From: Fabien Parent <fparent@baylibre.com>
To: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Cc: matthias.bgg@gmail.com, Fabien Parent <fparent@baylibre.com>,
tglx@linutronix.de, daniel.lezcano@linaro.org
Subject: [PATCH] clocksource: mediatek: fix error handling
Date: Thu, 19 Sep 2019 21:13:15 +0200 [thread overview]
Message-ID: <20190919191315.25190-1-fparent@baylibre.com> (raw)
When timer_of_init fails, it cleans up after itself by undoing
everything it did during the initialization function.
mtk_syst_init and mtk_gpt_init both call timer_of_cleanup if
timer_of_init fails. timer_of_cleanup try to release the resource taken.
Since these resources have already been cleaned up by timer_of_init,
we end up getting a few warnings printed:
[ 0.001935] WARNING: CPU: 0 PID: 0 at __clk_put+0xe8/0x128
[ 0.002650] Modules linked in:
[ 0.003058] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.67+ #1
[ 0.003852] Hardware name: MediaTek MT8183 (DT)
[ 0.004446] pstate: 20400085 (nzCv daIf +PAN -UAO)
[ 0.005073] pc : __clk_put+0xe8/0x128
[ 0.005555] lr : clk_put+0xc/0x14
[ 0.005988] sp : ffffff80090b3ea0
[ 0.006422] x29: ffffff80090b3ea0 x28: 0000000040e20018
[ 0.007121] x27: ffffffc07bfff780 x26: 0000000000000001
[ 0.007819] x25: ffffff80090bda80 x24: ffffff8008ec5828
[ 0.008517] x23: ffffff80090bd000 x22: ffffff8008d8b2e8
[ 0.009216] x21: 0000000000000001 x20: fffffffffffffdfb
[ 0.009914] x19: ffffff8009166180 x18: 00000000002bffa8
[ 0.010612] x17: ffffffc012996980 x16: 0000000000000000
[ 0.011311] x15: ffffffbf004a6800 x14: 3536343038393334
[ 0.012009] x13: 2079726576652073 x12: 7eb9c62c5c38f100
[ 0.012707] x11: ffffff80090b3ba0 x10: ffffff80090b3ba0
[ 0.013405] x9 : 0000000000000004 x8 : 0000000000000040
[ 0.014103] x7 : ffffffc079400270 x6 : 0000000000000000
[ 0.014801] x5 : ffffffc079400248 x4 : 0000000000000000
[ 0.015499] x3 : 0000000000000000 x2 : 0000000000000000
[ 0.016197] x1 : ffffff80091661c0 x0 : fffffffffffffdfb
[ 0.016896] Call trace:
[ 0.017218] __clk_put+0xe8/0x128
[ 0.017654] clk_put+0xc/0x14
[ 0.018048] timer_of_cleanup+0x60/0x7c
[ 0.018551] mtk_syst_init+0x8c/0x9c
[ 0.019020] timer_probe+0x6c/0xe0
[ 0.019469] time_init+0x14/0x44
[ 0.019893] start_kernel+0x2d0/0x46c
[ 0.020378] ---[ end trace 8c1efabea1267649 ]---
[ 0.020982] ------------[ cut here ]------------
[ 0.021586] Trying to vfree() nonexistent vm area ((____ptrval____))
[ 0.022427] WARNING: CPU: 0 PID: 0 at __vunmap+0xd0/0xd8
[ 0.023119] Modules linked in:
[ 0.023524] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 4.19.67+ #1
[ 0.024498] Hardware name: MediaTek MT8183 (DT)
[ 0.025091] pstate: 60400085 (nZCv daIf +PAN -UAO)
[ 0.025718] pc : __vunmap+0xd0/0xd8
[ 0.026176] lr : __vunmap+0xd0/0xd8
[ 0.026632] sp : ffffff80090b3e90
[ 0.027066] x29: ffffff80090b3e90 x28: 0000000040e20018
[ 0.027764] x27: ffffffc07bfff780 x26: 0000000000000001
[ 0.028462] x25: ffffff80090bda80 x24: ffffff8008ec5828
[ 0.029160] x23: ffffff80090bd000 x22: ffffff8008d8b2e8
[ 0.029858] x21: 0000000000000000 x20: 0000000000000000
[ 0.030556] x19: ffffff800800d000 x18: 00000000002bffa8
[ 0.031254] x17: 0000000000000000 x16: 0000000000000000
[ 0.031952] x15: ffffffbf004a6800 x14: 3536343038393334
[ 0.032651] x13: 2079726576652073 x12: 7eb9c62c5c38f100
[ 0.033349] x11: ffffff80090b3b40 x10: ffffff80090b3b40
[ 0.034047] x9 : 0000000000000005 x8 : 5f5f6c6176727470
[ 0.034745] x7 : 5f5f5f5f28282061 x6 : ffffff80091c86ef
[ 0.035443] x5 : ffffff800852b690 x4 : 0000000000000000
[ 0.036141] x3 : 0000000000000002 x2 : 0000000000000002
[ 0.036839] x1 : 7eb9c62c5c38f100 x0 : 7eb9c62c5c38f100
[ 0.037536] Call trace:
[ 0.037859] __vunmap+0xd0/0xd8
[ 0.038271] vunmap+0x24/0x30
[ 0.038664] __iounmap+0x2c/0x34
[ 0.039088] timer_of_cleanup+0x70/0x7c
[ 0.039591] mtk_syst_init+0x8c/0x9c
[ 0.040060] timer_probe+0x6c/0xe0
[ 0.040507] time_init+0x14/0x44
[ 0.040932] start_kernel+0x2d0/0x46c
This commit remove the calls to timer_of_cleanup when timer_of_init
fails since it is unnecessary and actually cause warnings to be printed.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
---
drivers/clocksource/timer-mediatek.c | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/clocksource/timer-mediatek.c b/drivers/clocksource/timer-mediatek.c
index a562f491b0f8..9318edcd8963 100644
--- a/drivers/clocksource/timer-mediatek.c
+++ b/drivers/clocksource/timer-mediatek.c
@@ -268,15 +268,12 @@ static int __init mtk_syst_init(struct device_node *node)
ret = timer_of_init(node, &to);
if (ret)
- goto err;
+ return ret;
clockevents_config_and_register(&to.clkevt, timer_of_rate(&to),
TIMER_SYNC_TICKS, 0xffffffff);
return 0;
-err:
- timer_of_cleanup(&to);
- return ret;
}
static int __init mtk_gpt_init(struct device_node *node)
@@ -293,7 +290,7 @@ static int __init mtk_gpt_init(struct device_node *node)
ret = timer_of_init(node, &to);
if (ret)
- goto err;
+ return ret;
/* Configure clock source */
mtk_gpt_setup(&to, TIMER_CLK_SRC, GPT_CTRL_OP_FREERUN);
@@ -311,9 +308,6 @@ static int __init mtk_gpt_init(struct device_node *node)
mtk_gpt_enable_irq(&to, TIMER_CLK_EVT);
return 0;
-err:
- timer_of_cleanup(&to);
- return ret;
}
TIMER_OF_DECLARE(mtk_mt6577, "mediatek,mt6577-timer", mtk_gpt_init);
TIMER_OF_DECLARE(mtk_mt6765, "mediatek,mt6765-timer", mtk_syst_init);
--
2.23.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-09-19 19:14 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-19 19:13 Fabien Parent [this message]
2019-09-25 16:42 ` [PATCH] clocksource: mediatek: fix error handling Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190919191315.25190-1-fparent@baylibre.com \
--to=fparent@baylibre.com \
--cc=daniel.lezcano@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).