From: Jagan Teki <jagan@amarulasolutions.com>
To: Heiko Stuebner <heiko@sntech.de>, Levin Du <djw@t-chip.com.cn>,
Akash Gajjar <akash@openedev.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-rockchip@lists.infradead.org,
Jagan Teki <jagan@amarulasolutions.com>,
Da Xue <da@lessconfused.com>,
linux-amarula@amarulasolutions.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/6] arm64: dts: rockchip: Fix roc-rk3399-pc regulator input rails
Date: Thu, 19 Sep 2019 10:58:22 +0530 [thread overview]
Message-ID: <20190919052822.10403-7-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20190919052822.10403-1-jagan@amarulasolutions.com>
Few, know rk808 pmic regulators VCC[1-4], VCC[6-7], VCC[9-11],
VDD_LOG, VDD_GPU, VDD_CPU_B, VCC3V3_SYS are inputting with vcc_sys
which is 5V power rail from dc_12v.
So, replace the vin-supply of above mentioned regulators
with vcc_sys as per the PMIC-RK808-D page of roc-rk3399-pc
schematics.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
.../rk3399-libretech-roc-rk3399-pc.dts | 26 +++++++++----------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-libretech-roc-rk3399-pc.dts b/arch/arm64/boot/dts/rockchip/rk3399-libretech-roc-rk3399-pc.dts
index 51242ea5447d..1eddb2e00809 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-libretech-roc-rk3399-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-libretech-roc-rk3399-pc.dts
@@ -85,7 +85,7 @@
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- vin-supply = <&dc_12v>;
+ vin-supply = <&vcc_sys>;
};
/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
@@ -129,7 +129,7 @@
regulator-boot-on;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
- vin-supply = <&vcc3v3_sys>;
+ vin-supply = <&vcc_sys>;
};
};
@@ -202,16 +202,16 @@
rockchip,system-power-controller;
wakeup-source;
- vcc1-supply = <&vcc3v3_sys>;
- vcc2-supply = <&vcc3v3_sys>;
- vcc3-supply = <&vcc3v3_sys>;
- vcc4-supply = <&vcc3v3_sys>;
- vcc6-supply = <&vcc3v3_sys>;
- vcc7-supply = <&vcc3v3_sys>;
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc3v3_sys>;
- vcc10-supply = <&vcc3v3_sys>;
- vcc11-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc_sys>;
+ vcc10-supply = <&vcc_sys>;
+ vcc11-supply = <&vcc_sys>;
vcc12-supply = <&vcc3v3_sys>;
vddio-supply = <&vcc1v8_pmu>;
@@ -385,7 +385,7 @@
regulator-ramp-delay = <1000>;
regulator-always-on;
regulator-boot-on;
- vin-supply = <&vcc3v3_sys>;
+ vin-supply = <&vcc_sys>;
regulator-state-mem {
regulator-off-in-suspend;
@@ -404,7 +404,7 @@
regulator-ramp-delay = <1000>;
regulator-always-on;
regulator-boot-on;
- vin-supply = <&vcc3v3_sys>;
+ vin-supply = <&vcc_sys>;
regulator-state-mem {
regulator-off-in-suspend;
--
2.18.0.321.gffc6fa0e3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-09-19 5:30 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-19 5:28 [PATCH 0/6] arm64: dts: rockchip: ROC-PC fixes Jagan Teki
2019-09-19 5:28 ` [PATCH 1/6] arm64: dts: rockchip: Fix rk3399-roc-pc pwm2 pin Jagan Teki
2019-09-29 21:21 ` Heiko Stuebner
2019-10-01 10:26 ` Jagan Teki
2019-10-01 10:34 ` Michael Nazzareno Trimarchi
2019-10-08 3:11 ` djw
2019-10-16 17:09 ` Jagan Teki
2019-10-17 13:26 ` Markus Reichl
2019-10-17 13:49 ` Jagan Teki
2019-10-17 23:33 ` Heiko Stuebner
2019-10-22 6:19 ` djw
2019-09-19 5:28 ` [PATCH 2/6] dt-bindings: arm: rockchip: Use libretech for roc-pc binding Jagan Teki
2019-09-19 5:28 ` [PATCH 3/6] arm64: dts: rockchip: Use libretech model, compatible for ROC-PC Jagan Teki
2019-09-19 5:28 ` [PATCH 4/6] arm64: dts: rockchip: Rename roc-pc with libretech notation Jagan Teki
2019-09-29 21:32 ` Heiko Stuebner
2019-10-01 10:33 ` Jagan Teki
2019-10-01 11:01 ` Chen-Yu Tsai
2019-09-19 5:28 ` [PATCH 5/6] arm64: dts: rockchip: Rename vcc12v_sys into dc_12v for roc-rk3399-pc Jagan Teki
2019-10-03 22:49 ` Heiko Stuebner
2019-09-19 5:28 ` Jagan Teki [this message]
2019-10-03 22:50 ` [PATCH 6/6] arm64: dts: rockchip: Fix roc-rk3399-pc regulator input rails Heiko Stuebner
2019-10-16 17:11 ` [PATCH 0/6] arm64: dts: rockchip: ROC-PC fixes Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190919052822.10403-7-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=akash@openedev.com \
--cc=da@lessconfused.com \
--cc=devicetree@vger.kernel.org \
--cc=djw@t-chip.com.cn \
--cc=heiko@sntech.de \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).