From: Alexandre Mergnat <amergnat@baylibre.com>
To: jbrunet@baylibre.com
Cc: narmstrong@baylibre.com, sboyd@kernel.org, khilman@baylibre.com,
Alexandre Mergnat <amergnat@baylibre.com>,
linux-kernel@vger.kernel.org, baylibre-upstreaming@groups.io,
linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/4] clk: meson: g12a-aoclk: migrate to the new parent description method
Date: Mon, 22 Jul 2019 11:50:50 +0200 [thread overview]
Message-ID: <20190722095053.14104-2-amergnat@baylibre.com> (raw)
In-Reply-To: <20190722095053.14104-1-amergnat@baylibre.com>
This clock controller use the string comparison method to describe parent
relation between the clocks, which is not optimized.
Migrate to the new way by using .parent_hws where possible (when parent
clocks are localy declared in the controller) and use .parent_data
otherwise.
Remove clk input helper and all bypass clocks (declared in probe function)
which are no longer used since we are able to use device-tree clock name
directly.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
---
drivers/clk/meson/g12a-aoclk.c | 81 +++++++++++++++++++++-------------
1 file changed, 50 insertions(+), 31 deletions(-)
diff --git a/drivers/clk/meson/g12a-aoclk.c b/drivers/clk/meson/g12a-aoclk.c
index 1994e735396b..62499563e4f5 100644
--- a/drivers/clk/meson/g12a-aoclk.c
+++ b/drivers/clk/meson/g12a-aoclk.c
@@ -18,8 +18,6 @@
#include "clk-regmap.h"
#include "clk-dualdiv.h"
-#define IN_PREFIX "ao-in-"
-
/*
* AO Configuration Clock registers offsets
* Register offsets from the data sheet must be multiplied by 4.
@@ -51,7 +49,9 @@ static struct clk_regmap g12a_aoclk_##_name = { \
.hw.init = &(struct clk_init_data) { \
.name = "g12a_ao_" #_name, \
.ops = &clk_regmap_gate_ops, \
- .parent_names = (const char *[]){ IN_PREFIX "mpeg-clk" }, \
+ .parent_data = &(const struct clk_parent_data) { \
+ .fw_name = "mpeg-clk", \
+ }, \
.num_parents = 1, \
.flags = CLK_IGNORE_UNUSED, \
}, \
@@ -81,7 +81,9 @@ static struct clk_regmap g12a_aoclk_cts_oscin = {
.hw.init = &(struct clk_init_data){
.name = "cts_oscin",
.ops = &clk_regmap_gate_ro_ops,
- .parent_names = (const char *[]){ IN_PREFIX "xtal" },
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "xtal",
+ },
.num_parents = 1,
},
};
@@ -106,7 +108,9 @@ static struct clk_regmap g12a_aoclk_32k_by_oscin_pre = {
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_32k_by_oscin_pre",
.ops = &clk_regmap_gate_ops,
- .parent_names = (const char *[]){ "cts_oscin" },
+ .parent_hws = (const struct clk_hw *[]) {
+ &g12a_aoclk_cts_oscin.hw
+ },
.num_parents = 1,
},
};
@@ -143,7 +147,9 @@ static struct clk_regmap g12a_aoclk_32k_by_oscin_div = {
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_32k_by_oscin_div",
.ops = &meson_clk_dualdiv_ops,
- .parent_names = (const char *[]){ "g12a_ao_32k_by_oscin_pre" },
+ .parent_hws = (const struct clk_hw *[]) {
+ &g12a_aoclk_32k_by_oscin_pre.hw
+ },
.num_parents = 1,
},
};
@@ -158,8 +164,10 @@ static struct clk_regmap g12a_aoclk_32k_by_oscin_sel = {
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_32k_by_oscin_sel",
.ops = &clk_regmap_mux_ops,
- .parent_names = (const char *[]){ "g12a_ao_32k_by_oscin_div",
- "g12a_ao_32k_by_oscin_pre" },
+ .parent_hws = (const struct clk_hw *[]) {
+ &g12a_aoclk_32k_by_oscin_div.hw,
+ &g12a_aoclk_32k_by_oscin_pre.hw,
+ },
.num_parents = 2,
.flags = CLK_SET_RATE_PARENT,
},
@@ -173,7 +181,9 @@ static struct clk_regmap g12a_aoclk_32k_by_oscin = {
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_32k_by_oscin",
.ops = &clk_regmap_gate_ops,
- .parent_names = (const char *[]){ "g12a_ao_32k_by_oscin_sel" },
+ .parent_hws = (const struct clk_hw *[]) {
+ &g12a_aoclk_32k_by_oscin_sel.hw
+ },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
@@ -189,7 +199,9 @@ static struct clk_regmap g12a_aoclk_cec_pre = {
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_cec_pre",
.ops = &clk_regmap_gate_ops,
- .parent_names = (const char *[]){ "cts_oscin" },
+ .parent_hws = (const struct clk_hw *[]) {
+ &g12a_aoclk_cts_oscin.hw
+ },
.num_parents = 1,
},
};
@@ -226,7 +238,9 @@ static struct clk_regmap g12a_aoclk_cec_div = {
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_cec_div",
.ops = &meson_clk_dualdiv_ops,
- .parent_names = (const char *[]){ "g12a_ao_cec_pre" },
+ .parent_hws = (const struct clk_hw *[]) {
+ &g12a_aoclk_cec_pre.hw
+ },
.num_parents = 1,
},
};
@@ -241,8 +255,10 @@ static struct clk_regmap g12a_aoclk_cec_sel = {
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_cec_sel",
.ops = &clk_regmap_mux_ops,
- .parent_names = (const char *[]){ "g12a_ao_cec_div",
- "g12a_ao_cec_pre" },
+ .parent_hws = (const struct clk_hw *[]) {
+ &g12a_aoclk_cec_div.hw,
+ &g12a_aoclk_cec_pre.hw,
+ },
.num_parents = 2,
.flags = CLK_SET_RATE_PARENT,
},
@@ -256,7 +272,9 @@ static struct clk_regmap g12a_aoclk_cec = {
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_cec",
.ops = &clk_regmap_gate_ops,
- .parent_names = (const char *[]){ "g12a_ao_cec_sel" },
+ .parent_hws = (const struct clk_hw *[]) {
+ &g12a_aoclk_cec_sel.hw
+ },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
@@ -272,8 +290,10 @@ static struct clk_regmap g12a_aoclk_cts_rtc_oscin = {
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_cts_rtc_oscin",
.ops = &clk_regmap_mux_ops,
- .parent_names = (const char *[]){ "g12a_ao_32k_by_oscin",
- IN_PREFIX "ext_32k-0" },
+ .parent_data = (const struct clk_parent_data []) {
+ { .hw = &g12a_aoclk_32k_by_oscin.hw },
+ { .fw_name = "ext-32k-0", },
+ },
.num_parents = 2,
.flags = CLK_SET_RATE_PARENT,
},
@@ -289,8 +309,10 @@ static struct clk_regmap g12a_aoclk_clk81 = {
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_clk81",
.ops = &clk_regmap_mux_ro_ops,
- .parent_names = (const char *[]){ IN_PREFIX "mpeg-clk",
- "g12a_ao_cts_rtc_oscin"},
+ .parent_data = (const struct clk_parent_data []) {
+ { .fw_name = "mpeg-clk", },
+ { .hw = &g12a_aoclk_cts_rtc_oscin.hw },
+ },
.num_parents = 2,
.flags = CLK_SET_RATE_PARENT,
},
@@ -305,8 +327,10 @@ static struct clk_regmap g12a_aoclk_saradc_mux = {
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_saradc_mux",
.ops = &clk_regmap_mux_ops,
- .parent_names = (const char *[]){ IN_PREFIX "xtal",
- "g12a_ao_clk81" },
+ .parent_data = (const struct clk_parent_data []) {
+ { .fw_name = "xtal", },
+ { .hw = &g12a_aoclk_clk81.hw },
+ },
.num_parents = 2,
},
};
@@ -320,7 +344,9 @@ static struct clk_regmap g12a_aoclk_saradc_div = {
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_saradc_div",
.ops = &clk_regmap_divider_ops,
- .parent_names = (const char *[]){ "g12a_ao_saradc_mux" },
+ .parent_hws = (const struct clk_hw *[]) {
+ &g12a_aoclk_saradc_mux.hw
+ },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
@@ -334,7 +360,9 @@ static struct clk_regmap g12a_aoclk_saradc_gate = {
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_saradc_gate",
.ops = &clk_regmap_gate_ops,
- .parent_names = (const char *[]){ "g12a_ao_saradc_div" },
+ .parent_hws = (const struct clk_hw *[]) {
+ &g12a_aoclk_saradc_div.hw
+ },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
@@ -417,12 +445,6 @@ static const struct clk_hw_onecell_data g12a_aoclk_onecell_data = {
.num = NR_CLKS,
};
-static const struct meson_aoclk_input g12a_aoclk_inputs[] = {
- { .name = "xtal", .required = true },
- { .name = "mpeg-clk", .required = true },
- { .name = "ext-32k-0", .required = false },
-};
-
static const struct meson_aoclk_data g12a_aoclkc_data = {
.reset_reg = AO_RTI_GEN_CNTL_REG0,
.num_reset = ARRAY_SIZE(g12a_aoclk_reset),
@@ -430,9 +452,6 @@ static const struct meson_aoclk_data g12a_aoclkc_data = {
.num_clks = ARRAY_SIZE(g12a_aoclk_regmap),
.clks = g12a_aoclk_regmap,
.hw_data = &g12a_aoclk_onecell_data,
- .inputs = g12a_aoclk_inputs,
- .num_inputs = ARRAY_SIZE(g12a_aoclk_inputs),
- .input_prefix = IN_PREFIX,
};
static const struct of_device_id g12a_aoclkc_match_table[] = {
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-07-22 9:52 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-22 9:50 [PATCH 0/4] clk: meson: ao: use the new parent description method Alexandre Mergnat
2019-07-22 9:50 ` Alexandre Mergnat [this message]
2019-07-22 9:50 ` [PATCH 2/4] clk: meson: gxbb-aoclk: migrate to " Alexandre Mergnat
2019-07-25 14:41 ` Jerome Brunet
2019-07-22 9:50 ` [PATCH 3/4] clk: meson: axg-aoclk: " Alexandre Mergnat
2019-07-22 9:50 ` [PATCH 4/4] clk: meson: remove ao input bypass clocks Alexandre Mergnat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190722095053.14104-2-amergnat@baylibre.com \
--to=amergnat@baylibre.com \
--cc=baylibre-upstreaming@groups.io \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=narmstrong@baylibre.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).