From: Joel Stanley <joel@jms.id.au>
To: Rob Herring <robh+dt@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
Olof Johansson <olof@lixom.net>
Cc: "Mark Rutland" <mark.rutland@arm.com>,
devicetree@vger.kernel.org,
"Ryan Chen" <ryan_chen@aspeedtech.com>,
linux-aspeed@lists.ozlabs.org, "Andrew Jeffery" <andrew@aj.id.au>,
"Cédric Le Goater" <clg@kaod.org>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/7] ARM: dts: aspeed: Add AST2600 and EVB
Date: Wed, 21 Aug 2019 15:25:28 +0930 [thread overview]
Message-ID: <20190821055530.8720-6-joel@jms.id.au> (raw)
In-Reply-To: <20190821055530.8720-1-joel@jms.id.au>
The AST2600 is a new SoC by ASPEED. It contains a dual core Cortex A7
CPU and shares many periperhals with the existing AST2400 and AST2500.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/aspeed-ast2600-evb.dts | 44 ++++
arch/arm/boot/dts/aspeed-g6.dtsi | 266 +++++++++++++++++++++++
3 files changed, 311 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-ast2600-evb.dts
create mode 100644 arch/arm/boot/dts/aspeed-g6.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 247e556de48e..2d8d29e5686d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1276,6 +1276,7 @@ dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2500-evb.dtb \
+ aspeed-ast2600-evb.dtb \
aspeed-bmc-arm-centriq2400-rep.dtb \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
aspeed-bmc-facebook-cmm.dtb \
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
new file mode 100644
index 000000000000..7f2528e084b5
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2019 IBM Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+
+/ {
+ model = "AST2600 EVB";
+ compatible = "aspeed,ast2600";
+
+ aliases {
+ serial4 = &uart5;
+ };
+
+ chosen {
+ bootargs = "console=ttyS4,115200n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+};
+
+&mdio1 {
+ status = "okay";
+
+ ethphy1: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+};
+
+&mac1 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ phy-handle = <ðphy1>;
+};
+
+&emmc {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
new file mode 100644
index 000000000000..9f9931541060
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/ast2600-clock.h>
+
+/ {
+ model = "Aspeed BMC";
+ compatible = "aspeed,ast2600";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&gic>;
+
+ aliases {
+ serial4 = &uart5;
+ };
+
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "aspeed,ast2600-smp";
+
+ cpu@f00 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0xf00>;
+ };
+
+ cpu@f01 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0xf01>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ clocks = <&syscon ASPEED_CLK_HPLL>;
+ arm,cpu-registers-not-fw-configured;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ ranges;
+
+ gic: interrupt-controller@40461000 {
+ compatible = "arm,cortex-a7-gic";
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ reg = <0x40461000 0x1000>,
+ <0x40462000 0x1000>,
+ <0x40464000 0x2000>,
+ <0x40466000 0x2000>;
+ };
+
+ mdio0: mdio@1e650000 {
+ compatible = "aspeed,ast2600-mdio";
+ reg = <0x1e650000 0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ mdio1: mdio@1e650008 {
+ compatible = "aspeed,ast2600-mdio";
+ reg = <0x1e650008 0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ mdio2: mdio@1e650010 {
+ compatible = "aspeed,ast2600-mdio";
+ reg = <0x1e650010 0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ mdio3: mdio@1e650018 {
+ compatible = "aspeed,ast2600-mdio";
+ reg = <0x1e650018 0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ mac0: ftgmac@1e660000 {
+ compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+ reg = <0x1e660000 0x180>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
+ status = "disabled";
+ };
+
+ mac1: ftgmac@1e680000 {
+ compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+ reg = <0x1e680000 0x180>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
+ status = "disabled";
+ };
+
+ mac2: ftgmac@1e670000 {
+ compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+ reg = <0x1e670000 0x180>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>;
+ status = "disabled";
+ };
+
+ mac3: ftgmac@1e690000 {
+ compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+ reg = <0x1e690000 0x180>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>;
+ status = "disabled";
+ };
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ syscon: syscon@1e6e2000 {
+ compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
+ reg = <0x1e6e2000 0x1000>;
+ ranges = <0 0x1e6e2000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+
+ pinctrl: pinctrl {
+ compatible = "aspeed,ast2600-pinctrl";
+ };
+
+ smp-memram@180 {
+ compatible = "aspeed,ast2600-smpmem";
+ reg = <0x180 0x40>;
+ };
+ };
+
+ rng: hwrng@1e6e2524 {
+ compatible = "timeriomem_rng";
+ reg = <0x1e6e2524 0x4>;
+ period = <1>;
+ quality = <100>;
+ };
+
+ rtc: rtc@1e781000 {
+ compatible = "aspeed,ast2600-rtc";
+ reg = <0x1e781000 0x18>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart5: serial@1e784000 {
+ compatible = "ns16550a";
+ reg = <0x1e784000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
+ no-loopback-test;
+ };
+
+ wdt1: watchdog@1e785000 {
+ compatible = "aspeed,ast2600-wdt";
+ reg = <0x1e785000 0x40>;
+ };
+
+ wdt2: watchdog@1e785040 {
+ compatible = "aspeed,ast2600-wdt";
+ reg = <0x1e785040 0x40>;
+ status = "disabled";
+ };
+
+ wdt3: watchdog@1e785080 {
+ compatible = "aspeed,ast2600-wdt";
+ reg = <0x1e785080 0x40>;
+ status = "disabled";
+ };
+
+ wdt4: watchdog@1e7850C0 {
+ compatible = "aspeed,ast2600-wdt";
+ reg = <0x1e7850C0 0x40>;
+ status = "disabled";
+ };
+
+ sdc: sdc@1e740000 {
+ compatible = "aspeed,ast2600-sd-controller";
+ reg = <0x1e740000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1e740000 0x10000>;
+ clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
+ status = "disabled";
+
+ sdhci0: sdhci@1e740100 {
+ compatible = "aspeed,ast2600-sdhci", "sdhci";
+ reg = <0x100 0x100>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ sdhci,auto-cmd12;
+ clocks = <&syscon ASPEED_CLK_SDIO>;
+ status = "disabled";
+ };
+
+ sdhci1: sdhci@1e740200 {
+ compatible = "aspeed,ast2600-sdhci", "sdhci";
+ reg = <0x200 0x100>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ sdhci,auto-cmd12;
+ clocks = <&syscon ASPEED_CLK_SDIO>;
+ status = "disabled";
+ };
+ };
+
+ emmc: sdc@1e750000 {
+ compatible = "aspeed,ast2600-sd-controller";
+ reg = <0x1e750000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1e750000 0x10000>;
+ clocks = <&syscon ASPEED_CLK_GATE_EMMCCLK>;
+ status = "disabled";
+
+ sdhci@1e750100 {
+ compatible = "aspeed,ast2600-sdhci";
+ reg = <0x100 0x100>;
+ sdhci,auto-cmd12;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_EMMC>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emmc_default>;
+ };
+ };
+ };
+ };
+};
+
+&pinctrl {
+ pinctrl_emmc_default: emmc_default {
+ function = "SD3";
+ groups = "SD3";
+ };
+};
--
2.23.0.rc1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-08-21 5:57 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-21 5:55 [PATCH 0/7] ARM: Add ASPEED AST2600 support Joel Stanley
2019-08-21 5:55 ` [PATCH 1/7] dt-bindings: arm: cpus: Add ASPEED SMP Joel Stanley
2019-08-21 16:23 ` Rob Herring
2019-08-22 2:08 ` Andrew Jeffery
2019-08-21 5:55 ` [PATCH 2/7] ARM: aspeed: Select timer in each SoC Joel Stanley
2019-08-22 1:27 ` Andrew Jeffery
2019-08-21 5:55 ` [PATCH 3/7] ARM: aspeed: Add ASPEED AST2600 architecture Joel Stanley
2019-08-22 1:28 ` Andrew Jeffery
2019-08-21 5:55 ` [PATCH 4/7] ARM: aspeed: Enable SMP boot Joel Stanley
2019-08-21 5:55 ` Joel Stanley [this message]
2019-08-22 1:58 ` [PATCH 5/7] ARM: dts: aspeed: Add AST2600 and EVB Andrew Jeffery
2019-08-21 5:55 ` [PATCH 6/7] ARM: configs: multi_v7: Add ASPEED G6 Joel Stanley
2019-08-22 2:04 ` Andrew Jeffery
2019-08-21 5:55 ` [PATCH 7/7] ARM: configs: aspeed_g5: Enable AST2600 Joel Stanley
2019-08-22 2:07 ` Andrew Jeffery
2019-08-22 4:43 ` Joel Stanley
2019-08-27 20:12 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190821055530.8720-6-joel@jms.id.au \
--to=joel@jms.id.au \
--cc=andrew@aj.id.au \
--cc=arnd@arndb.de \
--cc=clg@kaod.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=mark.rutland@arm.com \
--cc=olof@lixom.net \
--cc=robh+dt@kernel.org \
--cc=ryan_chen@aspeedtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).