linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] ARM: dts: ux500: Fix up the thermal nodes
@ 2019-07-17  6:42 Linus Walleij
  0 siblings, 0 replies; only message in thread
From: Linus Walleij @ 2019-07-17  6:42 UTC (permalink / raw)
  To: linux-arm-kernel; +Cc: Linus Walleij

The thermal driver for the DB8500 was never properly converted
to device tree, the node should definately be activated for
all board variants so move this down into the main SoC
DTSI and and default on.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/boot/dts/ste-dbx5x0.dtsi  | 22 +++++++++++++++++++++-
 arch/arm/boot/dts/ste-snowball.dts | 29 -----------------------------
 2 files changed, 21 insertions(+), 30 deletions(-)

diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 339da70d4e83..90dcbc3a29c3 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -505,10 +505,30 @@
 			thermal@801573c0 {
 				compatible = "stericsson,db8500-thermal";
 				reg = <0x801573c0 0x40>;
+				interrupt-parent = <&prcmu>;
 				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>,
 					     <22 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
-				status = "disabled";
+				num-trips = <4>;
+
+				trip0-temp = <70000>;
+				trip0-type = "active";
+				trip0-cdev-num = <1>;
+				trip0-cdev-name0 = "thermal-cpufreq-0";
+
+				trip1-temp = <75000>;
+				trip1-type = "active";
+				trip1-cdev-num = <1>;
+				trip1-cdev-name0 = "thermal-cpufreq-0";
+
+				trip2-temp = <80000>;
+				trip2-type = "active";
+				trip2-cdev-num = <1>;
+				trip2-cdev-name0 = "thermal-cpufreq-0";
+
+				trip3-temp = <85000>;
+				trip3-type = "critical";
+				trip3-cdev-num = <0>;
 			};
 
 			db8500-prcmu-regulators {
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 3428290644ba..064e8abec954 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -376,40 +376,11 @@
 			pinctrl-0 = <&ssp0_snowball_mode>;
 		};
 
-		cpufreq-cooling {
-			status = "okay";
-		};
-
 		prcmu@80157000 {
 			cpufreq {
 				status = "okay";
 			};
 
-			thermal@801573c0 {
-				num-trips = <4>;
-
-				trip0-temp = <70000>;
-				trip0-type = "active";
-				trip0-cdev-num = <1>;
-				trip0-cdev-name0 = "thermal-cpufreq-0";
-
-				trip1-temp = <75000>;
-				trip1-type = "active";
-				trip1-cdev-num = <1>;
-				trip1-cdev-name0 = "thermal-cpufreq-0";
-
-				trip2-temp = <80000>;
-				trip2-type = "active";
-				trip2-cdev-num = <1>;
-				trip2-cdev-name0 = "thermal-cpufreq-0";
-
-				trip3-temp = <85000>;
-				trip3-type = "critical";
-				trip3-cdev-num = <0>;
-
-				status = "okay";
-			};
-
 			ab8500 {
 				ab8500-gpio {
 					/*
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] only message in thread

only message in thread, other threads:[~2019-07-17  6:44 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-17  6:42 [PATCH] ARM: dts: ux500: Fix up the thermal nodes Linus Walleij

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).