* [PATCH v4 1/4] ARM: dts: stm32mp157: Add missing pinctrl definitions
2019-06-12 7:54 [PATCH v4 0/4] Add Avenger96 board support Manivannan Sadhasivam
@ 2019-06-12 7:54 ` Manivannan Sadhasivam
2019-06-12 7:54 ` [PATCH v4 2/4] dt-bindings: arm: stm32: Convert STM32 SoC bindings to DT schema Manivannan Sadhasivam
` (3 subsequent siblings)
4 siblings, 0 replies; 7+ messages in thread
From: Manivannan Sadhasivam @ 2019-06-12 7:54 UTC (permalink / raw)
To: mcoquelin.stm32, alexandre.torgue, robh+dt
Cc: devicetree, loic.pallardy, linux-kernel, Manivannan Sadhasivam,
linux-stm32, linux-arm-kernel
Add missing pinctrl definitions for STM32MP157 MPU.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 75 +++++++++++++++++++++++
1 file changed, 75 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
index 85c417d9983b..5efae4b4b37f 100644
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -241,6 +241,23 @@
};
};
+ i2c1_pins_b: i2c1-2 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */
+ <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c1_pins_sleep_b: i2c1-3 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */
+ <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
+ };
+ };
+
i2c2_pins_a: i2c2-0 {
pins {
pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
@@ -258,6 +275,21 @@
};
};
+ i2c2_pins_b1: i2c2-2 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c2_pins_sleep_b1: i2c2-3 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
+ };
+ };
+
i2c5_pins_a: i2c5-0 {
pins {
pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */
@@ -599,6 +631,34 @@
bias-disable;
};
};
+
+ uart4_pins_b: uart4-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
+ uart7_pins_a: uart7-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */
+ <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */
+ <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */
+ bias-disable;
+ };
+ };
};
pinctrl_z: pin-controller-z@54004000 {
@@ -623,6 +683,21 @@
gpio-ranges = <&pinctrl_z 0 400 8>;
};
+ i2c2_pins_b2: i2c2-0 {
+ pins {
+ pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c2_pins_sleep_b2: i2c2-1 {
+ pins {
+ pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */
+ };
+ };
+
i2c4_pins_a: i2c4-0 {
pins {
pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v4 2/4] dt-bindings: arm: stm32: Convert STM32 SoC bindings to DT schema
2019-06-12 7:54 [PATCH v4 0/4] Add Avenger96 board support Manivannan Sadhasivam
2019-06-12 7:54 ` [PATCH v4 1/4] ARM: dts: stm32mp157: Add missing pinctrl definitions Manivannan Sadhasivam
@ 2019-06-12 7:54 ` Manivannan Sadhasivam
2019-06-12 16:02 ` Rob Herring
2019-06-12 7:54 ` [PATCH v4 3/4] dt-bindings: arm: stm32: Document Avenger96 devicetree binding Manivannan Sadhasivam
` (2 subsequent siblings)
4 siblings, 1 reply; 7+ messages in thread
From: Manivannan Sadhasivam @ 2019-06-12 7:54 UTC (permalink / raw)
To: mcoquelin.stm32, alexandre.torgue, robh+dt
Cc: devicetree, loic.pallardy, linux-kernel, Manivannan Sadhasivam,
linux-stm32, linux-arm-kernel
This commit converts STM32 SoC bindings to DT schema using jsonschema.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
.../devicetree/bindings/arm/stm32/stm32.txt | 10 -------
.../devicetree/bindings/arm/stm32/stm32.yaml | 29 +++++++++++++++++++
2 files changed, 29 insertions(+), 10 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/arm/stm32/stm32.txt
create mode 100644 Documentation/devicetree/bindings/arm/stm32/stm32.yaml
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.txt b/Documentation/devicetree/bindings/arm/stm32/stm32.txt
deleted file mode 100644
index 6808ed9ddfd5..000000000000
--- a/Documentation/devicetree/bindings/arm/stm32/stm32.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-STMicroelectronics STM32 Platforms Device Tree Bindings
-
-Each device tree must specify which STM32 SoC it uses,
-using one of the following compatible strings:
-
- st,stm32f429
- st,stm32f469
- st,stm32f746
- st,stm32h743
- st,stm32mp157
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
new file mode 100644
index 000000000000..f53dc0f2d7b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/stm32/stm32.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Platforms Device Tree Bindings
+
+maintainers:
+ - Alexandre Torgue <alexandre.torgue@st.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: st,stm32f429
+
+ - items:
+ - const: st,stm32f469
+
+ - items:
+ - const: st,stm32f746
+
+ - items:
+ - const: st,stm32h743
+
+ - items:
+ - const: st,stm32mp157
+...
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH v4 2/4] dt-bindings: arm: stm32: Convert STM32 SoC bindings to DT schema
2019-06-12 7:54 ` [PATCH v4 2/4] dt-bindings: arm: stm32: Convert STM32 SoC bindings to DT schema Manivannan Sadhasivam
@ 2019-06-12 16:02 ` Rob Herring
0 siblings, 0 replies; 7+ messages in thread
From: Rob Herring @ 2019-06-12 16:02 UTC (permalink / raw)
To: Manivannan Sadhasivam
Cc: devicetree, Alexandre Torgue, loic pallardy, linux-kernel,
Maxime Coquelin, linux-stm32,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
On Wed, Jun 12, 2019 at 1:55 AM Manivannan Sadhasivam
<manivannan.sadhasivam@linaro.org> wrote:
>
> This commit converts STM32 SoC bindings to DT schema using jsonschema.
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
> .../devicetree/bindings/arm/stm32/stm32.txt | 10 -------
> .../devicetree/bindings/arm/stm32/stm32.yaml | 29 +++++++++++++++++++
> 2 files changed, 29 insertions(+), 10 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/arm/stm32/stm32.txt
> create mode 100644 Documentation/devicetree/bindings/arm/stm32/stm32.yaml
Reviewed-by: Rob Herring <robh@kernel.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v4 3/4] dt-bindings: arm: stm32: Document Avenger96 devicetree binding
2019-06-12 7:54 [PATCH v4 0/4] Add Avenger96 board support Manivannan Sadhasivam
2019-06-12 7:54 ` [PATCH v4 1/4] ARM: dts: stm32mp157: Add missing pinctrl definitions Manivannan Sadhasivam
2019-06-12 7:54 ` [PATCH v4 2/4] dt-bindings: arm: stm32: Convert STM32 SoC bindings to DT schema Manivannan Sadhasivam
@ 2019-06-12 7:54 ` Manivannan Sadhasivam
2019-06-12 7:54 ` [PATCH v4 4/4] ARM: dts: Add Avenger96 devicetree support based on STM32MP157A Manivannan Sadhasivam
2019-06-17 12:28 ` [PATCH v4 0/4] Add Avenger96 board support Alexandre Torgue
4 siblings, 0 replies; 7+ messages in thread
From: Manivannan Sadhasivam @ 2019-06-12 7:54 UTC (permalink / raw)
To: mcoquelin.stm32, alexandre.torgue, robh+dt
Cc: devicetree, loic.pallardy, linux-kernel, Manivannan Sadhasivam,
linux-stm32, linux-arm-kernel
This commit documents Avenger96 devicetree binding based on
STM32MP157 SoC.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
index f53dc0f2d7b3..4d194f1eb03a 100644
--- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
@@ -25,5 +25,7 @@ properties:
- const: st,stm32h743
- items:
+ - enum:
+ - arrow,stm32mp157a-avenger96 # Avenger96
- const: st,stm32mp157
...
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v4 4/4] ARM: dts: Add Avenger96 devicetree support based on STM32MP157A
2019-06-12 7:54 [PATCH v4 0/4] Add Avenger96 board support Manivannan Sadhasivam
` (2 preceding siblings ...)
2019-06-12 7:54 ` [PATCH v4 3/4] dt-bindings: arm: stm32: Document Avenger96 devicetree binding Manivannan Sadhasivam
@ 2019-06-12 7:54 ` Manivannan Sadhasivam
2019-06-17 12:28 ` [PATCH v4 0/4] Add Avenger96 board support Alexandre Torgue
4 siblings, 0 replies; 7+ messages in thread
From: Manivannan Sadhasivam @ 2019-06-12 7:54 UTC (permalink / raw)
To: mcoquelin.stm32, alexandre.torgue, robh+dt
Cc: devicetree, loic.pallardy, linux-kernel, Manivannan Sadhasivam,
linux-stm32, linux-arm-kernel
Add devicetree support for Avenger96 board based on STM32MP157A MPU
from ST Micro. This board is one of the 96Boards Consumer Edition board
from Arrow Electronics and has the following features:
SoC: STM32MP157AAC
PMIC: STPMIC1A
RAM: 1024 Mbyte @ 533MHz
Storage: eMMC v4.51: 8 Gbyte
microSD Socket: UHS-1 v3.01
Ethernet Port: 10/100/1000 Mbit/s, IEEE 802.3 Compliant
Wireless: WiFi 5 GHz & 2.4GHz IEEE 802.11a/b/g/n/ac
Bluetooth®v4.2 (BR/EDR/BLE)
USB: 2x Type A (USB 2.0) Host and 1x Micro B (USB 2.0) OTG
Display: HDMI: WXGA (1366x768)@ 60 fps, HDMI 1.4
LED: 4x User LED, 1x WiFi LED, 1x BT LED
More information about this board can be found in 96Boards website:
https://www.96boards.org/product/avenger96/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/stm32mp157a-avenger96.dts | 321 ++++++++++++++++++++
2 files changed, 322 insertions(+)
create mode 100644 arch/arm/boot/dts/stm32mp157a-avenger96.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index dab2914fa293..918c85c227b5 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -975,6 +975,7 @@ dtb-$(CONFIG_ARCH_STM32) += \
stm32746g-eval.dtb \
stm32h743i-eval.dtb \
stm32h743i-disco.dtb \
+ stm32mp157a-avenger96.dtb \
stm32mp157a-dk1.dtb \
stm32mp157c-dk2.dtb \
stm32mp157c-ed1.dtb \
diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
new file mode 100644
index 000000000000..9d00be78010f
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
@@ -0,0 +1,321 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "stm32mp157c.dtsi"
+#include "stm32mp157-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+ model = "Arrow Electronics STM32MP157A Avenger96 board";
+ compatible = "arrow,stm32mp157a-avenger96", "st,stm32mp157";
+
+ aliases {
+ ethernet0 = ðernet0;
+ mmc0 = &sdmmc1;
+ serial0 = &uart4;
+ serial1 = &uart7;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@c0000000 {
+ device_type = "memory";
+ reg = <0xc0000000 0x40000000>;
+ };
+
+ led {
+ compatible = "gpio-leds";
+ led1 {
+ label = "green:user1";
+ gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led2 {
+ label = "green:user2";
+ gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led3 {
+ label = "green:user3";
+ gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc1";
+ default-state = "off";
+ };
+
+ led4 {
+ label = "green:user3";
+ gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ default-state = "off";
+ panic-indicator;
+ };
+
+ led5 {
+ label = "yellow:wifi";
+ gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+
+ led6 {
+ label = "blue:bt";
+ gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "bluetooth-power";
+ default-state = "off";
+ };
+ };
+};
+
+ðernet0 {
+ status = "okay";
+ pinctrl-0 = <ðernet0_rgmii_pins_a>;
+ pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>;
+ pinctrl-names = "default", "sleep";
+ phy-mode = "rgmii";
+ max-speed = <1000>;
+ phy-handle = <&phy0>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy0: ethernet-phy@7 {
+ reg = <7>;
+ };
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_b>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+ /delete-property/dmas;
+ /delete-property/dma-names;
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_b1 &i2c2_pins_b2>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+ /delete-property/dmas;
+ /delete-property/dma-names;
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+ /delete-property/dmas;
+ /delete-property/dma-names;
+
+ pmic: stpmic@33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+ interrupts-extended = <&exti 55 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "okay";
+
+ st,main-control-register = <0x04>;
+ st,vin-control-register = <0xc0>;
+ st,usb-control-register = <0x30>;
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+
+ ldo1-supply = <&v3v3>;
+ ldo2-supply = <&v3v3>;
+ ldo3-supply = <&vdd_ddr>;
+ ldo5-supply = <&v3v3>;
+ ldo6-supply = <&v3v3>;
+ pwr_sw1-supply = <&bst_out>;
+ pwr_sw2-supply = <&bst_out>;
+
+ vddcore: buck1 {
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd_ddr: buck2 {
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ st,mask_reset;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ v3v3: buck4 {
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ regulator-initial-mode = <0>;
+ };
+
+ vdda: ldo1 {
+ regulator-name = "vdda";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ interrupts = <IT_CURLIM_LDO1 0>;
+ interrupt-parent = <&pmic>;
+ };
+
+ v2v8: ldo2 {
+ regulator-name = "v2v8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ interrupts = <IT_CURLIM_LDO2 0>;
+ interrupt-parent = <&pmic>;
+ };
+
+ vtt_ddr: ldo3 {
+ regulator-name = "vtt_ddr";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <750000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ vdd_usb: ldo4 {
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ interrupts = <IT_CURLIM_LDO4 0>;
+ interrupt-parent = <&pmic>;
+ };
+
+ vdd_sd: ldo5 {
+ regulator-name = "vdd_sd";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ interrupts = <IT_CURLIM_LDO5 0>;
+ interrupt-parent = <&pmic>;
+ regulator-boot-on;
+ };
+
+ v1v8: ldo6 {
+ regulator-name = "v1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ interrupts = <IT_CURLIM_LDO6 0>;
+ interrupt-parent = <&pmic>;
+ regulator-enable-ramp-delay = <300000>;
+ };
+
+ vref_ddr: vref_ddr {
+ regulator-name = "vref_ddr";
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ bst_out: boost {
+ regulator-name = "bst_out";
+ interrupts = <IT_OCP_BOOST 0>;
+ interrupt-parent = <&pmic>;
+ };
+
+ vbus_otg: pwr_sw1 {
+ regulator-name = "vbus_otg";
+ interrupts = <IT_OCP_OTG 0>;
+ interrupt-parent = <&pmic>;
+ regulator-active-discharge;
+ };
+
+ vbus_sw: pwr_sw2 {
+ regulator-name = "vbus_sw";
+ interrupts = <IT_OCP_SWOUT 0>;
+ interrupt-parent = <&pmic>;
+ regulator-active-discharge;
+ };
+ };
+
+ onkey {
+ compatible = "st,stpmic1-onkey";
+ interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
+ interrupt-names = "onkey-falling", "onkey-rising";
+ status = "okay";
+ };
+
+ watchdog {
+ compatible = "st,stpmic1-wdt";
+ status = "disabled";
+ };
+ };
+};
+
+&iwdg2 {
+ timeout-sec = <32>;
+ status = "okay";
+};
+
+&rng1 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sdmmc1 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+ broken-cd;
+ st,sig-dir;
+ st,neg-edge;
+ st,use-ckin;
+ bus-width = <4>;
+ vmmc-supply = <&vdd_sd>;
+ status = "okay";
+};
+
+&uart4 {
+ /* On Low speed expansion header */
+ label = "LS-UART1";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_b>;
+ status = "okay";
+};
+
+&uart7 {
+ /* On Low speed expansion header */
+ label = "LS-UART0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart7_pins_a>;
+ status = "okay";
+};
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH v4 0/4] Add Avenger96 board support
2019-06-12 7:54 [PATCH v4 0/4] Add Avenger96 board support Manivannan Sadhasivam
` (3 preceding siblings ...)
2019-06-12 7:54 ` [PATCH v4 4/4] ARM: dts: Add Avenger96 devicetree support based on STM32MP157A Manivannan Sadhasivam
@ 2019-06-17 12:28 ` Alexandre Torgue
4 siblings, 0 replies; 7+ messages in thread
From: Alexandre Torgue @ 2019-06-17 12:28 UTC (permalink / raw)
To: Manivannan Sadhasivam, mcoquelin.stm32, robh+dt
Cc: devicetree, loic.pallardy, linux-stm32, linux-arm-kernel, linux-kernel
Hi Mani,
On 6/12/19 9:54 AM, Manivannan Sadhasivam wrote:
> Hello,
>
> This patchset adds Avenger96 board support. This board is one of the
> Consumer Edition boards of the 96Boards family from Arrow Electronics
> featuring STM32MP157A MPU and has the following features:
>
> SoC: STM32MP157AAC
> PMIC: STPMIC1A
> RAM: 1024 Mbyte @ 533MHz
> Storage: eMMC v4.51: 8 Gbyte
> microSD Socket: UHS-1 v3.01
> Ethernet Port: 10/100/1000 Mbit/s, IEEE 802.3 Compliant
> Wireless: WiFi 5 GHz & 2.4GHz IEEE 802.11a/b/g/n/ac
> Bluetooth®v4.2 (BR/EDR/BLE)
> USB: 2x Type A (USB 2.0) Host and 1x Micro B (USB 2.0) OTG
> Display: HDMI: WXGA (1366x768)@ 60 fps, HDMI 1.4
> LED: 4x User LED, 1x WiFi LED, 1x BT LED
>
> More information about this board can be found in 96Boards website:
> https://www.96boards.org/product/avenger96/
>
> Thanks,
> Mani
>
Thanks to extend the stm32 family!
I just format commit message title for device tree patches ("ARM: dts:
stm32 ...").
Rob, I took also the dt-binding patches.
Series applied on stm32-next.
Regards
Alex
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 7+ messages in thread