linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Anson.Huang@nxp.com
To: robh+dt@kernel.org, mark.rutland@arm.com, corbet@lwn.net,
	shawnguo@kernel.org, s.hauer@pengutronix.de,
	kernel@pengutronix.de, festevam@gmail.com,
	catalin.marinas@arm.com, will.deacon@arm.com,
	rui.zhang@intel.com, edubezval@gmail.com,
	daniel.lezcano@linaro.org, aisheng.dong@nxp.com,
	ulf.hansson@linaro.org, peng.fan@nxp.com,
	mchehab+samsung@kernel.org, linux@roeck-us.net,
	daniel.baluta@nxp.com, maxime.ripard@bootlin.com,
	horms+renesas@verge.net.au, olof@lixom.net,
	jagan@amarulasolutions.com, bjorn.andersson@linaro.org,
	leonard.crestez@nxp.com, dinguyen@kernel.org,
	enric.balletbo@collabora.com, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org
Cc: Linux-imx@nxp.com
Subject: [PATCH V15 3/5] thermal: imx_sc: add i.MX system controller thermal support
Date: Tue, 18 Jun 2019 10:18:18 +0800	[thread overview]
Message-ID: <20190618021820.14885-3-Anson.Huang@nxp.com> (raw)
In-Reply-To: <20190618021820.14885-1-Anson.Huang@nxp.com>

From: Anson Huang <Anson.Huang@nxp.com>

i.MX8QXP is an ARMv8 SoC which has a Cortex-M4 system controller
inside, the system controller is in charge of controlling power,
clock and thermal sensors etc..

This patch adds i.MX system controller thermal driver support,
Linux kernel has to communicate with system controller via MU
(message unit) IPC to get each thermal sensor's temperature,
it supports multiple sensors which are passed from device tree,
please see the binding doc for details.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No change.
---
 drivers/thermal/Kconfig          |  11 +++
 drivers/thermal/Makefile         |   1 +
 drivers/thermal/imx_sc_thermal.c | 142 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 154 insertions(+)
 create mode 100644 drivers/thermal/imx_sc_thermal.c

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 9966364..454cbe5 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -233,6 +233,17 @@ config IMX_THERMAL
 	  cpufreq is used as the cooling device to throttle CPUs when the
 	  passive trip is crossed.
 
+config IMX_SC_THERMAL
+	tristate "Temperature sensor driver for NXP i.MX SoCs with System Controller"
+	depends on ARCH_MXC && IMX_SCU
+	depends on OF
+	help
+	  Support for Temperature Monitor (TEMPMON) found on NXP i.MX SoCs with
+	  system controller inside, Linux kernel has to communicate with system
+	  controller via MU (message unit) IPC to get temperature from thermal
+	  sensor. It supports one critical trip point and one
+	  passive trip point for each thermal sensor.
+
 config MAX77620_THERMAL
 	tristate "Temperature sensor driver for Maxim MAX77620 PMIC"
 	depends on MFD_MAX77620
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 74a37c7..717a1ba 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_DB8500_THERMAL)	+= db8500_thermal.o
 obj-$(CONFIG_ARMADA_THERMAL)	+= armada_thermal.o
 obj-$(CONFIG_TANGO_THERMAL)	+= tango_thermal.o
 obj-$(CONFIG_IMX_THERMAL)	+= imx_thermal.o
+obj-$(CONFIG_IMX_SC_THERMAL)	+= imx_sc_thermal.o
 obj-$(CONFIG_MAX77620_THERMAL)	+= max77620_thermal.o
 obj-$(CONFIG_QORIQ_THERMAL)	+= qoriq_thermal.o
 obj-$(CONFIG_DA9062_THERMAL)	+= da9062-thermal.o
diff --git a/drivers/thermal/imx_sc_thermal.c b/drivers/thermal/imx_sc_thermal.c
new file mode 100644
index 0000000..d406ecb
--- /dev/null
+++ b/drivers/thermal/imx_sc_thermal.c
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP.
+ */
+
+#include <linux/err.h>
+#include <linux/firmware/imx/sci.h>
+#include <linux/firmware/imx/types.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+
+#include "thermal_core.h"
+
+#define IMX_SC_MISC_FUNC_GET_TEMP	13
+
+static struct imx_sc_ipc *thermal_ipc_handle;
+
+struct imx_sc_sensor {
+	struct thermal_zone_device *tzd;
+	u32 resource_id;
+};
+
+struct req_get_temp {
+	u16 resource_id;
+	u8 type;
+} __packed;
+
+struct resp_get_temp {
+	u16 celsius;
+	u8 tenths;
+} __packed;
+
+struct imx_sc_msg_misc_get_temp {
+	struct imx_sc_rpc_msg hdr;
+	union {
+		struct req_get_temp req;
+		struct resp_get_temp resp;
+	} data;
+};
+
+static int imx_sc_thermal_get_temp(void *data, int *temp)
+{
+	struct imx_sc_msg_misc_get_temp msg;
+	struct imx_sc_rpc_msg *hdr = &msg.hdr;
+	struct imx_sc_sensor *sensor = data;
+	int ret;
+
+	msg.data.req.resource_id = sensor->resource_id;
+	msg.data.req.type = IMX_SC_C_TEMP;
+
+	hdr->ver = IMX_SC_RPC_VERSION;
+	hdr->svc = IMX_SC_RPC_SVC_MISC;
+	hdr->func = IMX_SC_MISC_FUNC_GET_TEMP;
+	hdr->size = 2;
+
+	ret = imx_scu_call_rpc(thermal_ipc_handle, &msg, true);
+	if (ret) {
+		dev_err(&sensor->tzd->device, "read temp sensor %d failed, ret %d\n",
+			sensor->resource_id, ret);
+		return ret;
+	}
+
+	*temp = msg.data.resp.celsius * 1000 + msg.data.resp.tenths * 100;
+
+	return 0;
+}
+
+static const struct thermal_zone_of_device_ops imx_sc_thermal_ops = {
+	.get_temp = imx_sc_thermal_get_temp,
+};
+
+static int imx_sc_thermal_probe(struct platform_device *pdev)
+{
+	struct device_node *np, *child, *sensor_np;
+	struct imx_sc_sensor *sensor;
+	int ret;
+
+	ret = imx_scu_get_handle(&thermal_ipc_handle);
+	if (ret)
+		return ret;
+
+	np = of_find_node_by_name(NULL, "thermal-zones");
+	if (!np)
+		return -ENODEV;
+
+	sensor_np = of_node_get(pdev->dev.of_node);
+
+	for_each_available_child_of_node(np, child) {
+		sensor = devm_kzalloc(&pdev->dev, sizeof(*sensor), GFP_KERNEL);
+		if (!sensor) {
+			of_node_put(sensor_np);
+			return -ENOMEM;
+		}
+
+		ret = thermal_zone_of_get_sensor_id(child,
+						    sensor_np,
+						    &sensor->resource_id);
+		if (ret < 0) {
+			dev_err(&pdev->dev,
+				"failed to get valid sensor resource id: %d\n",
+				ret);
+			break;
+		}
+
+		sensor->tzd = devm_thermal_zone_of_sensor_register(&pdev->dev,
+								   sensor->resource_id,
+								   sensor,
+								   &imx_sc_thermal_ops);
+		if (IS_ERR(sensor->tzd)) {
+			dev_err(&pdev->dev, "failed to register thermal zone\n");
+			ret = PTR_ERR(sensor->tzd);
+			break;
+		}
+	}
+
+	of_node_put(sensor_np);
+
+	return ret;
+}
+
+static const struct of_device_id imx_sc_thermal_table[] = {
+	{ .compatible = "fsl,imx-sc-thermal", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, imx_sc_thermal_table);
+
+static struct platform_driver imx_sc_thermal_driver = {
+		.probe = imx_sc_thermal_probe,
+		.driver = {
+			.name = "imx-sc-thermal",
+			.of_match_table = imx_sc_thermal_table,
+		},
+};
+module_platform_driver(imx_sc_thermal_driver);
+
+MODULE_AUTHOR("Anson Huang <Anson.Huang@nxp.com>");
+MODULE_DESCRIPTION("Thermal driver for NXP i.MX SoCs with system controller");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-06-18  2:17 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-18  2:18 [PATCH V15 1/5] dt-bindings: fsl: scu: add thermal binding Anson.Huang
2019-06-18  2:18 ` [PATCH V15 2/5] thermal: of-thermal: add API for getting sensor ID from DT Anson.Huang
2019-06-18  2:18 ` Anson.Huang [this message]
2019-06-18  2:18 ` [PATCH V15 4/5] defconfig: arm64: add i.MX system controller thermal support Anson.Huang
2019-06-18  2:18 ` [PATCH V15 5/5] arm64: dts: imx: add i.MX8QXP " Anson.Huang
2019-06-24  8:04 ` [PATCH V15 1/5] dt-bindings: fsl: scu: add thermal binding Anson Huang
2019-07-24  3:16   ` Anson Huang
2019-08-28  9:14     ` Zhang Rui
2019-08-28  9:20       ` Anson Huang
2019-10-23  2:37     ` Anson Huang
2020-02-19 14:21       ` Anson Huang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190618021820.14885-3-Anson.Huang@nxp.com \
    --to=anson.huang@nxp.com \
    --cc=Linux-imx@nxp.com \
    --cc=aisheng.dong@nxp.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=catalin.marinas@arm.com \
    --cc=corbet@lwn.net \
    --cc=daniel.baluta@nxp.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dinguyen@kernel.org \
    --cc=edubezval@gmail.com \
    --cc=enric.balletbo@collabora.com \
    --cc=festevam@gmail.com \
    --cc=horms+renesas@verge.net.au \
    --cc=jagan@amarulasolutions.com \
    --cc=kernel@pengutronix.de \
    --cc=leonard.crestez@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=mchehab+samsung@kernel.org \
    --cc=olof@lixom.net \
    --cc=peng.fan@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=ulf.hansson@linaro.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).