Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Dariusz Marcinkiewicz <darekm@google.com>
To: dri-devel@lists.freedesktop.org, linux-media@vger.kernel.org,
	 hverkuil-cisco@xs4all.nl
Cc: linux-samsung-soc@vger.kernel.org,
	Joonyoung Shim <jy0922.shim@samsung.com>,
	David Airlie <airlied@linux.ie>,
	Seung-Woo Kim <sw0312.kim@samsung.com>,
	linux-kernel@vger.kernel.org,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Inki Dae <inki.dae@samsung.com>,
	Kyungmin Park <kyungmin.park@samsung.com>,
	Kukjin Kim <kgene@kernel.org>, Daniel Vetter <daniel@ffwll.ch>,
	Dariusz Marcinkiewicz <darekm@google.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 9/9] drm: exynos: exynos_hdmi: use cec_notifier_conn_(un)register
Date: Wed, 14 Aug 2019 12:45:07 +0200
Message-ID: <20190814104520.6001-10-darekm@google.com> (raw)
In-Reply-To: <20190814104520.6001-1-darekm@google.com>

Use the new cec_notifier_conn_(un)register() functions to
(un)register the notifier for the HDMI connector, and fill in
the cec_connector_info.

Changes since v2:
	- removed unnecessary call to invalidate phys address before
	deregistering the notifier,
	- use cec_notifier_phys_addr_invalidate instead of setting
	invalid address on a notifier.

Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
---
 drivers/gpu/drm/exynos/exynos_hdmi.c | 31 ++++++++++++++++------------
 1 file changed, 18 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
index bc1565f1822ab..d532b468d9af5 100644
--- a/drivers/gpu/drm/exynos/exynos_hdmi.c
+++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
@@ -852,6 +852,10 @@ static enum drm_connector_status hdmi_detect(struct drm_connector *connector,
 
 static void hdmi_connector_destroy(struct drm_connector *connector)
 {
+	struct hdmi_context *hdata = connector_to_hdmi(connector);
+
+	cec_notifier_conn_unregister(hdata->notifier);
+
 	drm_connector_unregister(connector);
 	drm_connector_cleanup(connector);
 }
@@ -935,6 +939,7 @@ static int hdmi_create_connector(struct drm_encoder *encoder)
 {
 	struct hdmi_context *hdata = encoder_to_hdmi(encoder);
 	struct drm_connector *connector = &hdata->connector;
+	struct cec_connector_info conn_info;
 	int ret;
 
 	connector->interlace_allowed = true;
@@ -957,6 +962,15 @@ static int hdmi_create_connector(struct drm_encoder *encoder)
 			DRM_DEV_ERROR(hdata->dev, "Failed to attach bridge\n");
 	}
 
+	cec_fill_conn_info_from_drm(&conn_info, connector);
+
+	hdata->notifier = cec_notifier_conn_register(hdata->dev, NULL,
+						     &conn_info);
+	if (hdata->notifier == NULL) {
+		ret = -ENOMEM;
+		DRM_DEV_ERROR(hdata->dev, "Failed to allocate CEC notifier\n");
+	}
+
 	return ret;
 }
 
@@ -1528,8 +1542,8 @@ static void hdmi_disable(struct drm_encoder *encoder)
 		 */
 		mutex_unlock(&hdata->mutex);
 		cancel_delayed_work(&hdata->hotplug_work);
-		cec_notifier_set_phys_addr(hdata->notifier,
-					   CEC_PHYS_ADDR_INVALID);
+		if (hdata->notifier)
+			cec_notifier_phys_addr_invalidate(hdata->notifier);
 		return;
 	}
 
@@ -2006,12 +2020,6 @@ static int hdmi_probe(struct platform_device *pdev)
 		}
 	}
 
-	hdata->notifier = cec_notifier_get(&pdev->dev);
-	if (hdata->notifier == NULL) {
-		ret = -ENOMEM;
-		goto err_hdmiphy;
-	}
-
 	pm_runtime_enable(dev);
 
 	audio_infoframe = &hdata->audio.infoframe;
@@ -2023,7 +2031,7 @@ static int hdmi_probe(struct platform_device *pdev)
 
 	ret = hdmi_register_audio_device(hdata);
 	if (ret)
-		goto err_notifier_put;
+		goto err_runtime_disable;
 
 	ret = component_add(&pdev->dev, &hdmi_component_ops);
 	if (ret)
@@ -2034,8 +2042,7 @@ static int hdmi_probe(struct platform_device *pdev)
 err_unregister_audio:
 	platform_device_unregister(hdata->audio.pdev);
 
-err_notifier_put:
-	cec_notifier_put(hdata->notifier);
+err_runtime_disable:
 	pm_runtime_disable(dev);
 
 err_hdmiphy:
@@ -2054,12 +2061,10 @@ static int hdmi_remove(struct platform_device *pdev)
 	struct hdmi_context *hdata = platform_get_drvdata(pdev);
 
 	cancel_delayed_work_sync(&hdata->hotplug_work);
-	cec_notifier_set_phys_addr(hdata->notifier, CEC_PHYS_ADDR_INVALID);
 
 	component_del(&pdev->dev, &hdmi_component_ops);
 	platform_device_unregister(hdata->audio.pdev);
 
-	cec_notifier_put(hdata->notifier);
 	pm_runtime_disable(&pdev->dev);
 
 	if (!IS_ERR(hdata->reg_hdmi_en))
-- 
2.23.0.rc1.153.gdeed80330f-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply index

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-14 10:44 [PATCH v7 0/9] drm: cec: convert DRM drivers to the new notifier API Dariusz Marcinkiewicz
2019-08-14 10:45 ` Dariusz Marcinkiewicz [this message]
2019-08-19  9:32   ` [PATCH v7 9/9] drm: exynos: exynos_hdmi: use cec_notifier_conn_(un)register Hans Verkuil
2019-08-28  8:39   ` Sylwester Nawrocki
2019-08-28 12:34     ` [PATCH v7.1 " Dariusz Marcinkiewicz
2019-08-28 12:38     ` [PATCH v7 " Dariusz Marcinkiewicz
2019-08-19  9:38 ` [PATCH v7 0/9] drm: cec: convert DRM drivers to the new notifier API Hans Verkuil
2019-08-19 11:28   ` Dariusz Marcinkiewicz
2019-08-19 12:00     ` Hans Verkuil
2019-08-19 14:48   ` Neil Armstrong
2019-08-19 14:55     ` Hans Verkuil

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190814104520.6001-10-darekm@google.com \
    --to=darekm@google.com \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=inki.dae@samsung.com \
    --cc=jy0922.shim@samsung.com \
    --cc=kgene@kernel.org \
    --cc=krzk@kernel.org \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=sw0312.kim@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git