Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Kukjin Kim <kgene@kernel.org>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will.deacon@arm.com>,
	Sylwester Nawrocki <s.nawrocki@samsung.com>,
	Tomasz Figa <tomasz.figa@gmail.com>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Marek Szyprowski <m.szyprowski@samsung.com>,
	Olof Johansson <olof@lixom.net>,
	dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org, linux-clk@vger.kernel.org
Cc: Joseph Kogut <joseph.kogut@gmail.com>,
	Inki Dae <inki.dae@samsung.com>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Arnd Bergmann <arnd@arndb.de>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Subject: [RFT 04/10] ARM: dts: exynos: Add GPU/Mali 400 node to Exynos3250
Date: Tue, 18 Jun 2019 21:05:28 +0200
Message-ID: <20190618190534.4951-5-krzk@kernel.org> (raw)
In-Reply-To: <20190618190534.4951-1-krzk@kernel.org>

Add nodes for GPU (Mali 400) to Exynos3250.  This is still limited and
not tested:
1. No dynamic voltage and frequency scaling,
2. Not sure what to do with CLK_G3D clock responsible for gating entire
   IP block (it is now being disabled as unused).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos3250-artik5.dtsi |  5 ++++
 arch/arm/boot/dts/exynos3250-monk.dts    |  5 ++++
 arch/arm/boot/dts/exynos3250-rinato.dts  |  5 ++++
 arch/arm/boot/dts/exynos3250.dtsi        | 33 ++++++++++++++++++++++++
 4 files changed, 48 insertions(+)

diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index ace50e194a45..dee35e3a5c4b 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -59,6 +59,11 @@
 	cpu0-supply = <&buck2_reg>;
 };
 
+&gpu {
+	mali-supply = <&buck3_reg>;
+	status = "okay";
+};
+
 &i2c_0 {
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index e25765500e99..248bd372fe70 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -172,6 +172,11 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&buck3_reg>;
+	status = "okay";
+};
+
 &hsotg {
 	vusb_d-supply = <&ldo15_reg>;
 	vusb_a-supply = <&ldo12_reg>;
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 7479993755da..86c26a4edfd7 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -244,6 +244,11 @@
 	};
 };
 
+&gpu {
+	mali-supply = <&buck3_reg>;
+	status = "okay";
+};
+
 &i2c_0 {
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 8ce3a7786b19..c5f37618f329 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -126,6 +126,39 @@
 		};
 	};
 
+	gpu: gpu@13000000 {
+		compatible = "samsung,exynos3250-mali", "arm,mali-400";
+		reg = <0x13000000 0x10000>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp",
+				  "gpmmu",
+				  "pp0",
+				  "ppmmu0",
+				  "pp1",
+				  "ppmmu1",
+				  "pp2",
+				  "ppmmu2",
+				  "pp3",
+				  "ppmmu3",
+				  "pmu";
+		clocks = <&cmu CLK_ASYNC_G3D>,
+			 <&cmu CLK_SCLK_G3D>;
+		clock-names = "bus", "core";
+		power-domains = <&pd_g3d>;
+		status = "disabled";
+		/* TODO: operating points for DVFS */
+	};
+
 	pmu {
 		compatible = "arm,cortex-a7-pmu";
 		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply index

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-18 19:05 [RFT 00/10] ARM/arm64: dts: exynos: Add support for Mali Krzysztof Kozlowski
2019-06-18 19:05 ` [RFT 01/10] dt-bindings: gpu: mali: Add Samsung compatibles for Midgard and Utgard Krzysztof Kozlowski
2019-06-19 10:01   ` Marek Szyprowski
2019-06-19 10:08     ` Krzysztof Kozlowski
2019-06-19 10:17       ` Marek Szyprowski
2019-06-18 19:05 ` [RFT 02/10] clk: samsung: Add bus clock for GPU/G3D on Exynos4412 Krzysztof Kozlowski
2019-06-19  9:17   ` Sylwester Nawrocki
2019-06-18 19:05 ` [RFT 03/10] ARM: dts: exynos: Fix language typo and indentation Krzysztof Kozlowski
2019-06-18 19:05 ` Krzysztof Kozlowski [this message]
2019-06-18 19:05 ` [RFT 05/10] ARM: dts: exynos: Add GPU/Mali 400 node to Exynos4 Krzysztof Kozlowski
2019-06-18 19:05 ` [RFT 06/10] arm64: dts: exynos: Add GPU/Mali T760 node to Exynos5433 Krzysztof Kozlowski
2019-06-18 19:05 ` [RFT 07/10] arm64: dts: exynos: Add GPU/Mali T760 node to Exynos7 Krzysztof Kozlowski
2019-06-18 19:05 ` [RFT 08/10] ARM: multi_v7_defconfig: Enable Panfrost and LIMA drivers Krzysztof Kozlowski
2019-06-18 19:05 ` [RFT 09/10] ARM: exynos_defconfig: " Krzysztof Kozlowski
2019-06-18 19:05 ` [RFT 10/10] arm64: defconfig: Enable Panfrost driver Krzysztof Kozlowski

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190618190534.4951-5-krzk@kernel.org \
    --to=krzk@kernel.org \
    --cc=airlied@linux.ie \
    --cc=arnd@arndb.de \
    --cc=b.zolnierkie@samsung.com \
    --cc=catalin.marinas@arm.com \
    --cc=cw00.choi@samsung.com \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=inki.dae@samsung.com \
    --cc=joseph.kogut@gmail.com \
    --cc=kgene@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=olof@lixom.net \
    --cc=robh+dt@kernel.org \
    --cc=s.nawrocki@samsung.com \
    --cc=sboyd@kernel.org \
    --cc=tomasz.figa@gmail.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org infradead-linux-arm-kernel@archiver.kernel.org
	public-inbox-index linux-arm-kernel


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox