35 ` [PATCHv5 01/20] PCI: mobiveil: Unify register accessors Z.q. Hou
2019-04-12 8:35 ` [PATCHv5 02/20] PCI: mobiveil: Format the code without functionality change Z.q. Hou
2019-07-03 15:10 ` Lorenzo Pieralisi
2019-07-04 2:41 ` Z.q. Hou
2019-07-03 15:19 ` Lorenzo Pieralisi
2019-07-03 15:24 ` Lorenzo Pieralisi
2019-07-04 3:00 ` Z.q. Hou
2019-07-04 10:56 ` Lorenzo Pieralisi
2019-07-05 2:24 ` Z.q. Hou
2019-04-12 8:35 ` [PATCHv5 03/20] PCI: mobiveil: Correct the returned error number Z.q. Hou
2019-07-03 14:17 ` Lorenzo Pieralisi
2019-07-04 2:38 ` Z.q. Hou
2019-04-12 8:35 ` [PATCHv5 04/20] PCI: mobiveil: Remove the flag MSI_FLAG_MULTI_PCI_MSI Z.q. Hou
2019-06-11 16:59 ` Lorenzo Pieralisi
2019-06-11 17:29 ` Marc Zyngier
2019-06-12 10:54 ` Lorenzo Pieralisi
2019-06-12 11:22 ` Marc Zyngier
2019-06-12 11:34 ` Z.q. Hou
2019-06-12 13:08 ` Lorenzo Pieralisi
2019-06-15 1:30 ` Z.q. Hou
2019-06-17 9:33 ` Lorenzo Pieralisi
2019-06-17 10:34 ` Z.q. Hou
2019-06-28 11:35 ` Lorenzo Pieralisi
2019-07-01 10:07 ` Z.q. Hou
2019-04-12 8:35 ` [PATCHv5 05/20] PCI: mobiveil: Correct PCI base address in MEM/IO outbound windows Z.q. Hou
2019-04-12 8:35 ` [PATCHv5 06/20] PCI: mobiveil: Replace the resource list iteration function Z.q. Hou
2019-04-12 8:35 ` [PATCHv5 07/20] PCI: mobiveil: Use WIN_NUM_0 explicitly for CFG outbound window Z.q. Hou
2019-06-12 15:13 ` Lorenzo Pieralisi
2019-04-12 8:36 ` [PATCHv5 08/20] PCI: mobiveil: Use the 1st inbound window for MEM inbound transactions Z.q. Hou
2019-06-28 16:02 ` Lorenzo Pieralisi
2019-07-01 10:18 ` Z.q. Hou
2019-04-12 8:36 ` Z.q. Hou [this message]
2019-06-28 16:41 ` [PATCHv5 09/20] PCI: mobiveil: Correct inbound/outbound window setup routines Lorenzo Pieralisi
2019-07-01 10:24 ` Z.q. Hou
2019-04-12 8:36 ` [PATCHv5 10/20] PCI: mobiveil: Fix the INTx process errors Z.q. Hou
2019-06-12 15:08 ` Lorenzo Pieralisi
2019-06-14 7:08 ` Karthikeyan Mitran
2019-06-14 10:43 ` Lorenzo Pieralisi
2019-06-19 5:28 ` Karthikeyan Mitran
2019-06-19 7:24 ` Z.q. Hou
2019-06-28 17:05 ` Lorenzo Pieralisi
2019-07-01 10:27 ` Z.q. Hou
2019-04-12 8:36 ` [PATCHv5 11/20] PCI: mobiveil: Correct the fixup of Class Code field Z.q. Hou
2019-04-12 8:36 ` [PATCHv5 12/20] PCI: mobiveil: Move the link up waiting out of mobiveil_host_init() Z.q. Hou
2019-04-12 8:36 ` [PATCHv5 13/20] PCI: mobiveil: Move IRQ chained handler setup out of DT parse Z.q. Hou
2019-04-12 8:36 ` [PATCHv5 14/20] PCI: mobiveil: Initialize Primary/Secondary/Subordinate bus numbers Z.q. Hou
2019-04-12 8:36 ` [PATCHv5 15/20] PCI: mobiveil: Fix the checking of valid device Z.q. Hou
2019-04-12 8:36 ` [PATCHv5 16/20] PCI: mobiveil: Add link up condition check Z.q. Hou
2019-06-11 17:17 ` Lorenzo Pieralisi
2019-06-12 11:36 ` Z.q. Hou
2019-04-12 8:36 ` [PATCHv5 17/20] PCI: mobiveil: Complete initialization of host even if no PCIe link Z.q. Hou
2019-06-12 14:34 ` Lorenzo Pieralisi
2019-06-15 2:34 ` Z.q. Hou
2019-04-12 8:37 ` [PATCHv5 18/20] PCI: mobiveil: Disable IB and OB windows set by bootloader Z.q. Hou
2019-06-12 16:23 ` Lorenzo Pieralisi
2019-06-15 5:03 ` Z.q. Hou
2019-06-17 9:30 ` Lorenzo Pieralisi
2019-06-17 10:42 ` Z.q. Hou
2019-04-12 8:37 ` [PATCHv5 19/20] PCI: mobiveil: Add 8-bit and 16-bit register accessors Z.q. Hou
2019-06-12 13:54 ` Lorenzo Pieralisi
2019-06-15 1:13 ` Z.q. Hou
2019-06-17 9:29 ` Lorenzo Pieralisi
2019-06-17 10:16 ` Z.q. Hou
2019-04-12 8:37 ` [PATCHv5 20/20] dt-bindings: PCI: mobiveil: Change gpio_slave and apb_csr to optional Z.q. Hou
2019-07-03 10:33 ` [PATCHv5 00/20] PCI: mobiveil: fixes for Mobiveil PCIe Host Bridge IP driver Lorenzo Pieralisi
2019-07-04 2:36 ` Z.q. Hou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190412083635.33626-10-Zhiqiang.Hou@nxp.com \
--to=zhiqiang.hou@nxp.com \
--cc=bhelgaas@google.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=l.subrahmanya@mobiveil.co.in \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mark.rutland@arm.com \
--cc=minghuan.lian@nxp.com \
--cc=mingkai.hu@nxp.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=will.deacon@arm.com \
--cc=xiaowei.bao@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).