From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: linux-amlogic@lists.infradead.org, linux-pwm@vger.kernel.org,
thierry.reding@gmail.com, u.kleine-koenig@pengutronix.de
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 08/14] pwm: meson: add the per-channel register offsets and bits in a struct
Date: Sat, 25 May 2019 20:11:27 +0200 [thread overview]
Message-ID: <20190525181133.4875-9-martin.blumenstingl@googlemail.com> (raw)
In-Reply-To: <20190525181133.4875-1-martin.blumenstingl@googlemail.com>
Introduce struct meson_pwm_channel_data which contains the per-channel
offsets for the PWM register and REG_MISC_AB bits. Replace the existing
switch (pwm->hwpwm) statements with an access to the new struct.
This simplifies the code and will make it easier to implement
pwm_ops.get_state() because the switch-case which all per-channel
registers and offsets (as previously implemented in meson_pwm_enable())
doesn't have to be duplicated.
No functional changes intended.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
drivers/pwm/pwm-meson.c | 92 ++++++++++++++++-------------------------
1 file changed, 35 insertions(+), 57 deletions(-)
diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index d1718f54ecec..ac7e188155fd 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -39,9 +39,27 @@
#define MESON_NUM_PWMS 2
-static const unsigned int mux_reg_shifts[] = {
- MISC_A_CLK_SEL_SHIFT,
- MISC_B_CLK_SEL_SHIFT
+static struct meson_pwm_channel_data {
+ u8 reg_offset;
+ u8 clk_sel_shift;
+ u8 clk_div_shift;
+ u32 clk_en_mask;
+ u32 pwm_en_mask;
+} meson_pwm_per_channel_data[MESON_NUM_PWMS] = {
+ {
+ .reg_offset = REG_PWM_A,
+ .clk_sel_shift = MISC_A_CLK_SEL_SHIFT,
+ .clk_div_shift = MISC_A_CLK_DIV_SHIFT,
+ .clk_en_mask = MISC_A_CLK_EN,
+ .pwm_en_mask = MISC_A_EN,
+ },
+ {
+ .reg_offset = REG_PWM_B,
+ .clk_sel_shift = MISC_B_CLK_SEL_SHIFT,
+ .clk_div_shift = MISC_B_CLK_DIV_SHIFT,
+ .clk_en_mask = MISC_B_CLK_EN,
+ .pwm_en_mask = MISC_B_EN,
+ }
};
struct meson_pwm_channel {
@@ -194,43 +212,26 @@ static int meson_pwm_calc(struct meson_pwm *meson, struct pwm_device *pwm,
static void meson_pwm_enable(struct meson_pwm *meson, struct pwm_device *pwm)
{
struct meson_pwm_channel *channel = pwm_get_chip_data(pwm);
- u32 value, clk_shift, clk_enable, enable;
- unsigned int offset;
+ struct meson_pwm_channel_data *channel_data;
unsigned long flags;
+ u32 value;
- switch (pwm->hwpwm) {
- case 0:
- clk_shift = MISC_A_CLK_DIV_SHIFT;
- clk_enable = MISC_A_CLK_EN;
- enable = MISC_A_EN;
- offset = REG_PWM_A;
- break;
-
- case 1:
- clk_shift = MISC_B_CLK_DIV_SHIFT;
- clk_enable = MISC_B_CLK_EN;
- enable = MISC_B_EN;
- offset = REG_PWM_B;
- break;
-
- default:
- return;
- }
+ channel_data = &meson_pwm_per_channel_data[pwm->hwpwm];
spin_lock_irqsave(&meson->lock, flags);
value = readl(meson->base + REG_MISC_AB);
- value &= ~(MISC_CLK_DIV_MASK << clk_shift);
- value |= channel->pre_div << clk_shift;
- value |= clk_enable;
+ value &= ~(MISC_CLK_DIV_MASK << channel_data->clk_div_shift);
+ value |= channel->pre_div << channel_data->clk_div_shift;
+ value |= channel_data->clk_en_mask;
writel(value, meson->base + REG_MISC_AB);
value = FIELD_PREP(PWM_HIGH_MASK, channel->hi) |
FIELD_PREP(PWM_LOW_MASK, channel->lo);
- writel(value, meson->base + offset);
+ writel(value, meson->base + channel_data->reg_offset);
value = readl(meson->base + REG_MISC_AB);
- value |= enable;
+ value |= channel_data->pwm_en_mask;
writel(value, meson->base + REG_MISC_AB);
spin_unlock_irqrestore(&meson->lock, flags);
@@ -238,26 +239,13 @@ static void meson_pwm_enable(struct meson_pwm *meson, struct pwm_device *pwm)
static void meson_pwm_disable(struct meson_pwm *meson, struct pwm_device *pwm)
{
- u32 value, enable;
unsigned long flags;
-
- switch (pwm->hwpwm) {
- case 0:
- enable = MISC_A_EN;
- break;
-
- case 1:
- enable = MISC_B_EN;
- break;
-
- default:
- return;
- }
+ u32 value;
spin_lock_irqsave(&meson->lock, flags);
value = readl(meson->base + REG_MISC_AB);
- value &= ~enable;
+ value &= ~meson_pwm_per_channel_data[pwm->hwpwm].pwm_en_mask;
writel(value, meson->base + REG_MISC_AB);
spin_unlock_irqrestore(&meson->lock, flags);
@@ -309,18 +297,7 @@ static void meson_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
if (!state)
return;
- switch (pwm->hwpwm) {
- case 0:
- mask = MISC_A_EN;
- break;
-
- case 1:
- mask = MISC_B_EN;
- break;
-
- default:
- return;
- }
+ mask = meson_pwm_per_channel_data[pwm->hwpwm].pwm_en_mask;
value = readl(meson->base + REG_MISC_AB);
state->enabled = (value & mask) != 0;
@@ -458,7 +435,8 @@ static int meson_pwm_init_channels(struct meson_pwm *meson)
init.num_parents = meson->data->num_parents;
channel->mux.reg = meson->base + REG_MISC_AB;
- channel->mux.shift = mux_reg_shifts[i];
+ channel->mux.shift =
+ meson_pwm_per_channel_data[i].clk_sel_shift;
channel->mux.mask = MISC_CLK_SEL_MASK;
channel->mux.flags = 0;
channel->mux.lock = &meson->lock;
@@ -509,7 +487,7 @@ static int meson_pwm_probe(struct platform_device *pdev)
meson->chip.dev = &pdev->dev;
meson->chip.ops = &meson_pwm_ops;
meson->chip.base = -1;
- meson->chip.npwm = MESON_NUM_PWM;
+ meson->chip.npwm = MESON_NUM_PWMS;
meson->chip.of_xlate = of_pwm_xlate_with_flags;
meson->chip.of_pwm_n_cells = 3;
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-05-25 18:13 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-25 18:11 [PATCH 00/14] pwm-meson: cleanups and improvements Martin Blumenstingl
2019-05-25 18:11 ` [PATCH 01/14] pwm: meson: unify the parameter list of meson_pwm_{enable, disable} Martin Blumenstingl
2019-05-27 12:25 ` Neil Armstrong
2019-05-25 18:11 ` [PATCH 02/14] pwm: meson: use devm_clk_get_optional() to get the input clock Martin Blumenstingl
2019-05-27 12:25 ` Neil Armstrong
2019-05-25 18:11 ` [PATCH 03/14] pwm: meson: use GENMASK and FIELD_PREP for the lo and hi values Martin Blumenstingl
2019-05-27 12:25 ` Neil Armstrong
2019-05-25 18:11 ` [PATCH 04/14] pwm: meson: change MISC_CLK_SEL_WIDTH to MISC_CLK_SEL_MASK Martin Blumenstingl
2019-05-27 12:26 ` Neil Armstrong
2019-05-27 17:46 ` Martin Blumenstingl
2019-05-27 18:00 ` Uwe Kleine-König
2019-05-28 18:04 ` Martin Blumenstingl
2019-05-25 18:11 ` [PATCH 05/14] pwm: meson: don't duplicate the polarity internally Martin Blumenstingl
2019-05-27 12:26 ` Neil Armstrong
2019-05-25 18:11 ` [PATCH 06/14] pwm: meson: pass struct pwm_device to meson_pwm_calc() Martin Blumenstingl
2019-05-27 12:27 ` Neil Armstrong
2019-05-25 18:11 ` [PATCH 07/14] pwm: meson: add the meson_pwm_channel data to struct meson_pwm Martin Blumenstingl
2019-05-27 12:27 ` Neil Armstrong
2019-05-27 17:52 ` Martin Blumenstingl
2019-05-25 18:11 ` Martin Blumenstingl [this message]
2019-05-27 12:28 ` [PATCH 08/14] pwm: meson: add the per-channel register offsets and bits in a struct Neil Armstrong
2019-05-27 17:57 ` Martin Blumenstingl
2019-05-28 8:11 ` Neil Armstrong
2019-05-25 18:11 ` [PATCH 09/14] pwm: meson: move pwm_set_chip_data() to meson_pwm_request() Martin Blumenstingl
2019-05-27 12:30 ` Neil Armstrong
2019-05-25 18:11 ` [PATCH 10/14] pwm: meson: simplify the calculation of the pre-divider and count Martin Blumenstingl
2019-05-26 19:41 ` Uwe Kleine-König
2019-05-27 12:37 ` Neil Armstrong
2019-05-25 18:11 ` [PATCH 11/14] pwm: meson: read the full hardware state in meson_pwm_get_state() Martin Blumenstingl
2019-05-27 12:31 ` Neil Armstrong
2019-05-25 18:11 ` [PATCH 12/14] pwm: meson: don't cache struct pwm_state internally Martin Blumenstingl
2019-05-27 12:31 ` Neil Armstrong
2019-05-25 18:11 ` [PATCH 13/14] pwm: meson: add support PWM_POLARITY_INVERSED when disabling Martin Blumenstingl
2019-05-27 12:33 ` Neil Armstrong
2019-05-27 17:50 ` Martin Blumenstingl
2019-05-25 18:11 ` [PATCH 14/14] pwm: meson: add documentation to the driver Martin Blumenstingl
2019-05-27 12:33 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190525181133.4875-9-martin.blumenstingl@googlemail.com \
--to=martin.blumenstingl@googlemail.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).