Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Joel Stanley <joel@jms.id.au>
To: Rob Herring <robh+dt@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
	Olof Johansson <olof@lixom.net>
Cc: "Mark Rutland" <mark.rutland@arm.com>,
	devicetree@vger.kernel.org,
	"Ryan Chen" <ryan_chen@aspeedtech.com>,
	linux-aspeed@lists.ozlabs.org, "Andrew Jeffery" <andrew@aj.id.au>,
	"Cédric Le Goater" <clg@kaod.org>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/7] ARM: configs: multi_v7: Add ASPEED G6
Date: Wed, 21 Aug 2019 15:25:29 +0930
Message-ID: <20190821055530.8720-7-joel@jms.id.au> (raw)
In-Reply-To: <20190821055530.8720-1-joel@jms.id.au>

This adds the ASPEED AST2600 system and associated ASPEED devices so we
get build coverage.

The changes to the UART configuration to ensure the default console
(UART5) works.

Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 arch/arm/configs/multi_v7_defconfig | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 3dc02a5e7672..ebb00321b1eb 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -9,6 +9,8 @@ CONFIG_ARCH_VIRT=y
 CONFIG_ARCH_ALPINE=y
 CONFIG_ARCH_ARTPEC=y
 CONFIG_MACH_ARTPEC6=y
+CONFIG_ARCH_ASPEED=y
+CONFIG_MACH_ASPEED_G6=y
 CONFIG_ARCH_AT91=y
 CONFIG_SOC_SAMA5D2=y
 CONFIG_SOC_SAMA5D3=y
@@ -200,6 +202,7 @@ CONFIG_MTD_NAND_VF610_NFC=y
 CONFIG_MTD_NAND_DAVINCI=y
 CONFIG_MTD_NAND_STM32_FMC2=y
 CONFIG_MTD_SPI_NOR=y
+CONFIG_SPI_ASPEED_SMC=m
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
@@ -306,7 +309,11 @@ CONFIG_INPUT_STPMIC1_ONKEY=y
 CONFIG_SERIO_AMBAKMI=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=5
+CONFIG_SERIAL_8250_RUNTIME_UARTS=5
 CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_ASPEED_VUART=m
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_BCM2835AUX=y
 CONFIG_SERIAL_8250_DW=y
@@ -351,6 +358,8 @@ CONFIG_SERIAL_STM32=y
 CONFIG_SERIAL_STM32_CONSOLE=y
 CONFIG_SERIAL_DEV_BUS=y
 CONFIG_VIRTIO_CONSOLE=y
+CONFIG_ASPEED_KCS_IPMI_BMC=m
+CONFIG_ASPEED_BT_IPMI_BMC=m
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_ST=y
 CONFIG_TCG_TPM=m
@@ -360,6 +369,7 @@ CONFIG_I2C_ARB_GPIO_CHALLENGE=m
 CONFIG_I2C_MUX_PCA954x=y
 CONFIG_I2C_MUX_PINCTRL=y
 CONFIG_I2C_DEMUX_PINCTRL=y
+CONFIG_I2C_ASPEED=m
 CONFIG_I2C_AT91=m
 CONFIG_I2C_BCM2835=y
 CONFIG_I2C_CADENCE=y
@@ -464,6 +474,7 @@ CONFIG_CHARGER_MAX77693=m
 CONFIG_CHARGER_MAX8997=m
 CONFIG_CHARGER_MAX8998=m
 CONFIG_CHARGER_TPS65090=y
+CONFIG_SENSORS_ASPEED=m
 CONFIG_SENSORS_IIO_HWMON=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM95245=y
@@ -594,6 +605,7 @@ CONFIG_VIDEO_V4L2_SUBDEV_API=y
 CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_ASPEED=m
 CONFIG_VIDEO_STM32_DCMI=m
 CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m
 CONFIG_VIDEO_S5P_FIMC=m
@@ -663,6 +675,7 @@ CONFIG_DRM_MXSFB=m
 CONFIG_DRM_PL111=m
 CONFIG_DRM_LIMA=m
 CONFIG_DRM_PANFROST=m
+CONFIG_DRM_ASPEED_GFX=m
 CONFIG_FB_EFI=y
 CONFIG_FB_WM8505=y
 CONFIG_FB_SH_MOBILE_LCDC=y
@@ -762,6 +775,7 @@ CONFIG_USB_MXS_PHY=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_FSL_USB2=y
 CONFIG_USB_RENESAS_USBHS_UDC=m
+CONFIG_USB_ASPEED_VHUB=m
 CONFIG_USB_CONFIGFS=m
 CONFIG_USB_CONFIGFS_SERIAL=y
 CONFIG_USB_CONFIGFS_ACM=y
@@ -870,6 +884,7 @@ CONFIG_RTC_DRV_TEGRA=y
 CONFIG_RTC_DRV_ST_LPC=y
 CONFIG_RTC_DRV_STM32=y
 CONFIG_RTC_DRV_CPCAP=m
+CONFIG_RTC_DRV_ASPEED=m
 CONFIG_DMADEVICES=y
 CONFIG_AT_HDMAC=y
 CONFIG_AT_XDMAC=y
@@ -920,6 +935,9 @@ CONFIG_TEGRA_IOMMU_SMMU=y
 CONFIG_REMOTEPROC=m
 CONFIG_ST_REMOTEPROC=m
 CONFIG_RPMSG_VIRTIO=m
+CONFIG_ASPEED_LPC_CTRL=m
+CONFIG_ASPEED_LPC_SNOOP=m
+CONFIG_ASPEED_P2A_CTRL=m
 CONFIG_RASPBERRYPI_POWER=y
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_PM=y
@@ -952,6 +970,7 @@ CONFIG_ARM_TEGRA_DEVFREQ=m
 CONFIG_TI_AEMIF=y
 CONFIG_IIO=y
 CONFIG_IIO_SW_TRIGGER=y
+CONFIG_ASPEED_ADC=m
 CONFIG_AT91_ADC=m
 CONFIG_AT91_SAMA5D2_ADC=m
 CONFIG_BERLIN2_ADC=m
-- 
2.23.0.rc1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply index

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-21  5:55 [PATCH 0/7] ARM: Add ASPEED AST2600 support Joel Stanley
2019-08-21  5:55 ` [PATCH 1/7] dt-bindings: arm: cpus: Add ASPEED SMP Joel Stanley
2019-08-21 16:23   ` Rob Herring
2019-08-22  2:08   ` Andrew Jeffery
2019-08-21  5:55 ` [PATCH 2/7] ARM: aspeed: Select timer in each SoC Joel Stanley
2019-08-22  1:27   ` Andrew Jeffery
2019-08-21  5:55 ` [PATCH 3/7] ARM: aspeed: Add ASPEED AST2600 architecture Joel Stanley
2019-08-22  1:28   ` Andrew Jeffery
2019-08-21  5:55 ` [PATCH 4/7] ARM: aspeed: Enable SMP boot Joel Stanley
2019-08-21  5:55 ` [PATCH 5/7] ARM: dts: aspeed: Add AST2600 and EVB Joel Stanley
2019-08-22  1:58   ` Andrew Jeffery
2019-08-21  5:55 ` Joel Stanley [this message]
2019-08-22  2:04   ` [PATCH 6/7] ARM: configs: multi_v7: Add ASPEED G6 Andrew Jeffery
2019-08-21  5:55 ` [PATCH 7/7] ARM: configs: aspeed_g5: Enable AST2600 Joel Stanley
2019-08-22  2:07   ` Andrew Jeffery
2019-08-22  4:43     ` Joel Stanley
2019-08-27 20:12       ` Arnd Bergmann

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190821055530.8720-7-joel@jms.id.au \
    --to=joel@jms.id.au \
    --cc=andrew@aj.id.au \
    --cc=arnd@arndb.de \
    --cc=clg@kaod.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=mark.rutland@arm.com \
    --cc=olof@lixom.net \
    --cc=robh+dt@kernel.org \
    --cc=ryan_chen@aspeedtech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git