Re: [PATCH RFC] dt-bindings: regulator: define a mux regulator

["Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>]

Hello Rob,

On Tue, Aug 20, 2019 at 11:39:27AM -0500, Rob Herring wrote:
> On Tue, Aug 20, 2019 at 10:25 AM Uwe Kleine-König
> <u.kleine-koenig@pengutronix.de> wrote:
> >
> > A mux regulator is used to provide current on one of several outputs. It
> > might look as follows:
> >
> >       ,------------.
> >     --<OUT0     A0 <--
> >     --<OUT1     A1 <--
> >     --<OUT2     A2 <--
> >     --<OUT3        |
> >     --<OUT4     EN <--
> >     --<OUT5        |
> >     --<OUT6     IN <--
> >     --<OUT7        |
> >       `------------'
> >
> > Depending on which address is encoded on the three address inputs A0, A1
> > and A2 the current provided on IN is provided on one of the eight
> > outputs.
> >
> > What is new here is that the binding makes use of a #regulator-cells
> > property. This uses the approach known from other bindings (e.g. gpio)
> > to allow referencing all eight outputs with phandle arguments. This
> > requires an extention in of_get_regulator to use a new variant of
> > of_parse_phandle_with_args that has a cell_count_default parameter that
> > is used in absence of a $cell_name property. Even if we'd choose to
> > update all regulator-bindings to add #regulator-cells = <0>; we still
> > needed something to implement compatibility to the currently defined
> > bindings.
> >
> > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> > ---
> > Hello,
> >
> > the obvious alternative is to add (here) eight subnodes to represent the
> > eight outputs. This is IMHO less pretty, but wouldn't need to introduce
> > #regulator-cells.
> 
> I'm okay with #regulator-cells approach.

OK, then I will look into that in more detail; unless the regulator guys
don't agree with this approach of course.

> > Apart from reg = <..> and a phandle there is (I think) nothing that
> > needs to be specified in the subnodes because all properties of an
> > output (apart from the address) apply to all outputs.
> >
> > What do you think?
> >
> > Best regards
> > Uwe
> >
> >  .../bindings/regulator/mux-regulator.yaml     | 52 +++++++++++++++++++
> >  1 file changed, 52 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/regulator/mux-regulator.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/regulator/mux-regulator.yaml b/Documentation/devicetree/bindings/regulator/mux-regulator.yaml
> > new file mode 100644
> > index 000000000000..f06dbb969090
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/regulator/mux-regulator.yaml
> > @@ -0,0 +1,52 @@
> > +# SPDX-License-Identifier: GPL-2.0
> 
> (GPL-2.0-only OR BSD-2-Clause) is preferred.

OK.

> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/regulator/mux-regulator.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: MUX regulators
> > +
> > +properties:
> > +  compatible:
> > +    const: XXX,adb708
> 
> ? I assume you will split this into a common and specific schemas. I
> suppose there could be differing ways to control the mux just like all
> other muxes.

Not sure if a specific schema is necessary. I wrote XXX because I was
offline while I authored the binding and so couldn't determine the right
vendor to use.

> > +  enable-gpios:
> > +    maxItems: 1
> > +
> > +  address-gpios:
> > +    description: Array of typically three GPIO pins used to select the
> > +      regulator's output. The least significant address GPIO must be listed
> > +      first. The others follow in order of significance.
> > +    minItems: 1
> > +
> > +  "#regulator-cells":
> 
> How is this not required?

It should. For the RFC patch I didn't took the time to iron all the
details. My main concern was/is how the binding should look like and if
an #regulator-cells with a default would be acceptable.
 
Best regards and thanks for your feedback,
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel