Linux-ARM-Kernel Archive on
 help / color / Atom feed
From: Andrew Lunn <>
To: Andrey Smirnov <>
Cc: Shawn Guo <>, Chris Healy <>,
	Fabio Estevam <>,,
Subject: Re: [PATCH v2] ARM: dts: vf610-zii-cfu1: Slow I2C0 down to 100 kHz
Date: Wed, 21 Aug 2019 17:44:55 +0200
Message-ID: <> (raw)
In-Reply-To: <>

On Tue, Aug 20, 2019 at 06:39:36PM -0700, Andrey Smirnov wrote:
> Fiber-optic modules attached to the bus are only rated to work at
> 100 kHz, so decrease the bus frequency to accommodate that.
> Signed-off-by: Andrey Smirnov <>
> Cc: Shawn Guo <>
> Cc: Chris Healy <>
> Cc: Fabio Estevam <>
> Cc:
> Cc:

Reviewed-by: Andrew Lunn <>

I took a quick look at some of the SFP standards. 100KHz is part of
the standard. So we should try to remember to keep an eye of this as
other boards are merged.


linux-arm-kernel mailing list

  reply index

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-21  1:39 Andrey Smirnov
2019-08-21 15:44 ` Andrew Lunn [this message]
2019-08-24 19:25 ` Shawn Guo

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on

Archives are clonable:
	git clone --mirror linux-arm-kernel/git/0.git
	git clone --mirror linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ \
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone