[PATCHv8 0/9] soc: ti: add OMAP PRM driver (for reset)

[PATCHv8 0/9] soc: ti: add OMAP PRM driver (for reset)

[Tero Kristo]

Hi,

Hopefully this is the final revision of the series. Just a repost of v7
with the single comment from Philipp fixed, and added reviewed by tags
from him for couple of the patches.

-Tero


--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCHv8 1/9] dt-bindings: omap: add new binding for PRM instances

[Tero Kristo]

Add new binding for OMAP PRM (Power and Reset Manager) instances. Each
of these will act as a power domain controller and potentially as a reset
provider.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
---
v7:
  - dropped clocks property from example

 .../devicetree/bindings/arm/omap/prm-inst.txt | 29 +++++++++++++++++++
 1 file changed, 29 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/omap/prm-inst.txt

diff --git a/Documentation/devicetree/bindings/arm/omap/prm-inst.txt b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
new file mode 100644
index 000000000000..dfe7c7789ca7
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
@@ -0,0 +1,29 @@
+OMAP PRM instance bindings
+
+Power and Reset Manager is an IP block on OMAP family of devices which
+handle the power domains and their current state, and provide reset
+handling for the domains and/or separate IP blocks under the power domain
+hierarchy.
+
+Required properties:
+- compatible:	Must contain one of the following:
+		"ti,am3-prm-inst"
+		"ti,am4-prm-inst"
+		"ti,omap4-prm-inst"
+		"ti,omap5-prm-inst"
+		"ti,dra7-prm-inst"
+		and additionally must contain:
+		"ti,omap-prm-inst"
+- reg:		Contains PRM instance register address range
+		(base address and length)
+
+Optional properties:
+- #reset-cells:	Should be 1 if the PRM instance in question supports resets.
+
+Example:
+
+prm_dsp2: prm@1b00 {
+	compatible = "ti,omap-prm-inst", "ti,dra7-prm-inst";
+	reg = <0x1b00 0x40>;
+	#reset-cells = <1>;
+};
-- 
2.17.1

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCHv8 2/9] soc: ti: add initial PRM driver with reset control support

[Tero Kristo]

Add initial PRM (Power and Reset Management) driver for TI OMAP class
SoCs. Initially this driver only supports reset control, but can be
extended to support rest of the functionality, like powerdomain
control, PRCM irq support etc.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
---
v8: only write single bit as one when clearing reset status

 arch/arm/mach-omap2/Kconfig |   1 +
 drivers/soc/ti/Makefile     |   1 +
 drivers/soc/ti/omap_prm.c   | 259 ++++++++++++++++++++++++++++++++++++
 3 files changed, 261 insertions(+)
 create mode 100644 drivers/soc/ti/omap_prm.c

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index fdb6743760a2..ad08d470a2ca 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -109,6 +109,7 @@ config ARCH_OMAP2PLUS
 	select TI_SYSC
 	select OMAP_IRQCHIP
 	select CLKSRC_TI_32K
+	select ARCH_HAS_RESET_CONTROLLER
 	help
 	  Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
 
diff --git a/drivers/soc/ti/Makefile b/drivers/soc/ti/Makefile
index b3868d392d4f..788b5cd1e180 100644
--- a/drivers/soc/ti/Makefile
+++ b/drivers/soc/ti/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_KEYSTONE_NAVIGATOR_QMSS)	+= knav_qmss.o
 knav_qmss-y := knav_qmss_queue.o knav_qmss_acc.o
 obj-$(CONFIG_KEYSTONE_NAVIGATOR_DMA)	+= knav_dma.o
 obj-$(CONFIG_AMX3_PM)			+= pm33xx.o
+obj-$(CONFIG_ARCH_OMAP2PLUS)		+= omap_prm.o
 obj-$(CONFIG_WKUP_M3_IPC)		+= wkup_m3_ipc.o
 obj-$(CONFIG_TI_SCI_PM_DOMAINS)		+= ti_sci_pm_domains.o
 obj-$(CONFIG_TI_SCI_INTA_MSI_DOMAIN)	+= ti_sci_inta_msi.o
diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c
new file mode 100644
index 000000000000..ab0b66ad715d
--- /dev/null
+++ b/drivers/soc/ti/omap_prm.c
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * OMAP2+ PRM driver
+ *
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ *	Tero Kristo <t-kristo@ti.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/delay.h>
+
+struct omap_rst_map {
+	s8 rst;
+	s8 st;
+};
+
+struct omap_prm_data {
+	u32 base;
+	const char *name;
+	u16 rstctrl;
+	u16 rstst;
+	const struct omap_rst_map *rstmap;
+	u8 flags;
+};
+
+struct omap_prm {
+	const struct omap_prm_data *data;
+	void __iomem *base;
+};
+
+struct omap_reset_data {
+	struct reset_controller_dev rcdev;
+	struct omap_prm *prm;
+	u32 mask;
+	spinlock_t lock;
+};
+
+#define to_omap_reset_data(p) container_of((p), struct omap_reset_data, rcdev)
+
+#define OMAP_MAX_RESETS		8
+#define OMAP_RESET_MAX_WAIT	10000
+
+#define OMAP_PRM_HAS_RSTCTRL	BIT(0)
+#define OMAP_PRM_HAS_RSTST	BIT(1)
+
+#define OMAP_PRM_HAS_RESETS	(OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_RSTST)
+
+static const struct of_device_id omap_prm_id_table[] = {
+	{ },
+};
+
+static bool _is_valid_reset(struct omap_reset_data *reset, unsigned long id)
+{
+	if (reset->mask & BIT(id))
+		return true;
+
+	return false;
+}
+
+static int omap_reset_get_st_bit(struct omap_reset_data *reset,
+				 unsigned long id)
+{
+	const struct omap_rst_map *map = reset->prm->data->rstmap;
+
+	while (map->rst >= 0) {
+		if (map->rst == id)
+			return map->st;
+
+		map++;
+	}
+
+	return id;
+}
+
+static int omap_reset_status(struct reset_controller_dev *rcdev,
+			     unsigned long id)
+{
+	struct omap_reset_data *reset = to_omap_reset_data(rcdev);
+	u32 v;
+	int st_bit = omap_reset_get_st_bit(reset, id);
+	bool has_rstst = reset->prm->data->rstst ||
+		(reset->prm->data->flags & OMAP_PRM_HAS_RSTST);
+
+	/* Check if we have rstst */
+	if (!has_rstst)
+		return -ENOTSUPP;
+
+	/* Check if hw reset line is asserted */
+	v = readl_relaxed(reset->prm->base + reset->prm->data->rstctrl);
+	if (v & BIT(id))
+		return 1;
+
+	/*
+	 * Check reset status, high value means reset sequence has been
+	 * completed successfully so we can return 0 here (reset deasserted)
+	 */
+	v = readl_relaxed(reset->prm->base + reset->prm->data->rstst);
+	v >>= st_bit;
+	v &= 1;
+
+	return !v;
+}
+
+static int omap_reset_assert(struct reset_controller_dev *rcdev,
+			     unsigned long id)
+{
+	struct omap_reset_data *reset = to_omap_reset_data(rcdev);
+	u32 v;
+	unsigned long flags;
+
+	/* assert the reset control line */
+	spin_lock_irqsave(&reset->lock, flags);
+	v = readl_relaxed(reset->prm->base + reset->prm->data->rstctrl);
+	v |= 1 << id;
+	writel_relaxed(v, reset->prm->base + reset->prm->data->rstctrl);
+	spin_unlock_irqrestore(&reset->lock, flags);
+
+	return 0;
+}
+
+static int omap_reset_deassert(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	struct omap_reset_data *reset = to_omap_reset_data(rcdev);
+	u32 v;
+	int st_bit;
+	bool has_rstst;
+	unsigned long flags;
+
+	has_rstst = reset->prm->data->rstst ||
+		(reset->prm->data->flags & OMAP_PRM_HAS_RSTST);
+
+	if (has_rstst) {
+		st_bit = omap_reset_get_st_bit(reset, id);
+
+		/* Clear the reset status by writing 1 to the status bit */
+		v = 1 << st_bit;
+		writel_relaxed(v, reset->prm->base + reset->prm->data->rstst);
+	}
+
+	/* de-assert the reset control line */
+	spin_lock_irqsave(&reset->lock, flags);
+	v = readl_relaxed(reset->prm->base + reset->prm->data->rstctrl);
+	v &= ~(1 << id);
+	writel_relaxed(v, reset->prm->base + reset->prm->data->rstctrl);
+	spin_unlock_irqrestore(&reset->lock, flags);
+
+	return 0;
+}
+
+static const struct reset_control_ops omap_reset_ops = {
+	.assert		= omap_reset_assert,
+	.deassert	= omap_reset_deassert,
+	.status		= omap_reset_status,
+};
+
+static int omap_prm_reset_xlate(struct reset_controller_dev *rcdev,
+				const struct of_phandle_args *reset_spec)
+{
+	struct omap_reset_data *reset = to_omap_reset_data(rcdev);
+
+	if (!_is_valid_reset(reset, reset_spec->args[0]))
+		return -EINVAL;
+
+	return reset_spec->args[0];
+}
+
+static int omap_prm_reset_init(struct platform_device *pdev,
+			       struct omap_prm *prm)
+{
+	struct omap_reset_data *reset;
+	const struct omap_rst_map *map;
+
+	/*
+	 * Check if we have controllable resets. If either rstctrl is non-zero
+	 * or OMAP_PRM_HAS_RSTCTRL flag is set, we have reset control register
+	 * for the domain.
+	 */
+	if (!prm->data->rstctrl && !(prm->data->flags & OMAP_PRM_HAS_RSTCTRL))
+		return 0;
+
+	map = prm->data->rstmap;
+	if (!map)
+		return -EINVAL;
+
+	reset = devm_kzalloc(&pdev->dev, sizeof(*reset), GFP_KERNEL);
+	if (!reset)
+		return -ENOMEM;
+
+	reset->rcdev.owner = THIS_MODULE;
+	reset->rcdev.ops = &omap_reset_ops;
+	reset->rcdev.of_node = pdev->dev.of_node;
+	reset->rcdev.nr_resets = OMAP_MAX_RESETS;
+	reset->rcdev.of_xlate = omap_prm_reset_xlate;
+	reset->rcdev.of_reset_n_cells = 1;
+	spin_lock_init(&reset->lock);
+
+	reset->prm = prm;
+
+	while (map->rst >= 0) {
+		reset->mask |= BIT(map->rst);
+		map++;
+	}
+
+	return devm_reset_controller_register(&pdev->dev, &reset->rcdev);
+}
+
+static int omap_prm_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	const struct omap_prm_data *data;
+	struct omap_prm *prm;
+	const struct of_device_id *match;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	match = of_match_device(omap_prm_id_table, &pdev->dev);
+	if (!match)
+		return -ENOTSUPP;
+
+	prm = devm_kzalloc(&pdev->dev, sizeof(*prm), GFP_KERNEL);
+	if (!prm)
+		return -ENOMEM;
+
+	data = match->data;
+
+	while (data->base != res->start) {
+		if (!data->base)
+			return -EINVAL;
+		data++;
+	}
+
+	prm->data = data;
+
+	prm->base = devm_ioremap_resource(&pdev->dev, res);
+	if (!prm->base)
+		return -ENOMEM;
+
+	return omap_prm_reset_init(pdev, prm);
+}
+
+static struct platform_driver omap_prm_driver = {
+	.probe = omap_prm_probe,
+	.driver = {
+		.name		= KBUILD_MODNAME,
+		.of_match_table	= omap_prm_id_table,
+	},
+};
+builtin_platform_driver(omap_prm_driver);
-- 
2.17.1

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCHv8 3/9] soc: ti: omap-prm: poll for reset complete during de-assert

[Tero Kristo]

Poll for reset completion status during de-assertion of reset, otherwise
the IP in question might be accessed before it has left reset properly.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 drivers/soc/ti/omap_prm.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c
index ab0b66ad715d..96fa2aad9b93 100644
--- a/drivers/soc/ti/omap_prm.c
+++ b/drivers/soc/ti/omap_prm.c
@@ -153,6 +153,18 @@ static int omap_reset_deassert(struct reset_controller_dev *rcdev,
 	writel_relaxed(v, reset->prm->base + reset->prm->data->rstctrl);
 	spin_unlock_irqrestore(&reset->lock, flags);
 
+	if (!has_rstst)
+		return 0;
+
+	/* wait for the status to be set */
+	ret = readl_relaxed_poll_timeout(reset->prm->base +
+					 reset->prm->data->rstst,
+					 v, v & BIT(st_bit), 1,
+					 OMAP_RESET_MAX_WAIT);
+	if (ret)
+		pr_err("%s: timedout waiting for %s:%lu\n", __func__,
+		       reset->prm->data->name, id);
+
 	return 0;
 }
 
-- 
2.17.1

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCHv8 4/9] soc: ti: omap-prm: add support for denying idle for reset clockdomain

[Tero Kristo]

TI SoCs hardware reset signals require the parent clockdomain to be
in force wakeup mode while de-asserting the reset, otherwise it may
never complete. To support this, add pdata hooks to control the
clockdomain directly.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 drivers/soc/ti/omap_prm.c            | 36 ++++++++++++++++++++++++++--
 include/linux/platform_data/ti-prm.h | 21 ++++++++++++++++
 2 files changed, 55 insertions(+), 2 deletions(-)
 create mode 100644 include/linux/platform_data/ti-prm.h

diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c
index 96fa2aad9b93..3d9393ff67e3 100644
--- a/drivers/soc/ti/omap_prm.c
+++ b/drivers/soc/ti/omap_prm.c
@@ -16,6 +16,8 @@
 #include <linux/reset-controller.h>
 #include <linux/delay.h>
 
+#include <linux/platform_data/ti-prm.h>
+
 struct omap_rst_map {
 	s8 rst;
 	s8 st;
@@ -24,6 +26,7 @@ struct omap_rst_map {
 struct omap_prm_data {
 	u32 base;
 	const char *name;
+	const char *clkdm_name;
 	u16 rstctrl;
 	u16 rstst;
 	const struct omap_rst_map *rstmap;
@@ -40,6 +43,8 @@ struct omap_reset_data {
 	struct omap_prm *prm;
 	u32 mask;
 	spinlock_t lock;
+	struct clockdomain *clkdm;
+	struct device *dev;
 };
 
 #define to_omap_reset_data(p) container_of((p), struct omap_reset_data, rcdev)
@@ -49,6 +54,7 @@ struct omap_reset_data {
 
 #define OMAP_PRM_HAS_RSTCTRL	BIT(0)
 #define OMAP_PRM_HAS_RSTST	BIT(1)
+#define OMAP_PRM_HAS_NO_CLKDM	BIT(2)
 
 #define OMAP_PRM_HAS_RESETS	(OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_RSTST)
 
@@ -133,6 +139,8 @@ static int omap_reset_deassert(struct reset_controller_dev *rcdev,
 	int st_bit;
 	bool has_rstst;
 	unsigned long flags;
+	struct ti_prm_platform_data *pdata = dev_get_platdata(reset->dev);
+	int ret = 0;
 
 	has_rstst = reset->prm->data->rstst ||
 		(reset->prm->data->flags & OMAP_PRM_HAS_RSTST);
@@ -146,6 +154,9 @@ static int omap_reset_deassert(struct reset_controller_dev *rcdev,
 		writel_relaxed(v, reset->prm->base + reset->prm->data->rstst);
 	}
 
+	if (reset->clkdm)
+		pdata->clkdm_deny_idle(reset->clkdm);
+
 	/* de-assert the reset control line */
 	spin_lock_irqsave(&reset->lock, flags);
 	v = readl_relaxed(reset->prm->base + reset->prm->data->rstctrl);
@@ -154,7 +165,7 @@ static int omap_reset_deassert(struct reset_controller_dev *rcdev,
 	spin_unlock_irqrestore(&reset->lock, flags);
 
 	if (!has_rstst)
-		return 0;
+		goto exit;
 
 	/* wait for the status to be set */
 	ret = readl_relaxed_poll_timeout(reset->prm->base +
@@ -165,7 +176,11 @@ static int omap_reset_deassert(struct reset_controller_dev *rcdev,
 		pr_err("%s: timedout waiting for %s:%lu\n", __func__,
 		       reset->prm->data->name, id);
 
-	return 0;
+exit:
+	if (reset->clkdm)
+		pdata->clkdm_allow_idle(reset->clkdm);
+
+	return ret;
 }
 
 static const struct reset_control_ops omap_reset_ops = {
@@ -190,6 +205,8 @@ static int omap_prm_reset_init(struct platform_device *pdev,
 {
 	struct omap_reset_data *reset;
 	const struct omap_rst_map *map;
+	struct ti_prm_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	char buf[32];
 
 	/*
 	 * Check if we have controllable resets. If either rstctrl is non-zero
@@ -199,6 +216,11 @@ static int omap_prm_reset_init(struct platform_device *pdev,
 	if (!prm->data->rstctrl && !(prm->data->flags & OMAP_PRM_HAS_RSTCTRL))
 		return 0;
 
+	/* Check if we have the pdata callbacks in place */
+	if (!pdata || !pdata->clkdm_lookup || !pdata->clkdm_deny_idle ||
+	    !pdata->clkdm_allow_idle)
+		return -EINVAL;
+
 	map = prm->data->rstmap;
 	if (!map)
 		return -EINVAL;
@@ -213,10 +235,20 @@ static int omap_prm_reset_init(struct platform_device *pdev,
 	reset->rcdev.nr_resets = OMAP_MAX_RESETS;
 	reset->rcdev.of_xlate = omap_prm_reset_xlate;
 	reset->rcdev.of_reset_n_cells = 1;
+	reset->dev = &pdev->dev;
 	spin_lock_init(&reset->lock);
 
 	reset->prm = prm;
 
+	sprintf(buf, "%s_clkdm", prm->data->clkdm_name ? prm->data->clkdm_name :
+		prm->data->name);
+
+	if (!(prm->data->flags & OMAP_PRM_HAS_NO_CLKDM)) {
+		reset->clkdm = pdata->clkdm_lookup(buf);
+		if (!reset->clkdm)
+			return -EINVAL;
+	}
+
 	while (map->rst >= 0) {
 		reset->mask |= BIT(map->rst);
 		map++;
diff --git a/include/linux/platform_data/ti-prm.h b/include/linux/platform_data/ti-prm.h
new file mode 100644
index 000000000000..28154c3226c2
--- /dev/null
+++ b/include/linux/platform_data/ti-prm.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * TI PRM (Power & Reset Manager) platform data
+ *
+ * Copyright (C) 2019 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ */
+
+#ifndef _LINUX_PLATFORM_DATA_TI_PRM_H
+#define _LINUX_PLATFORM_DATA_TI_PRM_H
+
+struct clockdomain;
+
+struct ti_prm_platform_data {
+	void (*clkdm_deny_idle)(struct clockdomain *clkdm);
+	void (*clkdm_allow_idle)(struct clockdomain *clkdm);
+	struct clockdomain * (*clkdm_lookup)(const char *name);
+};
+
+#endif /* _LINUX_PLATFORM_DATA_TI_PRM_H */
-- 
2.17.1

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCHv8 5/9] soc: ti: omap-prm: add omap4 PRM data

[Tero Kristo]

Add PRM data for omap4 family of SoCs. Initially this is just used to
provide reset support.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 drivers/soc/ti/omap_prm.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c
index 3d9393ff67e3..24b1da3492c0 100644
--- a/drivers/soc/ti/omap_prm.c
+++ b/drivers/soc/ti/omap_prm.c
@@ -58,7 +58,29 @@ struct omap_reset_data {
 
 #define OMAP_PRM_HAS_RESETS	(OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_RSTST)
 
+static const struct omap_rst_map rst_map_01[] = {
+	{ .rst = 0, .st = 0 },
+	{ .rst = 1, .st = 1 },
+	{ .rst = -1 },
+};
+
+static const struct omap_rst_map rst_map_012[] = {
+	{ .rst = 0, .st = 0 },
+	{ .rst = 1, .st = 1 },
+	{ .rst = 2, .st = 2 },
+	{ .rst = -1 },
+};
+
+static const struct omap_prm_data omap4_prm_data[] = {
+	{ .name = "tesla", .base = 0x4a306400, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 },
+	{ .name = "core", .base = 0x4a306700, .rstctrl = 0x210, .rstst = 0x214, .clkdm_name = "ducati", .rstmap = rst_map_012 },
+	{ .name = "ivahd", .base = 0x4a306f00, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_012 },
+	{ .name = "device", .base = 0x4a307b00, .rstctrl = 0x0, .rstst = 0x4, .rstmap = rst_map_01, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM },
+	{ },
+};
+
 static const struct of_device_id omap_prm_id_table[] = {
+	{ .compatible = "ti,omap4-prm-inst", .data = omap4_prm_data },
 	{ },
 };
 
-- 
2.17.1

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCHv8 6/9] soc: ti: omap-prm: add data for am33xx

[Tero Kristo]

Add PRM instance data for AM33xx SoC. Includes some basic register
definitions and reset data for now.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 drivers/soc/ti/omap_prm.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c
index 24b1da3492c0..a5fde34f6afd 100644
--- a/drivers/soc/ti/omap_prm.c
+++ b/drivers/soc/ti/omap_prm.c
@@ -58,6 +58,11 @@ struct omap_reset_data {
 
 #define OMAP_PRM_HAS_RESETS	(OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_RSTST)
 
+static const struct omap_rst_map rst_map_0[] = {
+	{ .rst = 0, .st = 0 },
+	{ .rst = -1 },
+};
+
 static const struct omap_rst_map rst_map_01[] = {
 	{ .rst = 0, .st = 0 },
 	{ .rst = 1, .st = 1 },
@@ -79,8 +84,27 @@ static const struct omap_prm_data omap4_prm_data[] = {
 	{ },
 };
 
+static const struct omap_rst_map am3_per_rst_map[] = {
+	{ .rst = 1 },
+	{ .rst = -1 },
+};
+
+static const struct omap_rst_map am3_wkup_rst_map[] = {
+	{ .rst = 3, .st = 5 },
+	{ .rst = -1 },
+};
+
+static const struct omap_prm_data am3_prm_data[] = {
+	{ .name = "per", .base = 0x44e00c00, .rstctrl = 0x0, .rstmap = am3_per_rst_map, .flags = OMAP_PRM_HAS_RSTCTRL, .clkdm_name = "pruss_ocp" },
+	{ .name = "wkup", .base = 0x44e00d00, .rstctrl = 0x0, .rstst = 0xc, .rstmap = am3_wkup_rst_map, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM },
+	{ .name = "device", .base = 0x44e00f00, .rstctrl = 0x0, .rstst = 0x8, .rstmap = rst_map_01, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM },
+	{ .name = "gfx", .base = 0x44e01100, .rstctrl = 0x4, .rstst = 0x14, .rstmap = rst_map_0, .clkdm_name = "gfx_l3" },
+	{ },
+};
+
 static const struct of_device_id omap_prm_id_table[] = {
 	{ .compatible = "ti,omap4-prm-inst", .data = omap4_prm_data },
+	{ .compatible = "ti,am3-prm-inst", .data = am3_prm_data },
 	{ },
 };
 
-- 
2.17.1

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCHv8 7/9] soc: ti: omap-prm: add dra7 PRM data

[Tero Kristo]

Add PRM instance data for dra7 family of SoCs. Initially this is just
used to provide reset support.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 drivers/soc/ti/omap_prm.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c
index a5fde34f6afd..de11ce08ff7b 100644
--- a/drivers/soc/ti/omap_prm.c
+++ b/drivers/soc/ti/omap_prm.c
@@ -84,6 +84,19 @@ static const struct omap_prm_data omap4_prm_data[] = {
 	{ },
 };
 
+static const struct omap_prm_data dra7_prm_data[] = {
+	{ .name = "dsp1", .base = 0x4ae06400, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 },
+	{ .name = "ipu", .base = 0x4ae06500, .rstctrl = 0x10, .rstst = 0x14, .clkdm_name = "ipu1", .rstmap = rst_map_012 },
+	{ .name = "core", .base = 0x4ae06700, .rstctrl = 0x210, .rstst = 0x214, .clkdm_name = "ipu2", .rstmap = rst_map_012 },
+	{ .name = "iva", .base = 0x4ae06f00, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_012 },
+	{ .name = "dsp2", .base = 0x4ae07b00, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 },
+	{ .name = "eve1", .base = 0x4ae07b40, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 },
+	{ .name = "eve2", .base = 0x4ae07b80, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 },
+	{ .name = "eve3", .base = 0x4ae07bc0, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 },
+	{ .name = "eve4", .base = 0x4ae07c00, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 },
+	{ },
+};
+
 static const struct omap_rst_map am3_per_rst_map[] = {
 	{ .rst = 1 },
 	{ .rst = -1 },
@@ -104,6 +117,7 @@ static const struct omap_prm_data am3_prm_data[] = {
 
 static const struct of_device_id omap_prm_id_table[] = {
 	{ .compatible = "ti,omap4-prm-inst", .data = omap4_prm_data },
+	{ .compatible = "ti,dra7-prm-inst", .data = dra7_prm_data },
 	{ .compatible = "ti,am3-prm-inst", .data = am3_prm_data },
 	{ },
 };
-- 
2.17.1

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCHv8 8/9] soc: ti: omap-prm: add am4 PRM data

[Tero Kristo]

Add PRM instance data for am4 family of SoCs. Initially this is just
used to provide reset support.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 drivers/soc/ti/omap_prm.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c
index de11ce08ff7b..73ea64896770 100644
--- a/drivers/soc/ti/omap_prm.c
+++ b/drivers/soc/ti/omap_prm.c
@@ -115,10 +115,30 @@ static const struct omap_prm_data am3_prm_data[] = {
 	{ },
 };
 
+static const struct omap_rst_map am4_per_rst_map[] = {
+	{ .rst = 1, .st = 0 },
+	{ .rst = -1 },
+};
+
+static const struct omap_rst_map am4_device_rst_map[] = {
+	{ .rst = 0, .st = 1 },
+	{ .rst = 1, .st = 0 },
+	{ .rst = -1 },
+};
+
+static const struct omap_prm_data am4_prm_data[] = {
+	{ .name = "gfx", .base = 0x44df0400, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_0, .clkdm_name = "gfx_l3" },
+	{ .name = "per", .base = 0x44df0800, .rstctrl = 0x10, .rstst = 0x14, .rstmap = am4_per_rst_map, .clkdm_name = "pruss_ocp" },
+	{ .name = "wkup", .base = 0x44df2000, .rstctrl = 0x10, .rstst = 0x14, .rstmap = am3_wkup_rst_map, .flags = OMAP_PRM_HAS_NO_CLKDM },
+	{ .name = "device", .base = 0x44df4000, .rstctrl = 0x0, .rstst = 0x4, .rstmap = am4_device_rst_map, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM },
+	{ },
+};
+
 static const struct of_device_id omap_prm_id_table[] = {
 	{ .compatible = "ti,omap4-prm-inst", .data = omap4_prm_data },
 	{ .compatible = "ti,dra7-prm-inst", .data = dra7_prm_data },
 	{ .compatible = "ti,am3-prm-inst", .data = am3_prm_data },
+	{ .compatible = "ti,am4-prm-inst", .data = am4_prm_data },
 	{ },
 };
 
-- 
2.17.1

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCHv8 9/9] soc: ti: omap-prm: add omap5 PRM data

[Tero Kristo]

Add PRM instance data for omap5 family of SoCs. Initially this is just
used to provide reset support.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 drivers/soc/ti/omap_prm.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c
index 73ea64896770..38e8704c51ad 100644
--- a/drivers/soc/ti/omap_prm.c
+++ b/drivers/soc/ti/omap_prm.c
@@ -84,6 +84,14 @@ static const struct omap_prm_data omap4_prm_data[] = {
 	{ },
 };
 
+static const struct omap_prm_data omap5_prm_data[] = {
+	{ .name = "dsp", .base = 0x4ae06400, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 },
+	{ .name = "core", .base = 0x4ae06700, .rstctrl = 0x210, .rstst = 0x214, .clkdm_name = "ipu", .rstmap = rst_map_012 },
+	{ .name = "iva", .base = 0x4ae07200, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_012 },
+	{ .name = "device", .base = 0x4ae07c00, .rstctrl = 0x0, .rstst = 0x4, .rstmap = rst_map_01, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM },
+	{ },
+};
+
 static const struct omap_prm_data dra7_prm_data[] = {
 	{ .name = "dsp1", .base = 0x4ae06400, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 },
 	{ .name = "ipu", .base = 0x4ae06500, .rstctrl = 0x10, .rstst = 0x14, .clkdm_name = "ipu1", .rstmap = rst_map_012 },
@@ -136,6 +144,7 @@ static const struct omap_prm_data am4_prm_data[] = {
 
 static const struct of_device_id omap_prm_id_table[] = {
 	{ .compatible = "ti,omap4-prm-inst", .data = omap4_prm_data },
+	{ .compatible = "ti,omap5-prm-inst", .data = omap5_prm_data },
 	{ .compatible = "ti,dra7-prm-inst", .data = dra7_prm_data },
 	{ .compatible = "ti,am3-prm-inst", .data = am3_prm_data },
 	{ .compatible = "ti,am4-prm-inst", .data = am4_prm_data },
-- 
2.17.1

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCHv8 0/9] soc: ti: add OMAP PRM driver (for reset)

[Tony Lindgren]

* Tero Kristo <t-kristo@ti.com> [191008 05:56]:
> Hi,
> 
> Hopefully this is the final revision of the series. Just a repost of v7
> with the single comment from Philipp fixed, and added reviewed by tags
> from him for couple of the patches.

Santosh, when applying these, can you please provide me an immutable
branch maybe against v5.4-rc1 that I can use as the base for the related
dts changes?

For the whole series where not already done, please feel free to add:

Reviewed-by: Tony Lindgren <tony@atomide.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCHv8 1/9] dt-bindings: omap: add new binding for PRM instances

[Sebastian Reichel]

[-- Attachment #1.1: Type: text/plain, Size: 256 bytes --]

Hi,

On Tue, Oct 08, 2019 at 03:55:36PM +0300, Tero Kristo wrote:
> +Example:
> +
> +prm_dsp2: prm@1b00 {
> +	compatible = "ti,omap-prm-inst", "ti,dra7-prm-inst";

Nit: compatible values are sorted the other way around (most
specific first).

-- Sebastian

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCHv8 1/9] dt-bindings: omap: add new binding for PRM instances

[Tero Kristo]

On 08/10/2019 18:46, Sebastian Reichel wrote:
> Hi,
> 
> On Tue, Oct 08, 2019 at 03:55:36PM +0300, Tero Kristo wrote:
>> +Example:
>> +
>> +prm_dsp2: prm@1b00 {
>> +	compatible = "ti,omap-prm-inst", "ti,dra7-prm-inst";
> 
> Nit: compatible values are sorted the other way around (most
> specific first).

Hmm right, I would not like to re-post the whole series just for this 
seeing all the acks are in place already.

Santosh, do you want to fix this locally or shall we post a separate 
patch later on to fix this?

-Tero
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCHv8 1/9] dt-bindings: omap: add new binding for PRM instances

[santosh.shilimkar]

On 10/8/19 11:52 PM, Tero Kristo wrote:
> On 08/10/2019 18:46, Sebastian Reichel wrote:
>> Hi,
>>
>> On Tue, Oct 08, 2019 at 03:55:36PM +0300, Tero Kristo wrote:
>>> +Example:
>>> +
>>> +prm_dsp2: prm@1b00 {
>>> +    compatible = "ti,omap-prm-inst", "ti,dra7-prm-inst";
>>
>> Nit: compatible values are sorted the other way around (most
>> specific first).
> 
> Hmm right, I would not like to re-post the whole series just for this 
> seeing all the acks are in place already.
> 
> Santosh, do you want to fix this locally or shall we post a separate 
> patch later on to fix this?
> 
No need. I fixed it up. Pls check.

git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git 
for_5.5/driver-soc

Regards,
Santosh

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCHv8 0/9] soc: ti: add OMAP PRM driver (for reset)

[santosh.shilimkar]

On 10/8/19 7:00 AM, Tony Lindgren wrote:
> * Tero Kristo <t-kristo@ti.com> [191008 05:56]:
>> Hi,
>>
>> Hopefully this is the final revision of the series. Just a repost of v7
>> with the single comment from Philipp fixed, and added reviewed by tags
>> from him for couple of the patches.
> 
> Santosh, when applying these, can you please provide me an immutable
> branch maybe against v5.4-rc1 that I can use as the base for the related
> dts changes?
> 
> For the whole series where not already done, please feel free to add:
> 
> Reviewed-by: Tony Lindgren <tony@atomide.com>
> 
Pushed a branch out with series and your reviewed-by tag. I have tagged
it yet in case Peter's soc patches get ready.

git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git 
for_5.5/driver-soc

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCHv8 0/9] soc: ti: add OMAP PRM driver (for reset)

[Tony Lindgren]

* santosh.shilimkar@oracle.com <santosh.shilimkar@oracle.com> [191009 09:02]:
> On 10/8/19 7:00 AM, Tony Lindgren wrote:
> > * Tero Kristo <t-kristo@ti.com> [191008 05:56]:
> > > Hi,
> > > 
> > > Hopefully this is the final revision of the series. Just a repost of v7
> > > with the single comment from Philipp fixed, and added reviewed by tags
> > > from him for couple of the patches.
> > 
> > Santosh, when applying these, can you please provide me an immutable
> > branch maybe against v5.4-rc1 that I can use as the base for the related
> > dts changes?
> > 
> > For the whole series where not already done, please feel free to add:
> > 
> > Reviewed-by: Tony Lindgren <tony@atomide.com>
> > 
> Pushed a branch out with series and your reviewed-by tag. I have tagged
> it yet in case Peter's soc patches get ready.
> 
> git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git
> for_5.5/driver-soc

Great, thanks!

Tony

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCHv8 1/9] dt-bindings: omap: add new binding for PRM instances

[Tero Kristo]

On 09/10/2019 18:59, santosh.shilimkar@oracle.com wrote:
> 
> 
> On 10/8/19 11:52 PM, Tero Kristo wrote:
>> On 08/10/2019 18:46, Sebastian Reichel wrote:
>>> Hi,
>>>
>>> On Tue, Oct 08, 2019 at 03:55:36PM +0300, Tero Kristo wrote:
>>>> +Example:
>>>> +
>>>> +prm_dsp2: prm@1b00 {
>>>> +    compatible = "ti,omap-prm-inst", "ti,dra7-prm-inst";
>>>
>>> Nit: compatible values are sorted the other way around (most
>>> specific first).
>>
>> Hmm right, I would not like to re-post the whole series just for this 
>> seeing all the acks are in place already.
>>
>> Santosh, do you want to fix this locally or shall we post a separate 
>> patch later on to fix this?
>>
> No need. I fixed it up. Pls check.
> 
> git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git for_5.5/driver-soc 

Yeah, looks fine to me.

Thanks,
Tero
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel