From: Jernej Skrabec <jernej.skrabec@siol.net>
To: maxime.ripard@bootlin.com, wens@csie.org
Cc: airlied@linux.ie, linux-kernel@vger.kernel.org,
dri-devel@lists.freedesktop.org, linux-sunxi@googlegroups.com,
daniel@ffwll.ch, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] drm/sun4i: sun8i-csc: Add support for color encoding and range
Date: Sat, 13 Jul 2019 14:03:46 +0200 [thread overview]
Message-ID: <20190713120346.30349-4-jernej.skrabec@siol.net> (raw)
In-Reply-To: <20190713120346.30349-1-jernej.skrabec@siol.net>
Conversion from YUV to RGB depends on range (limited or full) and
encoding (BT.601 or BT.709). Current code doesn't consider this and
always uses BT.601 encoding and limited range.
Fix this by introducing new CSC matrices, which are selected based on
range and encoding parameters.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
drivers/gpu/drm/sun4i/sun8i_csc.c | 144 ++++++++++++++++++++-----
drivers/gpu/drm/sun4i/sun8i_csc.h | 6 +-
drivers/gpu/drm/sun4i/sun8i_vi_layer.c | 4 +-
3 files changed, 126 insertions(+), 28 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun8i_csc.c b/drivers/gpu/drm/sun4i/sun8i_csc.c
index e07b7876d89b..70c792d052fe 100644
--- a/drivers/gpu/drm/sun4i/sun8i_csc.c
+++ b/drivers/gpu/drm/sun4i/sun8i_csc.c
@@ -18,16 +18,59 @@ static const u32 ccsc_base[2][2] = {
* First tree values in each line are multiplication factor and last
* value is constant, which is added at the end.
*/
-static const u32 yuv2rgb[] = {
- 0x000004A8, 0x00000000, 0x00000662, 0xFFFC845A,
- 0x000004A8, 0xFFFFFE6F, 0xFFFFFCBF, 0x00021DF4,
- 0x000004A8, 0x00000813, 0x00000000, 0xFFFBAC4A,
+
+static const u32 yuv2rgb[2][2][12] = {
+ [DRM_COLOR_YCBCR_LIMITED_RANGE] = {
+ [DRM_COLOR_YCBCR_BT601] = {
+ 0x000004A8, 0x00000000, 0x00000662, 0xFFFC8451,
+ 0x000004A8, 0xFFFFFE6F, 0xFFFFFCC0, 0x00021E4D,
+ 0x000004A8, 0x00000811, 0x00000000, 0xFFFBACA9,
+ },
+ [DRM_COLOR_YCBCR_BT709] = {
+ 0x000004A8, 0x00000000, 0x0000072B, 0xFFFC1F99,
+ 0x000004A8, 0xFFFFFF26, 0xFFFFFDDF, 0x00013383,
+ 0x000004A8, 0x00000873, 0x00000000, 0xFFFB7BEF,
+ }
+ },
+ [DRM_COLOR_YCBCR_FULL_RANGE] = {
+ [DRM_COLOR_YCBCR_BT601] = {
+ 0x00000400, 0x00000000, 0x0000059B, 0xFFFD322E,
+ 0x00000400, 0xFFFFFEA0, 0xFFFFFD25, 0x00021DD5,
+ 0x00000400, 0x00000716, 0x00000000, 0xFFFC74BD,
+ },
+ [DRM_COLOR_YCBCR_BT709] = {
+ 0x00000400, 0x00000000, 0x0000064C, 0xFFFCD9B4,
+ 0x00000400, 0xFFFFFF41, 0xFFFFFE21, 0x00014F96,
+ 0x00000400, 0x0000076C, 0x00000000, 0xFFFC49EF,
+ }
+ },
};
-static const u32 yvu2rgb[] = {
- 0x000004A8, 0x00000662, 0x00000000, 0xFFFC845A,
- 0x000004A8, 0xFFFFFCBF, 0xFFFFFE6F, 0x00021DF4,
- 0x000004A8, 0x00000000, 0x00000813, 0xFFFBAC4A,
+static const u32 yvu2rgb[2][2][12] = {
+ [DRM_COLOR_YCBCR_LIMITED_RANGE] = {
+ [DRM_COLOR_YCBCR_BT601] = {
+ 0x000004A8, 0x00000662, 0x00000000, 0xFFFC8451,
+ 0x000004A8, 0xFFFFFCC0, 0xFFFFFE6F, 0x00021E4D,
+ 0x000004A8, 0x00000000, 0x00000811, 0xFFFBACA9,
+ },
+ [DRM_COLOR_YCBCR_BT709] = {
+ 0x000004A8, 0x0000072B, 0x00000000, 0xFFFC1F99,
+ 0x000004A8, 0xFFFFFDDF, 0xFFFFFF26, 0x00013383,
+ 0x000004A8, 0x00000000, 0x00000873, 0xFFFB7BEF,
+ }
+ },
+ [DRM_COLOR_YCBCR_FULL_RANGE] = {
+ [DRM_COLOR_YCBCR_BT601] = {
+ 0x00000400, 0x0000059B, 0x00000000, 0xFFFD322E,
+ 0x00000400, 0xFFFFFD25, 0xFFFFFEA0, 0x00021DD5,
+ 0x00000400, 0x00000000, 0x00000716, 0xFFFC74BD,
+ },
+ [DRM_COLOR_YCBCR_BT709] = {
+ 0x00000400, 0x0000064C, 0x00000000, 0xFFFCD9B4,
+ 0x00000400, 0xFFFFFE21, 0xFFFFFF41, 0x00014F96,
+ 0x00000400, 0x00000000, 0x0000076C, 0xFFFC49EF,
+ }
+ },
};
/*
@@ -53,30 +96,74 @@ static const u32 yvu2rgb[] = {
* c20 c21 c22 [d2 const2]
*/
-static const u32 yuv2rgb_de3[] = {
- 0x0002542a, 0x00000000, 0x0003312a, 0xffc00000,
- 0x0002542a, 0xffff376b, 0xfffe5fc3, 0xfe000000,
- 0x0002542a, 0x000408d3, 0x00000000, 0xfe000000,
+static const u32 yuv2rgb_de3[2][2][12] = {
+ [DRM_COLOR_YCBCR_LIMITED_RANGE] = {
+ [DRM_COLOR_YCBCR_BT601] = {
+ 0x0002542A, 0x00000000, 0x0003312A, 0xFFC00000,
+ 0x0002542A, 0xFFFF376B, 0xFFFE5FC3, 0xFE000000,
+ 0x0002542A, 0x000408D2, 0x00000000, 0xFE000000,
+ },
+ [DRM_COLOR_YCBCR_BT709] = {
+ 0x0002542A, 0x00000000, 0x000395E2, 0xFFC00000,
+ 0x0002542A, 0xFFFF92D2, 0xFFFEEF27, 0xFE000000,
+ 0x0002542A, 0x0004398C, 0x00000000, 0xFE000000,
+ }
+ },
+ [DRM_COLOR_YCBCR_FULL_RANGE] = {
+ [DRM_COLOR_YCBCR_BT601] = {
+ 0x00020000, 0x00000000, 0x0002CDD2, 0x00000000,
+ 0x00020000, 0xFFFF4FCE, 0xFFFE925D, 0xFE000000,
+ 0x00020000, 0x00038B43, 0x00000000, 0xFE000000,
+ },
+ [DRM_COLOR_YCBCR_BT709] = {
+ 0x00020000, 0x00000000, 0x0003264C, 0x00000000,
+ 0x00020000, 0xFFFFA018, 0xFFFF1053, 0xFE000000,
+ 0x00020000, 0x0003B611, 0x00000000, 0xFE000000,
+ }
+ },
};
-static const u32 yvu2rgb_de3[] = {
- 0x0002542a, 0x0003312a, 0x00000000, 0xffc00000,
- 0x0002542a, 0xfffe5fc3, 0xffff376b, 0xfe000000,
- 0x0002542a, 0x00000000, 0x000408d3, 0xfe000000,
+static const u32 yvu2rgb_de3[2][2][12] = {
+ [DRM_COLOR_YCBCR_LIMITED_RANGE] = {
+ [DRM_COLOR_YCBCR_BT601] = {
+ 0x0002542A, 0x0003312A, 0x00000000, 0xFFC00000,
+ 0x0002542A, 0xFFFE5FC3, 0xFFFF376B, 0xFE000000,
+ 0x0002542A, 0x00000000, 0x000408D2, 0xFE000000,
+ },
+ [DRM_COLOR_YCBCR_BT709] = {
+ 0x0002542A, 0x000395E2, 0x00000000, 0xFFC00000,
+ 0x0002542A, 0xFFFEEF27, 0xFFFF92D2, 0xFE000000,
+ 0x0002542A, 0x00000000, 0x0004398C, 0xFE000000,
+ }
+ },
+ [DRM_COLOR_YCBCR_FULL_RANGE] = {
+ [DRM_COLOR_YCBCR_BT601] = {
+ 0x00020000, 0x0002CDD2, 0x00000000, 0x00000000,
+ 0x00020000, 0xFFFE925D, 0xFFFF4FCE, 0xFE000000,
+ 0x00020000, 0x00000000, 0x00038B43, 0xFE000000,
+ },
+ [DRM_COLOR_YCBCR_BT709] = {
+ 0x00020000, 0x0003264C, 0x00000000, 0x00000000,
+ 0x00020000, 0xFFFF1053, 0xFFFFA018, 0xFE000000,
+ 0x00020000, 0x00000000, 0x0003B611, 0xFE000000,
+ }
+ },
};
static void sun8i_csc_set_coefficients(struct regmap *map, u32 base,
- enum sun8i_csc_mode mode)
+ enum sun8i_csc_mode mode,
+ enum drm_color_encoding encoding,
+ enum drm_color_range range)
{
const u32 *table;
u32 base_reg;
switch (mode) {
case SUN8I_CSC_MODE_YUV2RGB:
- table = yuv2rgb;
+ table = yuv2rgb[range][encoding];
break;
case SUN8I_CSC_MODE_YVU2RGB:
- table = yvu2rgb;
+ table = yvu2rgb[range][encoding];
break;
default:
DRM_WARN("Wrong CSC mode specified.\n");
@@ -88,17 +175,19 @@ static void sun8i_csc_set_coefficients(struct regmap *map, u32 base,
}
static void sun8i_de3_ccsc_set_coefficients(struct regmap *map, int layer,
- enum sun8i_csc_mode mode)
+ enum sun8i_csc_mode mode,
+ enum drm_color_encoding encoding,
+ enum drm_color_range range)
{
const u32 *table;
u32 base_reg;
switch (mode) {
case SUN8I_CSC_MODE_YUV2RGB:
- table = yuv2rgb_de3;
+ table = yuv2rgb_de3[range][encoding];
break;
case SUN8I_CSC_MODE_YVU2RGB:
- table = yvu2rgb_de3;
+ table = yvu2rgb_de3[range][encoding];
break;
default:
DRM_WARN("Wrong CSC mode specified.\n");
@@ -137,19 +226,22 @@ static void sun8i_de3_ccsc_enable(struct regmap *map, int layer, bool enable)
}
void sun8i_csc_set_ccsc_coefficients(struct sun8i_mixer *mixer, int layer,
- enum sun8i_csc_mode mode)
+ enum sun8i_csc_mode mode,
+ enum drm_color_encoding encoding,
+ enum drm_color_range range)
{
u32 base;
if (mixer->cfg->is_de3) {
- sun8i_de3_ccsc_set_coefficients(mixer->engine.regs,
- layer, mode);
+ sun8i_de3_ccsc_set_coefficients(mixer->engine.regs, layer,
+ mode, encoding, range);
return;
}
base = ccsc_base[mixer->cfg->ccsc][layer];
- sun8i_csc_set_coefficients(mixer->engine.regs, base, mode);
+ sun8i_csc_set_coefficients(mixer->engine.regs, base,
+ mode, encoding, range);
}
void sun8i_csc_enable_ccsc(struct sun8i_mixer *mixer, int layer, bool enable)
diff --git a/drivers/gpu/drm/sun4i/sun8i_csc.h b/drivers/gpu/drm/sun4i/sun8i_csc.h
index dce4c444bcd6..f42441b1b14d 100644
--- a/drivers/gpu/drm/sun4i/sun8i_csc.h
+++ b/drivers/gpu/drm/sun4i/sun8i_csc.h
@@ -6,6 +6,8 @@
#ifndef _SUN8I_CSC_H_
#define _SUN8I_CSC_H_
+#include <drm/drm_color_mgmt.h>
+
struct sun8i_mixer;
/* VI channel CSC units offsets */
@@ -26,7 +28,9 @@ enum sun8i_csc_mode {
};
void sun8i_csc_set_ccsc_coefficients(struct sun8i_mixer *mixer, int layer,
- enum sun8i_csc_mode mode);
+ enum sun8i_csc_mode mode,
+ enum drm_color_encoding encoding,
+ enum drm_color_range range);
void sun8i_csc_enable_ccsc(struct sun8i_mixer *mixer, int layer, bool enable);
#endif
diff --git a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
index 240a800217df..011924a75263 100644
--- a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
+++ b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
@@ -232,7 +232,9 @@ static int sun8i_vi_layer_update_formats(struct sun8i_mixer *mixer, int channel,
SUN8I_MIXER_CHAN_VI_LAYER_ATTR_FBFMT_MASK, val);
if (fmt_info->csc != SUN8I_CSC_MODE_OFF) {
- sun8i_csc_set_ccsc_coefficients(mixer, channel, fmt_info->csc);
+ sun8i_csc_set_ccsc_coefficients(mixer, channel, fmt_info->csc,
+ state->color_encoding,
+ state->color_range);
sun8i_csc_enable_ccsc(mixer, channel, true);
} else {
sun8i_csc_enable_ccsc(mixer, channel, false);
--
2.22.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-07-13 12:04 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-13 12:03 [PATCH 0/3] drm/sun4i: Add support for color encoding and range Jernej Skrabec
2019-07-13 12:03 ` [PATCH 1/3] drm/sun4i: Introduce color encoding and range properties Jernej Skrabec
2019-07-13 12:03 ` [PATCH 2/3] drm/sun4i: sun8i_csc: Simplify register writes Jernej Skrabec
2019-07-13 12:03 ` Jernej Skrabec [this message]
2019-07-20 5:42 ` [PATCH 0/3] drm/sun4i: Add support for color encoding and range Maxime Ripard
2019-07-20 16:03 ` Jernej Škrabec
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190713120346.30349-4-jernej.skrabec@siol.net \
--to=jernej.skrabec@siol.net \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@bootlin.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).