Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2 0/7] Add Bitmain BM1880 clock driver
@ 2019-08-17 18:36 Manivannan Sadhasivam
  2019-08-17 18:36 ` [PATCH v2 1/7] dt-bindings: clock: Add devicetree binding for BM1880 SoC Manivannan Sadhasivam
                   ` (6 more replies)
  0 siblings, 7 replies; 8+ messages in thread
From: Manivannan Sadhasivam @ 2019-08-17 18:36 UTC (permalink / raw)
  To: sboyd, mturquette, robh+dt
  Cc: devicetree, Manivannan Sadhasivam, darren.tsao, linux-kernel,
	linux-arm-kernel, fisher.cheng, alec.lin, linux-clk, haitao.suo

Hello,

This patchset adds common clock driver for Bitmain BM1880 SoC clock
controller. The clock controller consists of gate, divider, mux
and pll clocks with different compositions. Hence, the driver uses
composite clock structure in place where multiple clocking units are
combined together.

This patchset also removes UART fixed clock and sources clocks from clock
controller for Sophon Edge board where the driver has been validated.

Thanks,
Mani

Changes in v2:

* Converted the dt binding to YAML
* Incorporated review comments from Stephen (majority of change is switching
  to new way of specifying clk parents)

Manivannan Sadhasivam (7):
  dt-bindings: clock: Add devicetree binding for BM1880 SoC
  arm64: dts: bitmain: Add clock controller support for BM1880 SoC
  arm64: dts: bitmain: Source common clock for UART controllers
  clk: Add common clock driver for BM1880 SoC
  MAINTAINERS: Add entry for BM1880 SoC clock driver
  clk: Warn if clk_init_data is not zero initialized
  clk: Zero init clk_init_data in helpers

 .../bindings/clock/bitmain,bm1880-clk.yaml    |  83 ++
 MAINTAINERS                                   |   2 +
 .../boot/dts/bitmain/bm1880-sophon-edge.dts   |   9 -
 arch/arm64/boot/dts/bitmain/bm1880.dtsi       |  28 +
 drivers/clk/Kconfig                           |   6 +
 drivers/clk/Makefile                          |   1 +
 drivers/clk/clk-bm1880.c                      | 970 ++++++++++++++++++
 drivers/clk/clk-composite.c                   |   2 +-
 drivers/clk/clk-divider.c                     |   2 +-
 drivers/clk/clk-fixed-rate.c                  |   2 +-
 drivers/clk/clk-gate.c                        |   2 +-
 drivers/clk/clk-mux.c                         |   2 +-
 drivers/clk/clk.c                             |   8 +
 include/dt-bindings/clock/bm1880-clock.h      |  82 ++
 14 files changed, 1185 insertions(+), 14 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
 create mode 100644 drivers/clk/clk-bm1880.c
 create mode 100644 include/dt-bindings/clock/bm1880-clock.h

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, back to index

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-17 18:36 [PATCH v2 0/7] Add Bitmain BM1880 clock driver Manivannan Sadhasivam
2019-08-17 18:36 ` [PATCH v2 1/7] dt-bindings: clock: Add devicetree binding for BM1880 SoC Manivannan Sadhasivam
2019-08-17 18:36 ` [PATCH v2 2/7] arm64: dts: bitmain: Add clock controller support " Manivannan Sadhasivam
2019-08-17 18:36 ` [PATCH v2 3/7] arm64: dts: bitmain: Source common clock for UART controllers Manivannan Sadhasivam
2019-08-17 18:36 ` [PATCH v2 4/7] clk: Add common clock driver for BM1880 SoC Manivannan Sadhasivam
2019-08-17 18:36 ` [PATCH v2 5/7] MAINTAINERS: Add entry for BM1880 SoC clock driver Manivannan Sadhasivam
2019-08-17 18:36 ` [PATCH v2 6/7] clk: Warn if clk_init_data is not zero initialized Manivannan Sadhasivam
2019-08-17 18:36 ` [PATCH v2 7/7] clk: Zero init clk_init_data in helpers Manivannan Sadhasivam

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org infradead-linux-arm-kernel@archiver.kernel.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox