linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Guillaume La Roque <glaroque@baylibre.com>
To: daniel.lezcano@linaro.org, khilman@baylibre.com
Cc: devicetree@vger.kernel.org, linux-amlogic@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org
Subject: [PATCH v3 0/6] Add support of New Amlogic temperature sensor for G12 SoCs
Date: Tue,  6 Aug 2019 15:05:00 +0200	[thread overview]
Message-ID: <20190806130506.8753-1-glaroque@baylibre.com> (raw)

This patchs series add support of New Amlogic temperature sensor and minimal
thermal zone for SEI510 and ODROID-N2 boards.

First implementation was doing on IIO[1] but after comments i move on thermal framework.
Formulas and calibration values come from amlogic.

Changes since v2:
  - fix yaml documention 
  - remove unneeded status variable for temperature-sensor node
  - rework driver after Martin review
  - add some information in commit message

Changes since v1:
  - fix enum vs const in documentation
  - fix error with thermal-sensor-cells value set to 1 instead of 0
  - add some dependencies needed to add cooling-maps

Dependencies :
- patch 3,4 & 5: depends on Neil's patch and series :
              - missing dwc2 phy-names[2]
              - patchsets to add DVFS on G12a[3] which have deps on [4] and [5]

[1] https://lore.kernel.org/linux-amlogic/20190604144714.2009-1-glaroque@baylibre.com/
[2] https://lore.kernel.org/linux-amlogic/20190625123647.26117-1-narmstrong@baylibre.com/
[3] https://lore.kernel.org/linux-amlogic/20190729132622.7566-1-narmstrong@baylibre.com/
[4] https://lore.kernel.org/linux-amlogic/20190731084019.8451-5-narmstrong@baylibre.com/
[5] https://lore.kernel.org/linux-amlogic/20190729132622.7566-3-narmstrong@baylibre.com/

Guillaume La Roque (6):
  dt-bindings: thermal: Add DT bindings documentation for Amlogic
    Thermal
  thermal: amlogic: Add thermal driver to support G12 SoCs
  arm64: dts: amlogic: g12: add temperature sensor
  arm64: dts: meson: sei510: Add minimal thermal zone
  arm64: dts: amlogic: odroid-n2: add minimal thermal zone
  MAINTAINERS: add entry for Amlogic Thermal driver

 .../bindings/thermal/amlogic,thermal.yaml     |  54 +++
 MAINTAINERS                                   |   9 +
 .../boot/dts/amlogic/meson-g12-common.dtsi    |  20 ++
 .../boot/dts/amlogic/meson-g12a-sei510.dts    |  56 +++
 .../boot/dts/amlogic/meson-g12b-odroid-n2.dts |  60 ++++
 drivers/thermal/Kconfig                       |  11 +
 drivers/thermal/Makefile                      |   1 +
 drivers/thermal/amlogic_thermal.c             | 336 ++++++++++++++++++
 8 files changed, 547 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
 create mode 100644 drivers/thermal/amlogic_thermal.c

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2019-08-06 13:05 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-06 13:05 Guillaume La Roque [this message]
2019-08-06 13:05 ` [PATCH v3 1/6] dt-bindings: thermal: Add DT bindings documentation for Amlogic Thermal Guillaume La Roque
2019-08-21 19:31   ` Rob Herring
2019-08-06 13:05 ` [PATCH v3 2/6] thermal: amlogic: Add thermal driver to support G12 SoCs Guillaume La Roque
2019-08-11 15:43   ` Martin Blumenstingl
2019-08-06 13:05 ` [PATCH v3 3/6] arm64: dts: amlogic: g12: add temperature sensor Guillaume La Roque
2019-08-06 13:05 ` [PATCH v3 4/6] arm64: dts: meson: sei510: Add minimal thermal zone Guillaume La Roque
2019-08-06 19:24   ` Martin Blumenstingl
2019-08-06 13:05 ` [PATCH v3 5/6] arm64: dts: amlogic: odroid-n2: add " Guillaume La Roque
2019-08-06 19:25   ` Martin Blumenstingl
2019-08-06 13:05 ` [PATCH v3 6/6] MAINTAINERS: add entry for Amlogic Thermal driver Guillaume La Roque
2019-08-10  0:11 ` [PATCH v3 0/6] Add support of New Amlogic temperature sensor for G12 SoCs Kevin Hilman
2019-08-21 21:30   ` Kevin Hilman
2019-08-14 12:24 ` Christian Hewitt
2019-08-21 21:19   ` guillaume La Roque

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190806130506.8753-1-glaroque@baylibre.com \
    --to=glaroque@baylibre.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).