Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Maxime Ripard <maxime.ripard@bootlin.com>
To: Michael Nazzareno Trimarchi <michael@amarulasolutions.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree <devicetree@vger.kernel.org>,
	David Airlie <airlied@linux.ie>,
	Michael Turquette <mturquette@baylibre.com>,
	linux-sunxi <linux-sunxi@googlegroups.com>,
	linux-kernel <linux-kernel@vger.kernel.org>,
	dri-devel <dri-devel@lists.freedesktop.org>,
	Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>,
	Jagan Teki <jagan@amarulasolutions.com>,
	Daniel Vetter <daniel@ffwll.ch>,
	linux-amarula <linux-amarula@amarulasolutions.com>,
	linux-clk <linux-clk@vger.kernel.org>,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v6 11/22] clk: sunxi-ng: a64: Add minimum rate for PLL_MIPI
Date: Sat, 20 Jul 2019 08:58:30 +0200
Message-ID: <20190720065830.zn3txpyduakywcva@flea> (raw)
In-Reply-To: <CAOf5uw=3fiMuhcj3kDtCaGNTsxHKRrYb79MXZ+yUZtmf0jU10A@mail.gmail.com>

[-- Attachment #1.1: Type: text/plain, Size: 4590 bytes --]

On Thu, Jul 11, 2019 at 07:43:16PM +0200, Michael Nazzareno Trimarchi wrote:
> > > tcon-pixel clock is the rate that you want to achive on display side
> > > and if you have 4 lanes 32bit or lanes and different bit number that
> > > you need to have a clock that is able to put outside bits and speed
> > > equal to pixel-clock * bits / lanes. so If you want a pixel-clock of
> > > 40 mhz and you have 32bits and 4 lanes you need to have a clock of
> > > 40 * 32 / 4 in no-burst mode. I think that this is done but most of
> > > the display.
> >
> > So this is what the issue is then?
> >
> > This one does make sense, and you should just change the rate in the
> > call to clk_set_rate in sun4i_tcon0_mode_set_cpu.
> >
> > I'm still wondering why that hasn't been brought up in either the
> > discussion or the commit log before though.
> >
> Something like this?
>
> drivers/gpu/drm/sun4i/sun4i_tcon.c     | 20 +++++++++++---------
>  drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h |  2 --
>  2 files changed, 11 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c
> b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> index 64c43ee6bd92..42560d5c327c 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> @@ -263,10 +263,11 @@ static int sun4i_tcon_get_clk_delay(const struct
> drm_display_mode *mode,
>  }
>
>  static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon,
> -                                       const struct drm_display_mode *mode)
> +                                       const struct drm_display_mode *mode,
> +                                       u32 tcon_mul)
>  {
>         /* Configure the dot clock */
> -       clk_set_rate(tcon->dclk, mode->crtc_clock * 1000);
> +       clk_set_rate(tcon->dclk, mode->crtc_clock * tcon_mul * 1000);
>
>         /* Set the resolution */
>         regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG,
> @@ -335,12 +336,13 @@ static void sun4i_tcon0_mode_set_cpu(struct
> sun4i_tcon *tcon,
>         u8 bpp = mipi_dsi_pixel_format_to_bpp(device->format);
>         u8 lanes = device->lanes;
>         u32 block_space, start_delay;
> -       u32 tcon_div;
> +       u32 tcon_div, tcon_mul;
>
> -       tcon->dclk_min_div = SUN6I_DSI_TCON_DIV;
> -       tcon->dclk_max_div = SUN6I_DSI_TCON_DIV;
> +       tcon->dclk_min_div = 4;
> +       tcon->dclk_max_div = 127;
>
> -       sun4i_tcon0_mode_set_common(tcon, mode);
> +       tcon_mul = bpp / lanes;
> +       sun4i_tcon0_mode_set_common(tcon, mode, tcon_mul);
>
>         /* Set dithering if needed */
>         sun4i_tcon0_mode_set_dithering(tcon, sun4i_tcon_get_connector(encoder));
> @@ -366,7 +368,7 @@ static void sun4i_tcon0_mode_set_cpu(struct
> sun4i_tcon *tcon,
>          */
>         regmap_read(tcon->regs, SUN4I_TCON0_DCLK_REG, &tcon_div);
>         tcon_div &= GENMASK(6, 0);
> -       block_space = mode->htotal * bpp / (tcon_div * lanes);
> +       block_space = mode->htotal * tcon_div * tcon_mul;
>         block_space -= mode->hdisplay + 40;
>
>         regmap_write(tcon->regs, SUN4I_TCON0_CPU_TRI0_REG,
> @@ -408,7 +410,7 @@ static void sun4i_tcon0_mode_set_lvds(struct
> sun4i_tcon *tcon,
>
>         tcon->dclk_min_div = 7;
>         tcon->dclk_max_div = 7;
> -       sun4i_tcon0_mode_set_common(tcon, mode);
> +       sun4i_tcon0_mode_set_common(tcon, mode, 1);
>
>         /* Set dithering if needed */
>         sun4i_tcon0_mode_set_dithering(tcon, sun4i_tcon_get_connector(encoder));
> @@ -487,7 +489,7 @@ static void sun4i_tcon0_mode_set_rgb(struct
> sun4i_tcon *tcon,
>
>         tcon->dclk_min_div = 6;
>         tcon->dclk_max_div = 127;
> -       sun4i_tcon0_mode_set_common(tcon, mode);
> +       sun4i_tcon0_mode_set_common(tcon, mode, 1);
>
>         /* Set dithering if needed */
>         sun4i_tcon0_mode_set_dithering(tcon, connector);
> diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
> b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
> index 5c3ad5be0690..a07090579f84 100644
> --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
> +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
> @@ -13,8 +13,6 @@
>  #include <drm/drm_encoder.h>
>  #include <drm/drm_mipi_dsi.h>
>
> -#define SUN6I_DSI_TCON_DIV     4
> -
>  struct sun6i_dsi {
>         struct drm_connector    connector;
>         struct drm_encoder      encoder;

I had more something like this in mind:
http://code.bulix.org/nlp5a4-803511

You really don't need to change the divider range (or this is another
issue that the one you mentionned).

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply index

Thread overview: 66+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-24 19:58 [PATCH v6 00/22] drm/sun4i: Allwinner A64 MIPI-DSI support Jagan Teki
2019-01-24 19:58 ` [PATCH v6 01/22] drm/sun4i: sun6i_mipi_dsi: Compute burst mode loop N1 instruction delay Jagan Teki
2019-01-24 19:58 ` [PATCH v6 02/22] drm/sun4i: sun6i_mipi_dsi: Support instruction loop selection Jagan Teki
2019-01-24 19:58 ` [PATCH v6 03/22] drm/sun4i: sun6i_mipi_dsi: Setup burst mode timings Jagan Teki
2019-01-24 19:58 ` [PATCH v6 04/22] drm/sun4i: sun6i_mipi_dsi: Simplify drq to support all modes Jagan Teki
2019-01-24 19:58 ` [PATCH v6 05/22] drm/sun4i: tcon: Export get tcon0 routine Jagan Teki
2019-01-24 19:58 ` [PATCH v6 06/22] drm/sun4i: sun6i_mipi_dsi: Probe tcon0 during dsi_bind Jagan Teki
2019-01-24 19:58 ` [PATCH v6 07/22] drm/sun4i: sun6i_mipi_dsi: Setup burst mode Jagan Teki
2019-01-24 19:58 ` [PATCH v6 08/22] drm/sun4i: sun6i_mipi_dsi: Enable 2byte trail for 4-lane " Jagan Teki
2019-01-24 19:58 ` [PATCH v6 09/22] drm/sun4i: sun6i_mipi_dsi: Enable burst mode HBP, HSA_HSE Jagan Teki
2019-01-24 19:58 ` [PATCH v6 10/22] clk: sunxi-ng: Add check for minimal rate to NKM PLLs Jagan Teki
2019-01-24 19:58 ` [PATCH v6 11/22] clk: sunxi-ng: a64: Add minimum rate for PLL_MIPI Jagan Teki
2019-01-25 21:24   ` Maxime Ripard
2019-01-28  9:36     ` Jagan Teki
2019-01-29 15:13       ` Maxime Ripard
2019-01-29 17:31         ` Jagan Teki
2019-02-01 14:31           ` Maxime Ripard
2019-02-01 16:33             ` Jagan Teki
2019-02-11 14:07             ` Jagan Teki
2019-02-12  9:30               ` Maxime Ripard
2019-02-12  9:38                 ` Jagan Teki
2019-05-24 10:07             ` Jagan Teki
2019-06-05  6:49               ` Maxime Ripard
2019-06-05  7:33                 ` Jagan Teki
2019-06-14 14:24                   ` Maxime Ripard
2019-06-20 18:27                     ` Jagan Teki
2019-06-25 14:49                       ` Maxime Ripard
2019-06-25 15:30                         ` Jagan Teki
2019-07-03 11:49                           ` Maxime Ripard
2019-07-05 17:52                             ` Michael Nazzareno Trimarchi
2019-07-11 10:01                               ` Maxime Ripard
2019-07-11 17:43                                 ` Michael Nazzareno Trimarchi
2019-07-11 19:34                                   ` Michael Nazzareno Trimarchi
2019-07-20  6:58                                   ` Maxime Ripard [this message]
2019-07-20  7:16                                     ` Jagan Teki
2019-07-20  7:34                                       ` Jagan Teki
2019-07-20  9:32                                       ` Maxime Ripard
2019-07-20  9:42                                         ` Michael Nazzareno Trimarchi
2019-07-22 10:21                                         ` Jagan Teki
2019-07-22 10:25                                           ` Michael Nazzareno Trimarchi
2019-07-22 10:38                                             ` Jagan Teki
2019-07-24  9:05                                           ` Maxime Ripard
2019-07-29  6:59                                             ` Michael Nazzareno Trimarchi
2019-08-02  8:38                                               ` Michael Nazzareno Trimarchi
2019-08-13  6:05                                               ` Maxime Ripard
2019-08-15 12:25                                                 ` Michael Nazzareno Trimarchi
2019-08-28 13:03                                                   ` Maxime Ripard
2019-08-28 13:09                                                     ` Michael Nazzareno Trimarchi
2019-01-24 19:58 ` [PATCH v6 12/22] dt-bindings: sun6i-dsi: Add VCC-DSI supply property Jagan Teki
2019-01-25 15:47   ` Maxime Ripard
2019-01-24 19:58 ` [PATCH v6 13/22] drm/sun4i: sun6i_mipi_dsi: Add support for VCC-DSI voltage regulator Jagan Teki
2019-01-24 19:58 ` [PATCH v6 14/22] dt-bindings: sun6i-dsi: Add A64 DSI compatible (w/ A31 fallback) Jagan Teki
2019-01-25 15:52   ` Maxime Ripard
2019-01-26 16:09     ` [linux-sunxi] " Jagan Teki
2019-01-29 14:54       ` Maxime Ripard
2019-01-24 19:58 ` [PATCH v6 15/22] dt-bindings: sun6i-dsi: Add A64 DPHY " Jagan Teki
2019-01-25 15:52   ` Maxime Ripard
2019-01-24 19:58 ` [PATCH v6 16/22] arm64: dts: allwinner: a64: Add DSI pipeline Jagan Teki
2019-01-25 18:51   ` Maxime Ripard
2019-01-24 19:58 ` [DO NOT MERGE] [PATCH v6 17/22] arm64: allwinner: a64: pine64-lts: Enable Feiyang FY07024DI26A30-D DSI panel Jagan Teki
2019-01-24 19:58 ` [PATCH v6 18/22] drm/sun4i: sun6i_mipi_dsi: Add DSI Generic short write 2 param transfer Jagan Teki
2019-01-24 19:58 ` [DO NOT MERGE] [PATCH v6 19/22] arm64: dts: allwinner: bananapi-m64: Bananapi S070WV20-CT16 DSI panel Jagan Teki
2019-01-24 19:58 ` [PATCH v6 20/22] drm/sun4i: sun6i_mipi_dsi: Fix DSI hbp timing value Jagan Teki
2019-01-24 19:58 ` [PATCH v6 21/22] drm/sun4i: sun6i_mipi_dsi: Fix DSI hfp " Jagan Teki
2019-01-24 19:59 ` [PATCH v6 22/22] arm64: dts: allwinner: a64-amarula-relic: Add Techstar TS8550B MIPI-DSI panel Jagan Teki
2019-01-24 23:12 ` [PATCH v6 00/22] drm/sun4i: Allwinner A64 MIPI-DSI support Merlijn Wajer

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190720065830.zn3txpyduakywcva@flea \
    --to=maxime.ripard@bootlin.com \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jagan@amarulasolutions.com \
    --cc=linux-amarula@amarulasolutions.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=mark.rutland@arm.com \
    --cc=michael@amarulasolutions.com \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org infradead-linux-arm-kernel@archiver.kernel.org
	public-inbox-index linux-arm-kernel


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox