linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime.ripard@bootlin.com>
To: codekipper@gmail.com
Cc: alsa-devel@alsa-project.org, linux-sunxi@googlegroups.com,
	linux-kernel@vger.kernel.org, lgirdwood@gmail.com,
	be17068@iperbole.bo.it, wens@csie.org, broonie@kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v5 01/15] ASoC: sun4i-i2s: Add regmap field to sign extend sample
Date: Wed, 14 Aug 2019 08:43:39 +0200	[thread overview]
Message-ID: <20190814064339.lgfngdkiaalygolk@flea> (raw)
In-Reply-To: <20190814060854.26345-2-codekipper@gmail.com>


[-- Attachment #1.1: Type: text/plain, Size: 4571 bytes --]

Hi,

On Wed, Aug 14, 2019 at 08:08:40AM +0200, codekipper@gmail.com wrote:
> From: Marcus Cooper <codekipper@gmail.com>
>
> On the newer SoCs such as the H3 and A64 this is set by default
> to transfer a 0 after each sample in each slot. However the A10
> and A20 SoCs that this driver was developed on had a default
> setting where it padded the audio gain with zeros.
>
> This isn't a problem whilst we have only support for 16bit audio
> but with larger sample resolution rates in the pipeline then SEXT
> bits should be cleared so that they also pad at the LSB. Without
> this the audio gets distorted.
>
> Signed-off-by: Marcus Cooper <codekipper@gmail.com>
> ---
>  sound/soc/sunxi/sun4i-i2s.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
>
> diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
> index 793457394efe..8201334a059b 100644
> --- a/sound/soc/sunxi/sun4i-i2s.c
> +++ b/sound/soc/sunxi/sun4i-i2s.c
> @@ -135,6 +135,7 @@ struct sun4i_i2s;
>   * @field_fmt_bclk: regmap field to set clk polarity.
>   * @field_fmt_lrclk: regmap field to set frame polarity.
>   * @field_fmt_mode: regmap field to set the operational mode.
> + * @field_fmt_sext: regmap field to set the sign extension.
>   * @field_txchanmap: location of the tx channel mapping register.
>   * @field_rxchanmap: location of the rx channel mapping register.
>   * @field_txchansel: location of the tx channel select bit fields.
> @@ -159,6 +160,7 @@ struct sun4i_i2s_quirks {
>  	struct reg_field		field_fmt_bclk;
>  	struct reg_field		field_fmt_lrclk;
>  	struct reg_field		field_fmt_mode;
> +	struct reg_field		field_fmt_sext;
>  	struct reg_field		field_txchanmap;
>  	struct reg_field		field_rxchanmap;
>  	struct reg_field		field_txchansel;
> @@ -186,6 +188,7 @@ struct sun4i_i2s {
>  	struct regmap_field	*field_fmt_bclk;
>  	struct regmap_field	*field_fmt_lrclk;
>  	struct regmap_field	*field_fmt_mode;
> +	struct regmap_field	*field_fmt_sext;
>  	struct regmap_field	*field_txchanmap;
>  	struct regmap_field	*field_rxchanmap;
>  	struct regmap_field	*field_txchansel;
> @@ -345,6 +348,9 @@ static int sun4i_i2s_set_clk_rate(struct snd_soc_dai *dai,
>  				   SUN8I_I2S_FMT0_LRCK_PERIOD_MASK,
>  				   SUN8I_I2S_FMT0_LRCK_PERIOD(32));
>
> +	/* Set sign extension to pad out LSB with 0 */
> +	regmap_field_write(i2s->field_fmt_sext, 0);
> +
>  	return 0;
>  }
>
> @@ -917,6 +923,7 @@ static const struct sun4i_i2s_quirks sun4i_a10_i2s_quirks = {
>  	.field_fmt_lrclk	= REG_FIELD(SUN4I_I2S_FMT0_REG, 7, 7),
>  	.has_slave_select_bit	= true,
>  	.field_fmt_mode		= REG_FIELD(SUN4I_I2S_FMT0_REG, 0, 1),
> +	.field_fmt_sext		= REG_FIELD(SUN4I_I2S_FMT1_REG, 8, 8),
>  	.field_txchanmap	= REG_FIELD(SUN4I_I2S_TX_CHAN_MAP_REG, 0, 31),
>  	.field_rxchanmap	= REG_FIELD(SUN4I_I2S_RX_CHAN_MAP_REG, 0, 31),
>  	.field_txchansel	= REG_FIELD(SUN4I_I2S_TX_CHAN_SEL_REG, 0, 2),
> @@ -936,6 +943,7 @@ static const struct sun4i_i2s_quirks sun6i_a31_i2s_quirks = {
>  	.field_fmt_lrclk	= REG_FIELD(SUN4I_I2S_FMT0_REG, 7, 7),
>  	.has_slave_select_bit	= true,
>  	.field_fmt_mode		= REG_FIELD(SUN4I_I2S_FMT0_REG, 0, 1),
> +	.field_fmt_sext		= REG_FIELD(SUN4I_I2S_FMT1_REG, 8, 8),
>  	.field_txchanmap	= REG_FIELD(SUN4I_I2S_TX_CHAN_MAP_REG, 0, 31),
>  	.field_rxchanmap	= REG_FIELD(SUN4I_I2S_RX_CHAN_MAP_REG, 0, 31),
>  	.field_txchansel	= REG_FIELD(SUN4I_I2S_TX_CHAN_SEL_REG, 0, 2),
> @@ -979,6 +987,7 @@ static const struct sun4i_i2s_quirks sun8i_h3_i2s_quirks = {
>  	.field_fmt_bclk		= REG_FIELD(SUN4I_I2S_FMT0_REG, 7, 7),
>  	.field_fmt_lrclk	= REG_FIELD(SUN4I_I2S_FMT0_REG, 19, 19),
>  	.field_fmt_mode		= REG_FIELD(SUN4I_I2S_CTRL_REG, 4, 5),
> +	.field_fmt_sext		= REG_FIELD(SUN4I_I2S_FMT1_REG, 4, 5),
>  	.field_txchanmap	= REG_FIELD(SUN8I_I2S_TX_CHAN_MAP_REG, 0, 31),
>  	.field_rxchanmap	= REG_FIELD(SUN8I_I2S_RX_CHAN_MAP_REG, 0, 31),
>  	.field_txchansel	= REG_FIELD(SUN8I_I2S_TX_CHAN_SEL_REG, 0, 2),
> @@ -998,6 +1007,7 @@ static const struct sun4i_i2s_quirks sun50i_a64_codec_i2s_quirks = {
>  	.field_fmt_bclk		= REG_FIELD(SUN4I_I2S_FMT0_REG, 6, 6),
>  	.field_fmt_lrclk	= REG_FIELD(SUN4I_I2S_FMT0_REG, 7, 7),
>  	.field_fmt_mode		= REG_FIELD(SUN4I_I2S_FMT0_REG, 0, 1),
> +	.field_fmt_sext		= REG_FIELD(SUN4I_I2S_FMT1_REG, 8, 8),
>  	.field_txchanmap	= REG_FIELD(SUN4I_I2S_TX_CHAN_MAP_REG, 0, 31),
>  	.field_rxchanmap	= REG_FIELD(SUN4I_I2S_RX_CHAN_MAP_REG, 0, 31),
>  	.field_txchansel	= REG_FIELD(SUN4I_I2S_TX_CHAN_SEL_REG, 0, 2),

You're missing the A83t here

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2019-08-14 11:10 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-14  6:08 [PATCH v5 00/15] ASoC: sun4i-i2s: Updates to the driver codekipper
2019-08-14  6:08 ` [PATCH v5 01/15] ASoC: sun4i-i2s: Add regmap field to sign extend sample codekipper
2019-08-14  6:43   ` Maxime Ripard [this message]
2019-08-14 11:24     ` Code Kipper
2019-08-14  6:08 ` [PATCH v5 02/15] ASoC: sun4i-i2s: Add set_tdm_slot functionality codekipper
2019-08-14  7:09   ` Maxime Ripard
2019-08-16  6:27     ` Code Kipper
2019-08-14  9:30   ` Mark Brown
2019-08-16  6:22     ` Code Kipper
2019-08-14  6:08 ` [PATCH v5 03/15] ASoC: sun4i-i2s: Correct divider calculations codekipper
2019-08-14  7:13   ` Maxime Ripard
2019-08-14  9:31   ` Mark Brown
2019-08-14  6:08 ` [PATCH v5 04/15] ASoC: sun4i-i2s: Support more formats on newer SoCs codekipper
2019-08-14  7:16   ` Maxime Ripard
2019-08-14 11:23     ` Code Kipper
2019-08-14  6:08 ` [PATCH v5 05/15] ASoC: sun4i-i2s: Add functions for RX and TX channel offsets codekipper
2019-08-14  6:08 ` [PATCH v5 06/15] ASoC: sun4i-i2s: Add functions for RX and TX channel enables codekipper
2019-08-14  6:08 ` [PATCH v5 07/15] ASoC: sun4i-i2s: Add functions for RX and TX channel selects codekipper
2019-08-14  6:08 ` [PATCH v5 08/15] ASoC: sun4i-i2s: Add functions for channel mapping codekipper
2019-08-14  6:08 ` [PATCH v5 09/15] clk: sunxi-ng: h6: Allow I2S to change parent rate codekipper
2019-08-21  4:07   ` [linux-sunxi] " Chen-Yu Tsai
2019-08-21  5:52     ` Code Kipper
2019-08-21  6:01       ` Chen-Yu Tsai
2019-08-21  9:19   ` Code Kipper
2019-08-21  9:35     ` [linux-sunxi] " Chen-Yu Tsai
2019-08-14  6:08 ` [PATCH v5 10/15] dt-bindings: ASoC: sun4i-i2s: Add H6 compatible codekipper
2019-08-14  6:08 ` [PATCH v5 11/15] ASoC: sun4i-i2s: Add support for H6 I2S codekipper
2019-08-14  7:57   ` Jernej Škrabec
2019-08-14 11:08     ` Code Kipper
2019-08-14  6:08 ` [PATCH v5 12/15] ASoC: sun4i-i2s: Add multi-lane functionality codekipper
2019-08-14  7:20   ` Maxime Ripard
2019-08-14 11:16     ` Code Kipper
2019-08-14  8:27   ` [linux-sunxi] " Jernej Škrabec
2019-08-14  6:08 ` [PATCH v5 13/15] ASoC: sun4i-i2s: Add multichannel functionality codekipper
2019-08-14  6:08 ` [PATCH v5 14/15] ASoc: sun4i-i2s: Add 20, 24 and 32 bit support codekipper
2019-08-14  8:28   ` [linux-sunxi] " Jernej Škrabec
2019-08-14  9:03     ` Code Kipper
2019-08-14  6:08 ` [PATCH v5 15/15] ASoC: sun4i-i2s: Adjust regmap settings codekipper
2019-08-14  7:20   ` Maxime Ripard
2019-08-14 11:31     ` [linux-sunxi] " Jernej Škrabec
2019-08-14  8:37   ` [linux-sunxi] " Jernej Škrabec
2019-08-14  9:02     ` Code Kipper
2019-08-14 11:31   ` Chen-Yu Tsai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190814064339.lgfngdkiaalygolk@flea \
    --to=maxime.ripard@bootlin.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=be17068@iperbole.bo.it \
    --cc=broonie@kernel.org \
    --cc=codekipper@gmail.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).