From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-8.3 required=3.0 tests=DKIMWL_WL_HIGH,DKIM_SIGNED, DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED,USER_AGENT_SANE_1 autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id ED469C433FF for ; Thu, 8 Aug 2019 09:16:27 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id A76112089E for ; Thu, 8 Aug 2019 09:16:27 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="khs7Bfm8" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org A76112089E Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=linux.intel.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+infradead-linux-arm-kernel=archiver.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:In-Reply-To:MIME-Version:References: Message-ID:Subject:To:From:Date:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=xGhAH0JU19SoisDeRmBjxt1tzD8E9sz9SAnnZhgdLgA=; b=khs7Bfm8R0DJ0S qIKedp3meogtptC8xewyGAMCQsJhYXYrz7gIaZ1mKrshsfM31T4WMS6HmV97dx7WVOnNVgc8eEYUL eAS95Ygho3dTUnWYi+pmr1tMPLBpjYgohJlYI/tZlR8W+t8fYjJ4TURI9CDLUgsNP9DGZp/jqsoF8 EpManZJBNdIXhAgS3wNUj1P6WAf2y7tOxAlAZqW7zBM5NJVFgyE3IgU7W03zY5H7W7QJUHrIrG9pZ vPucu1ibYfWz6pFlUI8t25V2pW0gw1HpBmZkjcqaatx6B4CoRTSQZ7S4nNM0VZNFt41iy9KbSlll6 j42ZqiyOBjkMfGn3fKdw==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.92 #3 (Red Hat Linux)) id 1hveX4-0005qu-Cq; Thu, 08 Aug 2019 09:16:26 +0000 Received: from mga05.intel.com ([192.55.52.43]) by bombadil.infradead.org with esmtps (Exim 4.92 #3 (Red Hat Linux)) id 1hveWI-0004Lb-9P; Thu, 08 Aug 2019 09:15:42 +0000 X-Amp-Result: UNKNOWN X-Amp-Original-Verdict: FILE UNKNOWN X-Amp-File-Uploaded: False Received: from orsmga002.jf.intel.com ([10.7.209.21]) by fmsmga105.fm.intel.com with ESMTP/TLS/DHE-RSA-AES256-GCM-SHA384; 08 Aug 2019 02:13:36 -0700 X-IronPort-AV: E=Sophos;i="5.64,360,1559545200"; d="scan'208";a="186290397" Received: from paasikivi.fi.intel.com ([10.237.72.42]) by orsmga002-auth.jf.intel.com with ESMTP/TLS/DHE-RSA-AES256-GCM-SHA384; 08 Aug 2019 02:13:31 -0700 Received: by paasikivi.fi.intel.com (Postfix, from userid 1000) id 8F236203D9; Thu, 8 Aug 2019 12:14:07 +0300 (EEST) Date: Thu, 8 Aug 2019 12:14:07 +0300 From: Sakari Ailus To: Helen Koike Subject: Re: [PATCH v8 05/14] media: rkisp1: add Rockchip ISP1 subdev driver Message-ID: <20190808091406.GQ21370@paasikivi.fi.intel.com> References: <20190730184256.30338-1-helen.koike@collabora.com> <20190730184256.30338-6-helen.koike@collabora.com> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <20190730184256.30338-6-helen.koike@collabora.com> User-Agent: Mutt/1.10.1 (2018-07-13) X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20190808_021538_472396_6F6CA3AB X-CRM114-Status: GOOD ( 27.78 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, eddie.cai.linux@gmail.com, kernel@collabora.com, heiko@sntech.de, jacob2.chen@rock-chips.com, jeffy.chen@rock-chips.com, zyc@rock-chips.com, linux-kernel@vger.kernel.org, tfiga@chromium.org, linux-rockchip@lists.infradead.org, Allon Huang , Jacob Chen , hans.verkuil@cisco.com, laurent.pinchart@ideasonboard.com, zhengsq@rock-chips.com, mchehab@kernel.org, ezequiel@collabora.com, linux-arm-kernel@lists.infradead.org, linux-media@vger.kernel.org Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+infradead-linux-arm-kernel=archiver.kernel.org@lists.infradead.org Hi Helen, On Tue, Jul 30, 2019 at 03:42:47PM -0300, Helen Koike wrote: > From: Jacob Chen > > Add the subdev driver for rockchip isp1. > > Signed-off-by: Jacob Chen > Signed-off-by: Shunqian Zheng > Signed-off-by: Yichong Zhong > Signed-off-by: Jacob Chen > Signed-off-by: Eddie Cai > Signed-off-by: Jeffy Chen > Signed-off-by: Allon Huang > Signed-off-by: Tomasz Figa > [fixed unknown entity type / switched to PIXEL_RATE] > Signed-off-by: Ezequiel Garcia > [update for upstream] > Signed-off-by: Helen Koike > > --- > > Changes in v8: None > Changes in v7: > - fixed warning because of unknown entity type > - fixed v4l2-compliance errors regarding rkisp1 formats, try formats > and default values > - fix typo riksp1/rkisp1 > - redesign: remove mipi/csi subdevice, sensors connect directly to the > isp subdevice in the media topology now. As a consequence, remove the > hack in mipidphy_g_mbus_config() where information from the sensor was > being propagated through the topology. > - From the old dphy: > * cache get_remote_sensor() in s_stream > * use V4L2_CID_PIXEL_RATE instead of V4L2_CID_LINK_FREQ > - Replace stream state with a boolean > - code styling and checkpatch fixes > - fix stop_stream (return after calling stop, do not reenable the stream) > - fix rkisp1_isp_sd_get_selection when V4L2_SUBDEV_FORMAT_TRY is set > - fix get format in output (isp_sd->out_fmt.mbus_code was being ignored) > - s/intput/input > - remove #define sd_to_isp_sd(_sd), add a static inline as it will be > reused by the capture > > drivers/media/platform/rockchip/isp1/rkisp1.c | 1286 +++++++++++++++++ > drivers/media/platform/rockchip/isp1/rkisp1.h | 111 ++ > 2 files changed, 1397 insertions(+) > create mode 100644 drivers/media/platform/rockchip/isp1/rkisp1.c > create mode 100644 drivers/media/platform/rockchip/isp1/rkisp1.h > > diff --git a/drivers/media/platform/rockchip/isp1/rkisp1.c b/drivers/media/platform/rockchip/isp1/rkisp1.c > new file mode 100644 > index 000000000000..6d0c0ffb5e03 > --- /dev/null > +++ b/drivers/media/platform/rockchip/isp1/rkisp1.c > @@ -0,0 +1,1286 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Rockchip isp1 driver > + * > + * Copyright (C) 2017 Rockchip Electronics Co., Ltd. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include "common.h" > +#include "regs.h" > + > +#define CIF_ISP_INPUT_W_MAX 4032 > +#define CIF_ISP_INPUT_H_MAX 3024 > +#define CIF_ISP_INPUT_W_MIN 32 > +#define CIF_ISP_INPUT_H_MIN 32 > +#define CIF_ISP_OUTPUT_W_MAX CIF_ISP_INPUT_W_MAX > +#define CIF_ISP_OUTPUT_H_MAX CIF_ISP_INPUT_H_MAX > +#define CIF_ISP_OUTPUT_W_MIN CIF_ISP_INPUT_W_MIN > +#define CIF_ISP_OUTPUT_H_MIN CIF_ISP_INPUT_H_MIN > + > +/* > + * NOTE: MIPI controller and input MUX are also configured in this file, > + * because ISP Subdev is not only describe ISP submodule(input size,format, > + * output size, format), but also a virtual route device. > + */ > + > +/* > + * There are many variables named with format/frame in below code, > + * please see here for their meaning. > + * > + * Cropping regions of ISP > + * > + * +---------------------------------------------------------+ > + * | Sensor image | > + * | +---------------------------------------------------+ | > + * | | ISP_ACQ (for black level) | | > + * | | in_frm | | > + * | | +--------------------------------------------+ | | > + * | | | ISP_OUT | | | > + * | | | in_crop | | | > + * | | | +---------------------------------+ | | | > + * | | | | ISP_IS | | | | > + * | | | | rkisp1_isp_subdev: out_crop | | | | > + * | | | +---------------------------------+ | | | > + * | | +--------------------------------------------+ | | > + * | +---------------------------------------------------+ | > + * +---------------------------------------------------------+ > + */ > + > +static inline struct rkisp1_device *sd_to_isp_dev(struct v4l2_subdev *sd) > +{ > + return container_of(sd->v4l2_dev, struct rkisp1_device, v4l2_dev); > +} > + > +/* Get sensor by enabled media link */ > +static struct v4l2_subdev *get_remote_sensor(struct v4l2_subdev *sd) > +{ > + struct media_pad *local, *remote; > + struct media_entity *sensor_me; > + > + local = &sd->entity.pads[RKISP1_ISP_PAD_SINK]; > + remote = media_entity_remote_pad(local); > + if (!remote) { > + v4l2_warn(sd, "No link between isp and sensor\n"); > + return NULL; > + } > + > + sensor_me = media_entity_remote_pad(local)->entity; > + return media_entity_to_v4l2_subdev(sensor_me); > +} > + > +static struct rkisp1_sensor *sd_to_sensor(struct rkisp1_device *dev, > + struct v4l2_subdev *sd) Indentation. > +{ > + struct rkisp1_sensor *sensor; > + > + list_for_each_entry(sensor, &dev->sensors, list) > + if (sensor->sd == sd) > + return sensor; > + > + return NULL; > +} > + > +/**************** register operations ****************/ > + > +/* > + * Image Stabilization. > + * This should only be called when configuring CIF > + * or at the frame end interrupt > + */ > +static void rkisp1_config_ism(struct rkisp1_device *dev) > +{ > + void __iomem *base = dev->base_addr; > + struct v4l2_rect *out_crop = &dev->isp_sdev.out_crop; > + u32 val; > + > + writel(0, base + CIF_ISP_IS_RECENTER); > + writel(0, base + CIF_ISP_IS_MAX_DX); > + writel(0, base + CIF_ISP_IS_MAX_DY); > + writel(0, base + CIF_ISP_IS_DISPLACE); > + writel(out_crop->left, base + CIF_ISP_IS_H_OFFS); > + writel(out_crop->top, base + CIF_ISP_IS_V_OFFS); > + writel(out_crop->width, base + CIF_ISP_IS_H_SIZE); > + writel(out_crop->height, base + CIF_ISP_IS_V_SIZE); > + > + /* IS(Image Stabilization) is always on, working as output crop */ > + writel(1, base + CIF_ISP_IS_CTRL); > + val = readl(base + CIF_ISP_CTRL); > + val |= CIF_ISP_CTRL_ISP_CFG_UPD; > + writel(val, base + CIF_ISP_CTRL); > +} > + > +/* > + * configure isp blocks with input format, size...... > + */ > +static int rkisp1_config_isp(struct rkisp1_device *dev) > +{ > + u32 isp_ctrl = 0, irq_mask = 0, acq_mult = 0, signal = 0; > + struct v4l2_rect *out_crop, *in_crop; > + void __iomem *base = dev->base_addr; > + struct v4l2_mbus_framefmt *in_frm; > + struct ispsd_out_fmt *out_fmt; > + struct rkisp1_sensor *sensor; > + struct ispsd_in_fmt *in_fmt; > + > + sensor = dev->active_sensor; > + in_frm = &dev->isp_sdev.in_frm; > + in_fmt = &dev->isp_sdev.in_fmt; > + out_fmt = &dev->isp_sdev.out_fmt; > + out_crop = &dev->isp_sdev.out_crop; > + in_crop = &dev->isp_sdev.in_crop; > + > + if (in_fmt->fmt_type == FMT_BAYER) { > + acq_mult = 1; > + if (out_fmt->fmt_type == FMT_BAYER) { > + if (sensor->mbus.type == V4L2_MBUS_BT656) > + isp_ctrl = > + CIF_ISP_CTRL_ISP_MODE_RAW_PICT_ITU656; > + else > + isp_ctrl = > + CIF_ISP_CTRL_ISP_MODE_RAW_PICT; > + } else { > + writel(CIF_ISP_DEMOSAIC_TH(0xc), > + base + CIF_ISP_DEMOSAIC); > + > + if (sensor->mbus.type == V4L2_MBUS_BT656) > + isp_ctrl = CIF_ISP_CTRL_ISP_MODE_BAYER_ITU656; > + else > + isp_ctrl = CIF_ISP_CTRL_ISP_MODE_BAYER_ITU601; > + } > + } else if (in_fmt->fmt_type == FMT_YUV) { > + acq_mult = 2; > + if (sensor->mbus.type == V4L2_MBUS_CSI2_DPHY) { > + isp_ctrl = CIF_ISP_CTRL_ISP_MODE_ITU601; > + } else { > + if (sensor->mbus.type == V4L2_MBUS_BT656) > + isp_ctrl = CIF_ISP_CTRL_ISP_MODE_ITU656; > + else > + isp_ctrl = CIF_ISP_CTRL_ISP_MODE_ITU601; > + > + } > + > + irq_mask |= CIF_ISP_DATA_LOSS; > + } > + > + /* Set up input acquisition properties */ > + if (sensor->mbus.type == V4L2_MBUS_BT656 || > + sensor->mbus.type == V4L2_MBUS_PARALLEL) { > + if (sensor->mbus.flags & V4L2_MBUS_PCLK_SAMPLE_RISING) > + signal = CIF_ISP_ACQ_PROP_POS_EDGE; > + } > + > + if (sensor->mbus.type == V4L2_MBUS_PARALLEL) { > + if (sensor->mbus.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW) > + signal |= CIF_ISP_ACQ_PROP_VSYNC_LOW; > + > + if (sensor->mbus.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW) > + signal |= CIF_ISP_ACQ_PROP_HSYNC_LOW; > + } > + > + writel(isp_ctrl, base + CIF_ISP_CTRL); > + writel(signal | in_fmt->yuv_seq | > + CIF_ISP_ACQ_PROP_BAYER_PAT(in_fmt->bayer_pat) | > + CIF_ISP_ACQ_PROP_FIELD_SEL_ALL, base + CIF_ISP_ACQ_PROP); > + writel(0, base + CIF_ISP_ACQ_NR_FRAMES); > + > + /* Acquisition Size */ > + writel(0, base + CIF_ISP_ACQ_H_OFFS); > + writel(0, base + CIF_ISP_ACQ_V_OFFS); > + writel(acq_mult * in_frm->width, base + CIF_ISP_ACQ_H_SIZE); > + writel(in_frm->height, base + CIF_ISP_ACQ_V_SIZE); > + > + /* ISP Out Area */ > + writel(in_crop->left, base + CIF_ISP_OUT_H_OFFS); > + writel(in_crop->top, base + CIF_ISP_OUT_V_OFFS); > + writel(in_crop->width, base + CIF_ISP_OUT_H_SIZE); > + writel(in_crop->height, base + CIF_ISP_OUT_V_SIZE); > + > + /* interrupt mask */ > + irq_mask |= CIF_ISP_FRAME | CIF_ISP_V_START | CIF_ISP_PIC_SIZE_ERROR | > + CIF_ISP_FRAME_IN; > + writel(irq_mask, base + CIF_ISP_IMSC); > + > + if (out_fmt->fmt_type == FMT_BAYER) > + rkisp1_params_disable_isp(&dev->params_vdev); > + else > + rkisp1_params_configure_isp(&dev->params_vdev, in_fmt, > + dev->isp_sdev.quantization); > + > + return 0; > +} > + > +static int rkisp1_config_dvp(struct rkisp1_device *dev) > +{ > + struct ispsd_in_fmt *in_fmt = &dev->isp_sdev.in_fmt; > + void __iomem *base = dev->base_addr; > + u32 val, input_sel; > + > + switch (in_fmt->bus_width) { > + case 8: > + input_sel = CIF_ISP_ACQ_PROP_IN_SEL_8B_ZERO; > + break; > + case 10: > + input_sel = CIF_ISP_ACQ_PROP_IN_SEL_10B_ZERO; > + break; > + case 12: > + input_sel = CIF_ISP_ACQ_PROP_IN_SEL_12B; > + break; > + default: > + v4l2_err(&dev->v4l2_dev, "Invalid bus width\n"); > + return -EINVAL; > + } > + > + val = readl(base + CIF_ISP_ACQ_PROP); > + writel(val | input_sel, base + CIF_ISP_ACQ_PROP); > + > + return 0; > +} > + > +static int rkisp1_config_mipi(struct rkisp1_device *dev) > +{ > + struct ispsd_in_fmt *in_fmt = &dev->isp_sdev.in_fmt; > + struct rkisp1_sensor *sensor = dev->active_sensor; > + void __iomem *base = dev->base_addr; > + unsigned int lanes; > + u32 mipi_ctrl; > + > + /* > + * sensor->mbus is set in isp or d-phy notifier_bound function > + */ > + switch (sensor->mbus.flags & V4L2_MBUS_CSI2_LANES) { > + case V4L2_MBUS_CSI2_4_LANE: > + lanes = 4; > + break; > + case V4L2_MBUS_CSI2_3_LANE: > + lanes = 3; > + break; > + case V4L2_MBUS_CSI2_2_LANE: > + lanes = 2; > + break; > + case V4L2_MBUS_CSI2_1_LANE: > + lanes = 1; > + break; > + default: > + return -EINVAL; > + } > + > + mipi_ctrl = CIF_MIPI_CTRL_NUM_LANES(lanes - 1) | > + CIF_MIPI_CTRL_SHUTDOWNLANES(0xf) | > + CIF_MIPI_CTRL_ERR_SOT_SYNC_HS_SKIP | > + CIF_MIPI_CTRL_CLOCKLANE_ENA; > + > + writel(mipi_ctrl, base + CIF_MIPI_CTRL); > + > + /* Configure Data Type and Virtual Channel */ > + writel(CIF_MIPI_DATA_SEL_DT(in_fmt->mipi_dt) | CIF_MIPI_DATA_SEL_VC(0), > + base + CIF_MIPI_IMG_DATA_SEL); > + > + /* Clear MIPI interrupts */ > + writel(~0, base + CIF_MIPI_ICR); > + /* > + * Disable CIF_MIPI_ERR_DPHY interrupt here temporary for > + * isp bus may be dead when switch isp. > + */ > + writel(CIF_MIPI_FRAME_END | CIF_MIPI_ERR_CSI | CIF_MIPI_ERR_DPHY | > + CIF_MIPI_SYNC_FIFO_OVFLW(0x03) | CIF_MIPI_ADD_DATA_OVFLW, > + base + CIF_MIPI_IMSC); > + > + v4l2_dbg(1, rkisp1_debug, &dev->v4l2_dev, "\n MIPI_CTRL 0x%08x\n" > + " MIPI_IMG_DATA_SEL 0x%08x\n" > + " MIPI_STATUS 0x%08x\n" > + " MIPI_IMSC 0x%08x\n", > + readl(base + CIF_MIPI_CTRL), > + readl(base + CIF_MIPI_IMG_DATA_SEL), > + readl(base + CIF_MIPI_STATUS), > + readl(base + CIF_MIPI_IMSC)); > + > + return 0; > +} > + > +/* Configure MUX */ > +static int rkisp1_config_path(struct rkisp1_device *dev) > +{ > + struct rkisp1_sensor *sensor = dev->active_sensor; > + u32 dpcl = readl(dev->base_addr + CIF_VI_DPCL); > + int ret = 0; > + > + if (sensor->mbus.type == V4L2_MBUS_BT656 || > + sensor->mbus.type == V4L2_MBUS_PARALLEL) { > + ret = rkisp1_config_dvp(dev); > + dpcl |= CIF_VI_DPCL_IF_SEL_PARALLEL; > + } else if (sensor->mbus.type == V4L2_MBUS_CSI2_DPHY) { > + ret = rkisp1_config_mipi(dev); > + dpcl |= CIF_VI_DPCL_IF_SEL_MIPI; > + } > + > + writel(dpcl, dev->base_addr + CIF_VI_DPCL); > + > + return ret; > +} > + > +/* Hareware configure Entry */ > +static int rkisp1_config_cif(struct rkisp1_device *dev) > +{ > + u32 cif_id; > + int ret; > + > + v4l2_dbg(1, rkisp1_debug, &dev->v4l2_dev, > + "SP streaming = %d, MP streaming = %d\n", > + dev->stream[RKISP1_STREAM_SP].streaming, > + dev->stream[RKISP1_STREAM_MP].streaming); > + > + cif_id = readl(dev->base_addr + CIF_VI_ID); > + v4l2_dbg(1, rkisp1_debug, &dev->v4l2_dev, "CIF_ID 0x%08x\n", cif_id); > + > + ret = rkisp1_config_isp(dev); > + if (ret < 0) > + return ret; > + ret = rkisp1_config_path(dev); > + if (ret < 0) > + return ret; > + rkisp1_config_ism(dev); > + > + return 0; > +} > + > +/* Mess register operations to stop isp */ > +static int rkisp1_isp_stop(struct rkisp1_device *dev) > +{ > + void __iomem *base = dev->base_addr; > + u32 val; > + > + v4l2_dbg(1, rkisp1_debug, &dev->v4l2_dev, > + "SP streaming = %d, MP streaming = %d\n", > + dev->stream[RKISP1_STREAM_SP].streaming, > + dev->stream[RKISP1_STREAM_MP].streaming); > + > + /* > + * ISP(mi) stop in mi frame end -> Stop ISP(mipi) -> > + * Stop ISP(isp) ->wait for ISP isp off > + */ > + /* stop and clear MI, MIPI, and ISP interrupts */ > + writel(0, base + CIF_MIPI_IMSC); > + writel(~0, base + CIF_MIPI_ICR); > + > + writel(0, base + CIF_ISP_IMSC); > + writel(~0, base + CIF_ISP_ICR); > + > + writel(0, base + CIF_MI_IMSC); > + writel(~0, base + CIF_MI_ICR); > + val = readl(base + CIF_MIPI_CTRL); > + writel(val & (~CIF_MIPI_CTRL_OUTPUT_ENA), base + CIF_MIPI_CTRL); > + /* stop ISP */ > + val = readl(base + CIF_ISP_CTRL); > + val &= ~(CIF_ISP_CTRL_ISP_INFORM_ENABLE | CIF_ISP_CTRL_ISP_ENABLE); > + writel(val, base + CIF_ISP_CTRL); > + > + val = readl(base + CIF_ISP_CTRL); > + writel(val | CIF_ISP_CTRL_ISP_CFG_UPD, base + CIF_ISP_CTRL); > + > + readx_poll_timeout(readl, base + CIF_ISP_RIS, > + val, val & CIF_ISP_OFF, 20, 100); > + v4l2_dbg(1, rkisp1_debug, &dev->v4l2_dev, > + "streaming(MP:%d, SP:%d), MI_CTRL:%x, ISP_CTRL:%x, MIPI_CTRL:%x\n", > + dev->stream[RKISP1_STREAM_SP].streaming, > + dev->stream[RKISP1_STREAM_MP].streaming, > + readl(base + CIF_MI_CTRL), > + readl(base + CIF_ISP_CTRL), > + readl(base + CIF_MIPI_CTRL)); > + > + writel(CIF_IRCL_MIPI_SW_RST | CIF_IRCL_ISP_SW_RST, base + CIF_IRCL); > + writel(0x0, base + CIF_IRCL); > + > + return 0; > +} > + > +/* Mess register operations to start isp */ > +static int rkisp1_isp_start(struct rkisp1_device *dev) > +{ > + struct rkisp1_sensor *sensor = dev->active_sensor; > + void __iomem *base = dev->base_addr; > + u32 val; > + > + v4l2_dbg(1, rkisp1_debug, &dev->v4l2_dev, > + "SP streaming = %d, MP streaming = %d\n", > + dev->stream[RKISP1_STREAM_SP].streaming, > + dev->stream[RKISP1_STREAM_MP].streaming); > + > + /* Activate MIPI */ > + if (sensor->mbus.type == V4L2_MBUS_CSI2_DPHY) { > + val = readl(base + CIF_MIPI_CTRL); > + writel(val | CIF_MIPI_CTRL_OUTPUT_ENA, base + CIF_MIPI_CTRL); > + } > + /* Activate ISP */ > + val = readl(base + CIF_ISP_CTRL); > + val |= CIF_ISP_CTRL_ISP_CFG_UPD | CIF_ISP_CTRL_ISP_ENABLE | > + CIF_ISP_CTRL_ISP_INFORM_ENABLE; > + writel(val, base + CIF_ISP_CTRL); > + > + /* XXX: Is the 1000us too long? > + * CIF spec says to wait for sufficient time after enabling > + * the MIPI interface and before starting the sensor output. > + */ > + usleep_range(1000, 1200); > + > + v4l2_dbg(1, rkisp1_debug, &dev->v4l2_dev, > + "SP streaming = %d, MP streaming = %d MI_CTRL 0x%08x\n" > + " ISP_CTRL 0x%08x MIPI_CTRL 0x%08x\n", > + dev->stream[RKISP1_STREAM_SP].streaming, > + dev->stream[RKISP1_STREAM_MP].streaming, > + readl(base + CIF_MI_CTRL), > + readl(base + CIF_ISP_CTRL), > + readl(base + CIF_MIPI_CTRL)); > + > + return 0; > +} > + > +static void rkisp1_config_clk(struct rkisp1_device *dev) > +{ > + u32 val = CIF_ICCL_ISP_CLK | CIF_ICCL_CP_CLK | CIF_ICCL_MRSZ_CLK | > + CIF_ICCL_SRSZ_CLK | CIF_ICCL_JPEG_CLK | CIF_ICCL_MI_CLK | > + CIF_ICCL_IE_CLK | CIF_ICCL_MIPI_CLK | CIF_ICCL_DCROP_CLK; > + > + writel(val, dev->base_addr + CIF_ICCL); > +} > + > +/***************************** isp sub-devs *******************************/ > + > +static const struct ispsd_in_fmt rkisp1_isp_input_formats[] = { > + { > + .mbus_code = MEDIA_BUS_FMT_SBGGR10_1X10, > + .fmt_type = FMT_BAYER, > + .mipi_dt = CIF_CSI2_DT_RAW10, > + .bayer_pat = RAW_BGGR, > + .bus_width = 10, > + }, { > + .mbus_code = MEDIA_BUS_FMT_SRGGB10_1X10, > + .fmt_type = FMT_BAYER, > + .mipi_dt = CIF_CSI2_DT_RAW10, > + .bayer_pat = RAW_RGGB, > + .bus_width = 10, > + }, { > + .mbus_code = MEDIA_BUS_FMT_SGBRG10_1X10, > + .fmt_type = FMT_BAYER, > + .mipi_dt = CIF_CSI2_DT_RAW10, > + .bayer_pat = RAW_GBRG, > + .bus_width = 10, > + }, { > + .mbus_code = MEDIA_BUS_FMT_SGRBG10_1X10, > + .fmt_type = FMT_BAYER, > + .mipi_dt = CIF_CSI2_DT_RAW10, > + .bayer_pat = RAW_GRBG, > + .bus_width = 10, > + }, { > + .mbus_code = MEDIA_BUS_FMT_SRGGB12_1X12, > + .fmt_type = FMT_BAYER, > + .mipi_dt = CIF_CSI2_DT_RAW12, > + .bayer_pat = RAW_RGGB, > + .bus_width = 12, > + }, { > + .mbus_code = MEDIA_BUS_FMT_SBGGR12_1X12, > + .fmt_type = FMT_BAYER, > + .mipi_dt = CIF_CSI2_DT_RAW12, > + .bayer_pat = RAW_BGGR, > + .bus_width = 12, > + }, { > + .mbus_code = MEDIA_BUS_FMT_SGBRG12_1X12, > + .fmt_type = FMT_BAYER, > + .mipi_dt = CIF_CSI2_DT_RAW12, > + .bayer_pat = RAW_GBRG, > + .bus_width = 12, > + }, { > + .mbus_code = MEDIA_BUS_FMT_SGRBG12_1X12, > + .fmt_type = FMT_BAYER, > + .mipi_dt = CIF_CSI2_DT_RAW12, > + .bayer_pat = RAW_GRBG, > + .bus_width = 12, > + }, { > + .mbus_code = MEDIA_BUS_FMT_SRGGB8_1X8, > + .fmt_type = FMT_BAYER, > + .mipi_dt = CIF_CSI2_DT_RAW8, > + .bayer_pat = RAW_RGGB, > + .bus_width = 8, > + }, { > + .mbus_code = MEDIA_BUS_FMT_SBGGR8_1X8, > + .fmt_type = FMT_BAYER, > + .mipi_dt = CIF_CSI2_DT_RAW8, > + .bayer_pat = RAW_BGGR, > + .bus_width = 8, > + }, { > + .mbus_code = MEDIA_BUS_FMT_SGBRG8_1X8, > + .fmt_type = FMT_BAYER, > + .mipi_dt = CIF_CSI2_DT_RAW8, > + .bayer_pat = RAW_GBRG, > + .bus_width = 8, > + }, { > + .mbus_code = MEDIA_BUS_FMT_SGRBG8_1X8, > + .fmt_type = FMT_BAYER, > + .mipi_dt = CIF_CSI2_DT_RAW8, > + .bayer_pat = RAW_GRBG, > + .bus_width = 8, > + }, { > + .mbus_code = MEDIA_BUS_FMT_YUYV8_1X16, > + .fmt_type = FMT_YUV, > + .mipi_dt = CIF_CSI2_DT_YUV422_8b, > + .yuv_seq = CIF_ISP_ACQ_PROP_YCBYCR, > + .bus_width = 16, > + }, { > + .mbus_code = MEDIA_BUS_FMT_YVYU8_1X16, > + .fmt_type = FMT_YUV, > + .mipi_dt = CIF_CSI2_DT_YUV422_8b, > + .yuv_seq = CIF_ISP_ACQ_PROP_YCRYCB, > + .bus_width = 16, > + }, { > + .mbus_code = MEDIA_BUS_FMT_UYVY8_1X16, > + .fmt_type = FMT_YUV, > + .mipi_dt = CIF_CSI2_DT_YUV422_8b, > + .yuv_seq = CIF_ISP_ACQ_PROP_CBYCRY, > + .bus_width = 16, > + }, { > + .mbus_code = MEDIA_BUS_FMT_VYUY8_1X16, > + .fmt_type = FMT_YUV, > + .mipi_dt = CIF_CSI2_DT_YUV422_8b, > + .yuv_seq = CIF_ISP_ACQ_PROP_CRYCBY, > + .bus_width = 16, > + }, > +}; > + > +static const struct ispsd_out_fmt rkisp1_isp_output_formats[] = { > + { > + .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8, > + .fmt_type = FMT_YUV, > + }, { > + .mbus_code = MEDIA_BUS_FMT_SRGGB12_1X12, > + .fmt_type = FMT_BAYER, > + }, { > + .mbus_code = MEDIA_BUS_FMT_SBGGR12_1X12, > + .fmt_type = FMT_BAYER, > + }, { > + .mbus_code = MEDIA_BUS_FMT_SGBRG12_1X12, > + .fmt_type = FMT_BAYER, > + }, { > + .mbus_code = MEDIA_BUS_FMT_SGRBG12_1X12, > + .fmt_type = FMT_BAYER, > + }, { > + .mbus_code = MEDIA_BUS_FMT_SRGGB10_1X10, > + .fmt_type = FMT_BAYER, > + }, { > + .mbus_code = MEDIA_BUS_FMT_SBGGR10_1X10, > + .fmt_type = FMT_BAYER, > + }, { > + .mbus_code = MEDIA_BUS_FMT_SGBRG10_1X10, > + .fmt_type = FMT_BAYER, > + }, { > + .mbus_code = MEDIA_BUS_FMT_SGRBG10_1X10, > + .fmt_type = FMT_BAYER, > + }, { > + .mbus_code = MEDIA_BUS_FMT_SRGGB8_1X8, > + .fmt_type = FMT_BAYER, > + }, { > + .mbus_code = MEDIA_BUS_FMT_SBGGR8_1X8, > + .fmt_type = FMT_BAYER, > + }, { > + .mbus_code = MEDIA_BUS_FMT_SGBRG8_1X8, > + .fmt_type = FMT_BAYER, > + }, { > + .mbus_code = MEDIA_BUS_FMT_SGRBG8_1X8, > + .fmt_type = FMT_BAYER, > + }, > +}; > + > +static const struct ispsd_in_fmt *find_in_fmt(u32 mbus_code) > +{ > + unsigned int i, array_size = ARRAY_SIZE(rkisp1_isp_input_formats); I think it'd be nicer to just use ARRAY_SIZE(...) in the condition. Same below. > + const struct ispsd_in_fmt *fmt; > + > + for (i = 0; i < array_size; i++) { > + fmt = &rkisp1_isp_input_formats[i]; > + if (fmt->mbus_code == mbus_code) > + return fmt; > + } > + > + return NULL; > +} > + > +static const struct ispsd_out_fmt *find_out_fmt(u32 mbus_code) > +{ > + unsigned int i, array_size = ARRAY_SIZE(rkisp1_isp_output_formats); > + const struct ispsd_out_fmt *fmt; > + > + for (i = 0; i < array_size; i++) { > + fmt = &rkisp1_isp_output_formats[i]; > + if (fmt->mbus_code == mbus_code) > + return fmt; > + } > + > + return NULL; > +} > + > +static int rkisp1_isp_sd_enum_mbus_code(struct v4l2_subdev *sd, > + struct v4l2_subdev_pad_config *cfg, > + struct v4l2_subdev_mbus_code_enum *code) > +{ > + unsigned int i = code->index; > + > + if ((code->pad != RKISP1_ISP_PAD_SINK) && > + (code->pad != RKISP1_ISP_PAD_SOURCE_PATH)) { > + if (i > 0) > + return -EINVAL; > + code->code = MEDIA_BUS_FMT_FIXED; > + return 0; > + } > + > + if (code->pad == RKISP1_ISP_PAD_SINK) { > + if (i >= ARRAY_SIZE(rkisp1_isp_input_formats)) > + return -EINVAL; > + code->code = rkisp1_isp_input_formats[i].mbus_code; > + } else { > + if (i >= ARRAY_SIZE(rkisp1_isp_output_formats)) > + return -EINVAL; > + code->code = rkisp1_isp_output_formats[i].mbus_code; > + } > + > + return 0; > +} > + > +static int rkisp1_isp_sd_init_config(struct v4l2_subdev *sd, > + struct v4l2_subdev_pad_config *cfg) > +{ > + struct v4l2_rect *mf_in_crop, *mf_out_crop; > + struct v4l2_mbus_framefmt *mf_in, *mf_out; > + > + mf_in = v4l2_subdev_get_try_format(sd, cfg, RKISP1_ISP_PAD_SINK); > + mf_in->width = RKISP1_DEFAULT_WIDTH; > + mf_in->height = RKISP1_DEFAULT_HEIGHT; > + mf_in->field = V4L2_FIELD_NONE; > + mf_in->code = rkisp1_isp_input_formats[0].mbus_code; > + > + mf_in_crop = v4l2_subdev_get_try_crop(sd, cfg, RKISP1_ISP_PAD_SINK); > + mf_in_crop->width = RKISP1_DEFAULT_WIDTH; > + mf_in_crop->height = RKISP1_DEFAULT_HEIGHT; > + mf_in_crop->left = 0; > + mf_in_crop->top = 0; > + > + mf_out = v4l2_subdev_get_try_format(sd, cfg, > + RKISP1_ISP_PAD_SOURCE_PATH); > + *mf_out = *mf_in; > + mf_out->code = rkisp1_isp_output_formats[0].mbus_code; > + mf_out->quantization = V4L2_QUANTIZATION_FULL_RANGE; > + > + mf_out_crop = v4l2_subdev_get_try_crop(sd, cfg, > + RKISP1_ISP_PAD_SOURCE_PATH); > + *mf_out_crop = *mf_in_crop; > + > + return 0; > +} > + > +static int rkisp1_isp_sd_get_fmt(struct v4l2_subdev *sd, > + struct v4l2_subdev_pad_config *cfg, > + struct v4l2_subdev_format *fmt) > +{ > + struct rkisp1_isp_subdev *isp_sd = sd_to_isp_sd(sd); > + struct v4l2_mbus_framefmt *mf = &fmt->format; > + > + if ((fmt->pad != RKISP1_ISP_PAD_SINK) && > + (fmt->pad != RKISP1_ISP_PAD_SOURCE_PATH)) { > + fmt->format.code = MEDIA_BUS_FMT_FIXED; > + /* > + * NOTE: setting a format here doesn't make much sense > + * but v4l2-compliance complains > + */ > + fmt->format.width = RKISP1_DEFAULT_WIDTH; > + fmt->format.height = RKISP1_DEFAULT_HEIGHT; > + fmt->format.field = V4L2_FIELD_NONE; > + return 0; > + } > + > + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > + mf = v4l2_subdev_get_try_format(sd, cfg, fmt->pad); > + fmt->format = *mf; > + return 0; > + } > + > + if (fmt->pad == RKISP1_ISP_PAD_SINK) { > + *mf = isp_sd->in_frm; > + } else if (fmt->pad == RKISP1_ISP_PAD_SOURCE_PATH) { > + /* format of source pad */ > + *mf = isp_sd->in_frm; > + mf->code = isp_sd->out_fmt.mbus_code; > + /* window size of source pad */ > + mf->width = isp_sd->out_crop.width; > + mf->height = isp_sd->out_crop.height; > + mf->quantization = isp_sd->quantization; > + } > + mf->field = V4L2_FIELD_NONE; > + > + return 0; > +} > + > +static void rkisp1_isp_sd_try_fmt(struct v4l2_subdev *sd, > + unsigned int pad, > + struct v4l2_mbus_framefmt *fmt) > +{ > + struct rkisp1_device *isp_dev = sd_to_isp_dev(sd); > + struct rkisp1_isp_subdev *isp_sd = &isp_dev->isp_sdev; > + const struct ispsd_out_fmt *out_fmt; > + const struct ispsd_in_fmt *in_fmt; > + > + switch (pad) { > + case RKISP1_ISP_PAD_SINK: > + in_fmt = find_in_fmt(fmt->code); > + if (in_fmt) > + fmt->code = in_fmt->mbus_code; > + else > + fmt->code = MEDIA_BUS_FMT_SRGGB10_1X10; > + fmt->width = clamp_t(u32, fmt->width, CIF_ISP_INPUT_W_MIN, > + CIF_ISP_INPUT_W_MAX); > + fmt->height = clamp_t(u32, fmt->height, CIF_ISP_INPUT_H_MIN, > + CIF_ISP_INPUT_H_MAX); > + break; > + case RKISP1_ISP_PAD_SOURCE_PATH: > + out_fmt = find_out_fmt(fmt->code); > + if (out_fmt) > + fmt->code = out_fmt->mbus_code; > + else > + fmt->code = rkisp1_isp_output_formats[0].mbus_code; > + /* window size is set in s_selection */ > + fmt->width = isp_sd->out_crop.width; > + fmt->height = isp_sd->out_crop.height; > + /* full range by default */ > + if (!fmt->quantization) > + fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE; > + break; > + } > + > + fmt->field = V4L2_FIELD_NONE; > +} > + > +static int rkisp1_isp_sd_set_fmt(struct v4l2_subdev *sd, > + struct v4l2_subdev_pad_config *cfg, > + struct v4l2_subdev_format *fmt) > +{ > + struct rkisp1_device *isp_dev = sd_to_isp_dev(sd); > + struct rkisp1_isp_subdev *isp_sd = &isp_dev->isp_sdev; > + struct v4l2_mbus_framefmt *mf = &fmt->format; > + Note that for sub-device nodes, the driver is itself responsible for serialising the access to its data structures. > + if ((fmt->pad != RKISP1_ISP_PAD_SINK) && > + (fmt->pad != RKISP1_ISP_PAD_SOURCE_PATH)) > + return rkisp1_isp_sd_get_fmt(sd, cfg, fmt); > + > + rkisp1_isp_sd_try_fmt(sd, fmt->pad, mf); > + > + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > + struct v4l2_mbus_framefmt *try_mf; > + > + try_mf = v4l2_subdev_get_try_format(sd, cfg, fmt->pad); > + *try_mf = *mf; > + return 0; > + } > + > + if (fmt->pad == RKISP1_ISP_PAD_SINK) { > + const struct ispsd_in_fmt *in_fmt; > + > + in_fmt = find_in_fmt(mf->code); > + isp_sd->in_fmt = *in_fmt; > + isp_sd->in_frm = *mf; > + } else if (fmt->pad == RKISP1_ISP_PAD_SOURCE_PATH) { > + const struct ispsd_out_fmt *out_fmt; > + > + /* Ignore width/height */ > + out_fmt = find_out_fmt(mf->code); > + isp_sd->out_fmt = *out_fmt; > + /* > + * It is quantization for output, > + * isp use bt601 limit-range in internal > + */ > + isp_sd->quantization = mf->quantization; > + } > + > + return 0; > +} > + > +static void rkisp1_isp_sd_try_crop(struct v4l2_subdev *sd, > + struct v4l2_subdev_pad_config *cfg, > + struct v4l2_subdev_selection *sel) > +{ > + struct rkisp1_isp_subdev *isp_sd = sd_to_isp_sd(sd); > + struct v4l2_mbus_framefmt in_frm = isp_sd->in_frm; > + struct v4l2_rect in_crop = isp_sd->in_crop; > + struct v4l2_rect *input = &sel->r; > + > + if (sel->which == V4L2_SUBDEV_FORMAT_TRY) { > + in_frm = *v4l2_subdev_get_try_format(sd, cfg, > + RKISP1_ISP_PAD_SINK); > + in_crop = *v4l2_subdev_get_try_crop(sd, cfg, > + RKISP1_ISP_PAD_SINK); > + } > + > + input->left = ALIGN(input->left, 2); > + input->width = ALIGN(input->width, 2); > + > + if (sel->pad == RKISP1_ISP_PAD_SINK) { > + input->left = clamp_t(u32, input->left, 0, in_frm.width); > + input->top = clamp_t(u32, input->top, 0, in_frm.height); > + input->width = clamp_t(u32, input->width, CIF_ISP_INPUT_W_MIN, > + in_frm.width - input->left); > + input->height = clamp_t(u32, input->height, > + CIF_ISP_INPUT_H_MIN, > + in_frm.height - input->top); > + } else if (sel->pad == RKISP1_ISP_PAD_SOURCE_PATH) { > + input->left = clamp_t(u32, input->left, 0, in_crop.width); > + input->top = clamp_t(u32, input->top, 0, in_crop.height); > + input->width = clamp_t(u32, input->width, CIF_ISP_OUTPUT_W_MIN, > + in_crop.width - input->left); > + input->height = clamp_t(u32, input->height, > + CIF_ISP_OUTPUT_H_MIN, > + in_crop.height - input->top); > + } > +} > + > +static int rkisp1_isp_sd_get_selection(struct v4l2_subdev *sd, > + struct v4l2_subdev_pad_config *cfg, > + struct v4l2_subdev_selection *sel) > +{ > + struct rkisp1_isp_subdev *isp_sd = sd_to_isp_sd(sd); > + struct v4l2_mbus_framefmt *frm; > + struct v4l2_rect *rect; > + > + if (sel->pad != RKISP1_ISP_PAD_SOURCE_PATH && > + sel->pad != RKISP1_ISP_PAD_SINK) > + return -EINVAL; > + > + switch (sel->target) { > + case V4L2_SEL_TGT_CROP_BOUNDS: > + if (sel->pad == RKISP1_ISP_PAD_SINK) { > + if (sel->which == V4L2_SUBDEV_FORMAT_TRY) > + frm = v4l2_subdev_get_try_format(sd, cfg, > + sel->pad); > + else > + frm = &isp_sd->in_frm; > + > + sel->r.height = frm->height; > + sel->r.width = frm->width; > + sel->r.left = 0; > + sel->r.top = 0; > + } else { > + if (sel->which == V4L2_SUBDEV_FORMAT_TRY) > + rect = v4l2_subdev_get_try_crop(sd, cfg, > + RKISP1_ISP_PAD_SINK); > + else > + rect = &isp_sd->in_crop; > + sel->r = *rect; > + } > + break; > + case V4L2_SEL_TGT_CROP: > + if (sel->which == V4L2_SUBDEV_FORMAT_TRY) > + rect = v4l2_subdev_get_try_crop(sd, cfg, sel->pad); > + else if (sel->pad == RKISP1_ISP_PAD_SINK) > + rect = &isp_sd->in_crop; > + else > + rect = &isp_sd->out_crop; > + sel->r = *rect; > + break; > + default: > + return -EINVAL; > + } > + > + return 0; > +} > + > +static int rkisp1_isp_sd_set_selection(struct v4l2_subdev *sd, > + struct v4l2_subdev_pad_config *cfg, > + struct v4l2_subdev_selection *sel) > +{ > + struct rkisp1_isp_subdev *isp_sd = sd_to_isp_sd(sd); > + struct rkisp1_device *dev = sd_to_isp_dev(sd); > + > + if (sel->pad != RKISP1_ISP_PAD_SOURCE_PATH && > + sel->pad != RKISP1_ISP_PAD_SINK) > + return -EINVAL; > + if (sel->target != V4L2_SEL_TGT_CROP) > + return -EINVAL; > + > + v4l2_dbg(1, rkisp1_debug, &dev->v4l2_dev, > + "%s: pad: %d sel(%d,%d)/%dx%d\n", __func__, sel->pad, > + sel->r.left, sel->r.top, sel->r.width, sel->r.height); > + rkisp1_isp_sd_try_crop(sd, cfg, sel); > + > + if (sel->which == V4L2_SUBDEV_FORMAT_TRY) { > + struct v4l2_rect *try_sel = > + v4l2_subdev_get_try_crop(sd, cfg, sel->pad); > + > + *try_sel = sel->r; > + return 0; > + } > + > + if (sel->pad == RKISP1_ISP_PAD_SINK) > + isp_sd->in_crop = sel->r; > + else > + isp_sd->out_crop = sel->r; > + > + return 0; > +} > + > +static int mipi_csi2_s_stream_start(struct rkisp1_isp_subdev *isp_sd, > + struct rkisp1_sensor *sensor) > +{ > + union phy_configure_opts opts = { 0 }; > + struct phy_configure_opts_mipi_dphy *cfg = &opts.mipi_dphy; > + struct v4l2_ctrl *pixel_rate; > + s64 pixel_clock; > + > + pixel_rate = v4l2_ctrl_find(sensor->sd->ctrl_handler, > + V4L2_CID_PIXEL_RATE); > + if (!pixel_rate) { > + v4l2_warn(sensor->sd, "No pixel rate control in subdev\n"); > + return -EPIPE; > + } > + > + pixel_clock = v4l2_ctrl_g_ctrl_int64(pixel_rate); > + if (!pixel_clock) { > + v4l2_err(sensor->sd, "Invalid pixel rate value\n"); > + return -EINVAL; > + } > + > + phy_mipi_dphy_get_default_config(pixel_clock, isp_sd->in_fmt.bus_width, > + sensor->lanes, cfg); > + phy_set_mode(sensor->dphy, PHY_MODE_MIPI_DPHY); > + phy_configure(sensor->dphy, &opts); > + phy_power_on(sensor->dphy); > + > + return 0; > +} > + > +static void mipi_csi2_s_stream_stop(struct rkisp1_sensor *sensor) > +{ > + phy_power_off(sensor->dphy); > +} > + > +static int rkisp1_isp_sd_s_stream(struct v4l2_subdev *sd, int on) > +{ > + struct rkisp1_device *isp_dev = sd_to_isp_dev(sd); > + struct v4l2_subdev *sensor_sd; > + int ret = 0; > + > + if (!on) { > + ret = rkisp1_isp_stop(isp_dev); > + if (ret < 0) > + return ret; > + mipi_csi2_s_stream_stop(isp_dev->active_sensor); > + return 0; > + } > + > + sensor_sd = get_remote_sensor(sd); > + if (!sensor_sd) > + return -ENODEV; > + > + isp_dev->active_sensor = sd_to_sensor(isp_dev, sensor_sd); > + if (!isp_dev->active_sensor) > + return -ENODEV; > + > + atomic_set(&isp_dev->isp_sdev.frm_sync_seq, 0); > + ret = rkisp1_config_cif(isp_dev); > + if (ret < 0) > + return ret; > + > + /* TODO: support other interfaces */ > + if (isp_dev->active_sensor->mbus.type != V4L2_MBUS_CSI2_DPHY) > + return -EINVAL; > + > + ret = mipi_csi2_s_stream_start(&isp_dev->isp_sdev, > + isp_dev->active_sensor); > + if (ret < 0) > + return ret; > + > + ret = rkisp1_isp_start(isp_dev); > + if (ret) > + mipi_csi2_s_stream_stop(isp_dev->active_sensor); > + > + return ret; > +} > + > +static int rkisp1_isp_sd_s_power(struct v4l2_subdev *sd, int on) If you support runtime PM, you shouldn't implement the s_power op. You'll still need to call s_power on external subdevs though. > +{ > + struct rkisp1_device *isp_dev = sd_to_isp_dev(sd); > + int ret; > + > + v4l2_dbg(1, rkisp1_debug, &isp_dev->v4l2_dev, "s_power: %d\n", on); > + > + if (on) { > + ret = pm_runtime_get_sync(isp_dev->dev); > + if (ret < 0) > + return ret; > + > + rkisp1_config_clk(isp_dev); > + } else { > + ret = pm_runtime_put(isp_dev->dev); > + if (ret < 0) > + return ret; > + } > + > + return 0; > +} > + > +static int rkisp1_subdev_link_validate(struct media_link *link) > +{ > + if (link->source->index == RKISP1_ISP_PAD_SINK_PARAMS) Is this test correct? The source is the source end of the link, i.e. the video node. How about the links that end in a video node? > + return 0; > + > + return v4l2_subdev_link_validate(link); > +} > + > +static int rkisp1_subdev_fmt_link_validate(struct v4l2_subdev *sd, > + struct media_link *link, > + struct v4l2_subdev_format *source_fmt, > + struct v4l2_subdev_format *sink_fmt) > +{ > + if (source_fmt->format.code != sink_fmt->format.code) > + return -EINVAL; > + > + /* Crop is available */ > + if (source_fmt->format.width < sink_fmt->format.width || > + source_fmt->format.height < sink_fmt->format.height) > + return -EINVAL; > + Could you use v4l2_subdev_link_validate_default()? > + return 0; > +} > + > +static void rkisp1_isp_queue_event_sof(struct rkisp1_isp_subdev *isp) > +{ > + struct v4l2_event event = { > + .type = V4L2_EVENT_FRAME_SYNC, > + .u.frame_sync.frame_sequence = > + atomic_inc_return(&isp->frm_sync_seq) - 1, > + }; > + v4l2_event_queue(isp->sd.devnode, &event); > +} > + > +static int rkisp1_isp_sd_subs_evt(struct v4l2_subdev *sd, struct v4l2_fh *fh, > + struct v4l2_event_subscription *sub) > +{ > + if (sub->type != V4L2_EVENT_FRAME_SYNC) > + return -EINVAL; > + > + /* Line number. For now only zero accepted. */ > + if (sub->id != 0) > + return -EINVAL; > + > + return v4l2_event_subscribe(fh, sub, 0, NULL); > +} > + > +static const struct v4l2_subdev_pad_ops rkisp1_isp_sd_pad_ops = { > + .enum_mbus_code = rkisp1_isp_sd_enum_mbus_code, > + .get_selection = rkisp1_isp_sd_get_selection, > + .set_selection = rkisp1_isp_sd_set_selection, > + .init_cfg = rkisp1_isp_sd_init_config, > + .get_fmt = rkisp1_isp_sd_get_fmt, > + .set_fmt = rkisp1_isp_sd_set_fmt, > + .link_validate = rkisp1_subdev_fmt_link_validate, > +}; > + > +static const struct media_entity_operations rkisp1_isp_sd_media_ops = { > + .link_validate = rkisp1_subdev_link_validate, > +}; > + > +static const struct v4l2_subdev_video_ops rkisp1_isp_sd_video_ops = { > + .s_stream = rkisp1_isp_sd_s_stream, > +}; > + > +static const struct v4l2_subdev_core_ops rkisp1_isp_core_ops = { > + .subscribe_event = rkisp1_isp_sd_subs_evt, > + .unsubscribe_event = v4l2_event_subdev_unsubscribe, > + .s_power = rkisp1_isp_sd_s_power, > +}; > + > +static struct v4l2_subdev_ops rkisp1_isp_sd_ops = { const > + .core = &rkisp1_isp_core_ops, > + .video = &rkisp1_isp_sd_video_ops, > + .pad = &rkisp1_isp_sd_pad_ops, > +}; > + > +static void rkisp1_isp_sd_init_default_fmt(struct rkisp1_isp_subdev *isp_sd) > +{ > + struct v4l2_mbus_framefmt *in_frm = &isp_sd->in_frm; > + struct v4l2_rect *in_crop = &isp_sd->in_crop; > + struct v4l2_rect *out_crop = &isp_sd->out_crop; > + struct ispsd_in_fmt *in_fmt = &isp_sd->in_fmt; > + struct ispsd_out_fmt *out_fmt = &isp_sd->out_fmt; > + > + *in_fmt = rkisp1_isp_input_formats[0]; > + in_frm->width = RKISP1_DEFAULT_WIDTH; > + in_frm->height = RKISP1_DEFAULT_HEIGHT; > + in_frm->code = in_fmt->mbus_code; > + > + in_crop->width = in_frm->width; > + in_crop->height = in_frm->height; > + in_crop->left = 0; > + in_crop->top = 0; > + > + /* propagate to source */ > + *out_crop = *in_crop; > + *out_fmt = rkisp1_isp_output_formats[0]; > + isp_sd->quantization = V4L2_QUANTIZATION_FULL_RANGE; > +} > + > +int rkisp1_register_isp_subdev(struct rkisp1_device *isp_dev, > + struct v4l2_device *v4l2_dev) > +{ > + struct rkisp1_isp_subdev *isp_sdev = &isp_dev->isp_sdev; > + struct v4l2_subdev *sd = &isp_sdev->sd; > + int ret; > + > + v4l2_subdev_init(sd, &rkisp1_isp_sd_ops); > + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS; > + sd->entity.ops = &rkisp1_isp_sd_media_ops; > + snprintf(sd->name, sizeof(sd->name), "rkisp1-isp-subdev"); strscpy() > + > + isp_sdev->pads[RKISP1_ISP_PAD_SINK].flags = > + MEDIA_PAD_FL_SINK | MEDIA_PAD_FL_MUST_CONNECT; > + isp_sdev->pads[RKISP1_ISP_PAD_SINK_PARAMS].flags = MEDIA_PAD_FL_SINK; > + isp_sdev->pads[RKISP1_ISP_PAD_SOURCE_PATH].flags = MEDIA_PAD_FL_SOURCE; > + isp_sdev->pads[RKISP1_ISP_PAD_SOURCE_STATS].flags = MEDIA_PAD_FL_SOURCE; > + sd->entity.function = MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER; > + ret = media_entity_pads_init(&sd->entity, RKISP1_ISP_PAD_MAX, > + isp_sdev->pads); > + if (ret < 0) > + return ret; > + > + sd->owner = THIS_MODULE; > + v4l2_set_subdevdata(sd, isp_dev); > + > + sd->grp_id = GRP_ID_ISP; > + ret = v4l2_device_register_subdev(v4l2_dev, sd); > + if (ret < 0) { > + v4l2_err(sd, "Failed to register isp subdev\n"); > + goto err_cleanup_media_entity; > + } > + > + rkisp1_isp_sd_init_default_fmt(isp_sdev); > + > + return 0; A newline would be nice here. > +err_cleanup_media_entity: > + media_entity_cleanup(&sd->entity); And here. > + return ret; > +} > + > +void rkisp1_unregister_isp_subdev(struct rkisp1_device *isp_dev) > +{ > + struct v4l2_subdev *sd = &isp_dev->isp_sdev.sd; > + > + v4l2_device_unregister_subdev(sd); > + media_entity_cleanup(&sd->entity); > +} > + > +/**************** Interrupter Handler ****************/ > + > +void rkisp1_mipi_isr(unsigned int mis, struct rkisp1_device *dev) > +{ > + struct v4l2_device *v4l2_dev = &dev->v4l2_dev; > + void __iomem *base = dev->base_addr; > + u32 val; > + > + writel(~0, base + CIF_MIPI_ICR); > + > + /* > + * Disable DPHY errctrl interrupt, because this dphy > + * erctrl signal is asserted until the next changes > + * of line state. This time is may be too long and cpu > + * is hold in this interrupt. > + */ > + if (mis & CIF_MIPI_ERR_CTRL(0x0f)) { > + val = readl(base + CIF_MIPI_IMSC); > + writel(val & ~CIF_MIPI_ERR_CTRL(0x0f), base + CIF_MIPI_IMSC); > + dev->isp_sdev.dphy_errctrl_disabled = true; > + } > + > + /* > + * Enable DPHY errctrl interrupt again, if mipi have receive > + * the whole frame without any error. > + */ > + if (mis == CIF_MIPI_FRAME_END) { > + /* > + * Enable DPHY errctrl interrupt again, if mipi have receive > + * the whole frame without any error. > + */ > + if (dev->isp_sdev.dphy_errctrl_disabled) { > + val = readl(base + CIF_MIPI_IMSC); > + val |= CIF_MIPI_ERR_CTRL(0x0f); > + writel(val, base + CIF_MIPI_IMSC); > + dev->isp_sdev.dphy_errctrl_disabled = false; > + } > + } else { > + v4l2_warn(v4l2_dev, "MIPI mis error: 0x%08x\n", mis); > + } > +} > + > +void rkisp1_isp_isr(unsigned int isp_mis, struct rkisp1_device *dev) > +{ > + void __iomem *base = dev->base_addr; > + unsigned int isp_mis_tmp = 0; > + unsigned int isp_err = 0; > + > + /* start edge of v_sync */ > + if (isp_mis & CIF_ISP_V_START) { > + rkisp1_isp_queue_event_sof(&dev->isp_sdev); > + > + writel(CIF_ISP_V_START, base + CIF_ISP_ICR); > + isp_mis_tmp = readl(base + CIF_ISP_MIS); > + if (isp_mis_tmp & CIF_ISP_V_START) > + v4l2_err(&dev->v4l2_dev, "isp icr v_statr err: 0x%x\n", > + isp_mis_tmp); > + } > + > + if ((isp_mis & CIF_ISP_PIC_SIZE_ERROR)) { Extra parentheses. > + /* Clear pic_size_error */ > + writel(CIF_ISP_PIC_SIZE_ERROR, base + CIF_ISP_ICR); > + isp_err = readl(base + CIF_ISP_ERR); > + v4l2_err(&dev->v4l2_dev, > + "CIF_ISP_PIC_SIZE_ERROR (0x%08x)", isp_err); > + writel(isp_err, base + CIF_ISP_ERR_CLR); > + } else if ((isp_mis & CIF_ISP_DATA_LOSS)) { > + /* Clear data_loss */ > + writel(CIF_ISP_DATA_LOSS, base + CIF_ISP_ICR); > + v4l2_err(&dev->v4l2_dev, "CIF_ISP_DATA_LOSS\n"); > + writel(CIF_ISP_DATA_LOSS, base + CIF_ISP_ICR); > + } > + > + /* sampled input frame is complete */ > + if (isp_mis & CIF_ISP_FRAME_IN) { > + writel(CIF_ISP_FRAME_IN, base + CIF_ISP_ICR); > + isp_mis_tmp = readl(base + CIF_ISP_MIS); > + if (isp_mis_tmp & CIF_ISP_FRAME_IN) > + v4l2_err(&dev->v4l2_dev, "isp icr frame_in err: 0x%x\n", > + isp_mis_tmp); > + } > + > + /* frame was completely put out */ > + if (isp_mis & CIF_ISP_FRAME) { > + u32 isp_ris = 0; > + /* Clear Frame In (ISP) */ > + writel(CIF_ISP_FRAME, base + CIF_ISP_ICR); > + isp_mis_tmp = readl(base + CIF_ISP_MIS); > + if (isp_mis_tmp & CIF_ISP_FRAME) > + v4l2_err(&dev->v4l2_dev, > + "isp icr frame end err: 0x%x\n", isp_mis_tmp); > + > + isp_ris = readl(base + CIF_ISP_RIS); > + if (isp_ris & (CIF_ISP_AWB_DONE | CIF_ISP_AFM_FIN | > + CIF_ISP_EXP_END | CIF_ISP_HIST_MEASURE_RDY)) > + rkisp1_stats_isr(&dev->stats_vdev, isp_ris); > + } > + > + /* > + * Then update changed configs. Some of them involve > + * lot of register writes. Do those only one per frame. > + * Do the updates in the order of the processing flow. > + */ > + rkisp1_params_isr(&dev->params_vdev, isp_mis); > +} > diff --git a/drivers/media/platform/rockchip/isp1/rkisp1.h b/drivers/media/platform/rockchip/isp1/rkisp1.h > new file mode 100644 > index 000000000000..b0366e354ec2 > --- /dev/null > +++ b/drivers/media/platform/rockchip/isp1/rkisp1.h > @@ -0,0 +1,111 @@ > +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ > +/* > + * Rockchip isp1 driver > + * > + * Copyright (C) 2017 Rockchip Electronics Co., Ltd. > + */ > + > +#ifndef _RKISP1_H > +#define _RKISP1_H > + > +#include > +#include > + > +#include "common.h" > + > +struct rkisp1_stream; > + > +/* > + * struct ispsd_in_fmt - ISP intput-pad format > + * > + * Translate mbus_code to hardware format values > + * > + * @bus_width: used for parallel > + */ > +struct ispsd_in_fmt { > + u32 mbus_code; > + u8 fmt_type; > + u32 mipi_dt; > + u32 yuv_seq; > + enum rkisp1_fmt_raw_pat_type bayer_pat; > + u8 bus_width; > +}; > + > +struct ispsd_out_fmt { > + u32 mbus_code; > + u8 fmt_type; > +}; > + > +struct rkisp1_ie_config { > + unsigned int effect; > +}; > + > +enum rkisp1_isp_pad { > + RKISP1_ISP_PAD_SINK, > + RKISP1_ISP_PAD_SINK_PARAMS, > + RKISP1_ISP_PAD_SOURCE_PATH, > + RKISP1_ISP_PAD_SOURCE_STATS, > + RKISP1_ISP_PAD_MAX > +}; > + > +/* > + * struct rkisp1_isp_subdev - ISP sub-device > + * > + * See Cropping regions of ISP in rkisp1.c for details > + * @in_frm: input size, don't have to be equal to sensor size > + * @in_fmt: input format > + * @in_crop: crop for sink pad > + * @out_fmt: output format > + * @out_crop: output size > + * > + * @dphy_errctrl_disabled: if dphy errctrl is disabled(avoid endless interrupt) > + * @frm_sync_seq: frame sequence, to sync frame_id between video devices. > + * @quantization: output quantization > + */ > +struct rkisp1_isp_subdev { > + struct v4l2_subdev sd; > + struct media_pad pads[RKISP1_ISP_PAD_MAX]; > + struct v4l2_ctrl_handler ctrl_handler; > + struct v4l2_mbus_framefmt in_frm; > + struct ispsd_in_fmt in_fmt; > + struct v4l2_rect in_crop; > + struct ispsd_out_fmt out_fmt; > + struct v4l2_rect out_crop; > + bool dphy_errctrl_disabled; > + atomic_t frm_sync_seq; > + enum v4l2_quantization quantization; > +}; > + > +int rkisp1_register_isp_subdev(struct rkisp1_device *isp_dev, > + struct v4l2_device *v4l2_dev); > + > +void rkisp1_unregister_isp_subdev(struct rkisp1_device *isp_dev); > + > +void rkisp1_mipi_isr(unsigned int mipi_mis, struct rkisp1_device *dev); > + > +void rkisp1_isp_isr(unsigned int isp_mis, struct rkisp1_device *dev); > + > +static inline > +struct ispsd_out_fmt *rkisp1_get_ispsd_out_fmt(struct rkisp1_isp_subdev *isp_sdev) > +{ > + return &isp_sdev->out_fmt; > +} > + > +static inline > +struct ispsd_in_fmt *rkisp1_get_ispsd_in_fmt(struct rkisp1_isp_subdev *isp_sdev) > +{ > + return &isp_sdev->in_fmt; > +} > + > +static inline > +struct v4l2_rect *rkisp1_get_isp_sd_win(struct rkisp1_isp_subdev *isp_sdev) > +{ > + return &isp_sdev->out_crop; > +} I'd just use the struct fields directly in the code as it's easier to figure out which field in the struct is being accessed. > + > +static inline struct rkisp1_isp_subdev *sd_to_isp_sd(struct v4l2_subdev *sd) > +{ > + return container_of(sd, struct rkisp1_isp_subdev, sd); > +} > + > +#endif /* _RKISP1_H */ -- Kind regards, Sakari Ailus sakari.ailus@linux.intel.com _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel