Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2 0/2] arm64: dts: renesas: r8a7799[05]: Add cpg reset for LVDS Interface
@ 2019-06-17  8:37 Simon Horman
  2019-06-17  8:37 ` [PATCH v2 1/2] arm64: dts: renesas: r8a77990: " Simon Horman
  2019-06-17  8:37 ` [PATCH v2 2/2] arm64: dts: renesas: r8a77995: " Simon Horman
  0 siblings, 2 replies; 7+ messages in thread
From: Simon Horman @ 2019-06-17  8:37 UTC (permalink / raw)
  To: linux-renesas-soc
  Cc: Yoshihiro Kaneko, Magnus Damm, Geert Uytterhoeven,
	Laurent Pinchart, Simon Horman, linux-arm-kernel

Hi,

this short series adds CPG reset for LVS interfaces of the
R-Car E3 (r8a77995) and D3 (r8a77990) SoCs.

Changes since v1
- only add one reset entry per group

Takeshi Kihara (1):
  arm64: dts: renesas: r8a77990: Add cpg reset for LVDS Interface

Yoshihiro Kaneko (1):
  arm64: dts: renesas: r8a77995: Add cpg reset for LVDS Interface

 arch/arm64/boot/dts/renesas/r8a77990.dtsi | 2 ++
 arch/arm64/boot/dts/renesas/r8a77995.dtsi | 2 ++
 2 files changed, 4 insertions(+)

-- 
2.11.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v2 1/2] arm64: dts: renesas: r8a77990: Add cpg reset for LVDS Interface
  2019-06-17  8:37 [PATCH v2 0/2] arm64: dts: renesas: r8a7799[05]: Add cpg reset for LVDS Interface Simon Horman
@ 2019-06-17  8:37 ` " Simon Horman
  2019-06-17  8:43   ` Geert Uytterhoeven
  2019-06-17  8:37 ` [PATCH v2 2/2] arm64: dts: renesas: r8a77995: " Simon Horman
  1 sibling, 1 reply; 7+ messages in thread
From: Simon Horman @ 2019-06-17  8:37 UTC (permalink / raw)
  To: linux-renesas-soc
  Cc: Takeshi Kihara, Yoshihiro Kaneko, Magnus Damm,
	Geert Uytterhoeven, Laurent Pinchart, Simon Horman,
	linux-arm-kernel

From: Takeshi Kihara <takeshi.kihara.df@renesas.com>

It is necessary to reset the LVDS Interface according to display on/off.
Therefore, this patch adds CPG reset properties in DU device node
for the R8A77990 SoC.

According to Laurent Pinchart, R-Car Gen3 reset is handled at the group
level so specifying one reset entry per group is sufficient. For this
reason <&cpg 724> is not listed as a reset for "du.1" as was the case in an
earlier revision of this patch.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
v2 [Simon Horman]
- only add one reset entry per group

v1 [Yoshihiro Kaneko]

v0 [Takeshi Kihara]
---
 arch/arm64/boot/dts/renesas/r8a77990.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index b4318661f35e..84d1f58e73e7 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -1766,6 +1766,8 @@
 			clocks = <&cpg CPG_MOD 724>,
 				 <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
 			vsps = <&vspd0 0 &vspd1 0>;
 			status = "disabled";
 
-- 
2.11.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v2 2/2] arm64: dts: renesas: r8a77995: Add cpg reset for LVDS Interface
  2019-06-17  8:37 [PATCH v2 0/2] arm64: dts: renesas: r8a7799[05]: Add cpg reset for LVDS Interface Simon Horman
  2019-06-17  8:37 ` [PATCH v2 1/2] arm64: dts: renesas: r8a77990: " Simon Horman
@ 2019-06-17  8:37 ` " Simon Horman
  2019-06-17  8:43   ` Geert Uytterhoeven
  1 sibling, 1 reply; 7+ messages in thread
From: Simon Horman @ 2019-06-17  8:37 UTC (permalink / raw)
  To: linux-renesas-soc
  Cc: Yoshihiro Kaneko, Magnus Damm, Geert Uytterhoeven,
	Laurent Pinchart, Simon Horman, linux-arm-kernel

From: Yoshihiro Kaneko <ykaneko0929@gmail.com>

It is necessary to reset the LVDS Interface according to display on/off.
Therefore, this patch adds CPG reset properties in DU device node
for the R8A77995 SoC.

This patch was inspired by a patch in the BSP by Takeshi Kihara
<takeshi.kihara.df@renesas.com>.

According to Laurent Pinchart, R-Car Gen3 reset is handled at the group
level so specifying one reset entry per group is sufficient. For
this reason <&cpg 724> is not listed as a reset for "du.1" as
was the case in an earlier revision of this patch.

Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
v2 [Simon Horman]
- only add one reset entry per group

v1 [Yoshihiro Kaneko]
---
 arch/arm64/boot/dts/renesas/r8a77995.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index 0a344eb55094..ca6aeabd6d04 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -1001,6 +1001,8 @@
 			clocks = <&cpg CPG_MOD 724>,
 				 <&cpg CPG_MOD 723>;
 			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
 			vsps = <&vspd0 0 &vspd1 0>;
 			status = "disabled";
 
-- 
2.11.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v2 1/2] arm64: dts: renesas: r8a77990: Add cpg reset for LVDS Interface
  2019-06-17  8:37 ` [PATCH v2 1/2] arm64: dts: renesas: r8a77990: " Simon Horman
@ 2019-06-17  8:43   ` Geert Uytterhoeven
  2019-06-18 10:44     ` Simon Horman
  0 siblings, 1 reply; 7+ messages in thread
From: Geert Uytterhoeven @ 2019-06-17  8:43 UTC (permalink / raw)
  To: Simon Horman
  Cc: Takeshi Kihara, Yoshihiro Kaneko, Magnus Damm, Linux-Renesas,
	Laurent Pinchart, Linux ARM

Hi Simon,

On Mon, Jun 17, 2019 at 10:37 AM Simon Horman
<horms+renesas@verge.net.au> wrote:
> From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
>
> It is necessary to reset the LVDS Interface according to display on/off.

This is not the LVDS interface.
The LVDS interface has its own device node.

> Therefore, this patch adds CPG reset properties in DU device node
> for the R8A77990 SoC.
>
> According to Laurent Pinchart, R-Car Gen3 reset is handled at the group
> level so specifying one reset entry per group is sufficient. For this
> reason <&cpg 724> is not listed as a reset for "du.1" as was the case in an
> earlier revision of this patch.
>
> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> ---
> v2 [Simon Horman]
> - only add one reset entry per group
>
> v1 [Yoshihiro Kaneko]
>
> v0 [Takeshi Kihara]
> ---
>  arch/arm64/boot/dts/renesas/r8a77990.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> index b4318661f35e..84d1f58e73e7 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> @@ -1766,6 +1766,8 @@
>                         clocks = <&cpg CPG_MOD 724>,
>                                  <&cpg CPG_MOD 723>;
>                         clock-names = "du.0", "du.1";
> +                       resets = <&cpg 724>;
> +                       reset-names = "du.0";
>                         vsps = <&vspd0 0 &vspd1 0>;
>                         status = "disabled";

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v2 2/2] arm64: dts: renesas: r8a77995: Add cpg reset for LVDS Interface
  2019-06-17  8:37 ` [PATCH v2 2/2] arm64: dts: renesas: r8a77995: " Simon Horman
@ 2019-06-17  8:43   ` Geert Uytterhoeven
  0 siblings, 0 replies; 7+ messages in thread
From: Geert Uytterhoeven @ 2019-06-17  8:43 UTC (permalink / raw)
  To: Simon Horman
  Cc: Linux-Renesas, Yoshihiro Kaneko, Magnus Damm, Laurent Pinchart,
	Linux ARM

Hi Simon,

On Mon, Jun 17, 2019 at 10:37 AM Simon Horman
<horms+renesas@verge.net.au> wrote:
> From: Yoshihiro Kaneko <ykaneko0929@gmail.com>
>
> It is necessary to reset the LVDS Interface according to display on/off.

This is not the LVDS interface.
The LVDS interface has its own device node.

> Therefore, this patch adds CPG reset properties in DU device node
> for the R8A77995 SoC.
>
> This patch was inspired by a patch in the BSP by Takeshi Kihara
> <takeshi.kihara.df@renesas.com>.
>
> According to Laurent Pinchart, R-Car Gen3 reset is handled at the group
> level so specifying one reset entry per group is sufficient. For
> this reason <&cpg 724> is not listed as a reset for "du.1" as
> was the case in an earlier revision of this patch.
>
> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> ---
> v2 [Simon Horman]
> - only add one reset entry per group
>
> v1 [Yoshihiro Kaneko]

> --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
> @@ -1001,6 +1001,8 @@
>                         clocks = <&cpg CPG_MOD 724>,
>                                  <&cpg CPG_MOD 723>;
>                         clock-names = "du.0", "du.1";
> +                       resets = <&cpg 724>;
> +                       reset-names = "du.0";
>                         vsps = <&vspd0 0 &vspd1 0>;
>                         status = "disabled";

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v2 1/2] arm64: dts: renesas: r8a77990: Add cpg reset for LVDS Interface
  2019-06-17  8:43   ` Geert Uytterhoeven
@ 2019-06-18 10:44     ` Simon Horman
  2019-06-18 11:19       ` Geert Uytterhoeven
  0 siblings, 1 reply; 7+ messages in thread
From: Simon Horman @ 2019-06-18 10:44 UTC (permalink / raw)
  To: Geert Uytterhoeven
  Cc: Takeshi Kihara, Yoshihiro Kaneko, Magnus Damm, Linux-Renesas,
	Laurent Pinchart, Linux ARM

On Mon, Jun 17, 2019 at 10:43:09AM +0200, Geert Uytterhoeven wrote:
> Hi Simon,
> 
> On Mon, Jun 17, 2019 at 10:37 AM Simon Horman
> <horms+renesas@verge.net.au> wrote:
> > From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> >
> > It is necessary to reset the LVDS Interface according to display on/off.
> 
> This is not the LVDS interface.
> The LVDS interface has its own device node.

Thanks, how about a changelog more like this?

arm64: dts: renesas: r8a77990: Add cpg reset for DU

Add CPG reset properties to DU node of E3 (r8a77990) SoC.

According to Laurent Pinchart, R-Car Gen3 reset is handled at the group
level so specifying one reset entry per group is sufficient. For this
reason <&cpg 724> is not listed as a reset for "du.1" as was the case in an
earlier revision of this patch.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

> > Therefore, this patch adds CPG reset properties in DU device node
> > for the R8A77990 SoC.
> >
> > According to Laurent Pinchart, R-Car Gen3 reset is handled at the group
> > level so specifying one reset entry per group is sufficient. For this
> > reason <&cpg 724> is not listed as a reset for "du.1" as was the case in an
> > earlier revision of this patch.
> >
> > Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> > Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
> > Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> > ---
> > v2 [Simon Horman]
> > - only add one reset entry per group
> >
> > v1 [Yoshihiro Kaneko]
> >
> > v0 [Takeshi Kihara]
> > ---
> >  arch/arm64/boot/dts/renesas/r8a77990.dtsi | 2 ++
> >  1 file changed, 2 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> > index b4318661f35e..84d1f58e73e7 100644
> > --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> > @@ -1766,6 +1766,8 @@
> >                         clocks = <&cpg CPG_MOD 724>,
> >                                  <&cpg CPG_MOD 723>;
> >                         clock-names = "du.0", "du.1";
> > +                       resets = <&cpg 724>;
> > +                       reset-names = "du.0";
> >                         vsps = <&vspd0 0 &vspd1 0>;
> >                         status = "disabled";
> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> -- 
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
> 
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v2 1/2] arm64: dts: renesas: r8a77990: Add cpg reset for LVDS Interface
  2019-06-18 10:44     ` Simon Horman
@ 2019-06-18 11:19       ` Geert Uytterhoeven
  0 siblings, 0 replies; 7+ messages in thread
From: Geert Uytterhoeven @ 2019-06-18 11:19 UTC (permalink / raw)
  To: Simon Horman
  Cc: Takeshi Kihara, Yoshihiro Kaneko, Magnus Damm, Linux-Renesas,
	Laurent Pinchart, Linux ARM

Hi Simon,

On Tue, Jun 18, 2019 at 12:45 PM Simon Horman <horms@verge.net.au> wrote:
> On Mon, Jun 17, 2019 at 10:43:09AM +0200, Geert Uytterhoeven wrote:
> > On Mon, Jun 17, 2019 at 10:37 AM Simon Horman
> > <horms+renesas@verge.net.au> wrote:
> > > From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> > >
> > > It is necessary to reset the LVDS Interface according to display on/off.
> >
> > This is not the LVDS interface.
> > The LVDS interface has its own device node.
>
> Thanks, how about a changelog more like this?
>
> arm64: dts: renesas: r8a77990: Add cpg reset for DU
>
> Add CPG reset properties to DU node of E3 (r8a77990) SoC.

Thanks, much better.

> According to Laurent Pinchart, R-Car Gen3 reset is handled at the group
> level so specifying one reset entry per group is sufficient. For this
> reason <&cpg 724> is not listed as a reset for "du.1" as was the case in an
> earlier revision of this patch.

Do we need this last sentence?

Note that "dt-bindings: display: renesas: du: Document optional reset
properties"
hasn't been accepted in -next yet.

> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
>
> > > Therefore, this patch adds CPG reset properties in DU device node
> > > for the R8A77990 SoC.
> > >
> > > According to Laurent Pinchart, R-Car Gen3 reset is handled at the group
> > > level so specifying one reset entry per group is sufficient. For this
> > > reason <&cpg 724> is not listed as a reset for "du.1" as was the case in an
> > > earlier revision of this patch.
> > >
> > > Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> > > Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
> > > Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> > > ---
> > > v2 [Simon Horman]
> > > - only add one reset entry per group

> > > --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> > > +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> > > @@ -1766,6 +1766,8 @@
> > >                         clocks = <&cpg CPG_MOD 724>,
> > >                                  <&cpg CPG_MOD 723>;
> > >                         clock-names = "du.0", "du.1";
> > > +                       resets = <&cpg 724>;
> > > +                       reset-names = "du.0";
> > >                         vsps = <&vspd0 0 &vspd1 0>;
> > >                         status = "disabled";

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, back to index

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-17  8:37 [PATCH v2 0/2] arm64: dts: renesas: r8a7799[05]: Add cpg reset for LVDS Interface Simon Horman
2019-06-17  8:37 ` [PATCH v2 1/2] arm64: dts: renesas: r8a77990: " Simon Horman
2019-06-17  8:43   ` Geert Uytterhoeven
2019-06-18 10:44     ` Simon Horman
2019-06-18 11:19       ` Geert Uytterhoeven
2019-06-17  8:37 ` [PATCH v2 2/2] arm64: dts: renesas: r8a77995: " Simon Horman
2019-06-17  8:43   ` Geert Uytterhoeven

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org infradead-linux-arm-kernel@archiver.kernel.org
	public-inbox-index linux-arm-kernel


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox