linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Vignesh Raghavendra <vigneshr@ti.com>
To: Vignesh Raghavendra <vigneshr@ti.com>,
	Boris Brezillon <bbrezillon@kernel.org>,
	Marek Vasut <marek.vasut@gmail.com>,
	Richard Weinberger <richard@nod.at>,
	Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org,
	Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>,
	Tokunori Ikegami <ikegami.t@gmail.com>,
	linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Mason Yang <masonccyang@mxic.com.tw>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 5/5] mtd: hyperbus: Add driver for TI's HyperBus memory controller
Date: Tue, 25 Jun 2019 13:27:46 +0530	[thread overview]
Message-ID: <20190625075746.10439-6-vigneshr@ti.com> (raw)
In-Reply-To: <20190625075746.10439-1-vigneshr@ti.com>

Add driver for HyperBus memory controller on TI's AM654 SoC. Programming
IP is pretty simple and provides direct memory mapped access to
connected Flash devices.

Add basic support for the IP without DMA. Second chipSelect is not
supported for now.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
v8:
No change

 drivers/mtd/hyperbus/Kconfig      |  12 +++
 drivers/mtd/hyperbus/Makefile     |   1 +
 drivers/mtd/hyperbus/hbmc-am654.c | 141 ++++++++++++++++++++++++++++++
 3 files changed, 154 insertions(+)
 create mode 100644 drivers/mtd/hyperbus/hbmc-am654.c

diff --git a/drivers/mtd/hyperbus/Kconfig b/drivers/mtd/hyperbus/Kconfig
index 98147e28caa0..cff6bbd226f5 100644
--- a/drivers/mtd/hyperbus/Kconfig
+++ b/drivers/mtd/hyperbus/Kconfig
@@ -9,3 +9,15 @@ menuconfig MTD_HYPERBUS
 	  the HyperBus Controller driver to communicate with
 	  HyperFlash. See Cypress HyperBus specification for more
 	  details
+
+if MTD_HYPERBUS
+
+config HBMC_AM654
+	tristate "HyperBus controller driver for AM65x SoC"
+	select MULTIPLEXER
+	select MUX_MMIO
+	help
+	 This is the driver for HyperBus controller on TI's AM65x and
+	 other SoCs
+
+endif # MTD_HYPERBUS
diff --git a/drivers/mtd/hyperbus/Makefile b/drivers/mtd/hyperbus/Makefile
index ca61dedd730d..8a936e066f48 100644
--- a/drivers/mtd/hyperbus/Makefile
+++ b/drivers/mtd/hyperbus/Makefile
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
 
 obj-$(CONFIG_MTD_HYPERBUS)	+= hyperbus-core.o
+obj-$(CONFIG_HBMC_AM654)	+= hbmc-am654.o
diff --git a/drivers/mtd/hyperbus/hbmc-am654.c b/drivers/mtd/hyperbus/hbmc-am654.c
new file mode 100644
index 000000000000..ca3fe198169e
--- /dev/null
+++ b/drivers/mtd/hyperbus/hbmc-am654.c
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+// Author: Vignesh Raghavendra <vigneshr@ti.com>
+
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtd/cfi.h>
+#include <linux/mtd/hyperbus.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mux/consumer.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/types.h>
+
+#define AM654_HBMC_CALIB_COUNT 25
+
+struct am654_hbmc_priv {
+	struct hyperbus_ctlr ctlr;
+	struct hyperbus_device hbdev;
+};
+
+static int am654_hbmc_calibrate(struct hyperbus_device *hbdev)
+{
+	struct map_info *map = &hbdev->map;
+	struct cfi_private cfi;
+	int count = AM654_HBMC_CALIB_COUNT;
+	int pass_count = 0;
+	int ret;
+
+	cfi.interleave = 1;
+	cfi.device_type = CFI_DEVICETYPE_X16;
+	cfi_send_gen_cmd(0xF0, 0, 0, map, &cfi, cfi.device_type, NULL);
+	cfi_send_gen_cmd(0x98, 0x55, 0, map, &cfi, cfi.device_type, NULL);
+
+	while (count--) {
+		ret = cfi_qry_present(map, 0, &cfi);
+		if (ret)
+			pass_count++;
+		else
+			pass_count = 0;
+		if (pass_count == 5)
+			break;
+	}
+
+	cfi_qry_mode_off(0, map, &cfi);
+
+	return ret;
+}
+
+static const struct hyperbus_ops am654_hbmc_ops = {
+	.calibrate = am654_hbmc_calibrate,
+};
+
+static int am654_hbmc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct am654_hbmc_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, priv);
+
+	if (of_property_read_bool(dev->of_node, "mux-controls")) {
+		struct mux_control *control = devm_mux_control_get(dev, NULL);
+
+		if (IS_ERR(control))
+			return PTR_ERR(control);
+
+		ret = mux_control_select(control, 1);
+		if (ret) {
+			dev_err(dev, "Failed to select HBMC mux\n");
+			return ret;
+		}
+	}
+
+	pm_runtime_enable(dev);
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(dev);
+		goto disable_pm;
+	}
+
+	priv->ctlr.dev = dev;
+	priv->ctlr.ops = &am654_hbmc_ops;
+	priv->hbdev.ctlr = &priv->ctlr;
+	priv->hbdev.np = of_get_next_child(dev->of_node, NULL);
+	ret = hyperbus_register_device(&priv->hbdev);
+	if (ret) {
+		dev_err(dev, "failed to register controller\n");
+		pm_runtime_put_sync(&pdev->dev);
+		goto disable_pm;
+	}
+
+	return 0;
+disable_pm:
+	pm_runtime_disable(dev);
+	return ret;
+}
+
+static int am654_hbmc_remove(struct platform_device *pdev)
+{
+	struct am654_hbmc_priv *priv = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = hyperbus_unregister_device(&priv->hbdev);
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return ret;
+}
+
+static const struct of_device_id am654_hbmc_dt_ids[] = {
+	{
+		.compatible = "ti,am654-hbmc",
+	},
+	{ /* end of table */ }
+};
+
+MODULE_DEVICE_TABLE(of, am654_hbmc_dt_ids);
+
+static struct platform_driver am654_hbmc_platform_driver = {
+	.probe = am654_hbmc_probe,
+	.remove = am654_hbmc_remove,
+	.driver = {
+		.name = "hbmc-am654",
+		.of_match_table = am654_hbmc_dt_ids,
+	},
+};
+
+module_platform_driver(am654_hbmc_platform_driver);
+
+MODULE_DESCRIPTION("HBMC driver for AM654 SoC");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:hbmc-am654");
+MODULE_AUTHOR("Vignesh Raghavendra <vigneshr@ti.com>");
-- 
2.22.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-06-25  8:01 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-25  7:57 [PATCH v8 0/5] MTD: Add Initial Hyperbus support Vignesh Raghavendra
2019-06-25  7:57 ` [PATCH v8 1/5] mtd: cfi_cmdset_0002: Add support for polling status register Vignesh Raghavendra
2019-06-25 17:01   ` Tokunori Ikegami
2019-06-26  6:17     ` Vignesh Raghavendra
2019-06-25  7:57 ` [PATCH v8 2/5] dt-bindings: mtd: Add binding documentation for HyperFlash Vignesh Raghavendra
2019-06-25  7:57 ` [PATCH v8 3/5] mtd: Add support for HyperBus memory devices Vignesh Raghavendra
2019-06-25 20:00   ` Sergei Shtylyov
2019-07-02 17:53   ` Sergei Shtylyov
2019-07-03  4:41     ` Vignesh Raghavendra
2019-07-03 18:14       ` Sergei Shtylyov
2019-07-04 18:35         ` Vignesh Raghavendra
2019-07-11 19:26   ` Sergei Shtylyov
2019-07-12  4:52     ` Vignesh Raghavendra
2022-06-27 15:28   ` Geert Uytterhoeven
2022-07-02 17:10     ` Raghavendra, Vignesh
2022-07-03  8:33       ` Geert Uytterhoeven
2019-06-25  7:57 ` [PATCH v8 4/5] dt-bindings: mtd: Add bindings for TI's AM654 HyperBus memory controller Vignesh Raghavendra
2019-06-25  7:57 ` Vignesh Raghavendra [this message]
2019-06-28 14:35 ` [PATCH v8 0/5] MTD: Add Initial Hyperbus support Vignesh Raghavendra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190625075746.10439-6-vigneshr@ti.com \
    --to=vigneshr@ti.com \
    --cc=bbrezillon@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=ikegami.t@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=masonccyang@mxic.com.tw \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=robh+dt@kernel.org \
    --cc=sergei.shtylyov@cogentembedded.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).