From: Arnd Bergmann <arnd@arndb.de>
To: soc@kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Vladimir Zapolskiy <vz@mleia.com>,
Sylvain Lemieux <slemieux.tyco@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 07/13] net: lpc-enet: move phy setup into platform code
Date: Fri, 9 Aug 2019 16:40:33 +0200 [thread overview]
Message-ID: <20190809144043.476786-8-arnd@arndb.de> (raw)
In-Reply-To: <20190809144043.476786-1-arnd@arndb.de>
Setting the phy mode requires touching a platform specific
register, which prevents us from building the driver without
its header files.
Move it into a separate function in arch/arm/mach/lpc32xx
to hide the core registers from the network driver.
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-lpc32xx/common.c | 12 ++++++++++++
drivers/net/ethernet/nxp/lpc_eth.c | 12 +-----------
include/linux/soc/nxp/lpc32xx-misc.h | 5 +++++
3 files changed, 18 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
index f648324d5fb4..a475339333c1 100644
--- a/arch/arm/mach-lpc32xx/common.c
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -63,6 +63,18 @@ u32 lpc32xx_return_iram(void __iomem **mapbase, dma_addr_t *dmaaddr)
}
EXPORT_SYMBOL_GPL(lpc32xx_return_iram);
+void lpc32xx_set_phy_interface_mode(phy_interface_t mode)
+{
+ u32 tmp = __raw_readl(LPC32XX_CLKPWR_MACCLK_CTRL);
+ tmp &= ~LPC32XX_CLKPWR_MACCTRL_PINS_MSK;
+ if (mode == PHY_INTERFACE_MODE_MII)
+ tmp |= LPC32XX_CLKPWR_MACCTRL_USE_MII_PINS;
+ else
+ tmp |= LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS;
+ __raw_writel(tmp, LPC32XX_CLKPWR_MACCLK_CTRL);
+}
+EXPORT_SYMBOL_GPL(lpc32xx_set_phy_interface_mode);
+
static struct map_desc lpc32xx_io_desc[] __initdata = {
{
.virtual = (unsigned long)IO_ADDRESS(LPC32XX_AHB0_START),
diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c
index bcdd0adcfb0c..0893b77c385d 100644
--- a/drivers/net/ethernet/nxp/lpc_eth.c
+++ b/drivers/net/ethernet/nxp/lpc_eth.c
@@ -20,9 +20,6 @@
#include <linux/spinlock.h>
#include <linux/soc/nxp/lpc32xx-misc.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
#define MODNAME "lpc-eth"
#define DRV_VERSION "1.00"
@@ -1237,16 +1234,9 @@ static int lpc_eth_drv_probe(struct platform_device *pdev)
dma_addr_t dma_handle;
struct resource *res;
int irq, ret;
- u32 tmp;
/* Setup network interface for RMII or MII mode */
- tmp = __raw_readl(LPC32XX_CLKPWR_MACCLK_CTRL);
- tmp &= ~LPC32XX_CLKPWR_MACCTRL_PINS_MSK;
- if (lpc_phy_interface_mode(dev) == PHY_INTERFACE_MODE_MII)
- tmp |= LPC32XX_CLKPWR_MACCTRL_USE_MII_PINS;
- else
- tmp |= LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS;
- __raw_writel(tmp, LPC32XX_CLKPWR_MACCLK_CTRL);
+ lpc32xx_set_phy_interface_mode(lpc_phy_interface_mode(dev));
/* Get platform resources */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/include/linux/soc/nxp/lpc32xx-misc.h b/include/linux/soc/nxp/lpc32xx-misc.h
index f232e1a1bcdc..af4f82f6cf3b 100644
--- a/include/linux/soc/nxp/lpc32xx-misc.h
+++ b/include/linux/soc/nxp/lpc32xx-misc.h
@@ -9,9 +9,11 @@
#define __SOC_LPC32XX_MISC_H
#include <linux/types.h>
+#include <linux/phy.h>
#ifdef CONFIG_ARCH_LPC32XX
extern u32 lpc32xx_return_iram(void __iomem **mapbase, dma_addr_t *dmaaddr);
+extern void lpc32xx_set_phy_interface_mode(phy_interface_t mode);
#else
static inline u32 lpc32xx_return_iram(void __iomem **mapbase, dma_addr_t *dmaaddr)
{
@@ -19,6 +21,9 @@ static inline u32 lpc32xx_return_iram(void __iomem **mapbase, dma_addr_t *dmaadd
*dmaaddr = 0;
return 0;
}
+static inline void lpc32xx_set_phy_interface_mode(phy_interface_t mode)
+{
+}
#endif
#endif /* __SOC_LPC32XX_MISC_H */
--
2.20.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-08-09 14:44 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-09 14:40 [PATCH v2 00/13] v2: ARM: move lpc32xx to multiplatform Arnd Bergmann
2019-08-09 14:40 ` [PATCH v2 01/13] usb: ohci-nxp: enable compile-testing Arnd Bergmann
2019-08-15 12:42 ` Greg Kroah-Hartman
2019-08-09 14:40 ` [PATCH v2 02/13] usb: udc: lpc32xx: allow compile-testing Arnd Bergmann
2019-08-09 14:40 ` [PATCH v2 03/13] watchdog: pnx4008_wdt: " Arnd Bergmann
2019-08-09 14:40 ` [PATCH v2 04/13] serial: lpc32xx_hs: " Arnd Bergmann
2019-08-09 14:40 ` [PATCH v2 05/13] gpio: lpc32xx: allow building on non-lpc32xx targets Arnd Bergmann
2019-08-12 7:09 ` Bartosz Golaszewski
2019-08-09 14:40 ` [PATCH v2 06/13] net: lpc-enet: factor out iram access Arnd Bergmann
2019-08-09 14:40 ` Arnd Bergmann [this message]
2019-08-09 14:40 ` [PATCH v2 08/13] net: lpc-enet: fix badzero.cocci warnings Arnd Bergmann
2019-08-09 14:40 ` [PATCH v2 09/13] net: lpc-enet: fix printk format strings Arnd Bergmann
2019-08-09 16:30 ` Joe Perches
2019-08-09 18:20 ` Arnd Bergmann
2019-08-09 14:40 ` [PATCH v2 10/13] net: lpc-enet: allow compile testing Arnd Bergmann
2019-08-09 14:40 ` [PATCH v2 11/13] serial: lpc32xx: " Arnd Bergmann
2019-08-15 13:40 ` Greg Kroah-Hartman
2019-08-09 14:40 ` [PATCH v2 12/13] ARM: lpc32xx: clean up header files Arnd Bergmann
2019-08-09 14:40 ` [PATCH v2 13/13] ARM: lpc32xx: allow multiplatform build Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190809144043.476786-8-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=davem@davemloft.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=slemieux.tyco@gmail.com \
--cc=soc@kernel.org \
--cc=vz@mleia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).