From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-8.2 required=3.0 tests=DKIMWL_WL_HIGH,DKIM_SIGNED, DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED,USER_AGENT_SANE_1 autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 5CE0DC3A5A6 for ; Mon, 23 Sep 2019 09:23:22 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 2C19720673 for ; Mon, 23 Sep 2019 09:23:22 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="Ekf8gjbr" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 2C19720673 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=iki.fi Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+infradead-linux-arm-kernel=archiver.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:In-Reply-To:MIME-Version:References: Message-ID:Subject:To:From:Date:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=9iiEIqxg6RsvfwnQj0AjnFMFcwFj3+yfq0pF/Ayomo4=; b=Ekf8gjbrh9dhPe czj7zYKF41+RhYLGaZ709swF8CNRffiU7dIBDKNRrDhkbg3nkbqIvkeebGmaB9mR52XPOpszI0Xyw etxbOQ1qf6/KgqITMc2tNlfLSir1JDnHKfUfG4+PkQn+qwG7yLgF2zNXowY9Ym3d1xZigh4te2Dcs l/MJHCIouapps/haJwOHKCFZoB3nwPGAzGQSYlMEheerIK85Y+N0sZn+W+Y+ArbKkRah7+gl2eb33 w1DBAua0MRaRW3fAFmvx4m9yuy4t0Rdy6fjWeavqkQpkGlSVRZ0RFWTk3pSzdFr6qO8RrdEi8eWzF 2/9xFcHsVy7Y7tCnmcxw==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.92.2 #3 (Red Hat Linux)) id 1iCKYt-0004y9-TB; Mon, 23 Sep 2019 09:23:15 +0000 Received: from hillosipuli.retiisi.org.uk ([2a01:4f9:c010:4572::81:2]) by bombadil.infradead.org with esmtps (Exim 4.92.2 #3 (Red Hat Linux)) id 1iCKYp-0004xS-2c for linux-arm-kernel@lists.infradead.org; Mon, 23 Sep 2019 09:23:14 +0000 Received: from valkosipuli.localdomain (valkosipuli.retiisi.org.uk [IPv6:2a01:4f9:c010:4572::80:2]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-256) server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by hillosipuli.retiisi.org.uk (Postfix) with ESMTPS id B2D03634C87; Mon, 23 Sep 2019 12:22:08 +0300 (EEST) Received: from sailus by valkosipuli.localdomain with local (Exim 4.92) (envelope-from ) id 1iCKXp-0002AO-Hp; Mon, 23 Sep 2019 12:22:09 +0300 Date: Mon, 23 Sep 2019 12:22:09 +0300 From: Sakari Ailus To: Manivannan Sadhasivam Subject: Re: [PATCH v3 2/3] media: i2c: Add IMX290 CMOS image sensor driver Message-ID: <20190923092209.GL5525@valkosipuli.retiisi.org.uk> References: <20190830091943.22646-1-manivannan.sadhasivam@linaro.org> <20190830091943.22646-3-manivannan.sadhasivam@linaro.org> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <20190830091943.22646-3-manivannan.sadhasivam@linaro.org> User-Agent: Mutt/1.10.1 (2018-07-13) X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20190923_022311_516706_4CDF3DF5 X-CRM114-Status: GOOD ( 27.61 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, c.barrett@framos.com, linux-kernel@vger.kernel.org, a.brela@framos.com, robh+dt@kernel.org, mchehab@kernel.org, linux-arm-kernel@lists.infradead.org, linux-media@vger.kernel.org Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+infradead-linux-arm-kernel=archiver.kernel.org@lists.infradead.org Hi Manivannan, On Fri, Aug 30, 2019 at 02:49:42PM +0530, Manivannan Sadhasivam wrote: > Add driver for Sony IMX290 CMOS image sensor driver. The driver only > supports I2C interface for programming and MIPI CSI-2 for sensor output. > > Signed-off-by: Manivannan Sadhasivam > --- > drivers/media/i2c/Kconfig | 11 + > drivers/media/i2c/Makefile | 1 + > drivers/media/i2c/imx290.c | 881 +++++++++++++++++++++++++++++++++++++ > 3 files changed, 893 insertions(+) > create mode 100644 drivers/media/i2c/imx290.c > > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig > index 79ce9ec6fc1b..4ebb80b18748 100644 > --- a/drivers/media/i2c/Kconfig > +++ b/drivers/media/i2c/Kconfig > @@ -595,6 +595,17 @@ config VIDEO_IMX274 > This is a V4L2 sensor driver for the Sony IMX274 > CMOS image sensor. > > +config VIDEO_IMX290 > + tristate "Sony IMX290 sensor support" > + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API > + depends on MEDIA_CAMERA_SUPPORT Please drop this line. It will be redundant very soon. > + help > + This is a Video4Linux2 sensor driver for the Sony > + IMX290 camera sensor. > + > + To compile this driver as a module, choose M here: the > + module will be called imx290. > + > config VIDEO_IMX319 > tristate "Sony IMX319 sensor support" > depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile > index fd4ea86dedd5..04411ddb4922 100644 > --- a/drivers/media/i2c/Makefile > +++ b/drivers/media/i2c/Makefile > @@ -111,6 +111,7 @@ obj-$(CONFIG_VIDEO_TC358743) += tc358743.o > obj-$(CONFIG_VIDEO_IMX214) += imx214.o > obj-$(CONFIG_VIDEO_IMX258) += imx258.o > obj-$(CONFIG_VIDEO_IMX274) += imx274.o > +obj-$(CONFIG_VIDEO_IMX290) += imx290.o > obj-$(CONFIG_VIDEO_IMX319) += imx319.o > obj-$(CONFIG_VIDEO_IMX355) += imx355.o > obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o > diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c > new file mode 100644 > index 000000000000..db5bb0d69eb8 > --- /dev/null > +++ b/drivers/media/i2c/imx290.c > @@ -0,0 +1,881 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Sony IMX290 CMOS Image Sensor Driver > + * > + * Copyright (C) 2019 FRAMOS GmbH. > + * > + * Copyright (C) 2019 Linaro Ltd. > + * Author: Manivannan Sadhasivam > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#define IMX290_STANDBY 0x3000 > +#define IMX290_REGHOLD 0x3001 > +#define IMX290_XMSTA 0x3002 > +#define IMX290_GAIN 0x3014 > + > +#define IMX290_DEFAULT_LINK_FREQ 445500000 > + > +static const char * const imx290_supply_name[] = { > + "vdda", > + "vddd", > + "vdddo", > +}; > + > +#define IMX290_NUM_SUPPLIES ARRAY_SIZE(imx290_supply_name) > + > +struct imx290_regval { > + u16 reg; > + u8 val; > +}; > + > +struct imx290_mode { > + u32 width; > + u32 height; > + u32 pixel_rate; > + u32 link_freq_index; > + > + const struct imx290_regval *data; > + u32 data_size; > +}; > + > +struct imx290 { > + struct device *dev; > + struct clk *xclk; > + struct regmap *regmap; > + > + struct v4l2_subdev sd; > + struct v4l2_fwnode_endpoint ep; > + struct media_pad pad; > + struct v4l2_mbus_framefmt current_format; > + const struct imx290_mode *current_mode; > + > + struct regulator_bulk_data supplies[IMX290_NUM_SUPPLIES]; > + struct gpio_desc *rst_gpio; > + > + struct v4l2_ctrl_handler ctrls; > + struct v4l2_ctrl *link_freq; > + struct v4l2_ctrl *pixel_rate; > + > + struct mutex lock; > +}; > + > +struct imx290_pixfmt { > + u32 code; > +}; > + > +static const struct imx290_pixfmt imx290_formats[] = { > + { MEDIA_BUS_FMT_SRGGB10_1X10 }, You have a single format here. You don't need the entire array, do you? Unless you have plans to add more, that is. > +}; > + > +static struct regmap_config imx290_regmap_config = { > + .reg_bits = 16, > + .val_bits = 8, > + .cache_type = REGCACHE_RBTREE, > +}; > + > +static const struct imx290_regval imx290_global_init_settings[] = { > + { 0x3007, 0x00 }, > + { 0x3009, 0x00 }, > + { 0x3018, 0x65 }, > + { 0x3019, 0x04 }, > + { 0x301a, 0x00 }, > + { 0x3443, 0x03 }, > + { 0x3444, 0x20 }, > + { 0x3445, 0x25 }, > + { 0x3407, 0x03 }, > + { 0x303a, 0x0c }, > + { 0x3040, 0x00 }, > + { 0x3041, 0x00 }, > + { 0x303c, 0x00 }, > + { 0x303d, 0x00 }, > + { 0x3042, 0x9c }, > + { 0x3043, 0x07 }, > + { 0x303e, 0x49 }, > + { 0x303f, 0x04 }, > + { 0x304b, 0x0a }, > + { 0x300f, 0x00 }, > + { 0x3010, 0x21 }, > + { 0x3012, 0x64 }, > + { 0x3016, 0x09 }, > + { 0x3070, 0x02 }, > + { 0x3071, 0x11 }, > + { 0x309b, 0x10 }, > + { 0x309c, 0x22 }, > + { 0x30a2, 0x02 }, > + { 0x30a6, 0x20 }, > + { 0x30a8, 0x20 }, > + { 0x30aa, 0x20 }, > + { 0x30ac, 0x20 }, > + { 0x30b0, 0x43 }, > + { 0x3119, 0x9e }, > + { 0x311c, 0x1e }, > + { 0x311e, 0x08 }, > + { 0x3128, 0x05 }, > + { 0x313d, 0x83 }, > + { 0x3150, 0x03 }, > + { 0x317e, 0x00 }, > + { 0x32b8, 0x50 }, > + { 0x32b9, 0x10 }, > + { 0x32ba, 0x00 }, > + { 0x32bb, 0x04 }, > + { 0x32c8, 0x50 }, > + { 0x32c9, 0x10 }, > + { 0x32ca, 0x00 }, > + { 0x32cb, 0x04 }, > + { 0x332c, 0xd3 }, > + { 0x332d, 0x10 }, > + { 0x332e, 0x0d }, > + { 0x3358, 0x06 }, > + { 0x3359, 0xe1 }, > + { 0x335a, 0x11 }, > + { 0x3360, 0x1e }, > + { 0x3361, 0x61 }, > + { 0x3362, 0x10 }, > + { 0x33b0, 0x50 }, > + { 0x33b2, 0x1a }, > + { 0x33b3, 0x04 }, > +}; > + > +static const struct imx290_regval imx290_1080p_settings[] = { > + /* mode settings */ > + { 0x3007, 0x00 }, > + { 0x303a, 0x0c }, > + { 0x3414, 0x0a }, > + { 0x3472, 0x80 }, > + { 0x3473, 0x07 }, > + { 0x3418, 0x38 }, > + { 0x3419, 0x04 }, > + { 0x3012, 0x64 }, > + { 0x3013, 0x00 }, > + { 0x305c, 0x18 }, > + { 0x305d, 0x03 }, > + { 0x305e, 0x20 }, > + { 0x305f, 0x01 }, > + { 0x315e, 0x1a }, > + { 0x3164, 0x1a }, > + { 0x3480, 0x49 }, > + /* data rate settings */ > + { 0x3009, 0x01 }, > + { 0x3405, 0x10 }, > + { 0x3446, 0x57 }, > + { 0x3447, 0x00 }, > + { 0x3448, 0x37 }, > + { 0x3449, 0x00 }, > + { 0x344a, 0x1f }, > + { 0x344b, 0x00 }, > + { 0x344c, 0x1f }, > + { 0x344d, 0x00 }, > + { 0x344e, 0x1f }, > + { 0x344f, 0x00 }, > + { 0x3450, 0x77 }, > + { 0x3451, 0x00 }, > + { 0x3452, 0x1f }, > + { 0x3453, 0x00 }, > + { 0x3454, 0x17 }, > + { 0x3455, 0x00 }, > + { 0x301c, 0x98 }, > + { 0x301d, 0x08 }, > +}; > + > +static const struct imx290_regval imx290_720p_settings[] = { > + /* mode settings */ > + { 0x3007, 0x10 }, > + { 0x303a, 0x06 }, > + { 0x3414, 0x04 }, > + { 0x3472, 0x00 }, > + { 0x3473, 0x05 }, > + { 0x3418, 0xd0 }, > + { 0x3419, 0x02 }, > + { 0x3012, 0x64 }, > + { 0x3013, 0x00 }, > + { 0x305c, 0x20 }, > + { 0x305d, 0x00 }, > + { 0x305e, 0x20 }, > + { 0x305f, 0x01 }, > + { 0x315e, 0x1a }, > + { 0x3164, 0x1a }, > + { 0x3480, 0x49 }, > + /* data rate settings */ > + { 0x3009, 0x01 }, > + { 0x3405, 0x10 }, > + { 0x3446, 0x4f }, > + { 0x3447, 0x00 }, > + { 0x3448, 0x2f }, > + { 0x3449, 0x00 }, > + { 0x344a, 0x17 }, > + { 0x344b, 0x00 }, > + { 0x344c, 0x17 }, > + { 0x344d, 0x00 }, > + { 0x344e, 0x17 }, > + { 0x344f, 0x00 }, > + { 0x3450, 0x57 }, > + { 0x3451, 0x00 }, > + { 0x3452, 0x17 }, > + { 0x3453, 0x00 }, > + { 0x3454, 0x17 }, > + { 0x3455, 0x00 }, > + { 0x301c, 0xe4 }, > + { 0x301d, 0x0c }, > +}; > + > +static const struct imx290_regval imx290_10bit_settings[] = { > + { 0x3005, 0x00}, > + { 0x3046, 0x00}, > + { 0x3129, 0x1d}, > + { 0x317c, 0x12}, > + { 0x31ec, 0x37}, > + { 0x3441, 0x0a}, > + { 0x3442, 0x0a}, > + { 0x300a, 0x3c}, > + { 0x300b, 0x00}, > +}; > + > +/* supported link frequencies */ > +static const s64 imx290_link_freq[] = { > + IMX290_DEFAULT_LINK_FREQ, > +}; > + > +/* Mode configs */ > +static const struct imx290_mode imx290_modes[] = { > + { > + .width = 1920, > + .height = 1080, > + .data = imx290_1080p_settings, > + .data_size = ARRAY_SIZE(imx290_1080p_settings), > + .pixel_rate = 178200000, > + .link_freq_index = 0, > + }, > + { > + .width = 1280, > + .height = 720, > + .data = imx290_720p_settings, > + .data_size = ARRAY_SIZE(imx290_720p_settings), > + .pixel_rate = 178200000, > + .link_freq_index = 0, > + }, > +}; > + > +static inline struct imx290 *to_imx290(struct v4l2_subdev *_sd) > +{ > + return container_of(_sd, struct imx290, sd); > +} > + > +static inline int imx290_read_reg(struct imx290 *imx290, u16 addr, u8 *value) > +{ > + u32 regval; I don't remember for sure what I asked previously, but feel free to make this unsigned int again. The third argument of regmap_read() is of that type. > + int ret; > + > + ret = regmap_read(imx290->regmap, addr, ®val); > + if (ret) { > + dev_err(imx290->dev, "I2C read failed for addr: %x\n", addr); > + return ret; > + } > + > + *value = regval & 0xff; > + > + return 0; > +} > + > +static int imx290_write_reg(struct imx290 *imx290, u16 addr, u8 value) > +{ > + int ret; > + > + ret = regmap_write(imx290->regmap, addr, value); > + if (ret) { > + dev_err(imx290->dev, "I2C write failed for addr: %x\n", addr); > + return ret; > + } > + > + return ret; > +} > + > +static int imx290_set_register_array(struct imx290 *imx290, > + const struct imx290_regval *settings, > + unsigned int num_settings) > +{ > + unsigned int i; > + int ret; > + > + for (i = 0; i < num_settings; ++i, ++settings) { > + ret = imx290_write_reg(imx290, settings->reg, settings->val); > + if (ret < 0) > + return ret; > + > + /* Settle time is 10ms for all registers */ > + msleep(10); > + } > + > + return 0; > +} > + > +static int imx290_write_buffered_reg(struct imx290 *imx290, u16 address_low, > + u8 nr_regs, u32 value) > +{ > + unsigned int i; > + int ret; > + > + ret = imx290_write_reg(imx290, IMX290_REGHOLD, 0x01); > + if (ret) { > + dev_err(imx290->dev, "Error setting hold register\n"); > + return ret; > + } > + > + for (i = 0; i < nr_regs; i++) { > + ret = imx290_write_reg(imx290, address_low + i, > + (u8)(value >> (i * 8))); > + if (ret) { > + dev_err(imx290->dev, "Error writing buffered registers\n"); > + return ret; > + } > + } > + > + ret = imx290_write_reg(imx290, IMX290_REGHOLD, 0x00); > + if (ret) { > + dev_err(imx290->dev, "Error setting hold register\n"); > + return ret; > + } > + > + return ret; > +} > + > +static int imx290_set_gain(struct imx290 *imx290, u32 value) > +{ > + int ret; > + > + u32 adjusted_value = (value * 10) / 3; What's the purpose of this? Why not to use the value directly? > + > + ret = imx290_write_buffered_reg(imx290, IMX290_GAIN, 1, adjusted_value); > + if (ret) > + dev_err(imx290->dev, "Unable to write gain\n"); > + > + return ret; > +} > + > +static int imx290_set_power_on(struct imx290 *imx290) > +{ > + int ret; > + > + ret = clk_prepare_enable(imx290->xclk); Please move the code from this function to the runtime PM runtime suspend callback. The same for imx290_set_power_off(). > + if (ret) { > + dev_err(imx290->dev, "Failed to enable clock\n"); > + return ret; > + } > + > + ret = regulator_bulk_enable(IMX290_NUM_SUPPLIES, > + imx290->supplies); Fits on a single line. > + if (ret) { > + dev_err(imx290->dev, "Failed to enable regulators\n"); > + goto xclk_off; > + } > + > + usleep_range(1, 2); > + gpiod_set_value_cansleep(imx290->rst_gpio, 1); > + usleep_range(30000, 31000); > + > + return 0; > + > +xclk_off: > + clk_disable_unprepare(imx290->xclk); > + return ret; > +} > + > +/* Stop streaming */ > +static int imx290_stop_streaming(struct imx290 *imx290) > +{ > + int ret; > + > + ret = imx290_write_reg(imx290, IMX290_STANDBY, 0x01); > + if (ret < 0) > + return ret; > + > + msleep(30); > + > + return imx290_write_reg(imx290, IMX290_XMSTA, 0x01); > +} > + > +static void imx290_set_power_off(struct imx290 *imx290) > +{ > + clk_disable_unprepare(imx290->xclk); > + gpiod_set_value_cansleep(imx290->rst_gpio, 0); > + regulator_bulk_disable(IMX290_NUM_SUPPLIES, imx290->supplies); > +} > + > +static int imx290_set_ctrl(struct v4l2_ctrl *ctrl) > +{ > + struct imx290 *imx290 = container_of(ctrl->handler, > + struct imx290, ctrls); > + int ret = 0; > + > + /* V4L2 controls values will be applied only when power is already up */ > + if (!pm_runtime_get_if_in_use(imx290->dev)) > + return 0; > + > + switch (ctrl->id) { > + case V4L2_CID_GAIN: > + ret = imx290_set_gain(imx290, ctrl->val); > + break; > + default: > + ret = -EINVAL; > + break; > + } > + > + pm_runtime_put(imx290->dev); > + > + return ret; > +} > + > +static const struct v4l2_ctrl_ops imx290_ctrl_ops = { > + .s_ctrl = imx290_set_ctrl, > +}; > + > +static int imx290_enum_mbus_code(struct v4l2_subdev *sd, > + struct v4l2_subdev_pad_config *cfg, > + struct v4l2_subdev_mbus_code_enum *code) > +{ > + if (code->index >= ARRAY_SIZE(imx290_formats)) > + return -EINVAL; > + > + code->code = imx290_formats[code->index].code; > + > + return 0; > +} > + > +static int imx290_get_fmt(struct v4l2_subdev *sd, > + struct v4l2_subdev_pad_config *cfg, > + struct v4l2_subdev_format *fmt) > +{ > + struct imx290 *imx290 = to_imx290(sd); > + struct v4l2_mbus_framefmt *framefmt; > + > + mutex_lock(&imx290->lock); > + > + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) > + framefmt = v4l2_subdev_get_try_format(&imx290->sd, cfg, > + fmt->pad); > + else > + framefmt = &imx290->current_format; > + > + fmt->format = *framefmt; > + > + mutex_unlock(&imx290->lock); > + > + return 0; > +} > + > +static int imx290_set_fmt(struct v4l2_subdev *sd, > + struct v4l2_subdev_pad_config *cfg, > + struct v4l2_subdev_format *fmt) > +{ > + struct imx290 *imx290 = to_imx290(sd); > + const struct imx290_mode *mode; > + struct v4l2_mbus_framefmt *format; > + int i, ret = 0; unsigned int i > + > + mutex_lock(&imx290->lock); > + > + mode = v4l2_find_nearest_size(imx290_modes, > + ARRAY_SIZE(imx290_modes), > + width, height, > + fmt->format.width, fmt->format.height); > + > + fmt->format.width = mode->width; > + fmt->format.height = mode->height; > + > + for (i = 0; i < ARRAY_SIZE(imx290_formats); i++) > + if (imx290_formats[i].code == fmt->format.code) > + break; > + > + if (i >= ARRAY_SIZE(imx290_formats)) > + i = 0; > + > + fmt->format.code = imx290_formats[i].code; > + fmt->format.field = V4L2_FIELD_NONE; > + > + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > + format = v4l2_subdev_get_try_format(sd, cfg, fmt->pad); > + } else { > + format = &imx290->current_format; > + __v4l2_ctrl_s_ctrl(imx290->link_freq, mode->link_freq_index); > + __v4l2_ctrl_s_ctrl_int64(imx290->pixel_rate, mode->pixel_rate); > + > + imx290->current_mode = mode; > + } > + > + *format = fmt->format; > + > + mutex_unlock(&imx290->lock); > + > + return ret; > +} > + > +static int imx290_entity_init_cfg(struct v4l2_subdev *subdev, > + struct v4l2_subdev_pad_config *cfg) > +{ > + struct v4l2_subdev_format fmt = { 0 }; > + > + fmt.which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; > + fmt.format.width = 1920; > + fmt.format.height = 1080; > + > + imx290_set_fmt(subdev, cfg, &fmt); > + > + return 0; > +} > + > +static int imx290_write_current_format(struct imx290 *imx290, > + struct v4l2_mbus_framefmt *format) > +{ > + int ret; > + > + switch (format->code) { > + case MEDIA_BUS_FMT_SRGGB10_1X10: > + ret = imx290_set_register_array(imx290, imx290_10bit_settings, > + ARRAY_SIZE(imx290_10bit_settings)); Indentation. > + if (ret < 0) { > + dev_err(imx290->dev, "Could not set format registers\n"); > + return ret; > + } > + break; > + default: > + dev_err(imx290->dev, "Unknown pixel format\n"); > + return -EINVAL; > + } > + > + return 0; > +} > + > +/* Start streaming */ > +static int imx290_start_streaming(struct imx290 *imx290) > +{ > + int ret; > + > + /* Set init register settings */ > + ret = imx290_set_register_array(imx290, imx290_global_init_settings, > + ARRAY_SIZE(imx290_global_init_settings)); > + if (ret < 0) { > + dev_err(imx290->dev, "Could not set init registers\n"); > + return ret; > + } > + > + /* Set current frame format */ > + ret = imx290_write_current_format(imx290, &imx290->current_format); > + if (ret < 0) { > + dev_err(imx290->dev, "Could not set frame format\n"); > + return ret; > + } > + > + /* Apply default values of current mode */ > + ret = imx290_set_register_array(imx290, imx290->current_mode->data, > + imx290->current_mode->data_size); > + if (ret < 0) { > + dev_err(imx290->dev, "Could not set current mode\n"); > + return ret; > + } > + > + /* Apply customized values from user */ > + ret = v4l2_ctrl_handler_setup(imx290->sd.ctrl_handler); > + if (ret) { > + dev_err(imx290->dev, "Could not sync v4l2 controls\n"); > + return ret; > + } > + > + ret = imx290_write_reg(imx290, IMX290_STANDBY, 0x00); > + if (ret < 0) > + return ret; > + > + msleep(30); > + > + /* Start streaming */ > + return imx290_write_reg(imx290, IMX290_XMSTA, 0x00); > +} > + > +static int imx290_set_stream(struct v4l2_subdev *sd, int enable) > +{ > + struct imx290 *imx290 = to_imx290(sd); > + int ret = 0; > + > + if (enable) { > + ret = pm_runtime_get_sync(imx290->dev); > + if (ret < 0) { > + pm_runtime_put_noidle(imx290->dev); > + goto unlock_and_return; > + } > + > + ret = imx290_start_streaming(imx290); > + if (ret) { > + dev_err(imx290->dev, "Start stream failed\n"); > + pm_runtime_put(imx290->dev); > + goto unlock_and_return; > + } > + } else { > + imx290_stop_streaming(imx290); > + pm_runtime_put(imx290->dev); > + } > + > +unlock_and_return: > + > + return ret; > +} > + > +static int imx290_get_regulators(struct device *dev, struct imx290 *imx290) > +{ > + unsigned int i; > + > + for (i = 0; i < IMX290_NUM_SUPPLIES; i++) > + imx290->supplies[i].supply = imx290_supply_name[i]; > + > + return devm_regulator_bulk_get(dev, IMX290_NUM_SUPPLIES, > + imx290->supplies); > +} > + > +static int __maybe_unused imx290_runtime_resume(struct device *dev) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > + struct imx290 *imx290 = to_imx290(sd); > + > + return imx290_set_power_on(imx290); > +} > + > +static int __maybe_unused imx290_runtime_suspend(struct device *dev) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > + struct imx290 *imx290 = to_imx290(sd); > + > + imx290_set_power_off(imx290); > + > + return 0; > +} > + > +static const struct dev_pm_ops imx290_pm_ops = { > + SET_RUNTIME_PM_OPS(imx290_runtime_suspend, > + imx290_runtime_resume, NULL) Fits on a single line. > +}; > + > +static const struct v4l2_subdev_video_ops imx290_video_ops = { > + .s_stream = imx290_set_stream, > +}; > + > +static const struct v4l2_subdev_pad_ops imx290_pad_ops = { > + .init_cfg = imx290_entity_init_cfg, > + .enum_mbus_code = imx290_enum_mbus_code, > + .get_fmt = imx290_get_fmt, > + .set_fmt = imx290_set_fmt, > +}; > + > +static const struct v4l2_subdev_ops imx290_subdev_ops = { > + .video = &imx290_video_ops, > + .pad = &imx290_pad_ops, > +}; > + > +static const struct media_entity_operations imx290_subdev_entity_ops = { > + .link_validate = v4l2_subdev_link_validate, > +}; > + > +static int imx290_probe(struct i2c_client *client) > +{ > + struct device *dev = &client->dev; > + struct fwnode_handle *endpoint; > + struct imx290 *imx290; > + u32 xclk_freq; > + int ret; > + > + imx290 = devm_kzalloc(dev, sizeof(*imx290), GFP_KERNEL); > + if (!imx290) > + return -ENOMEM; > + > + imx290->dev = dev; > + imx290->regmap = devm_regmap_init_i2c(client, &imx290_regmap_config); > + if (IS_ERR(imx290->regmap)) { > + dev_err(dev, "Unable to initialize I2C\n"); > + return -ENODEV; > + } > + > + endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL); > + if (!endpoint) { > + dev_err(dev, "Endpoint node not found\n"); > + return -EINVAL; > + } > + > + ret = v4l2_fwnode_endpoint_alloc_parse(endpoint, &imx290->ep); You're missing v4l2_fwnode_endpoint_free() below, both in error handling as for the successful case. > + fwnode_handle_put(endpoint); > + if (ret) { > + dev_err(dev, "Parsing endpoint node failed\n"); > + return ret; > + } > + > + if (!imx290->ep.nr_of_link_frequencies) { > + dev_err(dev, "link-frequency property not found in DT\n"); > + return -EINVAL; > + } > + > + if (imx290->ep.link_frequencies[0] != IMX290_DEFAULT_LINK_FREQ) { > + dev_err(dev, "Unsupported link frequency\n"); > + return -EINVAL; > + } > + > + /* Only CSI2 is supported for now */ > + if (imx290->ep.bus_type != V4L2_MBUS_CSI2_DPHY) { > + dev_err(dev, "Unsupported bus type, should be CSI2\n"); > + return -EINVAL; > + } > + > + /* Set default mode to max resolution */ > + imx290->current_mode = &imx290_modes[0]; > + > + /* get system clock (xclk) */ > + imx290->xclk = devm_clk_get(dev, "xclk"); > + if (IS_ERR(imx290->xclk)) { > + dev_err(dev, "Could not get xclk"); > + return PTR_ERR(imx290->xclk); > + } > + > + ret = of_property_read_u32(dev->of_node, "clock-frequency", &xclk_freq); You're using the fwnode API elsewhere in the driver; please use fwnode_property_read_u32() here, too. > + if (ret) { > + dev_err(dev, "Could not get xclk frequency\n"); > + return ret; > + } > + > + /* external clock must be 37.125 MHz */ > + if (xclk_freq != 37125000) { > + dev_err(dev, "External clock frequency %u is not supported\n", > + xclk_freq); > + return -EINVAL; > + } > + > + ret = clk_set_rate(imx290->xclk, xclk_freq); > + if (ret) { > + dev_err(dev, "Could not set xclk frequency\n"); > + return ret; > + } > + > + ret = imx290_get_regulators(dev, imx290); > + if (ret < 0) { > + dev_err(dev, "Cannot get regulators\n"); > + return ret; > + } > + > + imx290->rst_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_ASIS); > + if (IS_ERR(imx290->rst_gpio)) { > + dev_err(dev, "Cannot get reset gpio\n"); > + return PTR_ERR(imx290->rst_gpio); > + } > + > + mutex_init(&imx290->lock); > + > + v4l2_ctrl_handler_init(&imx290->ctrls, 3); > + > + v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops, > + V4L2_CID_GAIN, 0, 72, 1, 0); > + imx290->link_freq = v4l2_ctrl_new_int_menu(&imx290->ctrls, > + &imx290_ctrl_ops, > + V4L2_CID_LINK_FREQ, > + ARRAY_SIZE(imx290_link_freq) - 1, > + 0, imx290_link_freq); > + if (imx290->link_freq) > + imx290->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; > + > + imx290->pixel_rate = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops, > + V4L2_CID_PIXEL_RATE, 1, > + INT_MAX, 1, > + imx290_modes[0].pixel_rate); > + > + imx290->sd.ctrl_handler = &imx290->ctrls; > + > + if (imx290->ctrls.error) { > + dev_err(dev, "Control initialization error %d\n", > + imx290->ctrls.error); > + ret = imx290->ctrls.error; > + goto free_ctrl; > + } > + > + v4l2_i2c_subdev_init(&imx290->sd, client, &imx290_subdev_ops); > + imx290->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; > + imx290->sd.dev = &client->dev; > + imx290->sd.entity.ops = &imx290_subdev_entity_ops; > + imx290->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; > + > + imx290->pad.flags = MEDIA_PAD_FL_SOURCE; > + ret = media_entity_pads_init(&imx290->sd.entity, 1, &imx290->pad); > + if (ret < 0) { > + dev_err(dev, "Could not register media entity\n"); > + goto free_ctrl; > + } > + > + ret = v4l2_async_register_subdev(&imx290->sd); > + if (ret < 0) { > + dev_err(dev, "Could not register v4l2 device\n"); > + goto free_entity; > + } > + > + pm_runtime_set_active(dev); > + pm_runtime_enable(dev); Here, runtime PM's idea of your device's power state is that it's powered on. You'll need to manually call the function doing that before you're here. Otherewise there's a chance that the device will be powered off when the first use tries to access it. See e.g. the smiapp driver for an example. > + pm_runtime_idle(dev); > + > + return 0; > + > +free_entity: > + media_entity_cleanup(&imx290->sd.entity); > +free_ctrl: > + v4l2_ctrl_handler_free(&imx290->ctrls); > + mutex_destroy(&imx290->lock); > + > + return ret; > +} > + > +static int imx290_remove(struct i2c_client *client) > +{ > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > + struct imx290 *imx290 = to_imx290(sd); > + > + v4l2_async_unregister_subdev(sd); > + media_entity_cleanup(&sd->entity); > + v4l2_ctrl_handler_free(sd->ctrl_handler); > + > + mutex_destroy(&imx290->lock); > + > + pm_runtime_disable(imx290->dev); > + if (!pm_runtime_status_suspended(imx290->dev)) > + imx290_set_power_off(imx290); > + pm_runtime_set_suspended(imx290->dev); > + > + return 0; > +} > + > +static const struct of_device_id imx290_of_match[] = { > + { .compatible = "sony,imx290" }, > + { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(of, imx290_of_match); > + > +static struct i2c_driver imx290_i2c_driver = { > + .probe_new = imx290_probe, > + .remove = imx290_remove, > + .driver = { > + .name = "imx290", > + .pm = &imx290_pm_ops, > + .of_match_table = of_match_ptr(imx290_of_match), > + }, > +}; > + > +module_i2c_driver(imx290_i2c_driver); > + > +MODULE_DESCRIPTION("Sony IMX290 CMOS Image Sensor Driver"); > +MODULE_AUTHOR("FRAMOS GmbH"); > +MODULE_AUTHOR("Manivannan Sadhasivam "); > +MODULE_LICENSE("GPL v2"); -- Kind regards, Sakari Ailus _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel