Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: "Andreas Färber" <afaerber@suse.de>
To: linux-realtek-soc@lists.infradead.org
Cc: devicetree@vger.kernel.org, "James Tai" <james.tai@realtek.com>,
	"Jason Cooper" <jason@lakedaemon.net>,
	"Andrew Lunn" <andrew@lunn.ch>, "Marc Zyngier" <maz@kernel.org>,
	linux-kernel@vger.kernel.org,
	"Thomas Gleixner" <tglx@linutronix.de>,
	"Andreas Färber" <afaerber@suse.de>,
	linux-arm-kernel@lists.infradead.org,
	"Aleix Roca Nonell" <kernelrocks@gmail.com>
Subject: [PATCH v5 0/9] ARM: Realtek RTD1195/RTD1295/RTD1395 IRQ mux
Date: Thu, 21 Nov 2019 06:01:59 +0100
Message-ID: <20191121050208.11324-1-afaerber@suse.de> (raw)

Hello,

This series adds two IRQ muxes for the Realtek RTD1195, RTD1295 and RTD1395
SoC families.

The implementation is based on register offsets seen in the vendor DT,
split up into two separate nodes, as well as code from QNAP's rtk119x and
Synology's RTD1293/96 GPL code dumps and Banana Bi W2/M4 BSP repositories.

v5 cleans up mask/unmask, ack and naming.

From /proc/interrupts on RTD1195:
 24:        158       iso   2 Edge      ttyS0

From /proc/interrupts on RTD1395:
  9:        110          0          0          0       iso   2 Edge      ttyS0

The chip name now no longer overflows the columns, but irq type is still wrong.

@Realtek: Patch 8/9 contains a question about RTD1395.

More experimental patches at:
https://github.com/afaerber/linux/commits/rtd1295-next

Have a lot of fun!

Cheers,
Andreas

v4 -> v5:
* Renamed enable/disable to unmask/mask (Marc)
* Factored out ack (Marc)
* Clear all interrupts
* Mapped RTD1195 WDOG_NMI
* Added and mapped RTD1295 WDOG_NMI
* Suppress mapping NMIs and reserved bits (Marc)
* Drop mask checks in mask/unmask (Marc)
* Drop mask check in interrupt handler
* Renamed RTD1295 misc bits with MIS_ for consistency
* Renamed RTD1395 misc bits from MISC_ to MIS_ for consistency
* Renamed irq_chip to distinguish iso vs. misc
* Implemented .irq_get_irqchip_state

v3 -> v4:
* Drop no-op .irq_set_affinity callback (Thomas)
* Disable all interrupts (James)
* Updated SPDX-License-identifier
* Use tabular formatting (Thomas)
* Adopt different braces style (Thomas)
* Use raw_spinlock_t (Thomas)
* Shortened callback name (Thomas)
* Fixed of_iomap() error handling
* Don't mask unmapped NMIs
* Cache SCPU_INT_EN (Thomas)
* Renamed binding and source files
* Dropped UART1/UART2 TO interrupts
* Expanded commit messages
* Added RTD1395 patches

v2 -> v3:
* Rebased, adding nodes to rtd129x.dtsi instead of rtd1295.dtsi
* Adopted {readl,writel}_relaxed() (Marc)
* Adopted spin_lock_irqsave() (Marc)
* Implemented RTD1195
* Implemented mapping for non-linear bits such as i2c3

v1 -> v2:
* Rebased, avoiding dependency on reset series for DT nodes
* Don't forward set_affinity to GIC (Marc)
* Added more spinlocks (Marc)
* Code cleanups
* Investigated quirk
* Fixed spinlock initialization (Andrew)

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <maz@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Aleix Roca Nonell <kernelrocks@gmail.com>
Cc: James Tai <james.tai@realtek.com>

Andreas Färber (9):
  dt-bindings: interrupt-controller: Add Realtek RTD1195/RTD1295 mux
  irqchip: Add Realtek RTD1295 mux driver
  irqchip: rtd1195-mux: Implement irq_get_irqchip_state
  arm64: dts: realtek: rtd129x: Add irq muxes and UART interrupts
  irqchip: rtd1195-mux: Add RTD1195 definitions
  ARM: dts: rtd1195: Add irq muxes and UART interrupts
  dt-bindings: interrupt-controller: rtd1195-mux: Add RTD1395
  irqchip: rtd1195-mux: Add RTD1395 definitions
  arm64: dts: realtek: rtd139x: Add irq muxes and UART interrupts

 .../interrupt-controller/realtek,rtd1195-mux.yaml  |  55 +++
 arch/arm/boot/dts/rtd1195.dtsi                     |  20 +
 arch/arm64/boot/dts/realtek/rtd129x.dtsi           |  22 +
 arch/arm64/boot/dts/realtek/rtd139x.dtsi           |  22 +
 drivers/irqchip/Makefile                           |   1 +
 drivers/irqchip/irq-rtd1195-mux.c                  | 512 +++++++++++++++++++++
 6 files changed, 632 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/realtek,rtd1195-mux.yaml
 create mode 100644 drivers/irqchip/irq-rtd1195-mux.c

-- 
2.16.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply index

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-21  5:01 Andreas Färber [this message]
2019-11-21  5:02 ` [PATCH v5 1/9] dt-bindings: interrupt-controller: Add Realtek RTD1195/RTD1295 mux Andreas Färber
2019-11-21  5:02 ` [PATCH v5 2/9] irqchip: Add Realtek RTD1295 mux driver Andreas Färber
2019-11-21  5:02 ` [PATCH v5 3/9] irqchip: rtd1195-mux: Implement irq_get_irqchip_state Andreas Färber
2019-12-12 13:48   ` Marc Zyngier
2019-11-21  5:02 ` [PATCH v5 4/9] arm64: dts: realtek: rtd129x: Add irq muxes and UART interrupts Andreas Färber
2019-11-21  5:02 ` [PATCH v5 5/9] irqchip: rtd1195-mux: Add RTD1195 definitions Andreas Färber
2019-11-21  5:02 ` [PATCH v5 6/9] ARM: dts: rtd1195: Add irq muxes and UART interrupts Andreas Färber
2019-11-21  5:02 ` [PATCH v5 7/9] dt-bindings: interrupt-controller: rtd1195-mux: Add RTD1395 Andreas Färber
2019-11-22 23:34   ` Rob Herring
2019-11-21  5:02 ` [PATCH v5 8/9] irqchip: rtd1195-mux: Add RTD1395 definitions Andreas Färber
2019-11-21  5:02 ` [PATCH v5 9/9] arm64: dts: realtek: rtd139x: Add irq muxes and UART interrupts Andreas Färber

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191121050208.11324-1-afaerber@suse.de \
    --to=afaerber@suse.de \
    --cc=andrew@lunn.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=james.tai@realtek.com \
    --cc=jason@lakedaemon.net \
    --cc=kernelrocks@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-realtek-soc@lists.infradead.org \
    --cc=maz@kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git