Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 1/2] ARM: dts: Add ZII support for ZII i.MX7 RMU2 board
@ 2019-06-14  8:03 Andrey Smirnov
  2019-06-14  8:03 ` [PATCH 2/2] dt-bindings: arm: fsl: Add " Andrey Smirnov
                   ` (2 more replies)
  0 siblings, 3 replies; 6+ messages in thread
From: Andrey Smirnov @ 2019-06-14  8:03 UTC (permalink / raw)
  To: linux-arm-kernel
  Cc: Rob Herring, Liang Pan, Andrey Smirnov, Shawn Guo, linux-kernel,
	devicetree, Bob Langer, Fabio Estevam, Chris Healy, Lucas Stach

Add support for ZII's i.MX7 based Remote Modem Unit 2 (RMU2) board.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Bob Langer <Bob.Langer@zii.aero>
Cc: Liang Pan <Liang.Pan@zii.aero>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
---
 arch/arm/boot/dts/Makefile           |   1 +
 arch/arm/boot/dts/imx7d-zii-rmu2.dts | 358 +++++++++++++++++++++++++++
 2 files changed, 359 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx7d-zii-rmu2.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 5559028b770e..516e2912236d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -593,6 +593,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-sdb.dtb \
 	imx7d-sdb-reva.dtb \
 	imx7d-sdb-sht11.dtb \
+	imx7d-zii-rmu2.dtb \
 	imx7d-zii-rpu2.dtb \
 	imx7s-colibri-eval-v3.dtb \
 	imx7s-mba7.dtb \
diff --git a/arch/arm/boot/dts/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/imx7d-zii-rmu2.dts
new file mode 100644
index 000000000000..10fdafe5e0e4
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-zii-rmu2.dts
@@ -0,0 +1,358 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device tree file for ZII's RMU2 board
+ *
+ * RMU - Remote Modem Unit
+ *
+ * Copyright (C) 2019 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include <dt-bindings/thermal/thermal.h>
+#include "imx7d.dtsi"
+
+/ {
+	model = "ZII RMU2 Board";
+	compatible = "zii,imx7d-rmu2", "fsl,imx7d";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pinctrl_leds_debug>;
+		pinctrl-names = "default";
+
+		debug {
+			label = "zii:green:debug1";
+			gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&cpu0 {
+	arm-supply = <&sw1a_reg>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	phy-handle = <&fec1_phy>;
+	status = "okay";
+
+	mdio {
+		fec1_phy: phy@0 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_enet1_phy_reset>,
+				    <&pinctrl_enet1_phy_interrupt>;
+			reg = <0>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpio = <&gpio5 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+
+	rave-sp {
+		compatible = "zii,rave-sp-rdu2";
+		current-speed = <1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog";
+		};
+
+		eeprom@a3 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa3 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+	};
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-sdio;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	no-sdio;
+	no-sd;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&snvs_pwrkey {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x2
+			MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x2
+			MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO	0x2
+			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19         0x59
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CD_B__ENET1_MDIO				0x3
+			MX7D_PAD_SD2_WP__ENET1_MDC				0x3
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC		0x1
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0		0x1
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1		0x1
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2		0x1
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3		0x1
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL		0x1
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC		0x1
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0		0x1
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1		0x1
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2		0x1
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3		0x1
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL		0x1
+		>;
+	};
+
+	pinctrl_enet1_phy_reset: enet1phyresetgrp {
+		fsl,pins = <
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x14
+
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_leds_debug: debuggrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x59
+		>;
+	};
+
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX	0x79
+			MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX	0x79
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_DATA0__UART4_DCE_RX	0x79
+			MX7D_PAD_SD2_DATA1__UART4_DCE_TX	0x79
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x59
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_enet1_phy_interrupt: enet1phyinterruptgrp {
+		fsl,phy = <
+			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x08
+		>;
+	};
+};
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH 2/2] dt-bindings: arm: fsl: Add support for ZII i.MX7 RMU2 board
  2019-06-14  8:03 [PATCH 1/2] ARM: dts: Add ZII support for ZII i.MX7 RMU2 board Andrey Smirnov
@ 2019-06-14  8:03 ` " Andrey Smirnov
  2019-06-16 23:21   ` Fabio Estevam
  2019-06-17 14:32   ` Rob Herring
  2019-06-14 16:52 ` [PATCH 1/2] ARM: dts: Add ZII " Andrey Smirnov
  2019-06-16 23:30 ` Fabio Estevam
  2 siblings, 2 replies; 6+ messages in thread
From: Andrey Smirnov @ 2019-06-14  8:03 UTC (permalink / raw)
  To: linux-arm-kernel
  Cc: Rob Herring, Liang Pan, Andrey Smirnov, Shawn Guo, linux-kernel,
	devicetree, Bob Langer, Fabio Estevam, Chris Healy, Lucas Stach

Add support for ZII i.MX7 RMU2 board.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Bob Langer <Bob.Langer@zii.aero>
Cc: Liang Pan <Liang.Pan@zii.aero>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 407138ebc0d0..8fb4dc1d55e7 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -158,6 +158,7 @@ properties:
               - fsl,imx7d-sdb             # i.MX7 SabreSD Board
               - tq,imx7d-mba7             # i.MX7D TQ MBa7 with TQMa7D SoM
               - zii,imx7d-rpu2            # ZII RPU2 Board
+              - zii,imx7d-rmu2            # ZII RMU2 Board
           - const: fsl,imx7d
 
       - description:
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH 1/2] ARM: dts: Add ZII support for ZII i.MX7 RMU2 board
  2019-06-14  8:03 [PATCH 1/2] ARM: dts: Add ZII support for ZII i.MX7 RMU2 board Andrey Smirnov
  2019-06-14  8:03 ` [PATCH 2/2] dt-bindings: arm: fsl: Add " Andrey Smirnov
@ 2019-06-14 16:52 ` " Andrey Smirnov
  2019-06-16 23:30 ` Fabio Estevam
  2 siblings, 0 replies; 6+ messages in thread
From: Andrey Smirnov @ 2019-06-14 16:52 UTC (permalink / raw)
  To: linux-arm-kernel
  Cc: Rob Herring, Liang Pan, Shawn Guo, linux-kernel,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Chris Healy, Fabio Estevam, Bob Langer, Lucas Stach

On Fri, Jun 14, 2019 at 1:03 AM Andrey Smirnov <andrew.smirnov@gmail.com> wrote:
>
> Add support for ZII's i.MX7 based Remote Modem Unit 2 (RMU2) board.
>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Chris Healy <cphealy@gmail.com>
> Cc: Lucas Stach <l.stach@pengutronix.de>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: Bob Langer <Bob.Langer@zii.aero>
> Cc: Liang Pan <Liang.Pan@zii.aero>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> ---
>  arch/arm/boot/dts/Makefile           |   1 +
>  arch/arm/boot/dts/imx7d-zii-rmu2.dts | 358 +++++++++++++++++++++++++++
>  2 files changed, 359 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx7d-zii-rmu2.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 5559028b770e..516e2912236d 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -593,6 +593,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
>         imx7d-sdb.dtb \
>         imx7d-sdb-reva.dtb \
>         imx7d-sdb-sht11.dtb \
> +       imx7d-zii-rmu2.dtb \
>         imx7d-zii-rpu2.dtb \
>         imx7s-colibri-eval-v3.dtb \
>         imx7s-mba7.dtb \
> diff --git a/arch/arm/boot/dts/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/imx7d-zii-rmu2.dts
> new file mode 100644
> index 000000000000..10fdafe5e0e4
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx7d-zii-rmu2.dts
> @@ -0,0 +1,358 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Device tree file for ZII's RMU2 board
> + *
> + * RMU - Remote Modem Unit
> + *
> + * Copyright (C) 2019 Zodiac Inflight Innovations
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/thermal/thermal.h>
> +#include "imx7d.dtsi"
> +
> +/ {
> +       model = "ZII RMU2 Board";
> +       compatible = "zii,imx7d-rmu2", "fsl,imx7d";
> +
> +       chosen {
> +               stdout-path = &uart2;
> +       };
> +
> +       gpio-leds {
> +               compatible = "gpio-leds";
> +               pinctrl-0 = <&pinctrl_leds_debug>;
> +               pinctrl-names = "default";
> +
> +               debug {
> +                       label = "zii:green:debug1";
> +                       gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
> +                       linux,default-trigger = "heartbeat";
> +               };
> +       };
> +};
> +
> +&cpu0 {
> +       arm-supply = <&sw1a_reg>;
> +};
> +
> +&ecspi1 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_ecspi1>;
> +       cs-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>;
> +       status = "okay";
> +
> +       flash@0 {
> +               compatible = "jedec,spi-nor";
> +               spi-max-frequency = <20000000>;
> +               reg = <0>;
> +               #address-cells = <1>;
> +               #size-cells = <1>;
> +       };
> +};
> +
> +&fec1 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_enet1>;
> +       assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
> +                         <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
> +       assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
> +       assigned-clock-rates = <0>, <100000000>;
> +       phy-mode = "rgmii";
> +       phy-handle = <&fec1_phy>;
> +       status = "okay";
> +
> +       mdio {

Ugh, missed

#address-cells = <1>;
#size-cells = <0>;

here. Will fix in v2.

Thanks,
Andrey Smirnov

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH 2/2] dt-bindings: arm: fsl: Add support for ZII i.MX7 RMU2 board
  2019-06-14  8:03 ` [PATCH 2/2] dt-bindings: arm: fsl: Add " Andrey Smirnov
@ 2019-06-16 23:21   ` Fabio Estevam
  2019-06-17 14:32   ` Rob Herring
  1 sibling, 0 replies; 6+ messages in thread
From: Fabio Estevam @ 2019-06-16 23:21 UTC (permalink / raw)
  To: Andrey Smirnov
  Cc: moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
	Rob Herring, Liang Pan, linux-kernel,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Chris Healy, Shawn Guo, Bob Langer, Lucas Stach

Hi Andrey,

On Fri, Jun 14, 2019 at 5:03 AM Andrey Smirnov <andrew.smirnov@gmail.com> wrote:

> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> index 407138ebc0d0..8fb4dc1d55e7 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -158,6 +158,7 @@ properties:
>                - fsl,imx7d-sdb             # i.MX7 SabreSD Board
>                - tq,imx7d-mba7             # i.MX7D TQ MBa7 with TQMa7D SoM
>                - zii,imx7d-rpu2            # ZII RPU2 Board
> +              - zii,imx7d-rmu2            # ZII RMU2 Board

Nit: Please keep the entries in alphabetical order.

Other than that:

Reviewed-by: Fabio Estevam <festevam@gmail.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH 1/2] ARM: dts: Add ZII support for ZII i.MX7 RMU2 board
  2019-06-14  8:03 [PATCH 1/2] ARM: dts: Add ZII support for ZII i.MX7 RMU2 board Andrey Smirnov
  2019-06-14  8:03 ` [PATCH 2/2] dt-bindings: arm: fsl: Add " Andrey Smirnov
  2019-06-14 16:52 ` [PATCH 1/2] ARM: dts: Add ZII " Andrey Smirnov
@ 2019-06-16 23:30 ` Fabio Estevam
  2 siblings, 0 replies; 6+ messages in thread
From: Fabio Estevam @ 2019-06-16 23:30 UTC (permalink / raw)
  To: Andrey Smirnov
  Cc: moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
	Rob Herring, Liang Pan, linux-kernel,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Chris Healy, Shawn Guo, Bob Langer, Lucas Stach

Hi Andrey,

On Fri, Jun 14, 2019 at 5:03 AM Andrey Smirnov <andrew.smirnov@gmail.com> wrote:

> +       mdio {
> +               fec1_phy: phy@0 {
> +                       pinctrl-names = "default";
> +                       pinctrl-0 = <&pinctrl_enet1_phy_reset>,
> +                                   <&pinctrl_enet1_phy_interrupt>;
> +                       reg = <0>;
> +                       interrupt-parent = <&gpio1>;
> +                       interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> +                       reset-gpio = <&gpio5 11 GPIO_ACTIVE_LOW>;

According to Documentation/devicetree/bindings/net/mdio.txt this
should be reset-gpios instead.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH 2/2] dt-bindings: arm: fsl: Add support for ZII i.MX7 RMU2 board
  2019-06-14  8:03 ` [PATCH 2/2] dt-bindings: arm: fsl: Add " Andrey Smirnov
  2019-06-16 23:21   ` Fabio Estevam
@ 2019-06-17 14:32   ` Rob Herring
  1 sibling, 0 replies; 6+ messages in thread
From: Rob Herring @ 2019-06-17 14:32 UTC (permalink / raw)
  To: Andrey Smirnov
  Cc: moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
	devicetree, Liang Pan, Shawn Guo, linux-kernel, Chris Healy,
	Fabio Estevam, Bob Langer, Lucas Stach

On Fri, Jun 14, 2019 at 2:03 AM Andrey Smirnov <andrew.smirnov@gmail.com> wrote:
>
> Add support for ZII i.MX7 RMU2 board.
>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Chris Healy <cphealy@gmail.com>
> Cc: Lucas Stach <l.stach@pengutronix.de>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: Bob Langer <Bob.Langer@zii.aero>
> Cc: Liang Pan <Liang.Pan@zii.aero>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> ---
>  Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
>  1 file changed, 1 insertion(+)

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, back to index

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-14  8:03 [PATCH 1/2] ARM: dts: Add ZII support for ZII i.MX7 RMU2 board Andrey Smirnov
2019-06-14  8:03 ` [PATCH 2/2] dt-bindings: arm: fsl: Add " Andrey Smirnov
2019-06-16 23:21   ` Fabio Estevam
2019-06-17 14:32   ` Rob Herring
2019-06-14 16:52 ` [PATCH 1/2] ARM: dts: Add ZII " Andrey Smirnov
2019-06-16 23:30 ` Fabio Estevam

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org infradead-linux-arm-kernel@archiver.kernel.org
	public-inbox-index linux-arm-kernel


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox