Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: shawnguo@kernel.org, s.hauer@pengutronix.de, robh+dt@kernel.org
Cc: devicetree@vger.kernel.org, kinjan.patel@einfochips.com,
	linux-kernel@vger.kernel.org, Darshak.Patel@einfochips.com,
	linux-imx@nxp.com, kernel@pengutronix.de,
	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
	festevam@gmail.com, linux-arm-kernel@lists.infradead.org,
	prajose.john@einfochips.com
Subject: [PATCH 3/3] arm64: dts: freescale: Add support for i.MX8QXP AI_ML board
Date: Wed, 17 Jul 2019 11:40:39 +0530
Message-ID: <20190717061039.9271-4-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20190717061039.9271-1-manivannan.sadhasivam@linaro.org>

Add support for i.MX8QXP AI_ML board from Einfochips. This board is one
of the Consumer Edition boards of the 96Boards family based on i.MX8QXP
SoC from NXP/Freescale.

The initial support includes following peripherals which are tested and
known to be working:

1. Debug serial via UART2
2. uSD
3. WiFi
4. Ethernet

More information about this board can be found in Arrow website:
https://www.arrow.com/en/products/imx8-ai-ml/arrow-development-tools

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/imx8qxp-ai_ml.dts      | 249 ++++++++++++++++++
 2 files changed, 250 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 0bd122f60549..bd8460549d1a 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -24,4 +24,5 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
new file mode 100644
index 000000000000..dcd36e57d916
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 Einfochips
+ * Copyright 2019 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "imx8qxp.dtsi"
+
+/ {
+	model = "Einfochips i.MX8QXP AI_ML";
+	compatible = "einfochips,imx8qxp-ai_ml", "fsl,imx8qxp";
+
+	aliases {
+		serial1 = &adma_lpuart1;
+		serial2 = &adma_lpuart2;
+		serial3 = &adma_lpuart3;
+	};
+
+	chosen {
+		stdout-path = &adma_lpuart2;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		user_led1 {
+			label = "green:user1";
+			gpios = <&lsio_gpio4 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user_led2 {
+			label = "green:user2";
+			gpios = <&lsio_gpio0 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+		};
+
+		user_led3 {
+			label = "green:user3";
+			gpios = <&lsio_gpio0 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		user_led4 {
+			label = "green:user4";
+			gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+			linux,default-trigger = "none";
+		};
+
+		wlan_active_led {
+			label = "yellow:wlan";
+			gpios = <&lsio_gpio4 17 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		bt_active_led {
+			label = "blue:bt";
+			gpios = <&lsio_gpio4 18 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_reg_on>;
+		reset-gpios = <&lsio_gpio3 24 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* BT */
+&adma_lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* LS-I2C0 */
+&adma_lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+	status = "okay";
+};
+
+/* Debug */
+&adma_lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart2>;
+	status = "okay";
+};
+
+/* PCI-E */
+&adma_lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart3>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+/* WiFi */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	no-sd;
+	non-removable;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			IMX8QXP_ENET0_MDC_CONN_ENET0_MDC			0x06000020
+			IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO			0x06000020
+			IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x06000020
+			IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC		0x06000020
+			IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0		0x06000020
+			IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1		0x06000020
+			IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2		0x06000020
+			IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3		0x06000020
+			IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC		0x06000020
+			IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x06000020
+			IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0		0x06000020
+			IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1		0x06000020
+			IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2		0x06000020
+			IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3		0x06000020
+		>;
+	};
+
+	pinctrl_leds: ledsgrp{
+		fsl,pins = <
+			IMX8QXP_ESAI0_TX2_RX3_LSIO_GPIO0_IO06			0x00000021
+			IMX8QXP_ESAI0_TX3_RX2_LSIO_GPIO0_IO07			0x00000021
+			IMX8QXP_EMMC0_DATA7_LSIO_GPIO4_IO16			0x00000021
+			IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21			0x00000021
+			IMX8QXP_EMMC0_STROBE_LSIO_GPIO4_IO17			0x00000021
+			IMX8QXP_EMMC0_RESET_B_LSIO_GPIO4_IO18			0x00000021
+		>;
+	};
+
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <
+			IMX8QXP_UART0_RX_ADMA_UART0_RX				0X06000020
+			IMX8QXP_UART0_TX_ADMA_UART0_TX				0X06000020
+			IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B 			0x06000020
+			IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B			0x06000020
+		>;
+	};
+
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <
+			IMX8QXP_UART1_RX_ADMA_UART1_RX				0X06000020
+			IMX8QXP_UART1_TX_ADMA_UART1_TX				0X06000020
+		>;
+	};
+
+	pinctrl_lpuart2: lpuart2grp {
+		fsl,pins = <
+			IMX8QXP_UART2_RX_ADMA_UART2_RX				0X06000020
+			IMX8QXP_UART2_TX_ADMA_UART2_TX				0X06000020
+		>;
+	};
+
+	pinctrl_lpuart3: lpuart3grp {
+		fsl,pins = <
+			IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX			0X06000020
+			IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX			0X06000020
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041
+			IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD			0x00000021
+			IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0			0x00000021
+			IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1			0x00000021
+			IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2			0x00000021
+			IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3			0x00000021
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041
+			IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD			0x00000021
+			IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0			0x00000021
+			IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1			0x00000021
+			IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2			0x00000021
+			IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3			0x00000021
+			IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021
+			IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22			0x00000021
+		>;
+	};
+
+	pinctrl_wifi_reg_on: wifiregongrp {
+		fsl,pins = <
+			IMX8QXP_QSPI0B_SS1_B_LSIO_GPIO3_IO24			0x00000021
+		>;
+	};
+};
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply index

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-17  6:10 [PATCH 0/3] Add support for i.MXQXP " Manivannan Sadhasivam
2019-07-17  6:10 ` [PATCH 1/3] dt-bindings: Add Vendor prefix for Einfochips Manivannan Sadhasivam
2019-07-17 10:26   ` Aisheng Dong
2019-07-17  6:10 ` [PATCH 2/3] dt-bindings: arm: Document i.MX8QXP AI_ML board binding Manivannan Sadhasivam
2019-07-17 10:28   ` Aisheng Dong
2019-07-17  6:10 ` Manivannan Sadhasivam [this message]
2019-07-17 10:40   ` [PATCH 3/3] arm64: dts: freescale: Add support for i.MX8QXP AI_ML board Aisheng Dong
2019-07-17 11:34     ` Manivannan Sadhasivam
2019-07-18  3:03       ` Aisheng Dong

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190717061039.9271-4-manivannan.sadhasivam@linaro.org \
    --to=manivannan.sadhasivam@linaro.org \
    --cc=Darshak.Patel@einfochips.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=kinjan.patel@einfochips.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=prajose.john@einfochips.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org infradead-linux-arm-kernel@archiver.kernel.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox