linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v9 0/3] Add support for the Purism Librem5 devkit
@ 2019-05-13 14:55 Angus Ainslie (Purism)
  2019-05-13 14:55 ` [PATCH v9 1/3] arm64: dts: fsl: librem5: Add a device tree for the " Angus Ainslie (Purism)
                   ` (2 more replies)
  0 siblings, 3 replies; 8+ messages in thread
From: Angus Ainslie (Purism) @ 2019-05-13 14:55 UTC (permalink / raw)
  To: angus.ainslie
  Cc: Mark Rutland, devicetree, Shawn Guo, Sascha Hauer,
	Angus Ainslie (Purism),
	linux-kernel, Rob Herring, NXP Linux Team,
	Pengutronix Kernel Team, Fabio Estevam, linux-arm-kernel

The Librem5 devkit is based on the imx8mq from NXP. This is a default
devicetree to boot the board to a command prompt.

Changes since v8:

Fixed license comment.
Changed regulators to all lower case.
Changed clock frequency for NXP errata e7805.
Dropped blank line.

Changes since v7:

More regulators always on for USB.
Add vbus regulator.
Drop vbat regulator.
Replace legacy "gpio-key,wakeup" with "wakeup-source".
Add vbus-supply to get rid of warning
imx8mq-usb-phy 382f0040.usb-phy: 382f0040.usb-phy supply vbus not found, using dummy regulator

Changes since v6:

Dropped unused regulators.
Fix regulator phandles case.
Dropped extra whitespace.

Changes since v5:

Added reviewed-by tags.
Moved USB port links to USB controller node.

Changes since v4:

Compiled against linux-next next-20190415.
Added imx8mq to the arm yaml file.
Re-arrange regulator nodes to drop undefined supplies.
Additional ordering for aesthetics.
Split some long lines.
Added lots of blank lines.
Moved pinctl muxes to where they are used.
Cleaned out reg defintions from regulator nodes.

Changes since v3:

Freshly sorted and pressed nodes.
Change the backlight to an interpolated scale.
Dropped i2c2.
Dropped devkit version number to match debian MR.

Changes since v2:

Fixed incorrect phy-supply for the fsl-fec.
Dropped unused regulator property.
Fixup Makefile for linux-next.

Changes since v1:

Dropped config file.
Updated the board compatible label.
Changed node names to follow naming conventions.
Added a more complete regulator hierachy.
Removed unused nodes.
Removed unknown devices.
Fixed comment style.
Dropped undocumented properties.

Angus Ainslie (Purism) (3):
  arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit
  dt-bindings: Add an entry for Purism SPC
  dt-bindings: arm: fsl: Add the imx8mq boards

 .../devicetree/bindings/arm/fsl.yaml          |   7 +
 .../devicetree/bindings/vendor-prefixes.txt   |   1 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx8mq-librem5-devkit.dts   | 821 ++++++++++++++++++
 4 files changed, 830 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2019-05-22  8:30 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-13 14:55 [PATCH v9 0/3] Add support for the Purism Librem5 devkit Angus Ainslie (Purism)
2019-05-13 14:55 ` [PATCH v9 1/3] arm64: dts: fsl: librem5: Add a device tree for the " Angus Ainslie (Purism)
2019-05-13 15:11   ` Joe Perches
2019-05-13 15:35     ` Angus Ainslie
2019-05-13 16:05       ` Joe Perches
2019-05-22  8:29         ` Shawn Guo
2019-05-13 14:55 ` [PATCH v9 2/3] dt-bindings: Add an entry for Purism SPC Angus Ainslie (Purism)
2019-05-13 14:55 ` [PATCH v9 3/3] dt-bindings: arm: fsl: Add the imx8mq boards Angus Ainslie (Purism)

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).