From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com
Cc: devicetree@vger.kernel.org,
Neil Armstrong <narmstrong@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 14/14] arm64: dts: meson: fix boards regulators states format
Date: Wed, 21 Aug 2019 16:20:43 +0200 [thread overview]
Message-ID: <20190821142043.14649-15-narmstrong@baylibre.com> (raw)
In-Reply-To: <20190821142043.14649-1-narmstrong@baylibre.com>
This fixes the following DT schemas check errors:
meson-gxbb-odroidc2.dt.yaml: gpio-regulator-tf_io: states:0: Additional items are not allowed (1800000, 1 were unexpected)
meson-gxbb-odroidc2.dt.yaml: gpio-regulator-tf_io: states:0: [3300000, 0, 1800000, 1] is too long
meson-gxbb-nexbox-a95x.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected)
meson-gxbb-nexbox-a95x.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long
meson-gxbb-p200.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected)
meson-gxbb-p200.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long
meson-gxl-s905x-hwacom-amazetv.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected)
meson-gxl-s905x-hwacom-amazetv.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long
meson-gxbb-p201.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected)
meson-gxbb-p201.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long
meson-g12b-odroid-n2.dt.yaml: gpio-regulator-tf_io: states:0: Additional items are not allowed (1800000, 1 were unexpected)
meson-g12b-odroid-n2.dt.yaml: gpio-regulator-tf_io: states:0: [3300000, 0, 1800000, 1] is too long
meson-gxl-s905x-nexbox-a95x.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected)
meson-gxl-s905x-nexbox-a95x.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts | 4 ++--
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 4 ++--
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 4 ++--
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 4 ++--
.../arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 4 ++--
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts | 4 ++--
6 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
index 81780ffcc7f0..dc35e2982c71 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
@@ -65,8 +65,8 @@
gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
gpios-states = <0>;
- states = <3300000 0
- 1800000 1>;
+ states = <3300000 0>,
+ <1800000 1>;
};
flash_1v8: regulator-flash_1v8 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
index b636912a2715..afcf8a9f667b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
@@ -75,8 +75,8 @@
gpios-states = <1>;
/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
- states = <1800000 0
- 3300000 1>;
+ states = <1800000 0>,
+ <3300000 1>;
};
vddio_boot: regulator-vddio_boot {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 9972b1515da6..6039adda12ee 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -77,8 +77,8 @@
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
gpios-states = <0>;
- states = <3300000 0
- 1800000 1>;
+ states = <3300000 0>,
+ <1800000 1>;
};
vcc1v8: regulator-vcc1v8 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
index e8f925871edf..89f7b41b0e9e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
@@ -46,8 +46,8 @@
gpios-states = <1>;
/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
- states = <1800000 0
- 3300000 1>;
+ states = <1800000 0>,
+ <3300000 1>;
regulator-settling-time-up-us = <10000>;
regulator-settling-time-down-us = <150000>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
index 796baea7a0bf..c8d74e61dec1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
@@ -38,8 +38,8 @@
gpios-states = <1>;
/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
- states = <1800000 0
- 3300000 1>;
+ states = <1800000 0>,
+ <3300000 1>;
};
vddio_boot: regulator-vddio_boot {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
index 26907ac82930..c433a031841f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
@@ -38,8 +38,8 @@
gpios-states = <1>;
/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
- states = <1800000 0
- 3300000 1>;
+ states = <1800000 0>,
+ <3300000 1>;
};
vddio_boot: regulator-vddio_boot {
--
2.22.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-08-21 14:25 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-21 14:20 [PATCH v2 00/14] arm64: dts: meson: fixes following YAML bindings schemas conversion Neil Armstrong
2019-08-21 14:20 ` [PATCH v2 01/14] arm64: dts: meson: fix ethernet mac reg format Neil Armstrong
2019-08-21 14:20 ` [PATCH v2 02/14] arm64: dts: meson-gx: drop the vpu dmc memory cell Neil Armstrong
2019-08-21 14:20 ` [PATCH v2 03/14] arm64: dts: meson-gx: fix reset controller compatible Neil Armstrong
2019-08-21 14:20 ` [PATCH v2 04/14] arm64: dts: meson-gx: fix spifc compatible Neil Armstrong
2019-08-21 14:20 ` [PATCH v2 05/14] arm64: dts: meson-gx: fix watchdog compatible Neil Armstrong
2019-08-21 14:20 ` [PATCH v2 06/14] arm64: dts: meson-gx: fix mhu compatible Neil Armstrong
2019-08-21 14:20 ` [PATCH v2 07/14] arm64: dts: meson-gx: fix periphs bus node name Neil Armstrong
2019-08-21 14:20 ` [PATCH v2 08/14] arm64: dts: meson-gxl: fix internal phy compatible Neil Armstrong
2019-08-21 21:16 ` Martin Blumenstingl
2019-08-21 14:20 ` [PATCH v2 09/14] arm64: dts: meson-axg: fix MHU compatible Neil Armstrong
2019-08-21 14:20 ` [PATCH v2 10/14] arm64: dts: meson-g12a: fix reset controller compatible Neil Armstrong
2019-08-21 14:20 ` [PATCH v2 11/14] arm64: dts: meson-g12a-x96-max: fix compatible Neil Armstrong
2019-08-21 14:20 ` [PATCH v2 12/14] arm64: dts: meson-gxbb-nanopi-k2: add missing model Neil Armstrong
2019-08-21 21:15 ` Martin Blumenstingl
2019-08-21 14:20 ` [PATCH v2 13/14] arm64: dts: meson-gxbb-p201: fix snps, reset-delays-us format Neil Armstrong
2019-08-21 14:20 ` Neil Armstrong [this message]
2019-08-22 22:26 ` [PATCH v2 00/14] arm64: dts: meson: fixes following YAML bindings schemas conversion Kevin Hilman
2019-08-23 6:53 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190821142043.14649-15-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).