Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: "Bartosz Golaszewski" <bgolaszewski@baylibre.com>
To: "Hui Song" <hui.song_1@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	linux-devicetree <devicetree@vger.kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	LKML <linux-kernel@vger.kernel.org>, Li Yang <leoyang.li@nxp.com>,
	linux-gpio <linux-gpio@vger.kernel.org>,
	Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
	arm-soc <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v6] gpio/mpc8xxx: change irq handler from chained to normal
Date: Wed, 9 Oct 2019 18:33:54 +0200
Message-ID: <CAMpxmJVUkkiywMOQ6i_izu+8LQD0S_fpd_iuBz4yGceSrs5beg@mail.gmail.com> (raw)
Message-ID: <20191009163354.06R9HRrR23iqDEeqq75NlRbdGodl5UYEHZ72o7VZrhM@z> (raw)
In-Reply-To: <20191009083021.33529-1-hui.song_1@nxp.com>

śr., 9 paź 2019 o 10:41 Hui Song <hui.song_1@nxp.com> napisał(a):
>
> From: Song Hui <hui.song_1@nxp.com>
>
> More than one gpio controllers can share one interrupt, change the
> driver to request shared irq.
>
> While this will work, it will mess up userspace accounting of the number
> of interrupts per second in tools such as vmstat.  The reason is that
> for every GPIO interrupt, /proc/interrupts records the count against GIC
> interrupt 68 or 69, as well as the GPIO itself.  So, for every GPIO
> interrupt, the total number of interrupts that the system has seen
> increments by two
>
> Signed-off-by: Laurentiu Tudor <Laurentiu.Tudor@nxp.com>
> Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
> Signed-off-by: Song Hui <hui.song_1@nxp.com>
> ---
>  Changes in v6:
>         - change request_irq to devm_request_irq and add commit message.
>  Changes in v5:
>         - add traverse every bit function.
>  Changes in v4:
>         - convert 'pr_err' to 'dev_err'.
>  Changes in v3:
>         - update the patch description.
>  Changes in v2:
>         - delete the compatible of ls1088a.
>
>  drivers/gpio/gpio-mpc8xxx.c | 31 ++++++++++++++++++++-----------
>  1 file changed, 20 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
> index 16a47de..f0be284 100644
> --- a/drivers/gpio/gpio-mpc8xxx.c
> +++ b/drivers/gpio/gpio-mpc8xxx.c
> @@ -22,6 +22,7 @@
>  #include <linux/irq.h>
>  #include <linux/gpio/driver.h>
>  #include <linux/bitops.h>
> +#include <linux/interrupt.h>
>
>  #define MPC8XXX_GPIO_PINS      32
>
> @@ -127,20 +128,20 @@ static int mpc8xxx_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
>                 return -ENXIO;
>  }
>
> -static void mpc8xxx_gpio_irq_cascade(struct irq_desc *desc)
> +static irqreturn_t mpc8xxx_gpio_irq_cascade(int irq, void *data)
>  {
> -       struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_desc_get_handler_data(desc);
> -       struct irq_chip *chip = irq_desc_get_chip(desc);
> +       struct mpc8xxx_gpio_chip *mpc8xxx_gc = data;
>         struct gpio_chip *gc = &mpc8xxx_gc->gc;
>         unsigned int mask;
> +       int i;
>
>         mask = gc->read_reg(mpc8xxx_gc->regs + GPIO_IER)
>                 & gc->read_reg(mpc8xxx_gc->regs + GPIO_IMR);
> -       if (mask)
> +       for_each_set_bit(i, &mask, 32)
>                 generic_handle_irq(irq_linear_revmap(mpc8xxx_gc->irq,
> -                                                    32 - ffs(mask)));
> -       if (chip->irq_eoi)
> -               chip->irq_eoi(&desc->irq_data);
> +                                                    31 - i));
> +
> +       return IRQ_HANDLED;
>  }
>
>  static void mpc8xxx_irq_unmask(struct irq_data *d)
> @@ -388,8 +389,8 @@ static int mpc8xxx_probe(struct platform_device *pdev)
>
>         ret = gpiochip_add_data(gc, mpc8xxx_gc);
>         if (ret) {
> -               pr_err("%pOF: GPIO chip registration failed with status %d\n",
> -                      np, ret);
> +               dev_err(&pdev->dev, "%pOF: GPIO chip registration failed with status %d\n",
> +                       np, ret);

This is unrelated to the patch. Please put it in a separate patch.

Bart

>                 goto err;
>         }
>
> @@ -409,8 +410,16 @@ static int mpc8xxx_probe(struct platform_device *pdev)
>         if (devtype->gpio_dir_in_init)
>                 devtype->gpio_dir_in_init(gc);
>
> -       irq_set_chained_handler_and_data(mpc8xxx_gc->irqn,
> -                                        mpc8xxx_gpio_irq_cascade, mpc8xxx_gc);
> +       ret = devm_request_irq(&pdev->dev, mpc8xxx_gc->irqn,
> +                              mpc8xxx_gpio_irq_cascade,
> +                              IRQF_NO_THREAD | IRQF_SHARED, "gpio-cascade",
> +                              mpc8xxx_gc);
> +       if (ret) {
> +               dev_err(&pdev->dev, "%s: failed to devm_request_irq(%d), ret = %d\n",
> +                       np->full_name, mpc8xxx_gc->irqn, ret);
> +               goto err;
> +       }
> +
>         return 0;
>  err:
>         iounmap(mpc8xxx_gc->regs);
> --
> 2.9.5
>


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply index

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-09  8:30 Hui Song
2019-10-09 16:33 ` Bartosz Golaszewski [this message]
2019-10-09 16:33   ` Bartosz Golaszewski
2019-10-09 16:36 ` Russell King - ARM Linux admin
2019-10-09 16:36   ` Russell King - ARM Linux admin
  -- strict thread matches above, loose matches on Subject: below --
2019-09-27  3:15 Hui Song
2019-09-27  4:33 ` kbuild test robot
2019-09-27  4:53 ` kbuild test robot
2019-10-03 10:19 ` Linus Walleij

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAMpxmJVUkkiywMOQ6i_izu+8LQD0S_fpd_iuBz4yGceSrs5beg@mail.gmail.com \
    --to=bgolaszewski@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=hui.song_1@nxp.com \
    --cc=leoyang.li@nxp.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org infradead-linux-arm-kernel@archiver.kernel.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox