From: Andrew Murray <andrew.murray@arm.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Ley Foon Tan <lftan@altera.com>,
Jesper Nilsson <jesper.nilsson@axis.com>,
Tom Joseph <tjoseph@cadence.com>,
Richard Zhu <hongxing.zhu@nxp.com>,
Lucas Stach <l.stach@pengutronix.de>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Zhou Wang <wangzhou1@hisilicon.com>,
Will Deacon <will@kernel.org>,
Xiaowei Song <songxiaowei@hisilicon.com>,
Binghui Wang <wangbinghui@hisilicon.com>,
Ryder Lee <ryder.lee@mediatek.com>,
Karthikeyan Mitran <m.karthikeyan@mobiveil.co.in>,
Hou Zhiqiang <Zhiqiang.Hou@nxp.com>,
David Daney <david.daney@cavium.com>,
Jonathan Chocron <jonnyc@amazon.com>,
Andy Gross <agross@kernel.org>,
Shawn Lin <shawn.lin@rock-chips.com>,
Heiko Stuebner <heiko@sntech.de>,
Kishon Vijay Abraham I <kishon@ti.com>,
Kunihiko Hayashi <hayashi.kunihiko@socionext.com>,
Masahiro Yamada <yamada.masahiro@socionext.com>,
Linus Walleij <linus.walleij@linaro.org>,
Toan Le <toan@os.amperecomputing.com>,
Michal Simek <michal.simek@xilinx.com>,
Matthias Brugger <matthias.bgg@gmail.com>
Cc: devicetree@vger.kernel.org, linux-pci@vger.kernel.org,
rfi@lists.rocketboards.org, linux-arm-kernel@axis.com,
linux-rockchip@lists.infradead.org,
linux-mediatek@lists.infradead.org,
NXP Linux Team <linux-imx@nxp.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
linux-arm-msm@vger.kernel.org, linux-omap@vger.kernel.org,
Fabio Estevam <festevam@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v1 7/7] dt-bindings: PCI: Use IRQ flags for legacy PCI IRQ interrupts
Date: Mon, 4 Nov 2019 16:38:21 +0000 [thread overview]
Message-ID: <20191104163834.8932-8-andrew.murray@arm.com> (raw)
In-Reply-To: <20191104163834.8932-1-andrew.murray@arm.com>
Replace magic numbers used to describe legacy PCI IRQ interrupts
with #define.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
---
.../devicetree/bindings/pci/83xx-512x-pci.txt | 18 ++---
.../devicetree/bindings/pci/aardvark-pci.txt | 10 +--
.../devicetree/bindings/pci/altera-pcie.txt | 10 +--
.../bindings/pci/axis,artpec6-pcie.txt | 10 +--
.../bindings/pci/cdns,cdns-pcie-host.txt | 10 +--
.../bindings/pci/faraday,ftpci100.txt | 68 +++++++++----------
.../bindings/pci/fsl,imx6q-pcie.txt | 10 +--
.../bindings/pci/hisilicon-pcie.txt | 20 +++---
.../bindings/pci/host-generic-pci.txt | 10 +--
.../devicetree/bindings/pci/kirin-pcie.txt | 10 +--
.../bindings/pci/layerscape-pci.txt | 10 +--
.../devicetree/bindings/pci/mediatek-pcie.txt | 40 +++++------
.../devicetree/bindings/pci/mobiveil-pcie.txt | 8 +--
.../devicetree/bindings/pci/pci-rcar-gen2.txt | 8 +--
.../bindings/pci/pci-thunder-pem.txt | 10 +--
.../devicetree/bindings/pci/pcie-al.txt | 4 +-
.../devicetree/bindings/pci/qcom,pcie.txt | 20 +++---
.../bindings/pci/ralink,rt3883-pci.txt | 18 ++---
.../bindings/pci/rockchip-pcie-host.txt | 10 +--
.../devicetree/bindings/pci/ti-pci.txt | 10 +--
.../devicetree/bindings/pci/uniphier-pcie.txt | 10 +--
.../bindings/pci/v3-v360epc-pci.txt | 34 +++++-----
.../devicetree/bindings/pci/versatile.txt | 40 +++++------
.../devicetree/bindings/pci/xgene-pci-msi.txt | 10 +--
.../devicetree/bindings/pci/xgene-pci.txt | 10 +--
.../bindings/pci/xilinx-nwl-pcie.txt | 10 +--
.../devicetree/bindings/pci/xilinx-pcie.txt | 20 +++---
27 files changed, 224 insertions(+), 224 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt b/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt
index 3abeecf4983f..cb80b9e49a2b 100644
--- a/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt
+++ b/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt
@@ -9,19 +9,19 @@ Freescale 83xx and 512x SOCs include the same PCI bridge core.
Example (MPC8313ERDB)
pci0: pci@e0008500 {
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 IRQ_INT_ALL>;
interrupt-map = <
/* IDSEL 0x0E -mini PCI */
- 0x7000 0x0 0x0 0x1 &ipic 18 0x8
- 0x7000 0x0 0x0 0x2 &ipic 18 0x8
- 0x7000 0x0 0x0 0x3 &ipic 18 0x8
- 0x7000 0x0 0x0 0x4 &ipic 18 0x8
+ 0x7000 0x0 0x0 IRQ_INTA &ipic 18 0x8
+ 0x7000 0x0 0x0 IRQ_INTB &ipic 18 0x8
+ 0x7000 0x0 0x0 IRQ_INTC &ipic 18 0x8
+ 0x7000 0x0 0x0 IRQ_INTD &ipic 18 0x8
/* IDSEL 0x0F - PCI slot */
- 0x7800 0x0 0x0 0x1 &ipic 17 0x8
- 0x7800 0x0 0x0 0x2 &ipic 18 0x8
- 0x7800 0x0 0x0 0x3 &ipic 17 0x8
- 0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
+ 0x7800 0x0 0x0 IRQ_INTA &ipic 17 0x8
+ 0x7800 0x0 0x0 IRQ_INTB &ipic 18 0x8
+ 0x7800 0x0 0x0 IRQ_INTC &ipic 17 0x8
+ 0x7800 0x0 0x0 IRQ_INTD &ipic 18 0x8>;
interrupt-parent = <&ipic>;
interrupts = <66 0x8>;
bus-range = <0x0 0x0>;
diff --git a/Documentation/devicetree/bindings/pci/aardvark-pci.txt b/Documentation/devicetree/bindings/pci/aardvark-pci.txt
index 310ef7145c47..ca8fe542edc9 100644
--- a/Documentation/devicetree/bindings/pci/aardvark-pci.txt
+++ b/Documentation/devicetree/bindings/pci/aardvark-pci.txt
@@ -43,11 +43,11 @@ Example:
msi-parent = <&pcie0>;
ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x1000000 /* Port 0 MEM */
0x81000000 0 0xe9000000 0 0xe9000000 0 0x10000>; /* Port 0 IO*/
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie_intc 0>,
- <0 0 0 2 &pcie_intc 1>,
- <0 0 0 3 &pcie_intc 2>,
- <0 0 0 4 &pcie_intc 3>;
+ interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+ interrupt-map = <0 0 0 IRQ_INTA &pcie_intc 0>,
+ <0 0 0 IRQ_INTB &pcie_intc 1>,
+ <0 0 0 IRQ_INTC &pcie_intc 2>,
+ <0 0 0 IRQ_INTD &pcie_intc 3>;
pcie_intc: interrupt-controller {
interrupt-controller;
#interrupt-cells = <1>;
diff --git a/Documentation/devicetree/bindings/pci/altera-pcie.txt b/Documentation/devicetree/bindings/pci/altera-pcie.txt
index 816b244a221e..f9902dca1a03 100644
--- a/Documentation/devicetree/bindings/pci/altera-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/altera-pcie.txt
@@ -40,11 +40,11 @@ Example
msi-parent = <&msi_to_gic_gen_0>;
#address-cells = <3>;
#size-cells = <2>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie_0 1>,
- <0 0 0 2 &pcie_0 2>,
- <0 0 0 3 &pcie_0 3>,
- <0 0 0 4 &pcie_0 4>;
+ interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+ interrupt-map = <0 0 0 IRQ_INTA &pcie_0 1>,
+ <0 0 0 IRQ_INTB &pcie_0 2>,
+ <0 0 0 IRQ_INTC &pcie_0 3>,
+ <0 0 0 IRQ_INTD &pcie_0 4>;
ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000
0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>;
};
diff --git a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
index 979dc7b6cfe8..c71dbe94f0eb 100644
--- a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
@@ -41,10 +41,10 @@ Example:
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+ interrupt-map = <0 0 0 IRQ_INTA &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 IRQ_INTB &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 IRQ_INTC &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 IRQ_INTD &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
axis,syscon-pcie = <&syscon>;
};
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
index 91de69c713a9..67845103c8f0 100644
--- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
+++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
@@ -52,12 +52,12 @@ pcie@fb000000 {
#interrupt-cells = <0x1>;
- interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 14 0x1
- 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 15 0x1
- 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 16 0x1
- 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 17 0x1>;
+ interrupt-map = <0x0 0x0 0x0 IRQ_INTA &gic 0x0 0x0 0x0 14 0x1
+ 0x0 0x0 0x0 IRQ_INTB &gic 0x0 0x0 0x0 15 0x1
+ 0x0 0x0 0x0 IRQ_INTC &gic 0x0 0x0 0x0 16 0x1
+ 0x0 0x0 0x0 IRQ_INTD &gic 0x0 0x0 0x0 17 0x1>;
- interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map-mask = <0x0 0x0 0x0 IRQ_INT_ALL>;
msi-parent = <&its_pci>;
diff --git a/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt b/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt
index 5f8cb4962f8d..b267d4853773 100644
--- a/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt
+++ b/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt
@@ -61,24 +61,24 @@ variant) interrupts assigns the default interrupt mapping/swizzling has
typically been like this, doing the swizzling on the interrupt controller side
rather than in the interconnect:
-interrupt-map-mask = <0xf800 0 0 7>;
+interrupt-map-mask = <0xf800 0 0 IRQ_INT_ALL>;
interrupt-map =
- <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
- <0x4800 0 0 2 &pci_intc 1>,
- <0x4800 0 0 3 &pci_intc 2>,
- <0x4800 0 0 4 &pci_intc 3>,
- <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
- <0x5000 0 0 2 &pci_intc 2>,
- <0x5000 0 0 3 &pci_intc 3>,
- <0x5000 0 0 4 &pci_intc 0>,
- <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
- <0x5800 0 0 2 &pci_intc 3>,
- <0x5800 0 0 3 &pci_intc 0>,
- <0x5800 0 0 4 &pci_intc 1>,
- <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
- <0x6000 0 0 2 &pci_intc 0>,
- <0x6000 0 0 3 &pci_intc 1>,
- <0x6000 0 0 4 &pci_intc 2>;
+ <0x4800 0 0 IRQ_INTA &pci_intc 0>, /* Slot 9 */
+ <0x4800 0 0 IRQ_INTB &pci_intc 1>,
+ <0x4800 0 0 IRQ_INTC &pci_intc 2>,
+ <0x4800 0 0 IRQ_INTD &pci_intc 3>,
+ <0x5000 0 0 IRQ_INTA &pci_intc 1>, /* Slot 10 */
+ <0x5000 0 0 IRQ_INTB &pci_intc 2>,
+ <0x5000 0 0 IRQ_INTC &pci_intc 3>,
+ <0x5000 0 0 IRQ_INTD &pci_intc 0>,
+ <0x5800 0 0 IRQ_INTA &pci_intc 2>, /* Slot 11 */
+ <0x5800 0 0 IRQ_INTB &pci_intc 3>,
+ <0x5800 0 0 IRQ_INTC &pci_intc 0>,
+ <0x5800 0 0 IRQ_INTD &pci_intc 1>,
+ <0x6000 0 0 IRQ_INTA &pci_intc 3>, /* Slot 12 */
+ <0x6000 0 0 IRQ_INTB &pci_intc 0>,
+ <0x6000 0 0 IRQ_INTC &pci_intc 1>,
+ <0x6000 0 0 IRQ_INTD &pci_intc 2>;
Example:
@@ -108,24 +108,24 @@ pci@50000000 {
/* 64MiB at 0x00000000-0x03ffffff */
<0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
- interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map-mask = <0xf800 0 0 IRQ_INT_ALL>;
interrupt-map =
- <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
- <0x4800 0 0 2 &pci_intc 1>,
- <0x4800 0 0 3 &pci_intc 2>,
- <0x4800 0 0 4 &pci_intc 3>,
- <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
- <0x5000 0 0 2 &pci_intc 2>,
- <0x5000 0 0 3 &pci_intc 3>,
- <0x5000 0 0 4 &pci_intc 0>,
- <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
- <0x5800 0 0 2 &pci_intc 3>,
- <0x5800 0 0 3 &pci_intc 0>,
- <0x5800 0 0 4 &pci_intc 1>,
- <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
- <0x6000 0 0 2 &pci_intc 0>,
- <0x6000 0 0 3 &pci_intc 0>,
- <0x6000 0 0 4 &pci_intc 0>;
+ <0x4800 0 0 IRQ_INTA &pci_intc 0>, /* Slot 9 */
+ <0x4800 0 0 IRQ_INTB &pci_intc 1>,
+ <0x4800 0 0 IRQ_INTC &pci_intc 2>,
+ <0x4800 0 0 IRQ_INTD &pci_intc 3>,
+ <0x5000 0 0 IRQ_INTA &pci_intc 1>, /* Slot 10 */
+ <0x5000 0 0 IRQ_INTB &pci_intc 2>,
+ <0x5000 0 0 IRQ_INTC &pci_intc 3>,
+ <0x5000 0 0 IRQ_INTD &pci_intc 0>,
+ <0x5800 0 0 IRQ_INTA &pci_intc 2>, /* Slot 11 */
+ <0x5800 0 0 IRQ_INTB &pci_intc 3>,
+ <0x5800 0 0 IRQ_INTC &pci_intc 0>,
+ <0x5800 0 0 IRQ_INTD &pci_intc 1>,
+ <0x6000 0 0 IRQ_INTA &pci_intc 3>, /* Slot 12 */
+ <0x6000 0 0 IRQ_INTB &pci_intc 0>,
+ <0x6000 0 0 IRQ_INTC &pci_intc 0>,
+ <0x6000 0 0 IRQ_INTD &pci_intc 0>;
pci_intc: interrupt-controller {
interrupt-parent = <&intcon>;
interrupt-controller;
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
index de4b2baf91e8..dc331885124a 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
@@ -77,11 +77,11 @@ Example:
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+ interrupt-map = <0 0 0 IRQ_INTA &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 IRQ_INTB &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 IRQ_INTC &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 IRQ_INTD &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 144>, <&clks 206>, <&clks 189>;
clock-names = "pcie", "pcie_bus", "pcie_phy";
};
diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
index 0dcb87d6554f..3e809c7d9b07 100644
--- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
@@ -35,11 +35,11 @@ Hip05 Example (note that Hip06 is the same except compatible):
num-lanes = <8>;
port-id = <1>;
#interrupt-cells = <1>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <0x0 0 0 1 &mbigen_pcie 1 10
- 0x0 0 0 2 &mbigen_pcie 2 11
- 0x0 0 0 3 &mbigen_pcie 3 12
- 0x0 0 0 4 &mbigen_pcie 4 13>;
+ interrupt-map-mask = <0xf800 0 0 IRQ_INT_ALL>;
+ interrupt-map = <0x0 0 0 IRQ_INTA &mbigen_pcie 1 10
+ 0x0 0 0 IRQ_INTB &mbigen_pcie 2 11
+ 0x0 0 0 IRQ_INTC &mbigen_pcie 3 12
+ 0x0 0 0 IRQ_INTD &mbigen_pcie 4 13>;
};
HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description.
@@ -77,9 +77,9 @@ Example:
ranges = <0x02000000 0 0xb2000000 0x0 0xb2000000 0 0x5ff0000
0x01000000 0 0 0 0xb7ff0000 0 0x10000>;
#interrupt-cells = <1>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <0x0 0 0 1 &mbigen_pcie0 650 4
- 0x0 0 0 2 &mbigen_pcie0 650 4
- 0x0 0 0 3 &mbigen_pcie0 650 4
- 0x0 0 0 4 &mbigen_pcie0 650 4>;
+ interrupt-map-mask = <0xf800 0 0 IRQ_INT_ALL>;
+ interrupt-map = <0x0 0 0 IRQ_INTA &mbigen_pcie0 650 4
+ 0x0 0 0 IRQ_INTB &mbigen_pcie0 650 4
+ 0x0 0 0 IRQ_INTC &mbigen_pcie0 650 4
+ 0x0 0 0 IRQ_INTD &mbigen_pcie0 650 4>;
};
diff --git a/Documentation/devicetree/bindings/pci/host-generic-pci.txt b/Documentation/devicetree/bindings/pci/host-generic-pci.txt
index 614b594f4e72..51a56ad3f1a9 100644
--- a/Documentation/devicetree/bindings/pci/host-generic-pci.txt
+++ b/Documentation/devicetree/bindings/pci/host-generic-pci.txt
@@ -91,11 +91,11 @@ pci {
#interrupt-cells = <0x1>;
// PCI_DEVICE(3) INT#(1) CONTROLLER(PHANDLE) CONTROLLER_DATA(3)
- interrupt-map = < 0x0 0x0 0x0 0x1 &gic 0x0 0x4 0x1
- 0x800 0x0 0x0 0x1 &gic 0x0 0x5 0x1
- 0x1000 0x0 0x0 0x1 &gic 0x0 0x6 0x1
- 0x1800 0x0 0x0 0x1 &gic 0x0 0x7 0x1>;
+ interrupt-map = < 0x0 0x0 0x0 IRQ_INTA &gic 0x0 0x4 0x1
+ 0x800 0x0 0x0 IRQ_INTA &gic 0x0 0x5 0x1
+ 0x1000 0x0 0x0 IRQ_INTA &gic 0x0 0x6 0x1
+ 0x1800 0x0 0x0 IRQ_INTA &gic 0x0 0x7 0x1>;
// PCI_DEVICE(3) INT#(1)
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 IRQ_MAP_ALL>;
}
diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
index 6bbe43818ad5..7da640d6578e 100644
--- a/Documentation/devicetree/bindings/pci/kirin-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
@@ -34,11 +34,11 @@ Example based on kirin960:
ranges = <0x02000000 0x0 0x00000000 0x0 0xf5000000 0x0 0x2000000>;
num-lanes = <1>;
#interrupt-cells = <1>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <0x0 0 0 1 &gic 0 0 0 282 4>,
- <0x0 0 0 2 &gic 0 0 0 283 4>,
- <0x0 0 0 3 &gic 0 0 0 284 4>,
- <0x0 0 0 4 &gic 0 0 0 285 4>;
+ interrupt-map-mask = <0xf800 0 0 IRQ_INT_ALL>;
+ interrupt-map = <0x0 0 0 IRQ_INTA &gic 0 0 0 282 4>,
+ <0x0 0 0 IRQ_INTB &gic 0 0 0 283 4>,
+ <0x0 0 0 IRQ_INTC &gic 0 0 0 284 4>,
+ <0x0 0 0 IRQ_INTD &gic 0 0 0 285 4>;
clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
<&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
<&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index e20ceaab9b38..1016e9f8982a 100644
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -56,9 +56,9 @@ Example:
0xc2000000 0x0 0x20000000 0x40 0x20000000 0x0 0x20000000 /* prefetchable memory */
0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
#interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0000 0 0 1 &gic GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
- <0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
- <0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
- <0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+ interrupt-map = <0000 0 0 IRQ_INTA &gic GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 IRQ_INTB &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 IRQ_INTC &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 IRQ_INTD &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
};
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
index 7468d666763a..00728cdad957 100644
--- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
@@ -169,11 +169,11 @@ Examples for MT2712:
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie_intc0 0>,
- <0 0 0 2 &pcie_intc0 1>,
- <0 0 0 3 &pcie_intc0 2>,
- <0 0 0 4 &pcie_intc0 3>;
+ interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+ interrupt-map = <0 0 0 IRQ_INTA &pcie_intc0 0>,
+ <0 0 0 IRQ_INTB &pcie_intc0 1>,
+ <0 0 0 IRQ_INTC &pcie_intc0 2>,
+ <0 0 0 IRQ_INTD &pcie_intc0 3>;
pcie_intc0: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
@@ -187,11 +187,11 @@ Examples for MT2712:
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie_intc1 0>,
- <0 0 0 2 &pcie_intc1 1>,
- <0 0 0 3 &pcie_intc1 2>,
- <0 0 0 4 &pcie_intc1 3>;
+ interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+ interrupt-map = <0 0 0 IRQ_INTA &pcie_intc1 0>,
+ <0 0 0 IRQ_INTB &pcie_intc1 1>,
+ <0 0 0 IRQ_INTC &pcie_intc1 2>,
+ <0 0 0 IRQ_INTD &pcie_intc1 3>;
pcie_intc1: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
@@ -240,11 +240,11 @@ Examples for MT7622:
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie_intc0 0>,
- <0 0 0 2 &pcie_intc0 1>,
- <0 0 0 3 &pcie_intc0 2>,
- <0 0 0 4 &pcie_intc0 3>;
+ interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+ interrupt-map = <0 0 0 IRQ_INTA &pcie_intc0 0>,
+ <0 0 0 IRQ_INTB &pcie_intc0 1>,
+ <0 0 0 IRQ_INTC &pcie_intc0 2>,
+ <0 0 0 IRQ_INTD &pcie_intc0 3>;
pcie_intc0: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
@@ -258,11 +258,11 @@ Examples for MT7622:
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie_intc1 0>,
- <0 0 0 2 &pcie_intc1 1>,
- <0 0 0 3 &pcie_intc1 2>,
- <0 0 0 4 &pcie_intc1 3>;
+ interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+ interrupt-map = <0 0 0 IRQ_INTA &pcie_intc1 0>,
+ <0 0 0 IRQ_INTB &pcie_intc1 1>,
+ <0 0 0 IRQ_INTC &pcie_intc1 2>,
+ <0 0 0 IRQ_INTD &pcie_intc1 3>;
pcie_intc1: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
diff --git a/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
index 64156993e052..03070b3bfda1 100644
--- a/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
@@ -62,11 +62,11 @@ Example:
interrupt-parent = <&gic>;
#interrupt-cells = <1>;
interrupts = < 0 89 4 >;
- interrupt-map-mask = <0 0 0 7>;
+ interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
interrupt-map = <0 0 0 0 &pci_express 0>,
- <0 0 0 1 &pci_express 1>,
- <0 0 0 2 &pci_express 2>,
- <0 0 0 3 &pci_express 3>;
+ <0 0 0 IRQ_INTA &pci_express 1>,
+ <0 0 0 IRQ_INTB &pci_express 2>,
+ <0 0 0 IRQ_INTC &pci_express 3>;
ranges = < 0x83000000 0 0x00000000 0xa8000000 0 0x8000000>;
};
diff --git a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
index b94078f58d8e..7c6a19e0b131 100644
--- a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
+++ b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
@@ -56,10 +56,10 @@ Example SoC configuration:
#size-cells = <2>;
#interrupt-cells = <1>;
dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
- interrupt-map-mask = <0xff00 0 0 0x7>;
- interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
- 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
- 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xff00 0 0 IRQ_INT_ALL>;
+ interrupt-map = <0x0000 0 0 IRQ_INTA &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 IRQ_INTA &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 IRQ_INTB &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
usb@1,0 {
reg = <0x800 0 0 0 0>;
diff --git a/Documentation/devicetree/bindings/pci/pci-thunder-pem.txt b/Documentation/devicetree/bindings/pci/pci-thunder-pem.txt
index f131faea3b7c..edfaedfe8c8c 100644
--- a/Documentation/devicetree/bindings/pci/pci-thunder-pem.txt
+++ b/Documentation/devicetree/bindings/pci/pci-thunder-pem.txt
@@ -35,9 +35,9 @@ Example:
<0x03000000 0x87e0 0xc2f00000 0x87e0 0xc2000000 0x00 0x00100000>; /* mem64 PEM BAR4 */
#interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &gic0 0 0 0 24 4>, /* INTA */
- <0 0 0 2 &gic0 0 0 0 25 4>, /* INTB */
- <0 0 0 3 &gic0 0 0 0 26 4>, /* INTC */
- <0 0 0 4 &gic0 0 0 0 27 4>; /* INTD */
+ interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+ interrupt-map = <0 0 0 IRQ_INTA &gic0 0 0 0 24 4>,
+ <0 0 0 IRQ_INTB &gic0 0 0 0 25 4>,
+ <0 0 0 IRQ_INTC &gic0 0 0 0 26 4>,
+ <0 0 0 IRQ_INTD &gic0 0 0 0 27 4>;
};
diff --git a/Documentation/devicetree/bindings/pci/pcie-al.txt b/Documentation/devicetree/bindings/pci/pcie-al.txt
index 557a5089229d..8bb3d935d3fa 100644
--- a/Documentation/devicetree/bindings/pci/pcie-al.txt
+++ b/Documentation/devicetree/bindings/pci/pcie-al.txt
@@ -40,7 +40,7 @@ Example:
#size-cells = <2>;
#interrupt-cells = <1>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-map-mask = <0x00 0 0 7>;
- interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; /* INTa */
+ interrupt-map-mask = <0x00 0 0 IRQ_INT_ALL>;
+ interrupt-map = <0x0000 0 0 IRQ_INTA &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
ranges = <0x02000000 0x0 0xc0010000 0x0 0xc0010000 0x0 0x07ff0000>;
};
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
index ada80b01bf0c..898599eed2e5 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
@@ -251,11 +251,11 @@
interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
interrupt-names = "msi";
#interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+ interrupt-map = <0 0 0 IRQ_INTA &intc 0 36 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 IRQ_INTB &intc 0 37 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 IRQ_INTC &intc 0 38 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 IRQ_INTD &intc 0 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc PCIE_A_CLK>,
<&gcc PCIE_H_CLK>,
<&gcc PCIE_PHY_CLK>;
@@ -289,11 +289,11 @@
interrupts = <GIC_SPI 243 IRQ_TYPE_NONE>;
interrupt-names = "msi";
#interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+ interrupt-map = <0 0 0 IRQ_INTA &intc 0 244 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 IRQ_INTB &intc 0 245 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 IRQ_INTC &intc 0 247 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 IRQ_INTD &intc 0 248 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_0_SLV_AXI_CLK>,
diff --git a/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
index ffba4f63d71f..09a4a28fb472 100644
--- a/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
+++ b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
@@ -131,18 +131,18 @@
0x01000000 0 0x00000000 0x10160000 0 0x00010000 /* io space */
>;
- interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map-mask = <0xf800 0 0 IRQ_INT_ALL>;
interrupt-map = <
/* IDSEL 17 */
- 0x8800 0 0 1 &pciintc 18
- 0x8800 0 0 2 &pciintc 18
- 0x8800 0 0 3 &pciintc 18
- 0x8800 0 0 4 &pciintc 18
+ 0x8800 0 0 IRQ_INTA &pciintc 18
+ 0x8800 0 0 IRQ_INTB &pciintc 18
+ 0x8800 0 0 IRQ_INTC &pciintc 18
+ 0x8800 0 0 IRQ_INTD &pciintc 18
/* IDSEL 18 */
- 0x9000 0 0 1 &pciintc 19
- 0x9000 0 0 2 &pciintc 19
- 0x9000 0 0 3 &pciintc 19
- 0x9000 0 0 4 &pciintc 19
+ 0x9000 0 0 IRQ_INTA &pciintc 19
+ 0x9000 0 0 IRQ_INTB &pciintc 19
+ 0x9000 0 0 IRQ_INTC &pciintc 19
+ 0x9000 0 0 IRQ_INTD &pciintc 19
>;
pci-bridge@1 {
diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie-host.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie-host.txt
index af34c65773fd..4538d18b4c3c 100644
--- a/Documentation/devicetree/bindings/pci/rockchip-pcie-host.txt
+++ b/Documentation/devicetree/bindings/pci/rockchip-pcie-host.txt
@@ -112,11 +112,11 @@ pcie0: pcie@f8000000 {
pinctrl-names = "default";
pinctrl-0 = <&pcie_clkreq>;
#interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie0_intc 0>,
- <0 0 0 2 &pcie0_intc 1>,
- <0 0 0 3 &pcie0_intc 2>,
- <0 0 0 4 &pcie0_intc 3>;
+ interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+ interrupt-map = <0 0 0 IRQ_INTA &pcie0_intc 0>,
+ <0 0 0 IRQ_INTB &pcie0_intc 1>,
+ <0 0 0 IRQ_INTC &pcie0_intc 2>,
+ <0 0 0 IRQ_INTD &pcie0_intc 3>;
pcie0_intc: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
index d5cbfe6b0d89..795b09755977 100644
--- a/Documentation/devicetree/bindings/pci/ti-pci.txt
+++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
@@ -88,11 +88,11 @@ axi {
ti,hwmods = "pcie1";
phys = <&pcie1_phy>;
phy-names = "pcie-phy0";
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie_intc 1>,
- <0 0 0 2 &pcie_intc 2>,
- <0 0 0 3 &pcie_intc 3>,
- <0 0 0 4 &pcie_intc 4>;
+ interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+ interrupt-map = <0 0 0 IRQ_INTA &pcie_intc 1>,
+ <0 0 0 IRQ_INTB &pcie_intc 2>,
+ <0 0 0 IRQ_INTC &pcie_intc 3>,
+ <0 0 0 IRQ_INTD &pcie_intc 4>;
pcie_intc: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
diff --git a/Documentation/devicetree/bindings/pci/uniphier-pcie.txt b/Documentation/devicetree/bindings/pci/uniphier-pcie.txt
index 1fa2c5906d4d..b5416798a638 100644
--- a/Documentation/devicetree/bindings/pci/uniphier-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/uniphier-pcie.txt
@@ -66,11 +66,11 @@ Example:
#interrupt-cells = <1>;
interrupt-names = "dma", "msi";
interrupts = <0 224 4>, <0 225 4>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie_intc 0>, /* INTA */
- <0 0 0 2 &pcie_intc 1>, /* INTB */
- <0 0 0 3 &pcie_intc 2>, /* INTC */
- <0 0 0 4 &pcie_intc 3>; /* INTD */
+ interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+ interrupt-map = <0 0 0 IRQ_INTA &pcie_intc 0>,
+ <0 0 0 IRQ_INTB &pcie_intc 1>,
+ <0 0 0 IRQ_INTC &pcie_intc 2>,
+ <0 0 0 IRQ_INTD &pcie_intc 3>;
pcie_intc: legacy-interrupt-controller {
interrupt-controller;
diff --git a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt
index 11063293f761..bfa37aa4933d 100644
--- a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt
+++ b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt
@@ -50,27 +50,27 @@ pci: pciv3@62000000 {
0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */
0x02000000 0 0x80000000 /* Core module alias memory */
0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */
- interrupt-map-mask = <0xf800 0 0 0x7>;
+ interrupt-map-mask = <0xf800 0 0 IRQ_INT_ALL>;
interrupt-map = <
/* IDSEL 9 */
- 0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */
- 0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */
- 0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */
- 0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */
+ 0x4800 0 0 IRQ_INTA &pic 13 /* INT A on slot 9 is irq 13 */
+ 0x4800 0 0 IRQ_INTB &pic 14 /* INT B on slot 9 is irq 14 */
+ 0x4800 0 0 IRQ_INTC &pic 15 /* INT C on slot 9 is irq 15 */
+ 0x4800 0 0 IRQ_INTD &pic 16 /* INT D on slot 9 is irq 16 */
/* IDSEL 10 */
- 0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */
- 0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */
- 0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */
- 0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */
+ 0x5000 0 0 IRQ_INTA &pic 14 /* INT A on slot 10 is irq 14 */
+ 0x5000 0 0 IRQ_INTB &pic 15 /* INT B on slot 10 is irq 15 */
+ 0x5000 0 0 IRQ_INTC &pic 16 /* INT C on slot 10 is irq 16 */
+ 0x5000 0 0 IRQ_INTD &pic 13 /* INT D on slot 10 is irq 13 */
/* IDSEL 11 */
- 0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */
- 0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */
- 0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */
- 0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */
+ 0x5800 0 0 IRQ_INTA &pic 15 /* INT A on slot 11 is irq 15 */
+ 0x5800 0 0 IRQ_INTB &pic 16 /* INT B on slot 11 is irq 16 */
+ 0x5800 0 0 IRQ_INTC &pic 13 /* INT C on slot 11 is irq 13 */
+ 0x5800 0 0 IRQ_INTD &pic 14 /* INT D on slot 11 is irq 14 */
/* IDSEL 12 */
- 0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */
- 0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */
- 0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */
- 0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */
+ 0x6000 0 0 IRQ_INTA &pic 16 /* INT A on slot 12 is irq 16 */
+ 0x6000 0 0 IRQ_INTB &pic 13 /* INT B on slot 12 is irq 13 */
+ 0x6000 0 0 IRQ_INTC &pic 14 /* INT C on slot 12 is irq 14 */
+ 0x6000 0 0 IRQ_INTD &pic 15 /* INT D on slot 12 is irq 15 */
>;
};
diff --git a/Documentation/devicetree/bindings/pci/versatile.txt b/Documentation/devicetree/bindings/pci/versatile.txt
index 0a702b13d2ac..a02c7b9683ac 100644
--- a/Documentation/devicetree/bindings/pci/versatile.txt
+++ b/Documentation/devicetree/bindings/pci/versatile.txt
@@ -36,24 +36,24 @@ pci-controller@10001000 {
0x02000000 0 0x50000000 0x50000000 0 0x10000000 /* non-prefetchable memory */
0x42000000 0 0x60000000 0x60000000 0 0x10000000>; /* prefetchable memory */
- interrupt-map-mask = <0x1800 0 0 7>;
- interrupt-map = <0x1800 0 0 1 &sic 28
- 0x1800 0 0 2 &sic 29
- 0x1800 0 0 3 &sic 30
- 0x1800 0 0 4 &sic 27
-
- 0x1000 0 0 1 &sic 27
- 0x1000 0 0 2 &sic 28
- 0x1000 0 0 3 &sic 29
- 0x1000 0 0 4 &sic 30
-
- 0x0800 0 0 1 &sic 30
- 0x0800 0 0 2 &sic 27
- 0x0800 0 0 3 &sic 28
- 0x0800 0 0 4 &sic 29
-
- 0x0000 0 0 1 &sic 29
- 0x0000 0 0 2 &sic 30
- 0x0000 0 0 3 &sic 27
- 0x0000 0 0 4 &sic 28>;
+ interrupt-map-mask = <0x1800 0 0 IRQ_INT_ALL>;
+ interrupt-map = <0x1800 0 0 IRQ_INTA &sic 28
+ 0x1800 0 0 IRQ_INTB &sic 29
+ 0x1800 0 0 IRQ_INTC &sic 30
+ 0x1800 0 0 IRQ_INTD &sic 27
+
+ 0x1000 0 0 IRQ_INTA &sic 27
+ 0x1000 0 0 IRQ_INTB &sic 28
+ 0x1000 0 0 IRQ_INTC &sic 29
+ 0x1000 0 0 IRQ_INTD &sic 30
+
+ 0x0800 0 0 IRQ_INTA &sic 30
+ 0x0800 0 0 IRQ_INTB &sic 27
+ 0x0800 0 0 IRQ_INTC &sic 28
+ 0x0800 0 0 IRQ_INTD &sic 29
+
+ 0x0000 0 0 IRQ_INTA &sic 29
+ 0x0000 0 0 IRQ_INTB &sic 30
+ 0x0000 0 0 IRQ_INTC &sic 27
+ 0x0000 0 0 IRQ_INTD &sic 28>;
};
diff --git a/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt
index 85d9b95234f7..0e84e6621b4a 100644
--- a/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt
+++ b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt
@@ -57,11 +57,11 @@ SoC DTSI:
0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
- interrupt-map-mask = <0x0 0x0 0x0 0x7>;
- interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
- 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
- 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
- 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
+ interrupt-map-mask = <0x0 0x0 0x0 IRQ_INT_ALL>;
+ interrupt-map = <0x0 0x0 0x0 IRQ_INTA &gic 0x0 0xc2 0x1
+ 0x0 0x0 0x0 IRQ_INTB &gic 0x0 0xc3 0x1
+ 0x0 0x0 0x0 IRQ_INTC &gic 0x0 0xc4 0x1
+ 0x0 0x0 0x0 IRQ_INTD &gic 0x0 0xc5 0x1>;
dma-coherent;
clocks = <&pcie0clk 0>;
msi-parent= <&msi>;
diff --git a/Documentation/devicetree/bindings/pci/xgene-pci.txt b/Documentation/devicetree/bindings/pci/xgene-pci.txt
index 92490330dc1c..0f0e3eb64101 100644
--- a/Documentation/devicetree/bindings/pci/xgene-pci.txt
+++ b/Documentation/devicetree/bindings/pci/xgene-pci.txt
@@ -39,11 +39,11 @@ Example:
0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
- interrupt-map-mask = <0x0 0x0 0x0 0x7>;
- interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
- 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
- 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
- 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
+ interrupt-map-mask = <0x0 0x0 0x0 IRQ_INT_ALL>;
+ interrupt-map = <0x0 0x0 0x0 IRQ_INTA &gic 0x0 0xc2 0x1
+ 0x0 0x0 0x0 IRQ_INTB &gic 0x0 0xc3 0x1
+ 0x0 0x0 0x0 IRQ_INTC &gic 0x0 0xc4 0x1
+ 0x0 0x0 0x0 IRQ_INTD &gic 0x0 0xc5 0x1>;
dma-coherent;
clocks = <&pcie0clk 0>;
};
diff --git a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
index 01bf7fdf4c19..5964fdf752bc 100644
--- a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
@@ -47,11 +47,11 @@ nwl_pcie: pcie@fd0e0000 {
interrupt-parent = <&gic>;
interrupts = <0 114 4>, <0 115 4>, <0 116 4>, <0 117 4>, <0 118 4>;
interrupt-names = "msi0", "msi1", "intx", "dummy", "misc";
- interrupt-map-mask = <0x0 0x0 0x0 0x7>;
- interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
- <0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
- <0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
- <0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+ interrupt-map-mask = <0x0 0x0 0x0 IRQ_INT_ALL>;
+ interrupt-map = <0x0 0x0 0x0 IRQ_INTA &pcie_intc 0x1>,
+ <0x0 0x0 0x0 IRQ_INTB &pcie_intc 0x2>,
+ <0x0 0x0 0x0 IRQ_INTC &pcie_intc 0x3>,
+ <0x0 0x0 0x0 IRQ_INTD &pcie_intc 0x4>;
msi-parent = <&nwl_pcie>;
reg = <0x0 0xfd0e0000 0x0 0x1000>,
diff --git a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
index fd57a81180a4..82b7d07bda51 100644
--- a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
@@ -47,11 +47,11 @@ Zynq:
reg = < 0x50000000 0x1000000 >;
device_type = "pci";
interrupts = < 0 52 4 >;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie_intc 1>,
- <0 0 0 2 &pcie_intc 2>,
- <0 0 0 3 &pcie_intc 3>,
- <0 0 0 4 &pcie_intc 4>;
+ interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+ interrupt-map = <0 0 0 IRQ_INTA &pcie_intc 1>,
+ <0 0 0 IRQ_INTB &pcie_intc 2>,
+ <0 0 0 IRQ_INTC &pcie_intc 3>,
+ <0 0 0 IRQ_INTD &pcie_intc 4>;
ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >;
pcie_intc: interrupt-controller {
@@ -72,11 +72,11 @@ Microblaze:
device_type = "pci";
interrupt-parent = <µblaze_0_intc>;
interrupts = <1 2>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie_intc 1>,
- <0 0 0 2 &pcie_intc 2>,
- <0 0 0 3 &pcie_intc 3>,
- <0 0 0 4 &pcie_intc 4>;
+ interrupt-map-mask = <0 0 0 IRQ_INT_ALL>;
+ interrupt-map = <0 0 0 IRQ_INTA &pcie_intc 1>,
+ <0 0 0 IRQ_INTB &pcie_intc 2>,
+ <0 0 0 IRQ_INTC &pcie_intc 3>,
+ <0 0 0 IRQ_INTD &pcie_intc 4>;
ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x10000000>;
pcie_intc: interrupt-controller {
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-11-04 16:39 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-04 16:38 [PATCH v1 0/7] PCI: dt: Remove magic numbers for legacy PCI IRQ interrupts Andrew Murray
2019-11-04 16:38 ` [PATCH v1 2/7] arm64: dts: Use IRQ flags " Andrew Murray
2019-11-06 10:03 ` Liviu Dudau
2019-11-08 14:34 ` Heiko Stuebner
2019-11-09 6:03 ` Wei Xu
2019-11-04 16:38 ` [PATCH v1 3/7] arm: " Andrew Murray
2019-11-05 15:06 ` Linus Walleij
2019-11-05 17:20 ` Jesper Nilsson
2019-11-04 16:38 ` Andrew Murray [this message]
2019-11-05 15:08 ` [PATCH v1 7/7] dt-bindings: PCI: " Linus Walleij
2019-11-05 15:16 ` Andrew Murray
2019-11-06 23:47 ` Rob Herring
2019-11-06 23:47 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191104163834.8932-8-andrew.murray@arm.com \
--to=andrew.murray@arm.com \
--cc=Zhiqiang.Hou@nxp.com \
--cc=agross@kernel.org \
--cc=bhelgaas@google.com \
--cc=david.daney@cavium.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=hayashi.kunihiko@socionext.com \
--cc=heiko@sntech.de \
--cc=hongxing.zhu@nxp.com \
--cc=jesper.nilsson@axis.com \
--cc=jonnyc@amazon.com \
--cc=kernel@pengutronix.de \
--cc=kishon@ti.com \
--cc=l.stach@pengutronix.de \
--cc=lftan@altera.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@axis.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=m.karthikeyan@mobiveil.co.in \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=michal.simek@xilinx.com \
--cc=rfi@lists.rocketboards.org \
--cc=robh+dt@kernel.org \
--cc=ryder.lee@mediatek.com \
--cc=s.hauer@pengutronix.de \
--cc=shawn.lin@rock-chips.com \
--cc=shawnguo@kernel.org \
--cc=songxiaowei@hisilicon.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=tjoseph@cadence.com \
--cc=toan@os.amperecomputing.com \
--cc=wangbinghui@hisilicon.com \
--cc=wangzhou1@hisilicon.com \
--cc=will@kernel.org \
--cc=yamada.masahiro@socionext.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).