Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: "Uwe Kleine-König" <uwe@kleine-koenig.org>
To: Nicolas Ferre <nicolas.ferre@microchip.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/9] ARM: dts: at91: kizboxmini: Style cleanup
Date: Mon, 12 Aug 2019 23:27:53 +0200
Message-ID: <20190812212757.23432-5-uwe@kleine-koenig.org> (raw)
In-Reply-To: <20190812212757.23432-1-uwe@kleine-koenig.org>

- use tags from included dtsi instead of duplicating the hierarchy

There are no differences in the generated .dtb

Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
---
 arch/arm/boot/dts/at91-kizboxmini.dts | 179 +++++++++++++-------------
 1 file changed, 88 insertions(+), 91 deletions(-)

diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts
index 0620dcdf4dfb..cb22f5fb055f 100644
--- a/arch/arm/boot/dts/at91-kizboxmini.dts
+++ b/arch/arm/boot/dts/at91-kizboxmini.dts
@@ -32,96 +32,6 @@
 	};
 
 	ahb {
-		apb {
-			tcb0: timer@f8008000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>;
-				};
-
-				timer@1 {
-					compatible = "atmel,tcb-timer";
-					reg = <1>;
-				};
-			};
-
-			usart0: serial@f801c000 {
-				status = "okay";
-			};
-
-			macb0: ethernet@f802c000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			pwm0: pwm@f8034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_pwm0_pwm0_1
-					     &pinctrl_pwm0_pwm1_1>;
-				status = "okay";
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			watchdog@fffffe40 {
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@600000 {
-			num-ports = <1>;
-			status = "okay";
-		};
-
-		usb1: ehci@700000 {
-			status = "okay";
-		};
-
-		ebi: ebi@10000000 {
-			pinctrl-0 = <&pinctrl_ebi_addr_nand
-				     &pinctrl_ebi_data_0_7>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_nand_oe_we
-					     &pinctrl_nand_cs
-					     &pinctrl_nand_rb>;
-				pinctrl-names = "default";
-
-				nand@3 {
-					reg = <0x3 0x0 0x800000>;
-					rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "hw";
-					nand-ecc-strength = <4>;
-					nand-ecc-step-size = <512>;
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						bootstrap@0 {
-							label = "bootstrap";
-							reg = <0x0 0x20000>;
-						};
-
-						ubi@20000 {
-							label = "ubi";
-							reg = <0x20000 0x7fe0000>;
-						};
-					};
-				};
-			};
-		};
-
 		nand0: nand@40000000 {
 			nand-bus-width = <8>;
 			nand-ecc-mode = "hw";
@@ -130,7 +40,6 @@
 			atmel,pmecc-sector-size = <512>;
 			nand-on-flash-bbt;
 			status = "okay";
-
 		};
 	};
 
@@ -172,3 +81,91 @@
 		};
 	};
 };
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_addr_nand
+		     &pinctrl_ebi_data_0_7>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	nand-controller {
+		pinctrl-0 = <&pinctrl_nand_oe_we
+			     &pinctrl_nand_cs
+			     &pinctrl_nand_rb>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <4>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				bootstrap@0 {
+					label = "bootstrap";
+					reg = <0x0 0x20000>;
+				};
+
+				ubi@20000 {
+					label = "ubi";
+					reg = <0x20000 0x7fe0000>;
+				};
+			};
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_pwm0_1
+		     &pinctrl_pwm0_pwm1_1>;
+	status = "okay";
+};
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usart0 {
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <1>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply index

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-12 21:27 [PATCH 1/9] ARM: dts: at91: Add label for sam9x5's internal RTC Uwe Kleine-König
2019-08-12 21:27 ` [PATCH 2/9] ARM: dts: at91: ariag25: Style cleanup Uwe Kleine-König
2019-08-21 16:43   ` Alexandre Belloni
2019-08-12 21:27 ` [PATCH 3/9] ARM: dts: at91: ariettag25: style cleanup Uwe Kleine-König
2019-08-21 16:44   ` Alexandre Belloni
2019-08-12 21:27 ` [PATCH 4/9] ARM: dts: at91: cosino: Style cleanup Uwe Kleine-König
2019-08-21 16:44   ` Alexandre Belloni
2019-08-12 21:27 ` Uwe Kleine-König [this message]
2019-08-21 16:45   ` [PATCH 5/9] ARM: dts: at91: kizboxmini: " Alexandre Belloni
2019-08-12 21:27 ` [PATCH 6/9] ARM: dts: at91: at91sam9g15: " Uwe Kleine-König
2019-08-21 16:46   ` Alexandre Belloni
2019-08-12 21:27 ` [PATCH 7/9] ARM: dts: at91: at91sam9xx5ek: " Uwe Kleine-König
2019-08-21 16:46   ` Alexandre Belloni
2019-08-12 21:27 ` [PATCH 8/9] ARM: dts: at91: at91sam9x5_lcd.dtsi: " Uwe Kleine-König
2019-08-21 16:47   ` Alexandre Belloni
2019-08-12 21:27 ` [PATCH 9/9] ARM: dts: at91: at91sam9x5dm.dtsi: " Uwe Kleine-König
2019-08-21 16:48   ` Alexandre Belloni
2019-08-21 16:43 ` [PATCH 1/9] ARM: dts: at91: Add label for sam9x5's internal RTC Alexandre Belloni

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190812212757.23432-5-uwe@kleine-koenig.org \
    --to=uwe@kleine-koenig.org \
    --cc=alexandre.belloni@bootlin.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=ludovic.desroches@microchip.com \
    --cc=nicolas.ferre@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git