From: "William Breathitt Gray" <vilhelm.gray@gmail.com>
To: "linus.walleij@linaro.org" <linus.walleij@linaro.org>,
"bgolaszewski@baylibre.com" <bgolaszewski@baylibre.com>,
"akpm@linux-foundation.org" <akpm@linux-foundation.org>
Cc: "linux-arch@vger.kernel.org" <linux-arch@vger.kernel.org>,
"preid@electromag.com.au" <preid@electromag.com.au>,
"yamada.masahiro@socionext.com" <yamada.masahiro@socionext.com>,
"linux-pm@vger.kernel.org" <linux-pm@vger.kernel.org>,
"linux@rasmusvillemoes.dk" <linux@rasmusvillemoes.dk>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"morten.tiljeset@prevas.dk" <morten.tiljeset@prevas.dk>,
"sean.nyekjaer@prevas.dk" <sean.nyekjaer@prevas.dk>,
"linux-gpio@vger.kernel.org" <linux-gpio@vger.kernel.org>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
"lukas@wunner.de" <lukas@wunner.de>,
"geert@linux-m68k.org" <geert@linux-m68k.org>,
William Breathitt Gray <vilhelm.gray@gmail.com>,
"andriy.shevchenko@linux.intel.com"
<andriy.shevchenko@linux.intel.com>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v17 02/14] lib/test_bitmap.c: Add for_each_set_clump8 test cases
Date: Wed, 9 Oct 2019 11:27:00 -0400 [thread overview]
Message-ID: febc0fb8151e3e3fdd61c34da9193d1c4d7e6c12.1570633189.git.vilhelm.gray@gmail.com
Message-ID: <20191009152700.-9T4TcST5li6PTafol7soM-IKQXu477Gu0mV-c8Bq-k@z> (raw)
In-Reply-To: <cover.1570633189.git.vilhelm.gray@gmail.com>
The introduction of the for_each_set_clump8 macro warrants test cases to
verify the implementation. This patch adds test case checks for whether
an out-of-bounds clump index is returned, a zero clump is returned, or
the returned clump value differs from the expected clump value.
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
lib/test_bitmap.c | 65 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 65 insertions(+)
diff --git a/lib/test_bitmap.c b/lib/test_bitmap.c
index 51a98f7ee79e..dc167c13eb39 100644
--- a/lib/test_bitmap.c
+++ b/lib/test_bitmap.c
@@ -92,6 +92,36 @@ __check_eq_u32_array(const char *srcfile, unsigned int line,
return true;
}
+static bool __init __check_eq_clump8(const char *srcfile, unsigned int line,
+ const unsigned int offset,
+ const unsigned int size,
+ const unsigned char *const clump_exp,
+ const unsigned long *const clump)
+{
+ unsigned long exp;
+
+ if (offset >= size) {
+ pr_warn("[%s:%u] bit offset for clump out-of-bounds: expected less than %u, got %u\n",
+ srcfile, line, size, offset);
+ return false;
+ }
+
+ exp = clump_exp[offset / 8];
+ if (!exp) {
+ pr_warn("[%s:%u] bit offset for zero clump: expected nonzero clump, got bit offset %u with clump value 0",
+ srcfile, line, offset);
+ return false;
+ }
+
+ if (*clump != exp) {
+ pr_warn("[%s:%u] expected clump value of 0x%lX, got clump value of 0x%lX",
+ srcfile, line, exp, *clump);
+ return false;
+ }
+
+ return true;
+}
+
#define __expect_eq(suffix, ...) \
({ \
int result = 0; \
@@ -108,6 +138,7 @@ __check_eq_u32_array(const char *srcfile, unsigned int line,
#define expect_eq_bitmap(...) __expect_eq(bitmap, ##__VA_ARGS__)
#define expect_eq_pbl(...) __expect_eq(pbl, ##__VA_ARGS__)
#define expect_eq_u32_array(...) __expect_eq(u32_array, ##__VA_ARGS__)
+#define expect_eq_clump8(...) __expect_eq(clump8, ##__VA_ARGS__)
static void __init test_zero_clear(void)
{
@@ -404,6 +435,39 @@ static void noinline __init test_mem_optimisations(void)
}
}
+static const unsigned char clump_exp[] __initconst = {
+ 0x01, /* 1 bit set */
+ 0x02, /* non-edge 1 bit set */
+ 0x00, /* zero bits set */
+ 0x38, /* 3 bits set across 4-bit boundary */
+ 0x38, /* Repeated clump */
+ 0x0F, /* 4 bits set */
+ 0xFF, /* all bits set */
+ 0x05, /* non-adjacent 2 bits set */
+};
+
+static void __init test_for_each_set_clump8(void)
+{
+#define CLUMP_EXP_NUMBITS 64
+ DECLARE_BITMAP(bits, CLUMP_EXP_NUMBITS);
+ unsigned int start;
+ unsigned long clump;
+
+ /* set bitmap to test case */
+ bitmap_zero(bits, CLUMP_EXP_NUMBITS);
+ bitmap_set(bits, 0, 1); /* 0x01 */
+ bitmap_set(bits, 9, 1); /* 0x02 */
+ bitmap_set(bits, 27, 3); /* 0x28 */
+ bitmap_set(bits, 35, 3); /* 0x28 */
+ bitmap_set(bits, 40, 4); /* 0x0F */
+ bitmap_set(bits, 48, 8); /* 0xFF */
+ bitmap_set(bits, 56, 1); /* 0x05 - part 1 */
+ bitmap_set(bits, 58, 1); /* 0x05 - part 2 */
+
+ for_each_set_clump8(start, clump, bits, CLUMP_EXP_NUMBITS)
+ expect_eq_clump8(start, CLUMP_EXP_NUMBITS, clump_exp, &clump);
+}
+
static void __init selftest(void)
{
test_zero_clear();
@@ -413,6 +477,7 @@ static void __init selftest(void)
test_bitmap_parselist();
test_bitmap_parselist_user();
test_mem_optimisations();
+ test_for_each_set_clump8();
}
KSTM_MODULE_LOADERS(test_bitmap);
--
2.23.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-10-13 0:03 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-09 15:26 [PATCH v17 00/14] Introduce the for_each_set_clump8 macro William Breathitt Gray
2019-10-09 15:26 ` William Breathitt Gray
2019-10-09 15:26 ` [PATCH v17 01/14] bitops: " William Breathitt Gray
2019-10-09 15:26 ` William Breathitt Gray
2019-10-09 16:28 ` Masahiro Yamada
2019-10-09 16:28 ` Masahiro Yamada
2019-10-09 17:02 ` William Breathitt Gray
2019-10-09 17:09 ` Andy Shevchenko
2019-10-09 18:54 ` Geert Uytterhoeven
2019-10-10 2:28 ` Masahiro Yamada
2019-10-10 5:49 ` Andy Shevchenko
2019-10-10 6:29 ` Geert Uytterhoeven
2019-10-10 7:41 ` Andy Shevchenko
2019-10-10 7:49 ` Geert Uytterhoeven
2019-10-10 8:07 ` Andy Shevchenko
2019-10-10 8:21 ` Geert Uytterhoeven
2019-10-10 13:12 ` William Breathitt Gray
2019-10-09 15:27 ` William Breathitt Gray [this message]
2019-10-09 15:27 ` [PATCH v17 02/14] lib/test_bitmap.c: Add for_each_set_clump8 test cases William Breathitt Gray
2019-10-09 15:27 ` [PATCH v17 03/14] gpio: 104-dio-48e: Utilize for_each_set_clump8 macro William Breathitt Gray
2019-10-09 15:27 ` [PATCH v17 04/14] gpio: 104-idi-48: " William Breathitt Gray
2019-10-09 15:27 ` William Breathitt Gray
2019-10-09 15:27 ` [PATCH v17 05/14] gpio: gpio-mm: " William Breathitt Gray
2019-10-09 15:27 ` [PATCH v17 06/14] gpio: ws16c48: " William Breathitt Gray
2019-10-09 15:27 ` [PATCH v17 07/14] gpio: pci-idio-16: " William Breathitt Gray
2019-10-09 15:27 ` William Breathitt Gray
2019-10-09 15:27 ` [PATCH v17 08/14] gpio: pcie-idio-24: " William Breathitt Gray
2019-10-09 15:27 ` William Breathitt Gray
2019-10-09 15:27 ` [PATCH v17 09/14] gpio: uniphier: " William Breathitt Gray
2019-10-09 15:27 ` William Breathitt Gray
2019-10-09 16:33 ` Masahiro Yamada
2019-10-09 16:33 ` Masahiro Yamada
2019-10-09 17:05 ` William Breathitt Gray
2019-10-09 15:27 ` [PATCH v17 10/14] gpio: 74x164: Utilize the " William Breathitt Gray
2019-10-09 15:27 ` William Breathitt Gray
2019-10-09 15:27 ` [PATCH v17 11/14] thermal: intel: intel_soc_dts_iosf: Utilize " William Breathitt Gray
2019-10-09 15:27 ` [PATCH v17 12/14] gpio: pisosr: Utilize the " William Breathitt Gray
2019-10-09 15:27 ` William Breathitt Gray
2019-10-09 15:27 ` [PATCH v17 13/14] gpio: max3191x: " William Breathitt Gray
2019-10-09 15:27 ` William Breathitt Gray
2019-10-09 15:27 ` [PATCH v17 14/14] gpio: pca953x: " William Breathitt Gray
2019-10-09 15:27 ` William Breathitt Gray
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=febc0fb8151e3e3fdd61c34da9193d1c4d7e6c12.1570633189.git.vilhelm.gray@gmail.com \
--to=vilhelm.gray@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=andy.shevchenko@gmail.com \
--cc=bgolaszewski@baylibre.com \
--cc=geert@linux-m68k.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux@rasmusvillemoes.dk \
--cc=lukas@wunner.de \
--cc=morten.tiljeset@prevas.dk \
--cc=preid@electromag.com.au \
--cc=sean.nyekjaer@prevas.dk \
--cc=yamada.masahiro@socionext.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).