From: Tero Kristo <t-kristo@ti.com>
To: <linux-omap@vger.kernel.org>, <tony@atomide.com>
Cc: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 07/10] ARM: dts: dra7: convert IOMMUs to use ti-sysc
Date: Wed, 28 Aug 2019 10:56:41 +0300 [thread overview]
Message-ID: <20190828075644.4493-8-t-kristo@ti.com> (raw)
In-Reply-To: <20190828075644.4493-1-t-kristo@ti.com>
Convert dra7 IOMMUs to use ti-sysc instead of legacy omap-hwmod based
implementation. Enable the IOMMUs also while doing this.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/boot/dts/dra7.dtsi | 140 +++++++++++++++++++++++++++---------
1 file changed, 108 insertions(+), 32 deletions(-)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 95147289be9c..98c01f204a1a 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -377,44 +377,120 @@
ti,hwmods = "dmm";
};
- mmu0_dsp1: mmu@40d01000 {
- compatible = "ti,dra7-dsp-iommu";
- reg = <0x40d01000 0x100>;
- interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu0_dsp1";
- #iommu-cells = <0>;
- ti,syscon-mmuconfig = <&dsp1_system 0x0>;
- status = "disabled";
+ target-module@40d01000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x40d01000 0x4>,
+ <0x40d01010 0x4>,
+ <0x40d01014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_dsp1 1>;
+ reset-names = "rstctrl";
+ ranges = <0x0 0x40d01000 0x1000>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ mmu0_dsp1: mmu@0 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp1_system 0x0>;
+ };
};
- mmu1_dsp1: mmu@40d02000 {
- compatible = "ti,dra7-dsp-iommu";
- reg = <0x40d02000 0x100>;
- interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu1_dsp1";
- #iommu-cells = <0>;
- ti,syscon-mmuconfig = <&dsp1_system 0x1>;
- status = "disabled";
+ target-module@40d02000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x40d02000 0x4>,
+ <0x40d02010 0x4>,
+ <0x40d02014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_dsp1 1>;
+ reset-names = "rstctrl";
+ ranges = <0x0 0x40d02000 0x1000>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ mmu1_dsp1: mmu@0 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp1_system 0x1>;
+ };
};
- mmu_ipu1: mmu@58882000 {
- compatible = "ti,dra7-iommu";
- reg = <0x58882000 0x100>;
- interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu_ipu1";
- #iommu-cells = <0>;
- ti,iommu-bus-err-back;
- status = "disabled";
+ target-module@58882000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x58882000 0x4>,
+ <0x58882010 0x4>,
+ <0x58882014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_ipu 2>;
+ reset-names = "rstctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x58882000 0x100>;
+
+ mmu_ipu1: mmu@0 {
+ compatible = "ti,dra7-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,iommu-bus-err-back;
+ };
};
- mmu_ipu2: mmu@55082000 {
- compatible = "ti,dra7-iommu";
- reg = <0x55082000 0x100>;
- interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu_ipu2";
- #iommu-cells = <0>;
- ti,iommu-bus-err-back;
- status = "disabled";
+ target-module@55082000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x55082000 0x4>,
+ <0x55082010 0x4>,
+ <0x55082014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&ipu2_clkctrl DRA7_IPU2_MMU_IPU2_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_core 2>;
+ reset-names = "rstctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x55082000 0x100>;
+
+ mmu_ipu2: mmu@0 {
+ compatible = "ti,dra7-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,iommu-bus-err-back;
+ };
};
abb_mpu: regulator-abb-mpu {
--
2.17.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-08-28 7:59 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-28 7:56 [PATCH 00/10] ARM: dts: omap changes for IOMMU / reset support Tero Kristo
2019-08-28 7:56 ` [PATCH 01/10] ARM: dts: omap5: add IVA clkctrl nodes Tero Kristo
2019-08-28 7:56 ` [PATCH 02/10] ARM: dts: dra7: add PRM nodes Tero Kristo
2019-08-28 7:56 ` [PATCH 03/10] ARM: dts: omap4: " Tero Kristo
2019-08-28 7:56 ` [PATCH 04/10] ARM: dts: am33xx: Add PRM data Tero Kristo
2019-08-28 7:56 ` [PATCH 05/10] ARM: dts: am43xx: " Tero Kristo
2019-08-28 7:56 ` [PATCH 06/10] ARM: dts: omap5: " Tero Kristo
2019-08-28 7:56 ` Tero Kristo [this message]
2019-08-28 7:56 ` [PATCH 08/10] ARM: dts: dra74x: convert IOMMUs to use ti-sysc Tero Kristo
2019-08-28 7:56 ` [PATCH 09/10] ARM: dts: omap4: " Tero Kristo
2019-08-28 7:56 ` [PATCH 10/10] ARM: dts: omap5: " Tero Kristo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190828075644.4493-8-t-kristo@ti.com \
--to=t-kristo@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).