From: Krzysztof Kozlowski <krzk@kernel.org>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Jonathan Cameron <jic23@kernel.org>,
Hartmut Knaack <knaack.h@gmx.de>,
Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
Sebastian Reichel <sre@kernel.org>,
Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-iio@vger.kernel.org, linux-pm@vger.kernel.org,
linux-rtc@vger.kernel.org
Subject: [PATCH 1/4] dt-bindings: samsung: Indent examples with four spaces
Date: Wed, 2 Oct 2019 18:07:41 +0200 [thread overview]
Message-ID: <20191002160744.11307-1-krzk@kernel.org> (raw)
Change the indentation of examples used in json-schema bindings from two
to four spaces as this makes the code easier to read and seems to be
preferred in other files.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
.../bindings/arm/samsung/exynos-chipid.yaml | 4 +-
.../bindings/iio/adc/samsung,exynos-adc.yaml | 64 +++++++++----------
.../bindings/power/reset/syscon-poweroff.yaml | 8 +--
.../bindings/power/reset/syscon-reboot.yaml | 8 +--
.../devicetree/bindings/rtc/s3c-rtc.yaml | 12 ++--
5 files changed, 48 insertions(+), 48 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
index 9c573ad7dc7d..ce40adabb4e8 100644
--- a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
@@ -20,6 +20,6 @@ properties:
examples:
- |
chipid@10000000 {
- compatible = "samsung,exynos4210-chipid";
- reg = <0x10000000 0x100>;
+ compatible = "samsung,exynos4210-chipid";
+ reg = <0x10000000 0x100>;
};
diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
index b4c6c26681d9..a0a9b909ac40 100644
--- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
@@ -112,40 +112,40 @@ allOf:
examples:
- |
adc: adc@12d10000 {
- compatible = "samsung,exynos-adc-v1";
- reg = <0x12d10000 0x100>;
- interrupts = <0 106 0>;
- #io-channel-cells = <1>;
- io-channel-ranges;
-
- clocks = <&clock 303>;
- clock-names = "adc";
-
- vdd-supply = <&buck5_reg>;
- samsung,syscon-phandle = <&pmu_system_controller>;
-
- /* NTC thermistor is a hwmon device */
- ncp15wb473@0 {
- compatible = "murata,ncp15wb473";
- pullup-uv = <1800000>;
- pullup-ohm = <47000>;
- pulldown-ohm = <0>;
- io-channels = <&adc 4>;
- };
+ compatible = "samsung,exynos-adc-v1";
+ reg = <0x12d10000 0x100>;
+ interrupts = <0 106 0>;
+ #io-channel-cells = <1>;
+ io-channel-ranges;
+
+ clocks = <&clock 303>;
+ clock-names = "adc";
+
+ vdd-supply = <&buck5_reg>;
+ samsung,syscon-phandle = <&pmu_system_controller>;
+
+ /* NTC thermistor is a hwmon device */
+ ncp15wb473@0 {
+ compatible = "murata,ncp15wb473";
+ pullup-uv = <1800000>;
+ pullup-ohm = <47000>;
+ pulldown-ohm = <0>;
+ io-channels = <&adc 4>;
+ };
};
- |
adc@126c0000 {
- compatible = "samsung,exynos3250-adc";
- reg = <0x126C0000 0x100>;
- interrupts = <0 137 0>;
- #io-channel-cells = <1>;
- io-channel-ranges;
-
- clocks = <&cmu 0>, // CLK_TSADC
- <&cmu 1>; // CLK_SCLK_TSADC
- clock-names = "adc", "sclk";
-
- vdd-supply = <&buck5_reg>;
- samsung,syscon-phandle = <&pmu_system_controller>;
+ compatible = "samsung,exynos3250-adc";
+ reg = <0x126C0000 0x100>;
+ interrupts = <0 137 0>;
+ #io-channel-cells = <1>;
+ io-channel-ranges;
+
+ clocks = <&cmu 0>, // CLK_TSADC
+ <&cmu 1>; // CLK_SCLK_TSADC
+ clock-names = "adc", "sclk";
+
+ vdd-supply = <&buck5_reg>;
+ samsung,syscon-phandle = <&pmu_system_controller>;
};
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
index fb812937b534..520e07e6f21b 100644
--- a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
+++ b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
@@ -53,8 +53,8 @@ allOf:
examples:
- |
poweroff {
- compatible = "syscon-poweroff";
- regmap = <®mapnode>;
- offset = <0x0>;
- mask = <0x7a>;
+ compatible = "syscon-poweroff";
+ regmap = <®mapnode>;
+ offset = <0x0>;
+ mask = <0x7a>;
};
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
index a7920f5eef79..d38006b1f1f4 100644
--- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
+++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
@@ -53,8 +53,8 @@ allOf:
examples:
- |
reboot {
- compatible = "syscon-reboot";
- regmap = <®mapnode>;
- offset = <0x0>;
- mask = <0x1>;
+ compatible = "syscon-reboot";
+ regmap = <®mapnode>;
+ offset = <0x0>;
+ mask = <0x1>;
};
diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml b/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml
index 951a6a485709..95570d7e19eb 100644
--- a/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml
@@ -76,10 +76,10 @@ allOf:
examples:
- |
rtc@10070000 {
- compatible = "samsung,s3c6410-rtc";
- reg = <0x10070000 0x100>;
- interrupts = <0 44 4>, <0 45 4>;
- clocks = <&clock 0>, // CLK_RTC
- <&s2mps11_osc 0>; // S2MPS11_CLK_AP
- clock-names = "rtc", "rtc_src";
+ compatible = "samsung,s3c6410-rtc";
+ reg = <0x10070000 0x100>;
+ interrupts = <0 44 4>, <0 45 4>;
+ clocks = <&clock 0>, // CLK_RTC
+ <&s2mps11_osc 0>; // S2MPS11_CLK_AP
+ clock-names = "rtc", "rtc_src";
};
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-10-02 16:08 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-02 16:07 Krzysztof Kozlowski [this message]
2019-10-02 16:07 ` [PATCH 2/4] dt-bindings: rtc: s3c: Use defines instead of clock numbers Krzysztof Kozlowski
2019-10-07 13:17 ` Alexandre Belloni
2019-10-15 17:10 ` Rob Herring
2019-10-02 16:07 ` [PATCH 3/4] dt-bindings: rtc: s3c: Include generic dt-schema bindings Krzysztof Kozlowski
2019-10-07 13:17 ` Alexandre Belloni
2019-10-15 17:11 ` Rob Herring
2019-10-02 16:07 ` [PATCH 4/4] dt-bindings: iio: adc: exynos: Use defines instead of clock numbers Krzysztof Kozlowski
2019-10-06 10:02 ` Jonathan Cameron
2019-10-15 17:11 ` Rob Herring
2019-10-06 10:01 ` [PATCH 1/4] dt-bindings: samsung: Indent examples with four spaces Jonathan Cameron
2019-10-07 13:17 ` Alexandre Belloni
2019-10-10 16:48 ` Sebastian Reichel
2019-10-15 17:10 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191002160744.11307-1-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=kgene@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).