Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: Maxime Ripard <maxime.ripard@anandra.org>
Cc: herbert@gondor.apana.org.au, linux-sunxi@googlegroups.com,
	linux-kernel@vger.kernel.org, Maxime Ripard <mripard@kernel.org>,
	Chen-Yu Tsai <wens@csie.org>,
	linux-crypto@vger.kernel.org, davem@davemloft.net,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 2/2] crypto: sun4i-ss: enable pm_runtime
Date: Thu, 12 Sep 2019 10:49:07 +0200
Message-ID: <20190912084907.GA26551@Red> (raw)
In-Reply-To: <CAO4ZVTM99FksM71BAiraYj7eyREO1Qi=L1NFzEkNmMgBmphBww@mail.gmail.com>

On Thu, Sep 12, 2019 at 08:35:51AM +0200, Maxime Ripard wrote:
> Hi,
> 
> Le mer. 11 sept. 2019 à 13:46, Corentin Labbe
> <clabbe.montjoie@gmail.com> a écrit :
> >
> > This patch enables power management on the Security System.
> >
> > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> > ---
> >  drivers/crypto/sunxi-ss/sun4i-ss-cipher.c |  5 +++
> >  drivers/crypto/sunxi-ss/sun4i-ss-core.c   | 42 ++++++++++++++++++++++-
> >  2 files changed, 46 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c b/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c
> > index fa4b1b47822e..1fedec9e83b0 100644
> > --- a/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c
> > +++ b/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c
> > @@ -10,6 +10,8 @@
> >   *
> >   * You could find the datasheet in Documentation/arm/sunxi.rst
> >   */
> > +
> > +#include <linux/pm_runtime.h>
> >  #include "sun4i-ss.h"
> >
> >  static int noinline_for_stack sun4i_ss_opti_poll(struct skcipher_request *areq)
> > @@ -497,13 +499,16 @@ int sun4i_ss_cipher_init(struct crypto_tfm *tfm)
> >                 return PTR_ERR(op->fallback_tfm);
> >         }
> >
> > +       pm_runtime_get_sync(op->ss->dev);
> >         return 0;
> >  }
> >
> >  void sun4i_ss_cipher_exit(struct crypto_tfm *tfm)
> >  {
> >         struct sun4i_tfm_ctx *op = crypto_tfm_ctx(tfm);
> > +
> >         crypto_free_sync_skcipher(op->fallback_tfm);
> > +       pm_runtime_put_sync(op->ss->dev);
> >  }
> >
> >  /* check and set the AES key, prepare the mode to be used */
> > diff --git a/drivers/crypto/sunxi-ss/sun4i-ss-core.c b/drivers/crypto/sunxi-ss/sun4i-ss-core.c
> > index 2c9ff01dddfc..5e6e1a308f60 100644
> > --- a/drivers/crypto/sunxi-ss/sun4i-ss-core.c
> > +++ b/drivers/crypto/sunxi-ss/sun4i-ss-core.c
> > @@ -14,6 +14,7 @@
> >  #include <linux/module.h>
> >  #include <linux/of.h>
> >  #include <linux/platform_device.h>
> > +#include <linux/pm_runtime.h>
> >  #include <crypto/scatterwalk.h>
> >  #include <linux/scatterlist.h>
> >  #include <linux/interrupt.h>
> > @@ -258,6 +259,37 @@ static int sun4i_ss_enable(struct sun4i_ss_ctx *ss)
> >         return err;
> >  }
> >
> > +#ifdef CONFIG_PM
> > +static int sun4i_ss_pm_suspend(struct device *dev)
> > +{
> > +       struct sun4i_ss_ctx *ss = dev_get_drvdata(dev);
> > +
> > +       sun4i_ss_disable(ss);
> > +       return 0;
> > +}
> > +
> > +static int sun4i_ss_pm_resume(struct device *dev)
> > +{
> > +       struct sun4i_ss_ctx *ss = dev_get_drvdata(dev);
> > +
> > +       return sun4i_ss_enable(ss);
> > +}
> > +#endif
> > +
> > +const struct dev_pm_ops sun4i_ss_pm_ops = {
> > +       SET_RUNTIME_PM_OPS(sun4i_ss_pm_suspend, sun4i_ss_pm_resume, NULL)
> > +};
> > +
> > +static void sun4i_ss_pm_init(struct sun4i_ss_ctx *ss)
> > +{
> > +       pm_runtime_use_autosuspend(ss->dev);
> > +       pm_runtime_set_autosuspend_delay(ss->dev, 1000);
> > +
> > +       pm_runtime_get_noresume(ss->dev);
> > +       pm_runtime_set_active(ss->dev);
> > +       pm_runtime_enable(ss->dev);
> > +}
> 
> It's not really clear to me what you're doing here? Can you explain?
> 

I set the autosuspend state and delay.

I say that the device is active and so I "get" it.
Then I enable PM.

I do like that since I use the device later in probe(), so I need to keep it up.
At the end of probe() I put the device which go in suspend automaticaly after.

Regards

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

      reply index

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-11 11:46 [PATCH 0/2] crypto: sun4i-ss: Enable power management Corentin Labbe
2019-09-11 11:46 ` [PATCH 1/2] crypto: sun4i-ss: simplify enable/disable of the device Corentin Labbe
2019-09-12  6:32   ` Maxime Ripard
2019-09-11 11:46 ` [PATCH 2/2] crypto: sun4i-ss: enable pm_runtime Corentin Labbe
2019-09-12  6:35   ` Maxime Ripard
2019-09-12  8:49     ` Corentin Labbe [this message]

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190912084907.GA26551@Red \
    --to=clabbe.montjoie@gmail.com \
    --cc=davem@davemloft.net \
    --cc=herbert@gondor.apana.org.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=maxime.ripard@anandra.org \
    --cc=mripard@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org infradead-linux-arm-kernel@archiver.kernel.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox