Linux-ARM-Kernel Archive on
 help / color / Atom feed
From: Stephen Boyd <>
To: Prakhar Srivastava <>,,
Subject: Re: [RFC][PATCH v1 0/1] Add support for arm64 to carry ima measurement log in kexec_file_load
Date: Fri, 06 Sep 2019 20:56:54 -0700
Message-ID: <> (raw)
In-Reply-To: <>

Quoting Prakhar Srivastava (2019-09-06 16:51:09)
> Add support for arm64 to carry ima measurement log
> to the next kexec'ed session triggered via kexec_file_load.
> - Top of Linux 5.3-rc6
> Currently during kexec the kernel file signatures are/can be validated
> prior to actual load, the information(PE/ima signature) is not carried
> to the next session. This lead to loss of information.
> Carrying forward the ima measurement log to the next kexec'ed session.
> This allows a verifying party to get the entire runtime event log since
> the last full reboot since that is when PCRs were last reset.
> Prakhar Srivastava (1):
>   Add support for arm64 to carry ima measurement log in kexec_file_load

Did anything change from the last round? Please include changelogs so we
know what to look for.

linux-arm-kernel mailing list

  parent reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-06 23:51 Prakhar Srivastava
2019-09-06 23:51 ` [RFC][PATCH v1 1/1] " Prakhar Srivastava
2019-09-07  3:56 ` Stephen Boyd [this message]
2019-09-09 23:14 [RFC PATCH v1 0/1] " Prakhar Srivastava
2019-09-13 22:50 Prakhar Srivastava

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on

Archives are clonable:
	git clone --mirror linux-arm-kernel/git/0.git
	git clone --mirror linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ \
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone public-inbox