From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-8.8 required=3.0 tests=DKIM_ADSP_CUSTOM_MED, DKIM_SIGNED,DKIM_VALID,FREEMAIL_FORGED_FROMDOMAIN,FREEMAIL_FROM, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY, SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 2D6ADC07542 for ; Sat, 25 May 2019 18:17:30 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id EF82120815 for ; Sat, 25 May 2019 18:17:29 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="fiI1NzJs"; dkim=fail reason="signature verification failed" (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="A339eY7b" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org EF82120815 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=gmail.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+infradead-linux-arm-kernel=archiver.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:MIME-Version:Cc:List-Subscribe: List-Help:List-Post:List-Archive:List-Unsubscribe:List-Id:References: In-Reply-To:Message-Id:Date:Subject:To:From:Reply-To:Content-ID: Content-Description:Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc :Resent-Message-ID:List-Owner; bh=JsZ1/Q4L5G+MWjkfFUHMAA/7g1LypUXEHAJFCRT0SHo=; b=fiI1NzJsLXR5SWjC2Cw4r91J8C Ceph6maPtzxTFyo+Iisa0zua/h69h209JSAS1ofMs9+2EwQ8UhWH2gL41HGrs4iLqn9p8IEmx+oR2 ixARw7QQhzQMkSQP1OLYiLHnw6P4gAMlD4rrI4OyM0tnM0wPPEhIfI1zUUQHsdfUeeoX5UXEH/ugm UxmGTpvWzrZJW2qoSMdrGdw6gdBJRJCEFZbHTZWz/xkzf3hKDwt/s9mtz84Urygs66a5GUJ8NZ28Z T+yulpOb1RgDz/7Xa0+CttHDe7c/02SalOCM5+n2kr51hHNgxE0+yNZ6f0DvmARutz8vSx6R8VzIP jB/cElcw==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.90_1 #2 (Red Hat Linux)) id 1hUbBq-0005Jl-Um; Sat, 25 May 2019 18:14:42 +0000 Received: from mail-pf1-x444.google.com ([2607:f8b0:4864:20::444]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1hUbAm-0004Lx-3I for linux-arm-kernel@lists.infradead.org; Sat, 25 May 2019 18:13:43 +0000 Received: by mail-pf1-x444.google.com with SMTP id d126so5013820pfd.2 for ; Sat, 25 May 2019 11:13:35 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=TBYBYBJRinIndW3feN0QlKthGu6jDN89/Qjy9roHMcw=; b=A339eY7bCLexXVnkZlLZ3sfWCRU1QfuGi15dk096SzbcHhwN8lZ2q6E+Ls6OL1ahQf rb63D6hu0xJ28ZSsPYdSSUOL9YmXcWBYXOtWsxPP0oblkXxE6RZvonLgzktL/yKAcTAk fdBHV17OE3TzfFHoN6iIsFVGgqwkQaWuEcsskfXWvv5QRLhW0GDT1xZnmLP5Oahmm2HC L6Skt8Hht3plboZ/bTiiohraK06/Nyl/3mftlz8tS7TMNoa/iPr5HsACykwHGhSJdklf xTreCX/S+Axo2hKgUPu6yCWRYwKSgHxeWdZCkwW+rAaj+f9Ti1MSQxW9LzD/p4XB2IzE wUpA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=TBYBYBJRinIndW3feN0QlKthGu6jDN89/Qjy9roHMcw=; b=ZtZb6HLEeo6mILy5airLhfr1MHsBzBEK8HOcpW1JL84V265d2BGqtD2LrKdIx21QT3 kdQJzNB7crEEkttcgl78OwaJftWvIsZNiXV3GhDkdx1jJr2F3AhOLhSBouVc2TTF+XNw POi7VFbpGaT+aLTv1yCMs0qyt8gmHgL0yOWQnjik23wgSTjZ/dryOANsC/Rqq67mNZ+M i977cbRp1AAtmBgJiCcu379U6l82jRu/TF3Iq/1nCINhqwXCwLvkIqUauFGnCPOclBUt uZV3H8HtsV7BDcJ6P4LRLsWN4GGsBQNSYtrOO06FxEjWHHC7oGGQSMi2SQSoch0Hm0pE 2C3Q== X-Gm-Message-State: APjAAAV/NLARwhW7bWCF6wWIgBlE9Nn9EsSp4m3D1xqw9THxIshUgJJx 4P6ZhWwihnj08Ax2RHy4d7Y= X-Google-Smtp-Source: APXvYqzyKRxMRw4Kd/k40QbALYxN90+IJ9eDcxW0V6aCteRflB6pLw5VyJPwXXEoCDoKbW+4Npdz7w== X-Received: by 2002:a63:c64a:: with SMTP id x10mr112244740pgg.195.1558808014553; Sat, 25 May 2019 11:13:34 -0700 (PDT) Received: from localhost (68.168.130.77.16clouds.com. [68.168.130.77]) by smtp.gmail.com with ESMTPSA id n127sm5707044pga.57.2019.05.25.11.13.33 (version=TLS1_2 cipher=ECDHE-RSA-CHACHA20-POLY1305 bits=256/256); Sat, 25 May 2019 11:13:34 -0700 (PDT) From: Yangtao Li To: rui.zhang@intel.com, edubezval@gmail.com, daniel.lezcano@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com, maxime.ripard@bootlin.com, wens@csie.org, davem@davemloft.net, mchehab+samsung@kernel.org, gregkh@linuxfoundation.org, linus.walleij@linaro.org, nicolas.ferre@microchip.com, paulmck@linux.ibm.com Subject: [PATCH v3 1/3] thermal: sun8i: add thermal driver for h6 Date: Sat, 25 May 2019 14:13:27 -0400 Message-Id: <20190525181329.18657-2-tiny.windzz@gmail.com> X-Mailer: git-send-email 2.17.0 In-Reply-To: <20190525181329.18657-1-tiny.windzz@gmail.com> References: <20190525181329.18657-1-tiny.windzz@gmail.com> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20190525_111336_167635_99EA6C9C X-CRM114-Status: GOOD ( 29.39 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Yangtao Li , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+infradead-linux-arm-kernel=archiver.kernel.org@lists.infradead.org This patch adds the support for allwinner thermal sensor, within allwinner SoC. It will register sensors for thermal framework and use device tree to bind cooling device. Signed-off-by: Yangtao Li --- MAINTAINERS | 7 + drivers/thermal/Kconfig | 14 + drivers/thermal/Makefile | 1 + drivers/thermal/sun8i_thermal.c | 437 ++++++++++++++++++++++++++++++++ 4 files changed, 459 insertions(+) create mode 100644 drivers/thermal/sun8i_thermal.c diff --git a/MAINTAINERS b/MAINTAINERS index 2336dd26ece4..d312f9eecf0d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -674,6 +674,13 @@ L: linux-crypto@vger.kernel.org S: Maintained F: drivers/crypto/sunxi-ss/ +ALLWINNER THERMAL DRIVER +M: Yangtao Li +L: linux-pm@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml +F: drivers/thermal/sun8i_thermal.c + ALLWINNER VPU DRIVER M: Maxime Ripard M: Paul Kocialkowski diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 9966364a6deb..e5465053d66f 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -262,6 +262,20 @@ config SPEAR_THERMAL Enable this to plug the SPEAr thermal sensor driver into the Linux thermal framework. +config SUN8I_THERMAL + tristate "Allwinner sun8i thermal driver" + depends on ARCH_SUNXI || COMPILE_TEST + depends on HAS_IOMEM + depends on NVMEM_SUNXI_SID + depends on OF + depends on RESET_CONTROLLER + help + Support for the sun8i thermal sensor driver into the Linux thermal + framework. + + To compile this driver as a module, choose M here: the + module will be called sun8i-thermal. + config ROCKCHIP_THERMAL tristate "Rockchip thermal driver" depends on ARCH_ROCKCHIP || COMPILE_TEST diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 74a37c7f847a..fa6f8b206281 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -31,6 +31,7 @@ thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o obj-y += broadcom/ obj-$(CONFIG_THERMAL_MMIO) += thermal_mmio.o obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o +obj-$(CONFIG_SUN8I_THERMAL) += sun8i_thermal.o obj-$(CONFIG_ROCKCHIP_THERMAL) += rockchip_thermal.o obj-$(CONFIG_RCAR_THERMAL) += rcar_thermal.o obj-$(CONFIG_RCAR_GEN3_THERMAL) += rcar_gen3_thermal.o diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c new file mode 100644 index 000000000000..a9cc2197f4cb --- /dev/null +++ b/drivers/thermal/sun8i_thermal.c @@ -0,0 +1,437 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Thermal sensor driver for Allwinner SOC + * Copyright (C) 2019 Yangtao Li + * + * Based on the work of Icenowy Zheng + * Based on the work of Ondrej Jirman + * Based on the work of Josef Gajdusek + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAX_SENSOR_NUM 4 + +#define FT_TEMP_MASK GENMASK(11, 0) +#define TEMP_CALIB_MASK GENMASK(11, 0) +#define TEMP_TO_REG 672 +#define CALIBRATE_DEFAULT 0x800 + +#define SUN50I_THS_CTRL0 0x00 +#define SUN50I_H6_THS_ENABLE 0x04 +#define SUN50I_H6_THS_PC 0x08 +#define SUN50I_H6_THS_DIC 0x10 +#define SUN50I_H6_THS_DIS 0x20 +#define SUN50I_H6_THS_MFC 0x30 +#define SUN50I_H6_THS_TEMP_CALIB 0xa0 +#define SUN50I_H6_THS_TEMP_DATA 0xc0 + +#define SUN50I_THS_CTRL0_T_ACQ(x) ((GENMASK(15, 0) & (x)) << 16) +#define SUN50I_THS_FILTER_EN BIT(2) +#define SUN50I_THS_FILTER_TYPE(x) (GENMASK(1, 0) & (x)) +#define SUN50I_H6_THS_PC_TEMP_PERIOD(x) ((GENMASK(19, 0) & (x)) << 12) +#define SUN50I_H6_THS_DATA_IRQ_STS(x) BIT(x) + +/* millidegree celsius */ +#define SUN50I_H6_FT_DEVIATION 7000 + +struct ths_device; + +struct tsensor { + struct ths_device *tmdev; + struct thermal_zone_device *tzd; + int id; + wait_queue_head_t wait_queue; +}; + +struct ths_thermal_chip { + int sensor_num; + int offset; + int scale; + int ft_deviation; + int temp_calib_base; + int temp_data_base; + int (*calibrate)(struct ths_device *tmdev); + int (*init)(struct ths_device *tmdev); + irqreturn_t (*irq_thread)(int irq, void *data); +}; + +struct ths_device { + const struct ths_thermal_chip *chip; + struct device *dev; + struct regmap *regmap; + struct reset_control *reset; + struct clk *bus_clk; + struct tsensor sensor[MAX_SENSOR_NUM]; + int data_ready; +}; + +/* Temp Unit: millidegree Celsius */ +static int sun8i_ths_reg2temp(struct ths_device *tmdev, + int reg) +{ + return (reg + tmdev->chip->offset) * tmdev->chip->scale; +} + +static int sun8i_ths_get_temp(void *data, int *temp) +{ + struct tsensor *s = data; + struct ths_device *tmdev = s->tmdev; + int val; + + wait_event(s->wait_queue, tmdev->data_ready & BIT(s->id)); + tmdev->data_ready &= ~BIT(s->id); + + regmap_read(tmdev->regmap, tmdev->chip->temp_data_base + + 0x4 * s->id, &val); + + *temp = sun8i_ths_reg2temp(tmdev, val); + /* + * XX - According to the original sdk, there are some platforms(rarely) + * that add a fixed offset value after calculating the temperature + * value. We can't simply put it on the formula for calculating the + * temperature above, because the formula for calculating the + * temperature above is also used when the sensor is calibrated. If + * do this, the correct calibration formula is hard to know. + */ + if (tmdev->chip->ft_deviation) + *temp += tmdev->chip->ft_deviation; + + return 0; +} + +static const struct thermal_zone_of_device_ops ths_ops = { + .get_temp = sun8i_ths_get_temp, +}; + +static const struct regmap_config config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .fast_io = true, +}; + +static irqreturn_t sun50i_h6_irq_thread(int irq, void *data) +{ + wait_queue_head_t *data_wait; + struct ths_device *tmdev = data; + int i, state; + + regmap_read(tmdev->regmap, SUN50I_H6_THS_DIS, &state); + + for (i = 0; i < tmdev->chip->sensor_num; i++) { + data_wait = &tmdev->sensor[i].wait_queue; + + if (state & SUN50I_H6_THS_DATA_IRQ_STS(i)) { + /* clear data irq pending */ + regmap_write(tmdev->regmap, SUN50I_H6_THS_DIS, + SUN50I_H6_THS_DATA_IRQ_STS(i)); + + tmdev->data_ready |= BIT(i); + wake_up(data_wait); + } + } + + return IRQ_HANDLED; +} + +static int sun8i_ths_resource_init(struct ths_device *tmdev) +{ + struct device *dev = tmdev->dev; + struct platform_device *pdev = to_platform_device(dev); + struct resource *mem; + void __iomem *base; + int ret, irq; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, mem); + if (IS_ERR(base)) + return PTR_ERR(base); + + tmdev->regmap = devm_regmap_init_mmio(dev, base, &config); + if (IS_ERR(tmdev->regmap)) + return PTR_ERR(tmdev->regmap); + + tmdev->reset = devm_reset_control_get(dev, 0); + if (IS_ERR(tmdev->reset)) + return PTR_ERR(tmdev->reset); + + tmdev->bus_clk = devm_clk_get(&pdev->dev, "bus"); + if (IS_ERR(tmdev->bus_clk)) + return PTR_ERR(tmdev->bus_clk); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + ret = devm_request_threaded_irq(dev, irq, NULL, + tmdev->chip->irq_thread, + IRQF_ONESHOT, "ths", tmdev); + if (ret) + return ret; + + ret = reset_control_deassert(tmdev->reset); + if (ret) + return ret; + + ret = clk_prepare_enable(tmdev->bus_clk); + if (ret) + goto assert_reset; + + ret = tmdev->chip->calibrate(tmdev); + if (ret) + goto bus_disable; + + return 0; + +bus_disable: + clk_disable_unprepare(tmdev->bus_clk); +assert_reset: + reset_control_assert(tmdev->reset); + + return ret; +} + +static int sun50i_ths_calibrate(struct ths_device *tmdev) +{ + struct nvmem_cell *calcell; + struct device *dev = tmdev->dev; + u16 *caldata; + size_t callen; + int ft_temp; + int i, ret = 0; + + calcell = devm_nvmem_cell_get(dev, "calib"); + if (IS_ERR(calcell)) { + if (PTR_ERR(calcell) == -EPROBE_DEFER) + return -EPROBE_DEFER; + /* + * Even if the external calibration data stored in sid is + * not accessible, the THS hardware can still work, although + * the data won't be so accurate. + * + * The default value of calibration register is 0x800 for + * every sensor, and the calibration value is usually 0x7xx + * or 0x8xx, so they won't be away from the default value + * for a lot. + * + * So here we do not return error if the calibartion data is + * not available, except the probe needs deferring. + */ + goto out; + } + + caldata = nvmem_cell_read(calcell, &callen); + if (IS_ERR(caldata)) { + ret = PTR_ERR(caldata); + goto out; + } + + if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num) { + ret = -EINVAL; + goto out_free; + } + + /* + * efuse layout: + * + * 0 11 16 32 + * +-------+-------+-------+ + * |temp| |sensor0|sensor1| + * +-------+-------+-------+ + * + * The calibration data on the H6 is the ambient temperature and + * sensor values that are filled during the factory test stage. + * + * The unit of stored FT temperature is 0.1 degreee celusis. + * Through the stored ambient temperature and the data read + * by the sensor, after a certain calculation, the calibration + * value to be compensated can be obtained. + */ + ft_temp = caldata[0] & FT_TEMP_MASK; + + for (i = 0; i < tmdev->chip->sensor_num; i++) { + int reg = (int)caldata[i + 1]; + int sensor_temp = sun8i_ths_reg2temp(tmdev, reg); + int delta, cdata, calib_offest; + + /* + * To calculate the calibration value: + * + * X(in Celsius) = Ts - ft_temp + * delta = X * 10000 / TEMP_TO_REG + * cdata = CALIBRATE_DEFAULT - delta + * + * cdata: calibration value + */ + delta = (sensor_temp - ft_temp * 100) * 10 / TEMP_TO_REG; + cdata = CALIBRATE_DEFAULT - delta; + if (cdata & ~TEMP_CALIB_MASK) { + /* + * Calibration value more than 12-bit, but calibration + * register is 12-bit. In this case, ths hardware can + * still work without calibration, although the data + * won't be so accurate. + */ + dev_warn(dev, "sensor%d is not calibrated.\n", i); + + continue; + } + + calib_offest = tmdev->chip->temp_calib_base + (i / 2) * 0x4; + + if (i % 2) { + int val; + + regmap_read(tmdev->regmap, calib_offest, &val); + val = (val & TEMP_CALIB_MASK) | (cdata << 16); + regmap_write(tmdev->regmap, calib_offest, val); + } else { + regmap_write(tmdev->regmap, calib_offest, cdata); + } + } + +out_free: + kfree(caldata); +out: + return ret; +} + +static int sun8i_ths_register(struct ths_device *tmdev) +{ + struct thermal_zone_device *tzd; + int i; + + for (i = 0; i < tmdev->chip->sensor_num; i++) { + tmdev->sensor[i].tmdev = tmdev; + tmdev->sensor[i].id = i; + tmdev->sensor[i].tzd = + devm_thermal_zone_of_sensor_register(tmdev->dev, + i, + &tmdev->sensor[i], + &ths_ops); + if (IS_ERR(tmdev->sensor[i].tzd)) + return PTR_ERR(tzd); + } + + return 0; +} + +static int sun8i_ths_probe(struct platform_device *pdev) +{ + struct ths_device *tmdev; + struct device *dev = &pdev->dev; + int i, ret; + + tmdev = devm_kzalloc(dev, sizeof(*tmdev), GFP_KERNEL); + if (!tmdev) + return -ENOMEM; + + tmdev->dev = dev; + tmdev->chip = of_device_get_match_data(&pdev->dev); + if (!tmdev->chip) + return -EINVAL; + + /* + * Initialize wait_queue in advance, to avoid calling wake_up + * before ths is registered in isr. + */ + for (i = 0; i < tmdev->chip->sensor_num; i++) + init_waitqueue_head(&tmdev->sensor[i].wait_queue); + + platform_set_drvdata(pdev, tmdev); + + ret = sun8i_ths_resource_init(tmdev); + if (ret) + return ret; + + ret = tmdev->chip->init(tmdev); + if (ret) + return ret; + + ret = sun8i_ths_register(tmdev); + if (ret) + return ret; + + return ret; +} + +static int sun8i_ths_remove(struct platform_device *pdev) +{ + struct ths_device *tmdev = platform_get_drvdata(pdev); + + clk_disable_unprepare(tmdev->bus_clk); + reset_control_assert(tmdev->reset); + + return 0; +} + +static int sun50i_thermal_init(struct ths_device *tmdev) +{ + int val; + + /* + * clkin = 24MHz + * T acquire = clkin / (x + 1) + * = 20us + */ + regmap_write(tmdev->regmap, SUN50I_THS_CTRL0, + SUN50I_THS_CTRL0_T_ACQ(479)); + /* average over 4 samples */ + regmap_write(tmdev->regmap, SUN50I_H6_THS_MFC, + SUN50I_THS_FILTER_EN | + SUN50I_THS_FILTER_TYPE(1)); + /* period = (x + 1) * 4096 / clkin; ~10ms */ + regmap_write(tmdev->regmap, SUN50I_H6_THS_PC, + SUN50I_H6_THS_PC_TEMP_PERIOD(58)); + /* enable sensor */ + val = GENMASK(tmdev->chip->sensor_num - 1, 0); + regmap_write(tmdev->regmap, SUN50I_H6_THS_ENABLE, val); + /* thermal data interrupt enable */ + val = GENMASK(tmdev->chip->sensor_num - 1, 0); + regmap_write(tmdev->regmap, SUN50I_H6_THS_DIC, val); + + return 0; +} + +static const struct ths_thermal_chip sun50i_h6_ths = { + .sensor_num = 2, + .offset = -2794, + .scale = -67, + .ft_deviation = SUN50I_H6_FT_DEVIATION, + .temp_calib_base = SUN50I_H6_THS_TEMP_CALIB, + .temp_data_base = SUN50I_H6_THS_TEMP_DATA, + .calibrate = sun50i_ths_calibrate, + .init = sun50i_thermal_init, + .irq_thread = sun50i_h6_irq_thread, +}; + +static const struct of_device_id of_ths_match[] = { + { .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, of_ths_match); + +static struct platform_driver ths_driver = { + .probe = sun8i_ths_probe, + .remove = sun8i_ths_remove, + .driver = { + .name = "sun8i-thermal", + .of_match_table = of_ths_match, + }, +}; +module_platform_driver(ths_driver); + +MODULE_DESCRIPTION("Thermal sensor driver for Allwinner SOC"); +MODULE_LICENSE("GPL v2"); -- 2.17.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel