Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2 0/2] Add 96Boards Meerkat96 board support
@ 2019-06-13 13:27 Manivannan Sadhasivam
  2019-06-13 13:27 ` [PATCH v2 1/2] dt-bindings: arm: Document 96Boards Meerkat96 devicetree binding Manivannan Sadhasivam
  2019-06-13 13:27 ` [PATCH v2 2/2] ARM: dts: Add support for 96Boards Meerkat96 board Manivannan Sadhasivam
  0 siblings, 2 replies; 5+ messages in thread
From: Manivannan Sadhasivam @ 2019-06-13 13:27 UTC (permalink / raw)
  To: shawnguo, s.hauer, robh+dt, festevam
  Cc: devicetree, linux-kernel, yossi, pbrobinson, kernel,
	Manivannan Sadhasivam, linux-arm-kernel, linux-imx

Hello,

This patchset adds board support for 96Boards Meerkat96 board from
Novtech. This board is one of the Consumer Edition boards of the 96Boards
family based on i.MX7D SoC. Following are the currently supported
features of the board:

* uSD
* WiFi/BT
* USB

More information about this board can be found in 96Boards product page:
https://www.96boards.org/product/imx7-96/

Thanks,
Mani

Changes in v2:

* Addressed the comments from Shawn on board dts.

Manivannan Sadhasivam (2):
  dt-bindings: arm: Document 96Boards Meerkat96 devicetree binding
  ARM: dts: Add support for 96Boards Meerkat96 board

 .../devicetree/bindings/arm/fsl.yaml          |   1 +
 arch/arm/boot/dts/Makefile                    |   1 +
 arch/arm/boot/dts/imx7d-meerkat96.dts         | 389 ++++++++++++++++++
 3 files changed, 391 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx7d-meerkat96.dts

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v2 1/2] dt-bindings: arm: Document 96Boards Meerkat96 devicetree binding
  2019-06-13 13:27 [PATCH v2 0/2] Add 96Boards Meerkat96 board support Manivannan Sadhasivam
@ 2019-06-13 13:27 ` Manivannan Sadhasivam
  2019-06-13 13:27 ` [PATCH v2 2/2] ARM: dts: Add support for 96Boards Meerkat96 board Manivannan Sadhasivam
  1 sibling, 0 replies; 5+ messages in thread
From: Manivannan Sadhasivam @ 2019-06-13 13:27 UTC (permalink / raw)
  To: shawnguo, s.hauer, robh+dt, festevam
  Cc: devicetree, linux-kernel, yossi, pbrobinson, kernel,
	Manivannan Sadhasivam, linux-arm-kernel, linux-imx

Document 96Boards Meerkat96 devicetree binding based on i.MX7D SoC.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 7e2cd6ad26bd..dcd6c90b0cef 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -141,6 +141,7 @@ properties:
         items:
           - enum:
               - fsl,imx7d-sdb             # i.MX7 SabreSD Board
+              - novtech,imx7d-meerkat96   # i.MX7 Meerkat96 Board
           - const: fsl,imx7d
 
       - description:
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v2 2/2] ARM: dts: Add support for 96Boards Meerkat96 board
  2019-06-13 13:27 [PATCH v2 0/2] Add 96Boards Meerkat96 board support Manivannan Sadhasivam
  2019-06-13 13:27 ` [PATCH v2 1/2] dt-bindings: arm: Document 96Boards Meerkat96 devicetree binding Manivannan Sadhasivam
@ 2019-06-13 13:27 ` Manivannan Sadhasivam
  2019-06-14 11:44   ` Manivannan Sadhasivam
  1 sibling, 1 reply; 5+ messages in thread
From: Manivannan Sadhasivam @ 2019-06-13 13:27 UTC (permalink / raw)
  To: shawnguo, s.hauer, robh+dt, festevam
  Cc: devicetree, linux-kernel, yossi, pbrobinson, kernel,
	Manivannan Sadhasivam, linux-arm-kernel, linux-imx

Add devicetree support for 96Boards Meerkat96 board from Novtech. This
board is one of the Consumer Edition boards of the 96Boards family based
on i.MX7D SoC. Following are the currently supported features of the
board:

* uSD
* WiFi/BT
* USB

More information about this board can be found in 96Boards product page:
https://www.96boards.org/product/imx7-96/

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm/boot/dts/Makefile            |   1 +
 arch/arm/boot/dts/imx7d-meerkat96.dts | 389 ++++++++++++++++++++++++++
 2 files changed, 390 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx7d-meerkat96.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f4f5aeaf3298..3018a763dbd1 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -579,6 +579,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-cl-som-imx7.dtb \
 	imx7d-colibri-emmc-eval-v3.dtb \
 	imx7d-colibri-eval-v3.dtb \
+	imx7d-meerkat96.dtb \
 	imx7d-nitrogen7.dtb \
 	imx7d-pico-hobbit.dtb \
 	imx7d-pico-pi.dtb \
diff --git a/arch/arm/boot/dts/imx7d-meerkat96.dts b/arch/arm/boot/dts/imx7d-meerkat96.dts
new file mode 100644
index 000000000000..a86dc4878e44
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-meerkat96.dts
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2019 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "imx7d.dtsi"
+
+/ {
+	model = "96Boards Meerkat96 Board";
+	compatible = "novtech,imx7d-meerkat96", "fsl,imx7d";
+
+	chosen {
+		stdout-path = &uart6;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512MB */
+	};
+
+	reg_wlreg_on: regulator-wlreg-on {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlreg_on>;
+		regulator-name = "wlreg_on";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100>;
+		gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sw1a_reg: sw1a {
+		compatible = "regulator-fixed";
+		regulator-name = "sw1a_reg";
+		regulator-min-microvolt = <700000>;
+		regulator-max-microvolt = <1475000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-ramp-delay = <6250>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led1 {
+			label = "green:user1";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "green:user2";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "green:user3";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		led4 {
+			label = "green:user4";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			panic-indicator;
+		};
+
+		led5 {
+			label = "yellow:wlan";
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		led6 {
+			label = "blue:bt";
+			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart7 &pinctrl_bt_gpios>;
+	assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		device-wakeup-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	keep-power-in-suspend;
+	tuning-step = <2>;
+	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v;
+	broken-cd;
+	status = "okay";
+};
+
+&usdhc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-mmc;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_wlreg_on>;
+	vqmmc-supply =<&reg_3p3v>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan_irq>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&iomuxc {
+	pinctrl_bt_gpios: btgpiosgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x59
+			MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17	0x1f
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x59
+			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x59
+			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x59
+			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x59
+			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x59
+			MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x59
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
+			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD1__I2C3_SDA	0x4000007f
+			MX7D_PAD_ENET1_RGMII_RD0__I2C3_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA		0x4000007f
+			MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_lcdif: lcdifgrp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
+			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
+			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
+			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
+			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
+			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
+			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
+			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
+			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
+			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
+			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
+			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
+			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
+			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
+			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
+			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
+			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
+			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
+			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
+			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
+			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
+			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
+			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
+			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
+			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
+			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
+			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
+			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+			MX7D_PAD_LCD_RESET__LCD_RESET		0x79
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_DATA4__UART3_DCE_RX	0x79
+			MX7D_PAD_SD3_DATA5__UART3_DCE_TX	0x79
+			MX7D_PAD_SD3_DATA6__UART3_DCE_RTS	0x79
+			MX7D_PAD_SD3_DATA7__UART3_DCE_CTS	0x79
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CD_B__UART6_DCE_RX		0x79
+			MX7D_PAD_SD1_WP__UART6_DCE_TX		0x79
+		>;
+	};
+
+	pinctrl_uart7: uart7grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI2_SCLK__UART7_DTE_TX	0x79
+			MX7D_PAD_ECSPI2_MOSI__UART7_DTE_RX	0x79
+			MX7D_PAD_ECSPI2_MISO__UART7_DTE_CTS	0x79
+			MX7D_PAD_ECSPI2_SS0__UART7_DTE_RTS	0x79
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x0D
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+		>;
+	};
+
+	pinctrl_wlan_irq: wlanirqgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14	0x19
+		>;
+	};
+
+	pinctrl_wlreg_on: wlregongrp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15	0x19
+		>;
+	};
+};
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v2 2/2] ARM: dts: Add support for 96Boards Meerkat96 board
  2019-06-13 13:27 ` [PATCH v2 2/2] ARM: dts: Add support for 96Boards Meerkat96 board Manivannan Sadhasivam
@ 2019-06-14 11:44   ` Manivannan Sadhasivam
  2019-06-18  7:55     ` Shawn Guo
  0 siblings, 1 reply; 5+ messages in thread
From: Manivannan Sadhasivam @ 2019-06-14 11:44 UTC (permalink / raw)
  To: shawnguo
  Cc: devicetree, s.hauer, linux-kernel, yossi, robh+dt, linux-imx,
	kernel, festevam, linux-arm-kernel, pbrobinson

Hi Shawn,

On Thu, Jun 13, 2019 at 06:57:05PM +0530, Manivannan Sadhasivam wrote:
> Add devicetree support for 96Boards Meerkat96 board from Novtech. This
> board is one of the Consumer Edition boards of the 96Boards family based
> on i.MX7D SoC. Following are the currently supported features of the
> board:
> 
> * uSD
> * WiFi/BT
> * USB
> 
> More information about this board can be found in 96Boards product page:
> https://www.96boards.org/product/imx7-96/
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>  arch/arm/boot/dts/Makefile            |   1 +
>  arch/arm/boot/dts/imx7d-meerkat96.dts | 389 ++++++++++++++++++++++++++
>  2 files changed, 390 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx7d-meerkat96.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index f4f5aeaf3298..3018a763dbd1 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -579,6 +579,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
>  	imx7d-cl-som-imx7.dtb \
>  	imx7d-colibri-emmc-eval-v3.dtb \
>  	imx7d-colibri-eval-v3.dtb \
> +	imx7d-meerkat96.dtb \
>  	imx7d-nitrogen7.dtb \
>  	imx7d-pico-hobbit.dtb \
>  	imx7d-pico-pi.dtb \
> diff --git a/arch/arm/boot/dts/imx7d-meerkat96.dts b/arch/arm/boot/dts/imx7d-meerkat96.dts
> new file mode 100644
> index 000000000000..a86dc4878e44
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx7d-meerkat96.dts
> @@ -0,0 +1,389 @@
> +// SPDX-License-Identifier: GPL-2.0+ OR MIT
> +/*
> + * Copyright (C) 2019 Linaro Ltd.
> + */
> +
> +/dts-v1/;
> +
> +#include "imx7d.dtsi"
> +
> +/ {
> +	model = "96Boards Meerkat96 Board";
> +	compatible = "novtech,imx7d-meerkat96", "fsl,imx7d";
> +
> +	chosen {
> +		stdout-path = &uart6;
> +	};
> +
> +	memory@80000000 {
> +		device_type = "memory";
> +		reg = <0x80000000 0x20000000>; /* 512MB */
> +	};
> +
> +	reg_wlreg_on: regulator-wlreg-on {
> +		compatible = "regulator-fixed";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_wlreg_on>;
> +		regulator-name = "wlreg_on";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		startup-delay-us = <100>;
> +		gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +		regulator-always-on;
> +	};
> +
> +	reg_3p3v: regulator-3p3v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "3P3V";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-always-on;
> +	};
> +
> +	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
> +		compatible = "regulator-fixed";
> +		regulator-name = "usb_otg1_vbus";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +	};
> +
> +	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
> +		compatible = "regulator-fixed";
> +		regulator-name = "usb_otg2_vbus";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
> +	sw1a_reg: sw1a {
> +		compatible = "regulator-fixed";

Actually I was wrong here. This is not a fixed regulator node as the voltage
level varies. Since there is no PMIC support exist now, can I remove this node?
Or I should make it as fixed 0.7v?

Thanks,
Mani

> +		regulator-name = "sw1a_reg";
> +		regulator-min-microvolt = <700000>;
> +		regulator-max-microvolt = <1475000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +		regulator-ramp-delay = <6250>;
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_gpio_leds>;
> +
> +		led1 {
> +			label = "green:user1";
> +			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
> +			linux,default-trigger = "heartbeat";
> +			default-state = "off";
> +		};
> +
> +		led2 {
> +			label = "green:user2";
> +			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
> +			linux,default-trigger = "mmc0";
> +			default-state = "off";
> +		};
> +
> +		led3 {
> +			label = "green:user3";
> +			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
> +			linux,default-trigger = "mmc1";
> +			default-state = "off";
> +		};
> +
> +		led4 {
> +			label = "green:user4";
> +			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
> +			linux,default-trigger = "none";
> +			default-state = "off";
> +			panic-indicator;
> +		};
> +
> +		led5 {
> +			label = "yellow:wlan";
> +			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "phy0tx";
> +			default-state = "off";
> +		};
> +
> +		led6 {
> +			label = "blue:bt";
> +			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "bluetooth-power";
> +			default-state = "off";
> +		};
> +	};
> +};
> +
> +&cpu0 {
> +	cpu-supply = <&sw1a_reg>;
> +};
> +
> +&i2c1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c1>;
> +	status = "okay";
> +};
> +
> +&i2c2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c2>;
> +	status = "okay";
> +};
> +
> +&i2c3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c3>;
> +	status = "okay";
> +};
> +
> +&i2c4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c4>;
> +	status = "okay";
> +};
> +
> +&lcdif {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_lcdif>;
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1>;
> +	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
> +	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
> +	status = "okay";
> +};
> +
> +&uart3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart3>;
> +	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
> +	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
> +	uart-has-rtscts;
> +	status = "okay";
> +};
> +
> +&uart6 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart6>;
> +	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
> +	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
> +	status = "okay";
> +};
> +
> +&uart7 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart7 &pinctrl_bt_gpios>;
> +	assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>;
> +	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
> +	uart-has-rtscts;
> +	fsl,dte-mode;
> +	status = "okay";
> +
> +	bluetooth {
> +		compatible = "brcm,bcm43438-bt";
> +		device-wakeup-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
> +		host-wakeup-gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
> +	};
> +};
> +
> +&usbotg1 {
> +	vbus-supply = <&reg_usb_otg1_vbus>;
> +	status = "okay";
> +};
> +
> +&usbotg2 {
> +	vbus-supply = <&reg_usb_otg2_vbus>;
> +	dr_mode = "host";
> +	status = "okay";
> +};
> +
> +&usdhc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc1>;
> +	keep-power-in-suspend;
> +	tuning-step = <2>;
> +	vmmc-supply = <&reg_3p3v>;
> +	no-1-8-v;
> +	broken-cd;
> +	status = "okay";
> +};
> +
> +&usdhc3 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc3>;
> +	bus-width = <4>;
> +	no-1-8-v;
> +	no-mmc;
> +	non-removable;
> +	keep-power-in-suspend;
> +	wakeup-source;
> +	vmmc-supply = <&reg_wlreg_on>;
> +	vqmmc-supply =<&reg_3p3v>;
> +	status = "okay";
> +
> +	brcmf: wifi@1 {
> +		reg = <1>;
> +		compatible = "brcm,bcm4329-fmac";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_wlan_irq>;
> +		interrupt-parent = <&gpio6>;
> +		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-names = "host-wake";
> +	};
> +};
> +
> +&iomuxc {
> +	pinctrl_bt_gpios: btgpiosgrp {
> +		fsl,pins = <
> +			MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x59
> +			MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17	0x1f
> +		>;
> +	};
> +
> +	pinctrl_gpio_leds: gpioledsgrp {
> +		fsl,pins = <
> +			MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x59
> +			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x59
> +			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x59
> +			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x59
> +			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x59
> +			MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x59
> +		>;
> +	};
> +
> +	pinctrl_i2c1: i2c1grp {
> +		fsl,pins = <
> +			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
> +			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
> +		>;
> +	};
> +
> +	pinctrl_i2c2: i2c2grp {
> +		fsl,pins = <
> +			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
> +			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
> +		>;
> +	};
> +
> +	pinctrl_i2c3: i2c3grp {
> +		fsl,pins = <
> +			MX7D_PAD_ENET1_RGMII_RD1__I2C3_SDA	0x4000007f
> +			MX7D_PAD_ENET1_RGMII_RD0__I2C3_SCL	0x4000007f
> +		>;
> +	};
> +
> +	pinctrl_i2c4: i2c4grp {
> +		fsl,pins = <
> +			MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA		0x4000007f
> +			MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL		0x4000007f
> +		>;
> +	};
> +
> +	pinctrl_lcdif: lcdifgrp {
> +		fsl,pins = <
> +			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
> +			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
> +			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
> +			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
> +			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
> +			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
> +			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
> +			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
> +			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
> +			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
> +			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
> +			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
> +			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
> +			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
> +			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
> +			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
> +			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
> +			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
> +			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
> +			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
> +			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
> +			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
> +			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
> +			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
> +			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
> +			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
> +			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
> +			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
> +			MX7D_PAD_LCD_RESET__LCD_RESET		0x79
> +		>;
> +	};
> +
> +	pinctrl_uart1: uart1grp {
> +		fsl,pins = <
> +			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
> +			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
> +		>;
> +	};
> +
> +	pinctrl_uart3: uart3grp {
> +		fsl,pins = <
> +			MX7D_PAD_SD3_DATA4__UART3_DCE_RX	0x79
> +			MX7D_PAD_SD3_DATA5__UART3_DCE_TX	0x79
> +			MX7D_PAD_SD3_DATA6__UART3_DCE_RTS	0x79
> +			MX7D_PAD_SD3_DATA7__UART3_DCE_CTS	0x79
> +		>;
> +	};
> +
> +	pinctrl_uart6: uart6grp {
> +		fsl,pins = <
> +			MX7D_PAD_SD1_CD_B__UART6_DCE_RX		0x79
> +			MX7D_PAD_SD1_WP__UART6_DCE_TX		0x79
> +		>;
> +	};
> +
> +	pinctrl_uart7: uart7grp {
> +		fsl,pins = <
> +			MX7D_PAD_ECSPI2_SCLK__UART7_DTE_TX	0x79
> +			MX7D_PAD_ECSPI2_MOSI__UART7_DTE_RX	0x79
> +			MX7D_PAD_ECSPI2_MISO__UART7_DTE_CTS	0x79
> +			MX7D_PAD_ECSPI2_SS0__UART7_DTE_RTS	0x79
> +		>;
> +	};
> +
> +	pinctrl_usdhc1: usdhc1grp {
> +		fsl,pins = <
> +			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
> +			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
> +			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
> +			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
> +			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
> +			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
> +		>;
> +	};
> +
> +	pinctrl_usdhc3: usdhc3grp {
> +		fsl,pins = <
> +			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
> +			MX7D_PAD_SD3_CLK__SD3_CLK		0x0D
> +			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
> +			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
> +			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
> +			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
> +		>;
> +	};
> +
> +	pinctrl_wlan_irq: wlanirqgrp {
> +		fsl,pins = <
> +			MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14	0x19
> +		>;
> +	};
> +
> +	pinctrl_wlreg_on: wlregongrp {
> +		fsl,pins = <
> +			MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15	0x19
> +		>;
> +	};
> +};
> -- 
> 2.17.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v2 2/2] ARM: dts: Add support for 96Boards Meerkat96 board
  2019-06-14 11:44   ` Manivannan Sadhasivam
@ 2019-06-18  7:55     ` Shawn Guo
  0 siblings, 0 replies; 5+ messages in thread
From: Shawn Guo @ 2019-06-18  7:55 UTC (permalink / raw)
  To: Manivannan Sadhasivam
  Cc: devicetree, s.hauer, linux-kernel, yossi, robh+dt, linux-imx,
	kernel, festevam, linux-arm-kernel, pbrobinson

On Fri, Jun 14, 2019 at 05:14:33PM +0530, Manivannan Sadhasivam wrote:
> Hi Shawn,
> 
> On Thu, Jun 13, 2019 at 06:57:05PM +0530, Manivannan Sadhasivam wrote:
> > Add devicetree support for 96Boards Meerkat96 board from Novtech. This
> > board is one of the Consumer Edition boards of the 96Boards family based
> > on i.MX7D SoC. Following are the currently supported features of the
> > board:
> > 
> > * uSD
> > * WiFi/BT
> > * USB
> > 
> > More information about this board can be found in 96Boards product page:
> > https://www.96boards.org/product/imx7-96/
> > 
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> >  arch/arm/boot/dts/Makefile            |   1 +
> >  arch/arm/boot/dts/imx7d-meerkat96.dts | 389 ++++++++++++++++++++++++++
> >  2 files changed, 390 insertions(+)
> >  create mode 100644 arch/arm/boot/dts/imx7d-meerkat96.dts
> > 
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index f4f5aeaf3298..3018a763dbd1 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -579,6 +579,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
> >  	imx7d-cl-som-imx7.dtb \
> >  	imx7d-colibri-emmc-eval-v3.dtb \
> >  	imx7d-colibri-eval-v3.dtb \
> > +	imx7d-meerkat96.dtb \
> >  	imx7d-nitrogen7.dtb \
> >  	imx7d-pico-hobbit.dtb \
> >  	imx7d-pico-pi.dtb \
> > diff --git a/arch/arm/boot/dts/imx7d-meerkat96.dts b/arch/arm/boot/dts/imx7d-meerkat96.dts
> > new file mode 100644
> > index 000000000000..a86dc4878e44
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/imx7d-meerkat96.dts
> > @@ -0,0 +1,389 @@
> > +// SPDX-License-Identifier: GPL-2.0+ OR MIT
> > +/*
> > + * Copyright (C) 2019 Linaro Ltd.
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "imx7d.dtsi"
> > +
> > +/ {
> > +	model = "96Boards Meerkat96 Board";
> > +	compatible = "novtech,imx7d-meerkat96", "fsl,imx7d";
> > +
> > +	chosen {
> > +		stdout-path = &uart6;
> > +	};
> > +
> > +	memory@80000000 {
> > +		device_type = "memory";
> > +		reg = <0x80000000 0x20000000>; /* 512MB */
> > +	};
> > +
> > +	reg_wlreg_on: regulator-wlreg-on {
> > +		compatible = "regulator-fixed";
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&pinctrl_wlreg_on>;
> > +		regulator-name = "wlreg_on";
> > +		regulator-min-microvolt = <3300000>;
> > +		regulator-max-microvolt = <3300000>;
> > +		startup-delay-us = <100>;
> > +		gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
> > +		enable-active-high;
> > +		regulator-always-on;
> > +	};
> > +
> > +	reg_3p3v: regulator-3p3v {
> > +		compatible = "regulator-fixed";
> > +		regulator-name = "3P3V";
> > +		regulator-min-microvolt = <3300000>;
> > +		regulator-max-microvolt = <3300000>;
> > +		regulator-always-on;
> > +	};
> > +
> > +	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
> > +		compatible = "regulator-fixed";
> > +		regulator-name = "usb_otg1_vbus";
> > +		regulator-min-microvolt = <5000000>;
> > +		regulator-max-microvolt = <5000000>;
> > +	};
> > +
> > +	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
> > +		compatible = "regulator-fixed";
> > +		regulator-name = "usb_otg2_vbus";
> > +		regulator-min-microvolt = <5000000>;
> > +		regulator-max-microvolt = <5000000>;
> > +		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
> > +		enable-active-high;
> > +	};
> > +
> > +	sw1a_reg: sw1a {
> > +		compatible = "regulator-fixed";
> 
> Actually I was wrong here. This is not a fixed regulator node as the voltage
> level varies. Since there is no PMIC support exist now, can I remove this node?
> Or I should make it as fixed 0.7v?

I dropped it (&cpu0 as well) and applied both patches.  You can add it
later when you have the right information about it.

Shawn

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, back to index

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-13 13:27 [PATCH v2 0/2] Add 96Boards Meerkat96 board support Manivannan Sadhasivam
2019-06-13 13:27 ` [PATCH v2 1/2] dt-bindings: arm: Document 96Boards Meerkat96 devicetree binding Manivannan Sadhasivam
2019-06-13 13:27 ` [PATCH v2 2/2] ARM: dts: Add support for 96Boards Meerkat96 board Manivannan Sadhasivam
2019-06-14 11:44   ` Manivannan Sadhasivam
2019-06-18  7:55     ` Shawn Guo

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org infradead-linux-arm-kernel@archiver.kernel.org
	public-inbox-index linux-arm-kernel


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox