Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: sboyd@kernel.org, mturquette@baylibre.com, robh+dt@kernel.org
Cc: devicetree@vger.kernel.org,
	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
	darren.tsao@bitmain.com, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, fisher.cheng@bitmain.com,
	alec.lin@bitmain.com, linux-clk@vger.kernel.org,
	haitao.suo@bitmain.com
Subject: [PATCH 4/5] clk: Add driver for Bitmain BM1880 SoC clock controller
Date: Fri,  5 Jul 2019 20:44:39 +0530
Message-ID: <20190705151440.20844-5-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20190705151440.20844-1-manivannan.sadhasivam@linaro.org>

Add common clock driver for Bitmain BM1880 SoC clock controller.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/clk/Kconfig      |   6 +
 drivers/clk/Makefile     |   1 +
 drivers/clk/clk-bm1880.c | 947 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 954 insertions(+)
 create mode 100644 drivers/clk/clk-bm1880.c

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index fc1e0cf44995..ffc61ed85ade 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -304,6 +304,12 @@ config COMMON_CLK_FIXED_MMIO
 	help
 	  Support for Memory Mapped IO Fixed clocks
 
+config COMMON_CLK_BM1880
+	bool "Clock driver for Bitmain BM1880 SoC"
+	depends on ARCH_BITMAIN || COMPILE_TEST
+	help
+	  This driver supports the clocks on Bitmain BM1880 SoC.
+
 source "drivers/clk/actions/Kconfig"
 source "drivers/clk/analogbits/Kconfig"
 source "drivers/clk/bcm/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 9ef4305d55e0..66c44b84a6f2 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_MACH_ASM9260)		+= clk-asm9260.o
 obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN)	+= clk-axi-clkgen.o
 obj-$(CONFIG_ARCH_AXXIA)		+= clk-axm5516.o
 obj-$(CONFIG_COMMON_CLK_BD718XX)	+= clk-bd718x7.o
+obj-$(CONFIG_COMMON_CLK_BM1880)		+= clk-bm1880.o
 obj-$(CONFIG_COMMON_CLK_CDCE706)	+= clk-cdce706.o
 obj-$(CONFIG_COMMON_CLK_CDCE925)	+= clk-cdce925.o
 obj-$(CONFIG_ARCH_CLPS711X)		+= clk-clps711x.o
diff --git a/drivers/clk/clk-bm1880.c b/drivers/clk/clk-bm1880.c
new file mode 100644
index 000000000000..26cdb75bb936
--- /dev/null
+++ b/drivers/clk/clk-bm1880.c
@@ -0,0 +1,947 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Bitmain BM1880 SoC clock driver
+ *
+ * Copyright (c) 2019 Linaro Ltd.
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/bm1880-clock.h>
+
+#define BM1880_CLK_MPLL_CTL	0x00
+#define BM1880_CLK_SPLL_CTL	0x04
+#define BM1880_CLK_FPLL_CTL	0x08
+#define BM1880_CLK_DDRPLL_CTL	0x0c
+
+#define BM1880_CLK_ENABLE0	0x00
+#define BM1880_CLK_ENABLE1	0x04
+#define BM1880_CLK_SELECT	0x20
+#define BM1880_CLK_DIV0		0x40
+#define BM1880_CLK_DIV1		0x44
+#define BM1880_CLK_DIV2		0x48
+#define BM1880_CLK_DIV3		0x4c
+#define BM1880_CLK_DIV4		0x50
+#define BM1880_CLK_DIV5		0x54
+#define BM1880_CLK_DIV6		0x58
+#define BM1880_CLK_DIV7		0x5c
+#define BM1880_CLK_DIV8		0x60
+#define BM1880_CLK_DIV9		0x64
+#define BM1880_CLK_DIV10	0x68
+#define BM1880_CLK_DIV11	0x6c
+#define BM1880_CLK_DIV12	0x70
+#define BM1880_CLK_DIV13	0x74
+#define BM1880_CLK_DIV14	0x78
+#define BM1880_CLK_DIV15	0x7c
+#define BM1880_CLK_DIV16	0x80
+#define BM1880_CLK_DIV17	0x84
+#define BM1880_CLK_DIV18	0x88
+#define BM1880_CLK_DIV19	0x8c
+#define BM1880_CLK_DIV20	0x90
+#define BM1880_CLK_DIV21	0x94
+#define BM1880_CLK_DIV22	0x98
+#define BM1880_CLK_DIV23	0x9c
+#define BM1880_CLK_DIV24	0xa0
+#define BM1880_CLK_DIV25	0xa4
+#define BM1880_CLK_DIV26	0xa8
+#define BM1880_CLK_DIV27	0xac
+#define BM1880_CLK_DIV28	0xb0
+
+#define to_bm1880_pll_clk(_hw) container_of(_hw, struct bm1880_pll_hw_clock, hw)
+#define to_bm1880_div_clk(_hw) container_of(_hw, struct bm1880_div_hw_clock, hw)
+
+static DEFINE_SPINLOCK(bm1880_clk_lock);
+
+struct bm1880_clock_data {
+	void __iomem *pll_base;
+	void __iomem *sys_base;
+	struct clk_onecell_data clk_data;
+};
+
+struct bm1880_gate_clock {
+	unsigned int	id;
+	const char	*name;
+	const char	*parent;
+	u32		gate_reg;
+	s8		gate_shift;
+	unsigned long	flags;
+};
+
+struct bm1880_mux_clock {
+	unsigned int	id;
+	const char	*name;
+	const char	* const * parents;
+	s8		num_parents;
+	u32		reg;
+	s8		shift;
+	unsigned long	flags;
+};
+
+struct bm1880_div_clock {
+	unsigned int	id;
+	const char	*name;
+	const char	*parent;
+	u32		reg;
+	u8		shift;
+	u8		width;
+	u32		initval;
+	struct clk_div_table *table;
+	unsigned long	flags;
+};
+
+struct bm1880_div_hw_clock {
+	struct bm1880_div_clock div;
+	void __iomem *base;
+	spinlock_t *lock;
+	struct clk_hw hw;
+};
+
+struct bm1880_composite_clock {
+	unsigned int	id;
+	const char	*name;
+	const char	*parent;
+	const char	* const * parents;
+	unsigned int	num_parents;
+	unsigned long	flags;
+
+	u32		gate_reg;
+	u32		mux_reg;
+	u32		div_reg;
+
+	s8		gate_shift;
+	s8		mux_shift;
+	s8		div_shift;
+	s8		div_width;
+	s16		div_initval;
+	struct clk_div_table *table;
+};
+
+struct bm1880_pll_clock {
+	unsigned int	id;
+	const char	*name;
+	const char	*parent;
+	u32		reg;
+	unsigned long	flags;
+};
+
+struct bm1880_pll_hw_clock {
+	struct bm1880_pll_clock pll;
+	void __iomem *base;
+	struct clk_hw hw;
+};
+
+#define GATE_DIV(_id, _name, _parent, _gate_reg, _gate_shift, _div_reg,	\
+			_div_shift, _div_width, _div_initval, _table,	\
+			_flags) {					\
+		.id = _id,						\
+		.parent = _parent,					\
+		.name = _name,						\
+		.gate_reg = _gate_reg,					\
+		.gate_shift = _gate_shift,				\
+		.div_reg = _div_reg,					\
+		.div_shift = _div_shift,				\
+		.div_width = _div_width,				\
+		.div_initval = _div_initval,				\
+		.table = _table,					\
+		.mux_shift = -1,					\
+		.flags = _flags,					\
+	}
+
+#define GATE_MUX(_id, _name, _parents, _gate_reg, _gate_shift,		\
+			_mux_reg, _mux_shift, _flags) {			\
+		.id = _id,						\
+		.parents = _parents,					\
+		.num_parents = ARRAY_SIZE(_parents),			\
+		.name = _name,						\
+		.gate_reg = _gate_reg,					\
+		.gate_shift = _gate_shift,				\
+		.div_shift = -1,					\
+		.mux_reg = _mux_reg,					\
+		.mux_shift = _mux_shift,				\
+		.flags = _flags,					\
+	}
+
+static const struct bm1880_pll_clock bm1880_pll_clks[] = {
+	{ BM1880_CLK_MPLL, "clk_mpll", "osc", BM1880_CLK_MPLL_CTL,
+	  CLK_IS_CRITICAL },
+	{ BM1880_CLK_SPLL, "clk_spll", "osc", BM1880_CLK_SPLL_CTL,
+	  CLK_IS_CRITICAL },
+	{ BM1880_CLK_FPLL, "clk_fpll", "osc", BM1880_CLK_FPLL_CTL,
+	  CLK_IS_CRITICAL },
+	{ BM1880_CLK_DDRPLL, "clk_ddrpll", "osc", BM1880_CLK_DDRPLL_CTL,
+	  CLK_IS_CRITICAL },
+};
+
+static const struct bm1880_gate_clock bm1880_gate_clks[] = {
+	{ BM1880_CLK_AHB_ROM, "clk_ahb_rom", "clk_mux_axi6",
+	  BM1880_CLK_ENABLE0, 2, CLK_IS_CRITICAL },
+	{ BM1880_CLK_AXI_SRAM, "clk_axi_sram", "clk_axi1",
+	  BM1880_CLK_ENABLE0, 3, CLK_IS_CRITICAL },
+	{ BM1880_CLK_DDR_AXI, "clk_ddr_axi", "clk_mux_axi6",
+	  BM1880_CLK_ENABLE0, 4, CLK_IS_CRITICAL },
+	{ BM1880_CLK_APB_EFUSE, "clk_apb_efuse", "clk_mux_axi6",
+	  BM1880_CLK_ENABLE0, 6, CLK_IS_CRITICAL },
+	{ BM1880_CLK_AXI5_EMMC, "clk_axi5_emmc", "clk_axi5",
+	  BM1880_CLK_ENABLE0, 7, 0 },
+	{ BM1880_CLK_AXI5_SD, "clk_axi5_sd", "clk_axi5",
+	  BM1880_CLK_ENABLE0, 10, 0 },
+	{ BM1880_CLK_AXI4_ETH0, "clk_axi4_eth0", "clk_axi4",
+	  BM1880_CLK_ENABLE0, 14, 0 },
+	{ BM1880_CLK_AXI4_ETH1, "clk_axi4_eth1", "clk_axi4",
+	  BM1880_CLK_ENABLE0, 16, 0 },
+	{ BM1880_CLK_AXI1_GDMA, "clk_axi1_gdma", "clk_axi1",
+	  BM1880_CLK_ENABLE0, 17, 0 },
+	/* Don't gate GPIO clocks as it is not owned by the GPIO driver */
+	{ BM1880_CLK_APB_GPIO, "clk_apb_gpio", "clk_mux_axi6",
+	  BM1880_CLK_ENABLE0, 18, CLK_IGNORE_UNUSED },
+	{ BM1880_CLK_APB_GPIO_INTR, "clk_apb_gpio_intr", "clk_mux_axi6",
+	  BM1880_CLK_ENABLE0, 19, CLK_IGNORE_UNUSED },
+	{ BM1880_CLK_AXI1_MINER, "clk_axi1_miner", "clk_axi1",
+	  BM1880_CLK_ENABLE0, 21, 0 },
+	{ BM1880_CLK_AHB_SF, "clk_ahb_sf", "clk_mux_axi6",
+	  BM1880_CLK_ENABLE0, 22, 0 },
+	{ BM1880_CLK_SDMA_AXI, "clk_sdma_axi", "clk_axi5",
+	  BM1880_CLK_ENABLE0, 23, 0 },
+	{ BM1880_CLK_APB_I2C, "clk_apb_i2c", "clk_mux_axi6",
+	  BM1880_CLK_ENABLE0, 25, 0 },
+	{ BM1880_CLK_APB_WDT, "clk_apb_wdt", "clk_mux_axi6",
+	  BM1880_CLK_ENABLE0, 26, 0 },
+	{ BM1880_CLK_APB_JPEG, "clk_apb_jpeg", "clk_axi6",
+	  BM1880_CLK_ENABLE0, 27, 0 },
+	{ BM1880_CLK_AXI5_NF, "clk_axi5_nf", "clk_axi5",
+	  BM1880_CLK_ENABLE0, 29, 0 },
+	{ BM1880_CLK_APB_NF, "clk_apb_nf", "clk_axi6",
+	  BM1880_CLK_ENABLE0, 30, 0 },
+	{ BM1880_CLK_APB_PWM, "clk_apb_pwm", "clk_mux_axi6",
+	  BM1880_CLK_ENABLE1, 0, 0 },
+	{ BM1880_CLK_RV, "clk_rv", "clk_mux_rv",
+	  BM1880_CLK_ENABLE1, 1, 0 },
+	{ BM1880_CLK_APB_SPI, "clk_apb_spi", "clk_mux_axi6",
+	  BM1880_CLK_ENABLE1, 2, 0 },
+	{ BM1880_CLK_UART_500M, "clk_uart_500m", "clk_div_uart_500m",
+	  BM1880_CLK_ENABLE1, 4, 0 },
+	{ BM1880_CLK_APB_UART, "clk_apb_uart", "clk_axi6",
+	  BM1880_CLK_ENABLE1, 5, 0 },
+	{ BM1880_CLK_APB_I2S, "clk_apb_i2s", "clk_axi6",
+	  BM1880_CLK_ENABLE1, 6, 0 },
+	{ BM1880_CLK_AXI4_USB, "clk_axi4_usb", "clk_axi4",
+	  BM1880_CLK_ENABLE1, 7, 0 },
+	{ BM1880_CLK_APB_USB, "clk_apb_usb", "clk_axi6",
+	  BM1880_CLK_ENABLE1, 8, 0 },
+	{ BM1880_CLK_12M_USB, "clk_12m_usb", "clk_div_12m_usb",
+	  BM1880_CLK_ENABLE1, 11, 0 },
+	{ BM1880_CLK_APB_VIDEO, "clk_apb_video", "clk_axi6",
+	  BM1880_CLK_ENABLE1, 12, 0 },
+	{ BM1880_CLK_APB_VPP, "clk_apb_vpp", "clk_axi6",
+	  BM1880_CLK_ENABLE1, 15, 0 },
+	{ BM1880_CLK_AXI6, "clk_axi6", "clk_mux_axi6",
+	  BM1880_CLK_ENABLE1, 21, CLK_IS_CRITICAL },
+};
+
+static const char * const clk_a53_parents[] = { "clk_spll", "clk_mpll" };
+static const char * const clk_rv_parents[] = { "clk_div_1_rv", "clk_div_0_rv" };
+static const char * const clk_axi1_parents[] = { "clk_div_1_axi1", "clk_div_0_axi1" };
+static const char * const clk_axi6_parents[] = { "clk_div_1_axi6", "clk_div_0_axi6" };
+
+static const struct bm1880_mux_clock bm1880_mux_clks[] = {
+	{ BM1880_CLK_MUX_RV, "clk_mux_rv", clk_rv_parents, 2,
+	  BM1880_CLK_SELECT, 1, 0 },
+	{ BM1880_CLK_MUX_AXI6, "clk_mux_axi6", clk_axi6_parents, 2,
+	  BM1880_CLK_SELECT, 3, 0 },
+};
+
+static struct clk_div_table bm1880_div_table_0[] = {
+	{ 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
+	{ 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 },
+	{ 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 },
+	{ 12, 13 }, { 13, 14 }, { 14, 15 }, { 15, 16 },
+	{ 16, 17 }, { 17, 18 }, { 18, 19 }, { 19, 20 },
+	{ 20, 21 }, { 21, 22 }, { 22, 23 }, { 23, 24 },
+	{ 24, 25 }, { 25, 26 }, { 26, 27 }, { 27, 28 },
+	{ 28, 29 }, { 29, 30 }, { 30, 31 }, { 31, 32 },
+	{ 0, 0 }
+};
+
+static struct clk_div_table bm1880_div_table_1[] = {
+	{ 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
+	{ 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 },
+	{ 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 },
+	{ 12, 13 }, { 13, 14 }, { 14, 15 }, { 15, 16 },
+	{ 16, 17 }, { 17, 18 }, { 18, 19 }, { 19, 20 },
+	{ 20, 21 }, { 21, 22 }, { 22, 23 }, { 23, 24 },
+	{ 24, 25 }, { 25, 26 }, { 26, 27 }, { 27, 28 },
+	{ 28, 29 }, { 29, 30 }, { 30, 31 }, { 31, 32 },
+	{ 127, 128 }, { 0, 0 }
+};
+
+static struct clk_div_table bm1880_div_table_2[] = {
+	{ 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
+	{ 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 },
+	{ 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 },
+	{ 12, 13 }, { 13, 14 }, { 14, 15 }, { 15, 16 },
+	{ 16, 17 }, { 17, 18 }, { 18, 19 }, { 19, 20 },
+	{ 20, 21 }, { 21, 22 }, { 22, 23 }, { 23, 24 },
+	{ 24, 25 }, { 25, 26 }, { 26, 27 }, { 27, 28 },
+	{ 28, 29 }, { 29, 30 }, { 30, 31 }, { 31, 32 },
+	{ 127, 128 }, { 255, 256 }, { 0, 0 }
+};
+
+static struct clk_div_table bm1880_div_table_3[] = {
+	{ 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
+	{ 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 },
+	{ 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 },
+	{ 12, 13 }, { 13, 14 }, { 14, 15 }, { 15, 16 },
+	{ 16, 17 }, { 17, 18 }, { 18, 19 }, { 19, 20 },
+	{ 20, 21 }, { 21, 22 }, { 22, 23 }, { 23, 24 },
+	{ 24, 25 }, { 25, 26 }, { 26, 27 }, { 27, 28 },
+	{ 28, 29 }, { 29, 30 }, { 30, 31 }, { 31, 32 },
+	{ 127, 128 }, { 255, 256 }, { 511, 512 }, { 0, 0 }
+};
+
+static struct clk_div_table bm1880_div_table_4[] = {
+	{ 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
+	{ 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 },
+	{ 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 },
+	{ 12, 13 }, { 13, 14 }, { 14, 15 }, { 15, 16 },
+	{ 16, 17 }, { 17, 18 }, { 18, 19 }, { 19, 20 },
+	{ 20, 21 }, { 21, 22 }, { 22, 23 }, { 23, 24 },
+	{ 24, 25 }, { 25, 26 }, { 26, 27 }, { 27, 28 },
+	{ 28, 29 }, { 29, 30 }, { 30, 31 }, { 31, 32 },
+	{ 127, 128 }, { 255, 256 }, { 511, 512 }, { 65535, 65536 },
+	{ 0, 0 }
+};
+
+static const struct bm1880_div_clock bm1880_div_clks[] = {
+	{ BM1880_CLK_DIV_0_RV, "clk_div_0_rv", "clk_spll",
+	  BM1880_CLK_DIV12, 16, 5, 1, bm1880_div_table_0, CLK_IGNORE_UNUSED },
+	{ BM1880_CLK_DIV_1_RV, "clk_div_1_rv", "clk_fpll",
+	  BM1880_CLK_DIV13, 16, 5, 1, bm1880_div_table_0, CLK_IGNORE_UNUSED },
+	{ BM1880_CLK_DIV_UART_500M, "clk_div_uart_500m", "clk_fpll",
+	  BM1880_CLK_DIV15, 16, 7, 3, bm1880_div_table_1, 0 },
+	{ BM1880_CLK_DIV_0_AXI1, "clk_div_0_axi1", "clk_mpll",
+	  BM1880_CLK_DIV21, 16, 5, 2, bm1880_div_table_0, CLK_IS_CRITICAL },
+	{ BM1880_CLK_DIV_1_AXI1, "clk_div_1_axi1", "clk_fpll",
+	  BM1880_CLK_DIV22, 16, 5, 3, bm1880_div_table_0, CLK_IS_CRITICAL },
+	{ BM1880_CLK_DIV_0_AXI6, "clk_div_0_axi6", "clk_fpll",
+	  BM1880_CLK_DIV27, 16, 5, 15, bm1880_div_table_0, CLK_IS_CRITICAL },
+	{ BM1880_CLK_DIV_1_AXI6, "clk_div_1_axi6", "clk_mpll",
+	  BM1880_CLK_DIV28, 16, 5, 11, bm1880_div_table_0, CLK_IS_CRITICAL },
+	{ BM1880_CLK_DIV_12M_USB, "clk_div_12m_usb", "clk_fpll",
+	  BM1880_CLK_DIV18, 16, 7, 125, bm1880_div_table_1, 0 },
+};
+
+static struct bm1880_composite_clock bm1880_composite_clks[] = {
+	GATE_MUX(BM1880_CLK_A53, "clk_a53", clk_a53_parents,
+		 BM1880_CLK_ENABLE0, 0, BM1880_CLK_SELECT, 0,
+		 CLK_IS_CRITICAL),
+	GATE_DIV(BM1880_CLK_50M_A53, "clk_50m_a53", "clk_fpll",
+		 BM1880_CLK_ENABLE0, 1, BM1880_CLK_DIV0, 16, 5, 30,
+		 bm1880_div_table_0, CLK_IS_CRITICAL),
+	GATE_DIV(BM1880_CLK_EFUSE, "clk_efuse", "clk_fpll",
+		 BM1880_CLK_ENABLE0, 5, BM1880_CLK_DIV1, 16, 7, 60,
+		 bm1880_div_table_1, 0),
+	GATE_DIV(BM1880_CLK_EMMC, "clk_emmc", "clk_fpll",
+		 BM1880_CLK_ENABLE0, 8, BM1880_CLK_DIV2, 16, 5, 15,
+		 bm1880_div_table_0, 0),
+	GATE_DIV(BM1880_CLK_100K_EMMC, "clk_100k_emmc", "clk_div_12m_usb",
+		 BM1880_CLK_ENABLE0, 9, BM1880_CLK_DIV3, 16, 8, 120,
+		 bm1880_div_table_2, 0),
+	GATE_DIV(BM1880_CLK_SD, "clk_sd", "clk_fpll",
+		 BM1880_CLK_ENABLE0, 11, BM1880_CLK_DIV4, 16, 5, 15,
+		 bm1880_div_table_0, 0),
+	GATE_DIV(BM1880_CLK_100K_SD, "clk_100k_sd", "clk_div_12m_usb",
+		 BM1880_CLK_ENABLE0, 12, BM1880_CLK_DIV5, 16, 8, 120,
+		 bm1880_div_table_2, 0),
+	GATE_DIV(BM1880_CLK_500M_ETH0, "clk_500m_eth0", "clk_fpll",
+		 BM1880_CLK_ENABLE0, 13, BM1880_CLK_DIV6, 16, 5, 3,
+		 bm1880_div_table_0, 0),
+	GATE_DIV(BM1880_CLK_500M_ETH1, "clk_500m_eth1", "clk_fpll",
+		 BM1880_CLK_ENABLE0, 15, BM1880_CLK_DIV7, 16, 5, 3,
+		 bm1880_div_table_0, 0),
+	/* Don't gate GPIO clocks as it is not owned by the GPIO driver */
+	GATE_DIV(BM1880_CLK_GPIO_DB, "clk_gpio_db", "clk_div_12m_usb",
+		 BM1880_CLK_ENABLE0, 20, BM1880_CLK_DIV8, 16, 16, 120,
+		 bm1880_div_table_4, CLK_IGNORE_UNUSED),
+	GATE_DIV(BM1880_CLK_SDMA_AUD, "clk_sdma_aud", "clk_fpll",
+		 BM1880_CLK_ENABLE0, 24, BM1880_CLK_DIV9, 16, 7, 61,
+		 bm1880_div_table_1, 0),
+	GATE_DIV(BM1880_CLK_JPEG_AXI, "clk_jpeg_axi", "clk_fpll",
+		 BM1880_CLK_ENABLE0, 28, BM1880_CLK_DIV10, 16, 5, 4,
+		 bm1880_div_table_0, 0),
+	GATE_DIV(BM1880_CLK_NF, "clk_nf", "clk_fpll",
+		 BM1880_CLK_ENABLE0, 31, BM1880_CLK_DIV11, 16, 5, 30,
+		 bm1880_div_table_0, 0),
+	GATE_DIV(BM1880_CLK_TPU_AXI, "clk_tpu_axi", "clk_spll",
+		 BM1880_CLK_ENABLE1, 3, BM1880_CLK_DIV14, 16, 5, 1,
+		 bm1880_div_table_0, 0),
+	GATE_DIV(BM1880_CLK_125M_USB, "clk_125m_usb", "clk_fpll",
+		 BM1880_CLK_ENABLE1, 9, BM1880_CLK_DIV16, 16, 5, 12,
+		 bm1880_div_table_0, 0),
+	GATE_DIV(BM1880_CLK_33K_USB, "clk_33k_usb", "clk_div_12m_usb",
+		 BM1880_CLK_ENABLE1, 10, BM1880_CLK_DIV17, 16, 9, 363,
+		 bm1880_div_table_3, 0),
+	GATE_DIV(BM1880_CLK_VIDEO_AXI, "clk_video_axi", "clk_fpll",
+		 BM1880_CLK_ENABLE1, 13, BM1880_CLK_DIV19, 16, 5, 4,
+		 bm1880_div_table_0, 0),
+	GATE_DIV(BM1880_CLK_VPP_AXI, "clk_vpp_axi", "clk_fpll",
+		 BM1880_CLK_ENABLE1, 14, BM1880_CLK_DIV20, 16, 5, 4,
+		 bm1880_div_table_0, 0),
+	GATE_MUX(BM1880_CLK_AXI1, "clk_axi1", clk_axi1_parents,
+		 BM1880_CLK_ENABLE1, 15, BM1880_CLK_SELECT, 2,
+		 CLK_IS_CRITICAL),
+	GATE_DIV(BM1880_CLK_AXI2, "clk_axi2", "clk_fpll",
+		 BM1880_CLK_ENABLE1, 17, BM1880_CLK_DIV23, 16, 5, 3,
+		 bm1880_div_table_0, CLK_IS_CRITICAL),
+	GATE_DIV(BM1880_CLK_AXI3, "clk_axi3", "clk_mux_rv",
+		 BM1880_CLK_ENABLE1, 18, BM1880_CLK_DIV24, 16, 5, 2,
+		 bm1880_div_table_0, CLK_IS_CRITICAL),
+	GATE_DIV(BM1880_CLK_AXI4, "clk_axi4", "clk_fpll",
+		 BM1880_CLK_ENABLE1, 19, BM1880_CLK_DIV25, 16, 5, 6,
+		 bm1880_div_table_0, CLK_IS_CRITICAL),
+	GATE_DIV(BM1880_CLK_AXI5, "clk_axi5", "clk_fpll",
+		 BM1880_CLK_ENABLE1, 20, BM1880_CLK_DIV26, 16, 5, 15,
+		 bm1880_div_table_0, CLK_IS_CRITICAL),
+};
+
+static unsigned long bm1880_pll_rate_calc(u32 regval, unsigned long parent_rate)
+{
+	u32 fbdiv, fref, refdiv;
+	u32 postdiv1, postdiv2;
+	unsigned long rate, numerator, denominator;
+
+	fbdiv = (regval >> 16) & 0xfff;
+	fref = parent_rate;
+	refdiv = regval & 0x1f;
+	postdiv1 = (regval >> 8) & 0x7;
+	postdiv2 = (regval >> 12) & 0x7;
+
+	numerator = parent_rate * fbdiv;
+	denominator = refdiv * postdiv1 * postdiv2;
+	do_div(numerator, denominator);
+	rate = numerator;
+
+	return rate;
+}
+
+static unsigned long bm1880_pll_recalc_rate(struct clk_hw *hw,
+					    unsigned long parent_rate)
+{
+	struct bm1880_pll_hw_clock *pll_hw = to_bm1880_pll_clk(hw);
+	unsigned long rate;
+	u32 regval;
+
+	regval = readl(pll_hw->base + pll_hw->pll.reg);
+	rate = bm1880_pll_rate_calc(regval, parent_rate);
+
+	return rate;
+}
+
+static const struct clk_ops bm1880_pll_ops = {
+	.recalc_rate	= bm1880_pll_recalc_rate,
+};
+
+struct clk *bm1880_clk_register_pll(const struct bm1880_pll_clock *pll_clk,
+				    void __iomem *sys_base)
+{
+	struct bm1880_pll_hw_clock *pll_hw;
+	struct clk_init_data init;
+	struct clk_hw *hw;
+	int err;
+
+	pll_hw = kzalloc(sizeof(*pll_hw), GFP_KERNEL);
+	if (!pll_hw)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = pll_clk->name;
+	init.ops = &bm1880_pll_ops;
+	init.flags = pll_clk->flags;
+	init.parent_names = &pll_clk->parent;
+	init.num_parents = 1;
+
+	pll_hw->hw.init = &init;
+	pll_hw->pll.reg = pll_clk->reg;
+	pll_hw->base = sys_base;
+
+	hw = &pll_hw->hw;
+	err = clk_hw_register(NULL, hw);
+
+	if (err) {
+		kfree(pll_hw);
+		return ERR_PTR(err);
+	}
+
+	return hw->clk;
+}
+
+void bm1880_clk_unregister_pll(struct clk *clk)
+{
+	struct bm1880_pll_hw_clock *pll_hw;
+	struct clk_hw *hw;
+
+	hw = __clk_get_hw(clk);
+	if (!hw)
+		return;
+
+	pll_hw = to_bm1880_pll_clk(hw);
+
+	clk_unregister(clk);
+	kfree(pll_hw);
+}
+
+int bm1880_clk_register_plls(const struct bm1880_pll_clock *clks,
+			     int num_clks, struct bm1880_clock_data *data)
+{
+	struct clk *clk;
+	void __iomem *pll_base = data->pll_base;
+	int i;
+
+	for (i = 0; i < num_clks; i++) {
+		const struct bm1880_pll_clock *bm1880_clk = &clks[i];
+
+		clk = bm1880_clk_register_pll(bm1880_clk, pll_base);
+		if (IS_ERR(clk)) {
+			pr_err("%s: failed to register clock %s\n",
+			       __func__, bm1880_clk->name);
+			goto err_clk;
+		}
+
+		data->clk_data.clks[clks[i].id] = clk;
+	}
+
+	return 0;
+
+err_clk:
+	while (i--)
+		bm1880_clk_unregister_pll(data->clk_data.clks[clks[i].id]);
+
+	return PTR_ERR(clk);
+}
+
+int bm1880_clk_register_mux(const struct bm1880_mux_clock *clks,
+			    int num_clks, struct bm1880_clock_data *data)
+{
+	struct clk *clk;
+	void __iomem *sys_base = data->sys_base;
+	int i;
+
+	for (i = 0; i < num_clks; i++) {
+		clk = clk_register_mux(NULL, clks[i].name,
+				       clks[i].parents,
+				       clks[i].num_parents,
+				       clks[i].flags,
+				       sys_base + clks[i].reg,
+				       clks[i].shift, 1, 0,
+				       &bm1880_clk_lock);
+		if (IS_ERR(clk)) {
+			pr_err("%s: failed to register clock %s\n",
+			       __func__, clks[i].name);
+			goto err_clk;
+		}
+
+		data->clk_data.clks[clks[i].id] = clk;
+	}
+
+	return 0;
+
+err_clk:
+	while (i--)
+		clk_unregister_gate(data->clk_data.clks[clks[i].id]);
+
+	return PTR_ERR(clk);
+}
+
+static unsigned long bm1880_clk_div_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	struct bm1880_div_hw_clock *div_hw = to_bm1880_div_clk(hw);
+	struct bm1880_div_clock *div = &div_hw->div;
+	void __iomem *reg_addr = div_hw->base + div->reg;
+	unsigned int val;
+	unsigned long rate;
+
+	if (!(readl(reg_addr) & BIT(3))) {
+		val = div->initval;
+	} else {
+		val = readl(reg_addr) >> div->shift;
+		val &= clk_div_mask(div->width);
+	}
+
+	rate = divider_recalc_rate(hw, parent_rate, val, div->table,
+				   div->flags, div->width);
+
+	return rate;
+}
+
+static long bm1880_clk_div_round_rate(struct clk_hw *hw, unsigned long rate,
+				      unsigned long *prate)
+{
+	struct bm1880_div_hw_clock *div_hw = to_bm1880_div_clk(hw);
+	struct bm1880_div_clock *div = &div_hw->div;
+	void __iomem *reg_addr = div_hw->base + div->reg;
+
+	if (div->flags & CLK_DIVIDER_READ_ONLY) {
+		u32 val;
+
+		val = readl(reg_addr) >> div->shift;
+		val &= clk_div_mask(div->width);
+
+		return divider_ro_round_rate(hw, rate, prate, div->table,
+					     div->width, div->flags,
+					     val);
+	}
+
+	return divider_round_rate(hw, rate, prate, div->table,
+				  div->width, div->flags);
+}
+
+static int bm1880_clk_div_set_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long parent_rate)
+{
+	struct bm1880_div_hw_clock *div_hw = to_bm1880_div_clk(hw);
+	struct bm1880_div_clock *div = &div_hw->div;
+	void __iomem *reg_addr = div_hw->base + div->reg;
+	unsigned long flags = 0;
+	int value;
+	u32 val;
+
+	value = divider_get_val(rate, parent_rate, div->table,
+				div->width, div_hw->div.flags);
+	if (value < 0)
+		return value;
+
+	if (div_hw->lock)
+		spin_lock_irqsave(div_hw->lock, flags);
+	else
+		__acquire(div_hw->lock);
+
+	if (div->flags & CLK_DIVIDER_HIWORD_MASK) {
+		val = clk_div_mask(div->width) << (div_hw->div.shift + 16);
+	} else {
+		val = readl(reg_addr);
+		val &= ~(clk_div_mask(div->width) << div_hw->div.shift);
+	}
+	val |= (u32)value << div->shift;
+	writel(val, reg_addr);
+
+	if (div_hw->lock)
+		spin_unlock_irqrestore(div_hw->lock, flags);
+	else
+		__release(div_hw->lock);
+
+	return 0;
+}
+
+const struct clk_ops bm1880_clk_div_ops = {
+	.recalc_rate = bm1880_clk_div_recalc_rate,
+	.round_rate = bm1880_clk_div_round_rate,
+	.set_rate = bm1880_clk_div_set_rate,
+};
+
+struct clk *bm1880_clk_register_div(const struct bm1880_div_clock *div_clk,
+				    void __iomem *sys_base)
+{
+	struct bm1880_div_hw_clock *div_hw;
+	struct clk_init_data init;
+	struct clk_hw *hw;
+	int err;
+
+	div_hw = kzalloc(sizeof(*div_hw), GFP_KERNEL);
+	if (!div_hw)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = div_clk->name;
+	init.ops = &bm1880_clk_div_ops;
+	init.flags = div_clk->flags;
+	init.parent_names = &div_clk->parent;
+	init.num_parents = 1;
+
+	div_hw->hw.init = &init;
+	div_hw->div.reg = div_clk->reg;
+	div_hw->div.shift = div_clk->shift;
+	div_hw->div.width = div_clk->width;
+	div_hw->div.initval = div_clk->initval;
+	div_hw->div.table = div_clk->table;
+	div_hw->div.flags = CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO;
+	div_hw->base = sys_base;
+	div_hw->lock = &bm1880_clk_lock;
+
+	hw = &div_hw->hw;
+	err = clk_hw_register(NULL, hw);
+
+	if (err) {
+		kfree(div_hw);
+		return ERR_PTR(err);
+	}
+
+	return hw->clk;
+}
+
+void bm1880_clk_unregister_div(struct clk *clk)
+{
+	struct bm1880_div_hw_clock *div_hw;
+	struct clk_hw *hw;
+
+	hw = __clk_get_hw(clk);
+	if (!hw)
+		return;
+
+	div_hw = to_bm1880_div_clk(hw);
+
+	clk_unregister(clk);
+	kfree(div_hw);
+}
+
+int bm1880_clk_register_divs(const struct bm1880_div_clock *clks,
+			     int num_clks, struct bm1880_clock_data *data)
+{
+	struct clk *clk;
+	void __iomem *sys_base = data->sys_base;
+	int i;
+
+	for (i = 0; i < num_clks; i++) {
+		const struct bm1880_div_clock *bm1880_clk = &clks[i];
+
+		clk = bm1880_clk_register_div(bm1880_clk, sys_base);
+		if (IS_ERR(clk)) {
+			pr_err("%s: failed to register clock %s\n",
+			       __func__, bm1880_clk->name);
+			goto err_clk;
+		}
+
+		data->clk_data.clks[clks[i].id] = clk;
+	}
+
+	return 0;
+
+err_clk:
+	while (i--)
+		bm1880_clk_unregister_div(data->clk_data.clks[clks[i].id]);
+
+	return PTR_ERR(clk);
+}
+
+int bm1880_clk_register_gate(const struct bm1880_gate_clock *clks,
+			     int num_clks, struct bm1880_clock_data *data)
+{
+	struct clk *clk;
+	void __iomem *sys_base = data->sys_base;
+	int i;
+
+	for (i = 0; i < num_clks; i++) {
+		clk = clk_register_gate(NULL, clks[i].name,
+					clks[i].parent,
+					clks[i].flags,
+					sys_base + clks[i].gate_reg,
+					clks[i].gate_shift,
+					0,
+					&bm1880_clk_lock);
+		if (IS_ERR(clk)) {
+			pr_err("%s: failed to register clock %s\n",
+			       __func__, clks[i].name);
+			goto err_clk;
+		}
+
+		data->clk_data.clks[clks[i].id] = clk;
+	}
+
+	return 0;
+
+err_clk:
+	while (i--)
+		clk_unregister_gate(data->clk_data.clks[clks[i].id]);
+
+	return PTR_ERR(clk);
+}
+
+struct clk *bm1880_clk_register_composite(struct bm1880_composite_clock *clks,
+					  void __iomem *sys_base)
+{
+	struct clk *clk;
+	struct clk_mux *mux = NULL;
+	struct clk_gate *gate = NULL;
+	struct bm1880_div_hw_clock *div_hws = NULL;
+	struct clk_hw *mux_hw = NULL, *gate_hw = NULL, *div_hw = NULL;
+	const struct clk_ops *mux_ops = NULL, *gate_ops = NULL, *div_ops = NULL;
+	const char * const *parent_names;
+	const char *parent;
+	int num_parents;
+	int ret;
+
+	if (clks->mux_shift >= 0) {
+		mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+		if (!mux)
+			return ERR_PTR(-ENOMEM);
+
+		mux->reg = sys_base + clks->mux_reg;
+		mux->mask = 1;
+		mux->shift = clks->mux_shift;
+		mux_hw = &mux->hw;
+		mux_ops = &clk_mux_ops;
+		mux->lock = &bm1880_clk_lock;
+
+		parent_names = clks->parents;
+		num_parents = clks->num_parents;
+	} else {
+		parent = clks->parent;
+		parent_names = &parent;
+		num_parents = 1;
+	}
+
+	if (clks->gate_shift >= 0) {
+		gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+		if (!gate) {
+			ret = -ENOMEM;
+			goto err_out;
+		}
+
+		gate->reg = sys_base + clks->gate_reg;
+		gate->bit_idx = clks->gate_shift;
+		gate->lock = &bm1880_clk_lock;
+
+		gate_hw = &gate->hw;
+		gate_ops = &clk_gate_ops;
+	}
+
+	if (clks->div_shift >= 0) {
+		div_hws = kzalloc(sizeof(*div_hws), GFP_KERNEL);
+		if (!div_hws) {
+			ret = -ENOMEM;
+			goto err_out;
+		}
+
+		div_hws->base = sys_base;
+		div_hws->div.reg = clks->div_reg;
+		div_hws->div.shift = clks->div_shift;
+		div_hws->div.width = clks->div_width;
+		div_hws->div.table = clks->table;
+		div_hws->div.initval = clks->div_initval;
+		div_hws->lock = &bm1880_clk_lock;
+		div_hws->div.flags = CLK_DIVIDER_ONE_BASED |
+				     CLK_DIVIDER_ALLOW_ZERO;
+
+		div_hw = &div_hws->hw;
+		div_ops = &bm1880_clk_div_ops;
+	}
+
+	clk = clk_register_composite(NULL, clks->name, parent_names,
+				     num_parents, mux_hw, mux_ops, div_hw,
+				     div_ops, gate_hw, gate_ops, (clks->flags));
+
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		goto err_out;
+	}
+
+	return clk;
+
+err_out:
+	kfree(div_hws);
+	kfree(gate);
+	kfree(mux);
+
+	return ERR_PTR(ret);
+}
+
+int bm1880_clk_register_composites(struct bm1880_composite_clock *clks,
+				   int num_clks, struct bm1880_clock_data *data)
+{
+	struct clk *clk;
+	void __iomem *sys_base = data->sys_base;
+	int i;
+
+	for (i = 0; i < num_clks; i++) {
+		struct bm1880_composite_clock *bm1880_clk = &clks[i];
+
+		clk = bm1880_clk_register_composite(bm1880_clk, sys_base);
+		if (IS_ERR(clk)) {
+			pr_err("%s: failed to register clock %s\n",
+			       __func__, bm1880_clk->name);
+			goto err_clk;
+		}
+
+		data->clk_data.clks[clks[i].id] = clk;
+	}
+
+	return 0;
+
+err_clk:
+	while (i--)
+		clk_unregister_composite(data->clk_data.clks[clks[i].id]);
+
+	return PTR_ERR(clk);
+}
+
+static void bm1880_clk_init(struct device_node *np)
+{
+	struct bm1880_clock_data *clk_data;
+	struct clk **clk_table;
+	void __iomem *pll_base, *sys_base;
+	int num_clks;
+
+	pll_base = of_iomap(np, 0);
+	if (!pll_base) {
+		pr_err("%pOFn: unable to map pll resource", np);
+		of_node_put(np);
+		return;
+	}
+
+	sys_base = of_iomap(np, 1);
+	if (!sys_base) {
+		pr_err("%pOFn: unable to map sys resource", np);
+		of_node_put(np);
+		return;
+	}
+
+	clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
+	if (!clk_data)
+		return;
+
+	clk_data->pll_base = pll_base;
+	clk_data->sys_base = sys_base;
+	num_clks = ARRAY_SIZE(bm1880_gate_clks) +
+		   ARRAY_SIZE(bm1880_composite_clks);
+
+	clk_table = kcalloc(num_clks, sizeof(*clk_table), GFP_KERNEL);
+	if (!clk_table)
+		goto err_out;
+
+	clk_data->clk_data.clks = clk_table;
+	clk_data->clk_data.clk_num = num_clks;
+
+	/* Register PLL clocks */
+	bm1880_clk_register_plls(bm1880_pll_clks,
+				 ARRAY_SIZE(bm1880_pll_clks),
+				 clk_data);
+
+	/* Register Divider clocks */
+	bm1880_clk_register_divs(bm1880_div_clks,
+				 ARRAY_SIZE(bm1880_div_clks),
+				 clk_data);
+
+	/* Register Mux clocks */
+	bm1880_clk_register_mux(bm1880_mux_clks,
+				ARRAY_SIZE(bm1880_mux_clks),
+				clk_data);
+
+	/* Register Composite clocks */
+	bm1880_clk_register_composites(bm1880_composite_clks,
+				       ARRAY_SIZE(bm1880_composite_clks),
+				       clk_data);
+
+	/* Register Gate clocks */
+	bm1880_clk_register_gate(bm1880_gate_clks,
+				 ARRAY_SIZE(bm1880_gate_clks),
+				 clk_data);
+
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data->clk_data);
+
+	return;
+
+err_out:
+	kfree(clk_data);
+}
+
+CLK_OF_DECLARE_DRIVER(bm1880_clk, "bitmain,bm1880-clk", bm1880_clk_init);
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply index

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-05 15:14 [PATCH 0/5] Add Bitmain BM1880 clock driver Manivannan Sadhasivam
2019-07-05 15:14 ` [PATCH 1/5] dt-bindings: clock: Add Bitmain BM1880 SoC clock controller binding Manivannan Sadhasivam
2019-07-24 16:18   ` Rob Herring
2019-08-08  5:01   ` Stephen Boyd
2019-08-17  3:34     ` Manivannan Sadhasivam
2019-08-17  3:46       ` Stephen Boyd
2019-08-17  3:58         ` Manivannan Sadhasivam
2019-08-18  1:16           ` Stephen Boyd
2019-07-05 15:14 ` [PATCH 2/5] arm64: dts: bitmain: Add clock controller support for BM1880 SoC Manivannan Sadhasivam
2019-07-05 15:14 ` [PATCH 3/5] arm64: dts: bitmain: Source common clock for UART controllers Manivannan Sadhasivam
2019-07-05 15:14 ` Manivannan Sadhasivam [this message]
2019-08-08  5:15   ` [PATCH 4/5] clk: Add driver for Bitmain BM1880 SoC clock controller Stephen Boyd
2019-08-17  3:55     ` Manivannan Sadhasivam
2019-08-18  1:21       ` Stephen Boyd
2019-07-05 15:14 ` [PATCH 5/5] MAINTAINERS: Add entry for Bitmain BM1880 SoC clock driver Manivannan Sadhasivam
2019-07-22  6:20 ` [PATCH 0/5] Add Bitmain BM1880 " Manivannan Sadhasivam

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190705151440.20844-5-manivannan.sadhasivam@linaro.org \
    --to=manivannan.sadhasivam@linaro.org \
    --cc=alec.lin@bitmain.com \
    --cc=darren.tsao@bitmain.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fisher.cheng@bitmain.com \
    --cc=haitao.suo@bitmain.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org infradead-linux-arm-kernel@archiver.kernel.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox