Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: sboyd@kernel.org, mturquette@baylibre.com, robh+dt@kernel.org
Cc: devicetree@vger.kernel.org,
	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
	darren.tsao@bitmain.com, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, fisher.cheng@bitmain.com,
	alec.lin@bitmain.com, linux-clk@vger.kernel.org,
	haitao.suo@bitmain.com
Subject: [PATCH v2 3/7] arm64: dts: bitmain: Source common clock for UART controllers
Date: Sun, 18 Aug 2019 00:06:10 +0530
Message-ID: <20190817183614.8429-4-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20190817183614.8429-1-manivannan.sadhasivam@linaro.org>

Remove fixed clock and source common clock for UART controllers.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts |  9 ---------
 arch/arm64/boot/dts/bitmain/bm1880.dtsi            | 12 ++++++++++++
 2 files changed, 12 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
index 3e8c70778e24..7a2c7f9c2660 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
+++ b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
@@ -49,12 +49,6 @@
 		reg = <0x1 0x00000000 0x0 0x40000000>; // 1GB
 	};
 
-	uart_clk: uart-clk {
-		compatible = "fixed-clock";
-		clock-frequency = <500000000>;
-		#clock-cells = <0>;
-	};
-
 	soc {
 		gpio0: gpio@50027000 {
 			porta: gpio-controller@0 {
@@ -173,21 +167,18 @@
 
 &uart0 {
 	status = "okay";
-	clocks = <&uart_clk>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart0_default>;
 };
 
 &uart1 {
 	status = "okay";
-	clocks = <&uart_clk>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1_default>;
 };
 
 &uart2 {
 	status = "okay";
-	clocks = <&uart_clk>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2_default>;
 };
diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
index 8471662413da..fa6e6905f588 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi
+++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
@@ -174,6 +174,9 @@
 		uart0: serial@58018000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x58018000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
@@ -184,6 +187,9 @@
 		uart1: serial@5801A000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x5801a000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
@@ -194,6 +200,9 @@
 		uart2: serial@5801C000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x5801c000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
@@ -204,6 +213,9 @@
 		uart3: serial@5801E000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x5801e000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-17 18:36 [PATCH v2 0/7] Add Bitmain BM1880 clock driver Manivannan Sadhasivam
2019-08-17 18:36 ` [PATCH v2 1/7] dt-bindings: clock: Add devicetree binding for BM1880 SoC Manivannan Sadhasivam
2019-08-17 18:36 ` [PATCH v2 2/7] arm64: dts: bitmain: Add clock controller support " Manivannan Sadhasivam
2019-08-17 18:36 ` Manivannan Sadhasivam [this message]
2019-08-17 18:36 ` [PATCH v2 4/7] clk: Add common clock driver " Manivannan Sadhasivam
2019-08-17 18:36 ` [PATCH v2 5/7] MAINTAINERS: Add entry for BM1880 SoC clock driver Manivannan Sadhasivam
2019-08-17 18:36 ` [PATCH v2 6/7] clk: Warn if clk_init_data is not zero initialized Manivannan Sadhasivam
2019-08-17 18:36 ` [PATCH v2 7/7] clk: Zero init clk_init_data in helpers Manivannan Sadhasivam

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190817183614.8429-4-manivannan.sadhasivam@linaro.org \
    --to=manivannan.sadhasivam@linaro.org \
    --cc=alec.lin@bitmain.com \
    --cc=darren.tsao@bitmain.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fisher.cheng@bitmain.com \
    --cc=haitao.suo@bitmain.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git