Linux-ARM-Kernel Archive on
 help / color / Atom feed
From: Shawn Guo <>
To: Andrey Smirnov <>
Cc: Fabio Estevam <>,
	Chris Healy <>,,
Subject: Re: [PATCH v2] ARM: dts: vf610-zii-cfu1: Slow I2C0 down to 100 kHz
Date: Sat, 24 Aug 2019 21:25:05 +0200
Message-ID: <> (raw)
In-Reply-To: <>

On Tue, Aug 20, 2019 at 06:39:36PM -0700, Andrey Smirnov wrote:
> Fiber-optic modules attached to the bus are only rated to work at
> 100 kHz, so decrease the bus frequency to accommodate that.
> Signed-off-by: Andrey Smirnov <>
> Cc: Shawn Guo <>
> Cc: Chris Healy <>
> Cc: Fabio Estevam <>
> Cc:
> Cc:

Applied, thanks.

linux-arm-kernel mailing list

      parent reply index

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-21  1:39 Andrey Smirnov
2019-08-21 15:44 ` Andrew Lunn
2019-08-24 19:25 ` Shawn Guo [this message]

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on

Archives are clonable:
	git clone --mirror linux-arm-kernel/git/0.git
	git clone --mirror linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ \
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone